KEMIMOTO Heated Socks

KEMIMOTO Heated Socks User Manual

Model: Heated Socks

1. Product Overview

The KEMIMOTO Heated Socks are designed to provide warmth and comfort in cold environments, ideal for activities such as skiing, hunting, motorcycling, and general winter use. These socks feature integrated heating elements, powered by rechargeable lithium batteries, and can be controlled via a mobile application for precise temperature management.

Package Contents

  • 2 x Heated Socks
  • 2 x Rechargeable Lithium Batteries (3000mAh for 7.4V models, 5000mAh for 5V models)
  • 1 x USB Charging Cable
  • 1 x User Manual
KEMIMOTO Heated Socks package contents including socks, batteries, USB cable, and user guide.

Figure 1: Package Contents

2. Specifications

FeatureDescription
Socks MaterialSpandex 15% + Polyester 10% + Nylon 52.5% + Viscose 22.5%
Battery Capacity (7.4V Model)2 x 3000mAh rechargeable lithium batteries
Battery Capacity (5V Model)2 x 5000mAh rechargeable lithium batteries
Battery Working Time4 - 8 hours (depending on heat level)
Voltage7.4V or 5V
Temperature ControlAPP Control, multiple heating levels
Remote Control Effective Distance13 meters
FeaturesWindproof, APP Control, Heated, Rechargeable, Elastic, Breathable

Size Chart

Size chart for KEMIMOTO Heated Socks, showing small and large sizes with measurements in CM, IN, US male/female, and EU shoe sizes.

Figure 2: Size Chart

SizeSocks Length (CM/IN)Socks Height (CM/IN)Suggested US Size (Male)Suggested US Size (Female)Suggested EU Size
Small (S)23.5-31 / 9.25-12.230-46 / 11.8-18.15-6.55.5-8.536-40
Large (L)25.5-35 / 10-13.731.5-48 / 12.4-18.97-9.59.0-10.041-45

Note: It is generally recommended that women wear size S and men wear size L, but always refer to foot length for best fit.

3. Setup Instructions

3.1 Charging the Batteries

  1. Connect the provided USB charging cable to the Type-C charging port on each battery.
  2. Plug the other end of the USB cable into a suitable USB power adapter (not included).
  3. The battery indicator lights will show the charging status. Ensure both batteries are fully charged before first use.
Two KEMIMOTO heated sock batteries being charged simultaneously using a double-ended Type-C charging cable plugged into a wall adapter.

Figure 3: Charging the Batteries

3.2 Wearing the Socks and Connecting Batteries

  1. Identify the left (L) and right (R) socks using the indicators.
  2. Put on the heated socks. The socks are elastic and designed to fit comfortably.
  3. Locate the battery pocket on the upper cuff of each sock.
  4. Connect the DC 3.5 out port from the sock's internal cable to the corresponding port on the charged battery.
  5. Place the battery securely into the sock's pocket and fasten the button to prevent it from falling out.
Diagram showing the steps to use the heated socks: 1. Charge the battery. 2. Put on the socks. 3. Connect the battery. 4. Use the battery to adjust temperature. 5. For APP control, turn on Bluetooth.

Figure 4: How to Use Heated Socks

Close-up image showing 'L' and 'R' indicators on the socks to differentiate left and right.

Figure 5: Left and Right Sock Indicators

4. Operating Instructions

4.1 Power On/Off

To turn the battery on or off, press and hold the power button on the battery for 3 seconds.

Close-up of the battery pack showing the power button and charging ports. Text indicates to press and hold for 3 seconds to turn on/off.

Figure 6: Battery Power Button

4.2 APP Control

For convenient temperature adjustment, download the KEMIMOTO Heated Socks APP. Scan the QR code provided in the physical user guide to download the application. Ensure your mobile phone's Bluetooth is enabled to connect to the socks.

A person using a smartphone with the KEMIMOTO Heated Socks app open, showing temperature control and settings.

Figure 7: APP Control Interface

4.3 Temperature Settings

The socks offer multiple heating levels, which can be adjusted via the APP or directly from the battery (if applicable to your model). The heating elements are strategically placed around the toe area for 360-degree warmth.

Diagram showing heat distribution in the KEMIMOTO Heated Socks, with arrows indicating warmth around the foot and toe area.

Figure 8: 360-degree Heating

7.4V 3000mAh Battery Model (4 Levels)

Image showing the 7.4V 3000mAh battery connected to a sock, with a table detailing 4 temperature levels and their corresponding endurance times.

Figure 9: 7.4V Model Temperature Settings

Light StatusCurrent ModeReference TemperatureReference Endurance
●●●●IV (Higher)60-65℃ (140-149Β°F)3-4 hours
●●●○III (High)50-55℃ (122-131Β°F)5-6 hours
●●○○II (Medium)40-45℃ (104-113Β°F)6-7 hours
●○○○I (Low)38-40℃ (100-104Β°F)8-10 hours

Note: The above data are laboratory test data at room temperature of 25℃ (77Β°F).

5V 5000mAh Battery Model (3 Levels)

Image showing the 5V 5000mAh battery with a table detailing 3 temperature levels and their corresponding endurance times.

Figure 10: 5V Model Temperature Settings

Light StatusCurrent ModeReference TemperatureReference Endurance
●●●365 Β± 3℃ (149Β°F)4-4.5 hours
●●○255 Β± 3℃ (131Β°F)5.5-6.5 hours
●○○145 Β± 3℃ (113Β°F)7.3-8.5 hours

5. Maintenance

5.1 Cleaning Instructions

The heated socks are machine and hand washable. Follow these guidelines for proper cleaning:

  1. Important: Always remove the batteries from the sock pockets before washing.
  2. Fasten the button on the battery compartment before washing to prevent damage.
  3. For machine washing, place the socks in a mesh laundry bag to protect them.
  4. Wash in cold water.
  5. Do not dry clean.
  6. Do not bleach.
  7. Do not iron.
  8. Do not wring or twist the socks.
Instructions for washing KEMIMOTO Heated Socks, showing machine washing with a laundry bag and hand washing in cold water, along with symbols for 'Do not Dry clean', 'Do not Bleach', 'Do not Iron', 'Do not Wring or twist'.

Figure 11: Cleaning Instructions

6. Troubleshooting

  • Socks not heating:
    • Ensure batteries are fully charged.
    • Verify that the batteries are correctly connected to the sock cables.
    • Confirm the battery is powered on (press and hold the button for 3 seconds).
    • Check the APP settings to ensure a heating level is selected.
  • APP not connecting:
    • Ensure your mobile device's Bluetooth is enabled.
    • Make sure the sock batteries are powered on.
    • Try restarting the APP and your mobile device.
    • Ensure you have downloaded the correct APP by scanning the QR code in the user guide.
  • Battery not charging:
    • Ensure the USB cable is securely connected to both the battery and the power source.
    • Try a different USB power adapter or USB port.
    • Check the USB cable for any visible damage.

7. User Tips

  • For optimal performance, fully charge both batteries before each use, especially for extended outdoor activities.
  • Always use the provided USB charging cable to ensure compatibility and safety.
  • Utilize the APP control feature for precise temperature adjustments without needing to access the battery directly.
  • The socks are designed to be elastic and comfortable, suitable for various shoe and boot types.
  • Remember to differentiate between the left and right socks using the 'L' and 'R' indicators for the best fit and heating experience.
  • The practical design of the battery pocket with a buckle helps prevent the battery from falling out during movement.

8. Warranty and Support

KEMIMOTO Heated Socks come with a 1-year limited warranty. For any product inquiries, technical support, or warranty claims, please contact the manufacturer or your seller directly. Provide your purchase details and a description of the issue for efficient assistance.

9. Product Demonstration Video

Watch this video for a visual guide on unboxing, setup, operation, and maintenance of your KEMIMOTO Heated Socks.

Video 1: KEMIMOTO Heated Socks Product Demonstration


KEMIMOTO Heated Socks: Smart App Control, Rechargeable, and Washable

KEMIMOTO Heated Socks: Smart App Control, Rechargeable, and Washable

0:33 β€’ 1280Γ—720 β€’ instructions
KEMIMOTO Heated Socks: Unboxing, Features, and Smart Temperature Control

KEMIMOTO Heated Socks: Unboxing, Features, and Smart Temperature Control

0:33 β€’ 1280Γ—720 β€’ visual_overview
KEMIMOTO Heated Socks App Setup & Operation Guide | Connect & Control Smart Heated Socks

KEMIMOTO Heated Socks App Setup & Operation Guide | Connect & Control Smart Heated Socks

1:13 β€’ 1920Γ—1080 β€’ setup

Related Documents - Heated Socks

Preview KEMIMOTO Heated Gloves User Guide - Operation, Cleaning, and Safety Instructions
Comprehensive user guide for KEMIMOTO Heated Gloves. Learn about included items, operation, heat settings, battery charging, cleaning instructions, and important safety precautions.
Preview KEMIMOTO-6S, KEMIMOTO-2S, KEMIMOTO-4S ATV/UTV Sound Bar User Guide
This user guide provides comprehensive instructions for the KEMIMOTO-6S, KEMIMOTO-2S, and KEMIMOTO-4S All-Terrain Speaker Systems. It covers product features, installation, Bluetooth pairing and operation, AUX and USB input, remote control functions, troubleshooting common issues, and technical specifications. Learn how to set up and enjoy your KEMIMOTO soundbar for an enhanced ATV/UTV audio experience.
Preview KEMIMOTO HEATED VEST User Guide
User guide for the KEMIMOTO HEATED VEST, providing instructions on operation, cleaning, battery care, voice commands, app usage, and troubleshooting. Includes safety information and warranty details.
Preview Kemimoto B0117-03001BK Product Manual and Installation Guide
Comprehensive product manual for the Kemimoto B0117-03001BK vehicle audio system, detailing installation, wiring, and operation for the KEMIMOTO-T1 speaker system.
Preview KEMIMOTO Heated Pants User Guide - Model NR2012
Official user guide for KEMIMOTO Heated Pants (Model NR2012). Provides instructions on setup, operation, heat settings, battery charging, app control, cleaning, and safety precautions.
Preview Kemimoto B0113-09801BK Storage Box Installation Manual
This manual provides step-by-step instructions for installing the Kemimoto B0113-09801BK storage box. It includes a parts list, important safety information, and detailed installation tips with diagrams.