Kemimoto Product Manual

Step 1

Assemble fixing fixture [2] and bracket-1 [3] with two M5x20 screws [4], M5 nuts [5] and M5 spring washer [8].

Diagram illustrating the assembly of fixing fixture and bracket-1.

Step 2

Turn the box [1] upside down. Install two brackets-1 [3] and two brackets-2 [7] to the bottom of the box [1] with eight M6x16 screws [6], M6 spring washers [9] and M6 flat washers [10].

Diagram showing the box turned upside down with brackets being attached.

Step 3

Install the box [1] to vehicle. Make sure fixing fixtures [2] and brackets-2 [7] are in their respective holes and the box [1] is in the middle of the rack.

Diagram showing the storage box being mounted to the vehicle rack.

Note: If you find a gap between the bottom of the box [1] and the vehicle, please add some EVA pads [11] to eliminate the gap. ?

Step 4

Lock the two fixing fixtures [2] to secure the box [1]. Finish installation. ✔️

Diagram showing the final securing of the storage box.