1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Rollerhouses DC2700 (1-channel) or DC2702 (15-channel) RF remote control for motorized roller shades. Please read this manual thoroughly before using the product to ensure proper function and longevity.
2. Safety Information
- Keep the remote control away from water and high humidity.
- Do not expose the remote control to direct sunlight or extreme temperatures.
- Do not attempt to disassemble or repair the remote control yourself. Contact qualified personnel for service.
- Keep batteries out of reach of children.
3. Product Overview
The Rollerhouses DC2700 and DC2702 are RF (Radio Frequency) remote controls designed to operate motorized roller shades. The DC2700 offers single-channel control, while the DC2702 provides multi-channel control for up to 15 groups of shades.
3.1. Package Contents
- 1 x DC2702/DC2700 RF Controller
- 1 x Back Holder (for wall mounting)
3.2. Remote Control Layout
4. Setup
4.1. Battery Installation
The remote control comes with a pre-installed 3V CR2450 button battery. If replacement is needed, follow these steps:
- Remove the remote cover by sliding it downwards in the direction of the arrow.
- Carefully remove the old CR2450 battery.
- Insert the new 3V CR2450 button battery, ensuring correct polarity.
- Close the back cover by sliding it back into place until it clicks securely.
4.2. Wall Mounting
The remote control includes a back holder for convenient wall mounting. After installation, you can easily hang the remote control on the wall for easy access.
5. Operating Instructions
5.1. Basic Shade Control
Use the primary buttons to control your motorized shades:
- UP button (▲): Raises the shade.
- DOWN button (▼): Lowers the shade.
- STOP button (−): Stops the shade at its current position.
5.2. Channel Selection (DC2702 - 15 Channel Controller)
The DC2702 allows you to control up to 15 individual shades or groups of shades. Use the P1- and P1+ buttons to cycle through the channels. The selected channel number will be displayed on the LED screen. Once the desired channel is selected, use the UP, DOWN, and STOP buttons to control the corresponding shade(s).
5.3. Pairing with Motorized Shades
The pairing process typically involves a specific sequence of button presses on both the remote and the shade motor. Refer to your motorized shade's instruction manual for detailed pairing instructions. Generally, it involves:
- Putting the shade motor into pairing mode (often by pressing a button on the motor itself).
- Pressing a specific button or sequence on the remote control to send the pairing signal.
Note: This remote is a universal controller for shade motors. Ensure the shape and frequency (433.92MHz) are compatible if replacing with other brands, otherwise it may not work or pair.
6. Maintenance
The primary maintenance for your remote control is battery replacement. Refer to Section 4.1 for detailed instructions on how to replace the 3V CR2450 button battery. Clean the remote with a soft, dry cloth. Do not use abrasive cleaners or solvents.
7. Troubleshooting
- Remote not responding: Check the battery. Replace if necessary (see Section 4.1). Ensure you are within the operating range (up to 115 feet indoors, 655 feet in open field).
- Shades not moving: Verify the remote is paired correctly with the shade motor. Check the shade motor's power supply.
- 15-channel remote not controlling the correct shade: Ensure you have selected the correct channel using the P1- and P1+ buttons.
- Interference: If experiencing intermittent control, ensure there are no strong RF interference sources nearby.
8. Specifications
| Feature | Specification |
|---|---|
| Model Numbers | DC2700 (1 Channel), DC2702 (15 Channel) |
| Brand Name | Rollerhouses |
| Frequency | 433.92MHz |
| Radiation Power | ≤10mW |
| Working Temperature | -10°C to +50°C |
| Battery Type | 3V CR2450 Button Battery (Included) |
| Voltage | 5V/2A (for power source, not battery) |
| Wattage | 1W |
| Dimensions (approx.) | Length: 5.12 inches, Width: 1.77 inches, Thickness: 0.433 inches |
| Origin | Mainland China |
8.1. Non-Compatible Brands
The remote control is NOT compatible with the following brands:
- Somfy brand Shade
- Graber and Bali Shades
- Sivola Triathlon Shades
- Rollease Acmeda shade motors
- Tucson DC1602b
- Lutron's Sivola QED
- Levelor motorized sheer shades
- Select blinds
- 3 day blinds
9. User Tips
- For optimal performance, ensure a clear line of sight between the remote and the shade motor, especially in environments with potential signal obstructions.
- When controlling multiple shades with the 15-channel remote, label your channels for easy identification.
- Keep a spare CR2450 battery on hand for quick replacement.
10. Support
For further assistance or inquiries, please contact Rollerhouses customer support. Keep your product model number (DC2700 or DC2702) handy when contacting support.
