1. Setup Instructions
1.1 Battery Installation
The remote control requires two AAA batteries (not included) for operation. Follow these steps to install them:
- Locate the battery compartment on the back of the remote control.
- Slide the battery compartment cover downwards or in the direction indicated by the arrow to open it.
- Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Close the battery compartment cover by sliding it back into place until it clicks securely.
1.2 Initial Use
This remote control is designed as a direct replacement and typically does not require programming. Once batteries are installed, point the remote control towards your compatible BLAUPUNKT, JMB, or SABA LED TV and begin operation.
2. Operating Instructions
The remote control features a standard layout for easy navigation and control of your television. Below is a general overview of the buttons and their functions:
- Power Button (Red): Turns the TV on or off.
- Number Keys (0-9): Directly select channels.
- DTV/RADIO/USB/DVD Buttons: Select input sources or switch modes.
- Volume Up/Down (VOL +/-): Adjust the sound volume.
- Channel Up/Down (CH +/-): Change TV channels.
- Mute Button: Mutes or unmutes the TV sound.
- Menu Button: Accesses the TV's main menu.
- Navigation Buttons (Up, Down, Left, Right, OK): Navigate through menus and confirm selections.
- Exit Button: Exits the current menu or function.
- Source Button: Cycles through available input sources (HDMI, AV, etc.).
- Info Button: Displays information about the current program or input.
- Aspect Button: Adjusts the screen aspect ratio.
- Sleep Button: Sets a sleep timer for the TV.
- Audio Button: Selects audio tracks or modes.
- Subtitle Button: Toggles subtitles on or off.
- Zoom Button: Adjusts screen zoom level.
- Media Control Buttons (Play, Pause, Stop, Rewind, Fast Forward, Previous, Next): Control media playback from connected devices or USB.
- Color Buttons (Red, Green, Yellow, Blue): Provide additional functions depending on the TV menu or application.
- 3D Button: Activates or deactivates 3D display function (if supported by TV).
3. Maintenance
3.1 Cleaning
To clean the remote control, use a soft, dry cloth. For stubborn dirt, slightly dampen the cloth with water or a mild, non-abrasive cleaner. Avoid using harsh chemicals or abrasive materials, as these can damage the remote's surface or buttons.
3.2 Battery Replacement
Replace batteries when the remote control's response becomes sluggish or stops working. Always replace both AAA batteries at the same time with new ones. Do not mix old and new batteries, or different types of batteries.
3.3 Storage
If the remote control will not be used for an extended period, remove the batteries to prevent leakage, which can damage the device. Store the remote in a cool, dry place away from direct sunlight and extreme temperatures.
4. Troubleshooting
4.1 Remote Control Not Responding
- Check Batteries: Ensure batteries are correctly installed and not depleted. Replace with fresh AAA batteries if necessary.
- Line of Sight: Make sure there is a clear line of sight between the remote control and the TV's infrared sensor. Obstructions can block the signal.
- Distance: Operate the remote within a reasonable distance from the TV.
- TV Sensor: Ensure the TV's infrared sensor is not blocked or dirty.
4.2 Specific Buttons Not Working
- Clean Buttons: Dirt or debris might be lodged under the buttons. Gently clean around the affected buttons.
- Battery Check: Low battery power can sometimes cause intermittent button functionality. Replace batteries.
5. Specifications
| Feature | Specification |
|---|---|
| Brand Name (Remote) | WYMECT |
| Material | ABS |
| Color | Black |
| Battery Type | 2 x AAA batteries (not included) |
| Product Size | 218 x 48 x 20 mm (8.58 x 1.89 x 0.79 inches) |
| Frequency | 433 MHz |
| Channel | 3 |
| Wireless Communication | IR (Infrared) |
| Use | TV |
| Support APP | No |
| Origin | Mainland China |
| Applicable TV Models | BLAUPUNKT 23/157I-GB-3B-HBCDUP, 32/131J-GB-1B-3HCU-UK, 42/131J-GB-1B-F3HCU-UK, JMB, SABA LED TVs |
6. User Tips
- Verify Compatibility: Before use, ensure your TV model is listed as compatible to guarantee full functionality.
- Optimal Performance: For best performance, always point the remote directly at your TV's IR receiver.
7. Warranty and Support
For any issues not covered in this manual, or for further assistance, please contact the seller or manufacturer directly. Keep your purchase records for potential warranty claims. Specific warranty terms may vary and are typically provided at the point of purchase.
