1. Introduction
This manual provides essential instructions for the safe and efficient operation of your A-OK AC123 series remote controller. These remote controllers are designed for wireless control of A-OK brand built-in RF433 electric curtain motors. Please read this manual thoroughly before use and retain it for future reference.
Important Note: This remote controller is exclusively compatible with A-OK brand built-in RF433 motors. Please verify compatibility before attempting to use.
2. Product Overview
The A-OK AC123 series offers various remote controller models, including handheld transmitters and wall-mounted emitters, to suit different control needs for your smart curtain system.
The series includes:
- AC123-01: One-channel handheld remote controller.
- AC123-02: Dual-channel handheld remote controller.
- AC123-06: Six-channel handheld remote controller with numbered indicators.
- AC123-16: Sixteen-channel handheld remote controller with a digital display.
- AC125-01: Single-channel wall-mounted emitter.
- AC126-01: Double-channel wall-mounted emitter.
3. Specifications
| Feature | Specification |
|---|---|
| Brand | AOk |
| Model Numbers | AC123-01, AC123-02, AC123-06, AC123-16, AC125-01, AC126-01 |
| Frequency | 433.92 MHz |
| Wireless Distance | >80 meters (open area) |
| Battery Type (AC123-01/02/06, AC125-01) | 3V (CR2032) |
| Battery Type (AC123-16) | 3V (CR2045) |
| Battery Type (AC126-01D) | 27A (12V) |
| Battery Included | No |
| Origin | Mainland China |
4. Setup
4.1. Battery Installation
The remote controllers do not come with batteries installed. Please install the correct battery type for your specific model:
- For AC123-01, AC123-02, AC123-06, AC125-01: Use a 3V CR2032 coin cell battery.
- For AC123-16: Use a 3V CR2045 coin cell battery.
- For AC126-01D: Use a 12V 27A battery.
To install the battery:
- Locate the battery compartment cover on the back of the remote.
- Open the cover (you may need a small screwdriver or coin).
- Insert the battery with the correct polarity (+/-) as indicated inside the compartment.
- Close the battery compartment cover securely.
4.2. Pairing with Motor
The pairing process for the remote controller with your A-OK electric curtain RF motor is typically initiated from the motor unit itself. Specific pairing instructions are usually provided with your A-OK motor. Generally, the process involves:
- Putting the motor into pairing mode (often by pressing a button on the motor or cycling power).
- Pressing a specific button or sequence of buttons on the remote controller within a short timeframe.
Refer to your A-OK electric curtain motor's instruction manual for detailed pairing procedures.
5. Operating Instructions
The A-OK remote controllers feature intuitive buttons for controlling your electric curtains.
5.1. Basic Controls (All Models)
- ▲ (Up Arrow): Press to raise or open the curtain.
- ■ (Stop/Pause): Press to stop the curtain at its current position.
- ▼ (Down Arrow): Press to lower or close the curtain.
5.2. Multi-Channel Controls (AC123-02, AC123-06, AC123-16, AC126-01)
For multi-channel remotes, you can control multiple curtain motors independently or in groups.
- < (Channel Down): Press to decrease the selected channel number.
- > (Channel Up): Press to increase the selected channel number.
The selected channel will be indicated by a number on the remote (e.g., LED indicators on AC123-06, digital display on AC123-16).
6. Maintenance
To ensure the longevity and optimal performance of your remote controller:
- Battery Replacement: Replace batteries when the remote's range decreases or it becomes unresponsive. Always use the specified battery type for your model. Dispose of old batteries responsibly.
- Cleaning: Wipe the remote with a soft, dry cloth. Do not use abrasive cleaners or immerse the remote in water.
- Storage: Store the remote in a dry place, away from direct sunlight and extreme temperatures.
7. Troubleshooting
If you encounter issues with your A-OK remote controller, try the following:
- Remote not responding:
- Check if the battery is correctly installed and has sufficient charge. Replace if necessary.
- Ensure the remote is within the operating range (>80 meters in open area, but walls and obstacles can reduce this).
- Verify that the remote is correctly paired with the motor. Refer to your motor's manual for pairing instructions.
- Curtain not moving as expected:
- For multi-channel remotes, ensure the correct channel is selected.
- Check for any physical obstructions preventing the curtain from moving.
- Compatibility Issues:
- Confirm that your motor is an A-OK brand built-in RF433 motor. This remote is not compatible with other brands or different RF frequencies (e.g., Somfy RTS motors).
8. User Tips
- Verify Motor Type: Always confirm your curtain motor is an A-OK brand with RF433 capability before purchasing or attempting to pair this remote. This is the most common reason for compatibility issues.
- Battery Check: Keep spare batteries on hand, especially for the less common CR2045 and 27A (12V) types.
- Visual Guidance: If you are new to smart curtain systems, searching for official A-OK setup or operation videos online can provide helpful visual demonstrations.
9. Warranty and Support
9.1. Warranty Information
This A-OK remote controller comes with a 1-year manufacturer's limited warranty for defective items, excluding items damaged or misused after receipt. Accessories, such as the remote itself, typically come with a 3-month warranty.
Defective items must be reported and returned within the warranty period, preferably in their original packaging. Please provide your order number and a description of the defect when contacting support.
9.2. Customer Support
For further assistance, technical support, or warranty claims, please contact your retailer or the A-OK customer service department. Refer to the contact information provided with your purchase or on the official A-OK website.
