Instructions
Sabbat
Manufacture: Shenzhen Sabbat
Technology Development Co. LTD
Product Schematic Diagram
Package list
• Bluesooth headset ( 2PCS )
• Power storage room
• USB charging line
• Instruction
• Exquisite packaging
• Product qualification certificate
Wearing a Sketch
Product specification
• Name: Sabbat Music wireless Bluetooth headset
• Bluetooth name: Sabbat X12
• Version: 4.1+EDR
• Input: DC 5V
• Battery Capacity: 3.7V/60mAh
• Talking Time: About 2-3 Hours
• Charging Time): About 60 Min
• Rechargeable warehouse: 3.7V / 750mAh
• Profile Support: 115P/HFP/A2DP/AVACP
• Sensitivity: 120 ± 5dB
• Frequency Response: 20-20000Hz
• Impedance: 320
Products use
Bluetooth pairing
1. Press and hold the power button on the earphones for 5-10 seconds until red and blue lights flash at she same.
2. Double—click any headset (host) power button, red and blue lights alternately flash, waiting for the left and right headphones automatically pair.
3. The earphones connect successfully with your phone when only blue lights showing on the earphones.
Sabbat X12 wirless earphones charging instructions :
1. Firstly charge the charging cabin: connect the cabin with the power adapter through the charging cable that enclosed with the earphones. When the cabin is fully charged LED lights will stay red.
2. Secondly charge the earphones through cabin: put the earphones inside the cabin correctly, when the earphones are under charging both LED lights on the cabin and earphones will flash red. When the earphones are fully charged, LED lights on the earphones will tum blue and stay for 5 seconds and LED lights on the cabin will turn off 10 seconds later.
Bluetooth link Turn on the phones Bluetooth search scan to ” Sabbat X12 ” and click connect
- The earphones will automatically connect with same phone the next time you turn on Bluetooth on the phone.
- If you want to connect the earphones with another phone, please follow up the above steps.
1. Listen to the music
* When headphones boot and and mobile phone connection, can use mobile phones to listen to music.
* Press the open key in the process of music, music on hold. Press will continue to play the music again.
* Music played in the process, double click to open the key, will play the neat song music.
2. Call
* When the headphones on and connected to the phone, can answer the call. Pick up the phone and only one headset week.
* When calls, voice telephone number. click having calls prompt headphones for the key, can answer the phone, if long according to decline a cal
* Phone in the process, press the open key, will hang up the phone, to go back to the previous state.
*Phone in the process, the volume can be adjusted through the phone call.
3. OFF
* Long press the headset key 5 seconds, the LED display normally on a red light, then turn it off.
* When about headphones matching use, only need to due to nun it off with one of the headphones, another headset will automatically shut down.
Matters needing attention
1. The headset should be stored in a dry and ventilated environment, to avoid oil, water, steam, moisture and dust, such as contact, lest affect product performance.
2. Avoid using stimulus, organic solvents or items containing these ingredients, dean the headphones.
3. The use of headphones should be correctly according to the requirement specification, pay attention to use the influence of environment on the headphones. In order to ensure the smooth connection it is recommended that the distance between the phone and headset within 10 meters.
4. Connect the headphones have not or poor communications, and other problems, please do not remove the headset secretly ontology and its accessories, otherwise no warranty.
5. Recharge headphones, please choose the standard USB charging lite or the company specified in conformity with the requirements of charging cable.
6. To ensure that your normal use headphones, please make sure that the headset battery is enough.
Warranty Description
Thank you for purchasing “Sabbat” brand products in order to ensure that the legitimate lights and interests of you, please be informed that to mad the following items:
• This card warranty certificate foe the product, the product need for maintenance, please be sure to provide this ..rd. together with the products our company after-sales.
• When this card is only effective use for warranty within the scope of the products, see below:
1. Through legal, formal channels for the company’s products,
2. The non-artificial damage products, including but not limited to remove secretly, improper use, manual disasters and other circumstances not within the scope of the warranty:
3. Does not exceed the product warranty:-
• Low considerations include and not limited to above.
• When the company reserves the final interpretation.
Questions about your Sabbat X12 Bluetooth Headphones User Manual? Post in the comments!
…….
References
- User Manualmanual.tools
what will i do if the led light of cabin box does not light.
What should I do if the LED light on the charging cabin box does not light up?
If the LED light on your Sabbat X12 charging cabin (power storage room) is not lighting up, please check the following based on the manual's charging instructions:
If the cabin fails to light up even when connected to a known working power source and cable, it may indicate a hardware issue. The manual advises against removing the headset or accessories yourself, as this will void the warranty.
Read the full Q&A page
I’m having the same problem, when I put the right phone in the booth that has no battery, his lights don’t turn on and he doesn’t charge
estou tendo o mesmo problema, quando coloco o fone direito na cabine que está sem bateria, as luzes dele nao acendem e ele nao carrega
My headphones aren’t not paired up with each other any longer, only 1 headphone is playing the music while the other stays silent. Tried holding the Power buttons for 5 – 10 seconds but the headphones won’t flash alternately. How do I get the headphones to work once again?
How do I fix my Sabbat X12 headphones when they are not paired with each other and only one side plays music?
To resolve the issue where only one earbud is playing music, you need to re-establish the connection between the left and right units. Follow these steps based on the Sabbat X12 manual:
If the lights do not flash alternately after the double-click, ensure the earbuds are fully charged by placing them in the charging cabin until the LED indicators show they are ready.
Read the full Q&A page
Can someone help me, I was unlinked in the right hearing aid and now I cannot link it as I do
Alguien me puede ayudar se me desvinculó en audífono derecho y ahora no puedo vincularlo como hago
Alguien me puede ayudar se me desvinculó en audífono derecho y ahora no puedo vincularlo como hago
How do I re-pair the right earbud of my Sabbat X12 headphones if it has become unlinked?
To re-link your Sabbat X12 earbuds so they work together again, please follow these steps:
If successful, the earbuds will automatically connect to each other and your phone in the future. Ensure both earbuds are sufficiently charged before starting this process.
Read the full Q&A page
How to turn on the game mode? I once encountered it when I was randomly clicking the buttons, then I forgot how I did it.
How do I activate game mode on Sabbat X12 headphones?
Based on the standard Sabbat X12 user manual, there is no official "Game Mode" listed in the basic controls. However, for Sabbat models that feature a low-latency Game Mode (such as the X12 Ultra or Pro versions), the mode is typically toggled by tapping either earbud button 4 times in quick succession.
If your specific version supports this feature, you should hear a voice prompt saying "Game Mode" or "Gaming Mode" after the fourth click. To switch back to standard music mode, repeat the 4-click sequence. Please note that the base Sabbat X12 (Bluetooth 4.1) described in this manual may not support this feature, as it is more common in the upgraded Bluetooth 5.0/5.2 "Ultra" models.
Read the full Q&A page
estos auriculares sólo sirven para teléfonos?? No sirven para tabletas??
Are these headphones only for phones, or do they work with tablets as well?
Yes, the Sabbat X12 headphones work with tablets as well as smartphones. Although the manual frequently mentions "phones," these headphones use standard Bluetooth 4.1+EDR technology, which is compatible with any Bluetooth-enabled device, including tablets (iPad, Android tablets), laptops, and computers.
To connect them to your tablet, follow the same pairing process:
Read the full Q&A page