FC30 Arcade Joystick
Everything old is new again
1. To enter pairing mode, press and hold HOME + A for 3 seconds. The blue LED will rapidly blink.
2. Enter your iOS devices Bluetooth settings. Pair with [8Bitdo Joy].
3. The LED will be solid blue when the connection is successfull.
macOS / Windows / Android
1. To enter pairing mode, press and hold HOME for 3 seconds. The blue LED will rapidly blink.
2. Enter your devices Bluetooth settings. Pair with [8Bitdo Joy].
3. The LED will be solid blue when the connection is successful.
Note: USB OTG might be needed with some Android devices
1. Press and hold HOME for 3 seconds. The blue LED will rapidly blink.
2. Connect the Micro USB cable to your controller and preferred device please.
Note: your iOS device must be in English
Low battery mode
Battery fully charged
Red blinking LED
Green blinkine LED
Green LED turns off
To upgrade the firmware, please visit: www.Bbitdo.com
We are continuously developing and providing additional support for new game systems and products
Please visit www.Bbitdo.com for more information on how to update your controller with unique features.
1. Please visit our official website for up to date information.
2. Please charge the controller for 20 minutes before using it again if it has been put away for a lengthy perlod of time.
3. To avoid any physical damage of the controller, please ensure to keep it in a clean and dry place, away from high temperature, grease or any chemical substance.
Height: 231 mm 19.09 inches)
Depth: 59 mm (2.32 inches)
Connectivity : Wireless Bluetooth, Micro-USB
Range : 10 Meters
Compatibility : mac OSX, Windows, ios, Android
Battery Type : Built-in 1000 mAh Li-on, rechargeable
Battery Life : 40 Hours with 1-2 hour charging time
Controller Modes : Bluetooth Keyboard, iCade, Android Joystick, Emu-Touch Screen.
Weight : 2.980 kg with packaging