8Bitdo N30 Pro / F30 Pro User Manual

N30 Pro and F30 Pro

Instruction Manual

Bluetooth Connection

Controllers will auto reconnect to your devices once they have been paired

Android (D-input)

1. Press and hold POWER for 1 second to power on the controller, LEDs will blink once per cycle.
2. Press and hold PAIR for 3 seconds to enter pairing mode. Blue LEDs will rapidly blink.
3. Go to your Android device’s Bluetooth setting, pair with [8Bitdo xx Pro].
4. LEDs will be solid blue when connection is successful.
USB Connection:connect your 8Bitdo controller to your Android device via USB Cable after step 1

Windows (X-input)

1. Press and hold POWER + X for 1 second to power on the controller, LEDs will blink twice per
cycle.
2. Press and hold PAIR for 3 seconds to enter pairing mode. Blue LEDs will rapidly blink.
3. Go to your Windows device’s Bluetooth setting, pair with [8Bitdo xx Pro(x)].
4. LEDs will be solid blue when connection is successful.
USB Connection:connect your 8Bitdo controller to your Android device via USB Cable after step1

macOS

1-Press and hold POWER + A for 1 second to power on the controller,
LEDs will blink three times per cycle
2-Press and hold PAIR for 3 seconds to enter pairing mode.Vlue LEDs will rapidly blink
3-Go to your macOS device’s Bluetooth setting ,pair with [Wireless Controller]
4-LEDs will be solid blue when connection is successful.
.USB connection : connect your 8Bitdo controller to your macOS device via USB cable after step1

Switch (by default)

1.press and hold POWER+Y for 1 second to power on the controller,
LEDs will blink four times per cycle

2.Go to your Switch Home Page to click on Controllers,then click on Change Grip/Order
3.Press and hild PAIR for 3 seconds to enter pairing mode.Blue LEDs will rapidly blink
4.LEDs will be solid blue when connection is successful
.When Connected to your Switch ,POWER button = Switch HOME button;
PAIR button = Switch screenshot button

Battery

Status LED indicator
Low battery mode LEDS blink in red
Battery Charging LEDS blink in Green
Battery fully charged LEDs stop blinking in green
  • Built-in 480 mAh Li-on with 18 Hours of play time.
  • Rechargeable via USB cable with 1-2 hour charging time.
  • Press POWER for 8 seconds to force turn off your controller

Power Saving

  1. Sleep mode -1 minute with no bluetooth connection
  2. sleep mode – 15 minutes with Bluetooth connection but no use
  3. Press POWER to wake up your controller

Support

.Please visit http://support.8bitdo.com for further information and additional support

 

Leave a comment

Your email address will not be published. Required fields are marked *