8BitDo 64 Bluetooth Controller

 Product Description

• Prass the Sbrtbuttan to tum on the corrtrallsr.
• Hold ihe &tart button for3 seconds to tum off the controller.
• Hold the start buttan for8 seconds to force controller to sl’llt down.

Bluetooth Conneation

1. Turn the Mode switch to D position.
2. Press the Start button to turn on the controller.
3. Press and hold the Pair button on the controller for 3 seconds to enter the pairing mode, the Status LEDs will blink rapidly. (This is required for the very first time only)
4. Press the Pair button on the front of Analogue30 and the Player LED on the system will begin to blink.
5. The controller will automatically pair and connect. The Status LEDs on the controller and Player LED on Analogue30 will remain solid to indicate a successful connection. The controller will now always connect automatically when powered on.

Wired Connection

• Turn the Mode switch to D position.
• Connect the controller to Analogue30 via a USB-A to USB-C cable and the Player LED on the system will remain solid. The controller is connected for the indicated player.

 Switch

• The Switch system needs to be updated to the latest version.
• The controller will be detected as a Switch Online N64 controller.

Bluetooth Connection

1. Turn the Mode switch to S position.
2. Press the Start button to turn on the controller.
3. Press and hold the Pair button for 3 seconds to enter the pairing mode, the Status LEDs will blink rapidly. (This is required for the very first time only)
4. On the Switch Home Menu, click on “Controllers”, then click on “Change Grip/Order”, it will await a controller connection.
5. The Status LEDs will remain solid to indicate a successful connection.

Wired Connection

• Please ensure the “Pro Controller Wired Communication” is enabled in the Switch system settings.

1. Turn the Mode switch to S position.
2. Connect the controller to your Switch system via a USB cable and wait until the controller is successfully recognized by the system.

 Android / Windows

Bluetooth Connection

1. Turn the Mode switch to D position.
2. Press the Start button to turn on the controller.
3. Press and hold the Pair button for 3 seconds to enter the pairing mode, the Status LEDs will blink rapidly. (This is required for the very first time only)
4. Make sure Bluetooth is turned on in your Android / Windows device’s Bluetooth settings, and pair with “8BitDo 64 BT”.
5. The Status LEDs will remain solid to indicate a successful connection.

Wired Connection

1. Turn the Mode switch to D position.
2. Connect the controller to your Android / Windows device via a USB cable and wait until the controller is successfully recognized by the device.

Turbo Function

• The D-pad, Joystick/L3, Home button, Select button, and Start button are not supported for turbo function.
• The Status LEDs will blink continuously when the configured button is pressed.
• The turbo settings will not be saved permanently and will revert to default settings after the controller is powered off or disconnected.

Turbo Mode

• Turn on: Hold the button you would like to assign the turbo functionality to, then press the Select button to enable the Turbo Mode, the Status LEDs will blink continuously.
• Turn off: Hold the button you would like to deactivate the turbo functionality on, then press the Select button to disable the Turbo Mode, the Status LEDs will stop blinking.
  

Auto Turbo Mode

• Turn on: Hold the button you would like to assign the turbo functionality to, then press the Select button twice to enable the Turbo Mode, the Status LEDs will blink continuously.
• Turn off: Hold the button you would like to deactivate the turbo functionality on, then press the Select button to disable the Turbo Mode, the Status LEDs will stop blinking.
  

Fast Button Swap

• The D-pad, Joystick/L3, Home button, Select button, and Start button are not supported for the button swap.
• The Status LEDs will blink continuously when the swapped function button is pressed.
• The button swap settings will not be saved permanently and will revert to default settings after the game pad is powered off or disconnected.
• Turn on: Hold both buttons that you would like to swap, then press the Select button to enable button swap, the Status LEDs will blink continously.
• Turn off: Hold both buttons that you would like to revert to normal, then press the Select button to disable button swap, the Status LEDs will stop blinking.
  

 Battery

Status	⟶	Power LED
Low battery	⟶	Red LEO blinks
Battery charging	⟶	Red LEO remains solid
Fully charged	⟶	Red LEO turns off

• The controller will automatically shut down if it fails to connect within 1 minute of startup, or if there are no operations within 15 minutes after establishing a connection.
• The controller will not shut down during wired connection.

 Safety Warnings

• Please always use batteries, chargers, and accessories provided by the manufacturer.
• The manufacturer is not liable for any safety issues arising from the use of non-manufacturer-approved . accessories.
• Do not attempt to disassemble, modify, or repair the device yourself. Unauthorized actions may result in serious 1nJury.
• Avoid crushing, disassembling, puncturing, or attempting to modify the device or its battery, as these actions can be dangerous.
• Any unauthorized changes or modifications to the device will void the manufacturer’s warranty.

 Support

Please visit support.8bitdo.com for further information & additional support.

Documents / Resources

8BitDo 64 Bluetooth Controller [pdf] Instructions 64 Bluetooth Controller, 64, Bluetooth Controller, Controller

References

• User Manual