BlueTooth Mesh Controller

LED Troffers, LED Panels & LED Commercial Downlights

WARNING

Please consult a licensed electrician for installation. Turn off the power at circuit breaker before installing the unit.

FEATURES

• Please call a licensed electrician for installation.
• Drill 1/2″ KO in the sheet metal for ECPPFCBT1 installation, make sure the ECPPFCBT1 well fixed in the luminaire.
• Screw in the sensor into the receptacle and make sure the connection is tight. Ensure the rubber gasket touches the outside surface of the fixture.
• Attach the lens to sensor and turn the lens module clockwise to ensure it locks in place.
• Please refer below diagram for wiring.
• Return power back to source.
• Commissioned the sensor via Earth Connect App.

WIRING

1. AC INPUT 120-277V
2. BLACK (18AWG)
3. WHITE (18AWG)
4. RED (18AWG)
5. PINK 10V-(22AWG)
6. PURPLE10V+ 22AWG
7. DRIVER
8. LIGHTS

Download the EarthConnect App

Download the app instructions

App Instructions

LEARN MORE: EarthConnect
www.earthtronics.com/earthconnect

EarthTronics, Inc. | Norton Shores, MI 49441 | www.earthtronics.com | Email: contact@earthtronics.com
Toll Free: 866.632.7840

Rev. 12.4.23 | EC11799

Documents / Resources

	EarthConnect ECPPFCBT1 Bluetooth Mesh Controller [pdf] Instructions ECPPFCBT1, ECPPFCBT1 Bluetooth Mesh Controller, Bluetooth Mesh Controller, Mesh Controller, Controller
	EarthConnect ECPPFCBT1 BlueTooth Mesh Controller [pdf] Instructions ECPPFCBT1, ECPPFCBT1 BlueTooth Mesh Controller, BlueTooth Mesh Controller, Mesh Controller, Controller

References

• User Manual