8BitDo N30 Bluetooth Gamepad/Controller Instruction Manual

8BitDo logoN30 Bluetooth gamepad –
-instruction manual

8BitDo N30 Bluetooth Gamepad Controller

  • press start to turn on the controller
  • press & hold start for 3 seconds to turn off the controller
  • press & hold start for 8 seconds to force turn off the controller

Switch

  1. Press start to turn on the controller, and LEO will start to blink
  2. press and hold select for 3 seconds to enter pairing mode. LEO will rapidly blink
  3. go to your Switch Home Page to click on Controllers, then click on Change Grip/Order to pair with the adapter
  4. -LED will stay solid when the connection is successful
    • controller will auto-reconnect to your Switch with the press of start once it has been paired

Retro Receivers & USB Adapter

  1. Press start to turn on the controller, and LEO will start to blink
  2. press and hold select for 3 seconds to enter pairing mode. LEO will rapidly blink
  3.  Press the pair button on the receiver, and LEO will start to blink
  4. LED on both the controller and receiver will stay solid when the connection is successful
    • controller will auto-reconnect with the press of start once it has been paired

battery

status — LED indicator -­
low battery mode red LEO blinks
battery charging solid red LEO
  • built-in 480 mAh Li-on with 18 hours of playtime
  • rechargeable via USB cable with1-2 hour charging time

support

  • please visit support.8bitdo.com for further information & additional support

Documents / Resources

PDF thumbnailN30 Bluetooth Gamepad/Controller
Instruction Manual · N30 Bluetooth Gamepad Controller, N30, Bluetooth Gamepad Controller

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.