IC-MIB2 Camera Interface
“
Specifications:
- Product Name: Camera Integration System for AUDI vehicles with
MIB2 system - Manufacturer: IC-MIB2
- Address: 1080 Holland Drive, Boca Raton, FL 33487
- Contact: 929-220-1212
Product Usage Instructions:
Kit Components:
- IC-MIB2 Interface
- LCD IN Cable
Interface Ports:
- Main T-Harness
- LVDS OUT
- LVDS IN
- Main Power INPUT
- Dip Switches (refer to settings below)
Dip Switch Settings:
The dip switches affect resolution (screen size), CAN type
(vehicle type), and OE vs. aftermarket camera. Make the appropriate
settings based on the model/screen of your AUDI vehicle:
| Model/Screen | Switch 1 | Switch 2 | Switch 3 | Switch 4 |
|---|
Forced Video Input:
To force video input, hold the hang-up button on the steering
wheel. This will activate the ‘DVR VID’ input via RCA.
FAQ:
How many additional composite video inputs does the IC-MIB2
add?
The IC-MIB2 adds up to 3 additional composite video inputs to
the factory screen in AUDIs equipped with the MIB2 system.
How do I enable the front camera timer?
To enable the front camera timer, set dip switch 7 to the ON
position.
What do the dip switches control?
The dip switches control resolution (screen size), CAN type
(vehicle type), and OE vs. aftermarket camera settings.
How can I contact customer support?
You can reach customer support at support@zz-2.com or call
toll-free at 877-241-2526.
“`
Camera Integration System for AUDI vehicles equipped with the MIB2 system
1080 Holland Drive, Boca Raton, FL 33487 | 929-220-1212
The IC-MIB2 adds up to 3 additional composite video inputs to the factory screen in AUDIs equipped with the MIB2 system. Forced video input is available by holding the hang up button on the steering wheel.
KIT COMPONENTS
IC-MIB2 Interface
LCD IN Cable
INTERFACE PORTS
Main T-Harness
LVDS OUT
LVDS IN
Main Power INPUT
Dip Switches
NOT USED
DIP
ON
OFF
1
2
3
SEE SIDE CHART
4
5
Video IN
Video IN
Enable
Disable
6 LEAVE OFF LEAVE OFF
7 Front cam
Front cam
timer ON
timer OFF
8
OE RVC
AFTER RVC
DIP SWITCH SETTINGS
MODEL / SCREEN
1
2
3
4
A4, Q5 (7″ screen) after Sept 2018 OFF
OFF ON
OFF
A4, Q5 (7″ screen) before Sept 2018 ON
OFF ON
OFF
A4, A5, Q7 (8.3″ w/ black frame)
OFF
OFF OFF
OFF
A4, A5, Q7 (8.3″ w/ chrome frame) OFF
OFF OFF
ON
A3 (800×480)
OFF
ON
ON
OFF
A6, A7 (2016-2018)
ON
OFF OFF
OFF
A3 (400×240)
OFF
ON
ON
ON
A3, Q2 (7″ screen)
OFF
ON OFF
OFF
Q2 (8.3″ screen)
ON
ON OFF
ON
Porsche PCM4.0
OFF
OFF
ON
ON
2018 A5
OFF
ON OFF
ON
VW MIB2 (5.8″ screen)
ON
OFF ON
ON
VW MIB2 (8″ screen) VW MIB2 (6.5″ screen)
ON
ON
ON
OFF
ON
ON
ON
ON
1080 Holland Drive, Boca Raton, FL 33487 | 929-220-1212
2|Page
GRAY or
PINK
1080 Holland Drive, Boca Raton, FL 33487 | 929-220-1212
3|Page
Once installation is complete and all dip-switches are set properly and camera is powered and connected, reverse image should display automatically while in reverse (unless manual transmission in this case, power Orange trigger wire with reverse gear).
– DIP SWITCHES affect resolution (screen size), CAN type (vehicle type) and OE vs aftermarket camera. – Press and hold end call button (steering wheel) to force `DVR VID’ input RCA.
support@zz-2.com 929-220-1212
Toll free: 877-241-2526
1080 Holland Drive, Boca Raton, FL 33487 | 929-220-1212
4|Page
Documents / Resources
 | ZZ 2 IC-MIB2 Camera Interface [pdf] User Manual IC-MIB2, IC-MIB2 Camera Interface, IC-MIB2, Camera Interface, Interface |