TECH CONTROLLERS EU-262 Peripherals Amamojula Angeziwe

Imininingwane

• Incazelo: Idivayisi yokuxhumana engenantambo ye-EU-262 yezilawuli zamagumbi ezifunda ezimbili
• Amamojula: Ifaka imojuli ye-v1 kanye nemojuli ye-v2
• Ukuzwela kwe-Antenna: Imojula ye-v1 kufanele ifakwe okungenani ngamasentimitha angama-50 kude nezindawo zensimbi, amapayipi, noma amabhoyela e-CH ukuze kube nokuzwela okufanelekile kwe-antenna.
• Isiteshi Esizenzakalelayo Sokuxhumana: Isiteshi '35'
• Ukunikezwa kwamandla kagesi: I-V1 – 230V, V2 – 868 MHz

imibuzo ejwayelekile ukubuzwa

Q: Yini okufanele ngiyenze uma kwenzeka amaphutha phakathi nenqubo yokushintsha isiteshi?

A: Amaphutha enkambisweni yokushintsha isiteshi aboniswa isibani sokulawula esihlala cishe imizuzwana emi-2. Ezimweni ezinjalo, isiteshi asishintshwa. Ungaphinda izinyathelo zokushintsha isiteshi ukuze uqinisekise ukucushwa okuyimpumelelo.

UKUPHEPHA

Ngaphambi kokusebenzisa idivayisi okokuqala umsebenzisi kufanele afunde imithetho elandelayo ngokucophelela. Ukungayithobeli imithetho efakwe kuleli bhukwana kungaholela ekulimaleni komuntu siqu noma ekulimaleni kwesilawuli. Imanuwali yomsebenzisi kufanele igcinwe endaweni ephephile ukuze isetshenziswe futhi. Ukuze kugwenywe izingozi namaphutha kufanele kuqinisekiswe ukuthi wonke umuntu osebenzisa idivayisi uzijwayele isimiso sokusebenza kanye nemisebenzi yokuphepha yesilawuli. Uma ngabe idivayisi izothengiswa noma ibekwe endaweni ehlukile, qiniseka ukuthi imanuwali yomsebenzisi ikhona nedivayisi ukuze noma yimuphi umsebenzisi ongase akwazi ukufinyelela ulwazi olubalulekile mayelana nedivayisi.
Umkhiqizi akakwamukeli ukubophezeleka nganoma yikuphi ukulimala noma ukulimala okubangelwa ubudedengu; ngakho-ke, abasebenzisi banesibopho sokuthatha izinyathelo zokuphepha ezidingekayo ezisohlwini lwebhukwana ukuvikela izimpilo zabo kanye nempahla.

ISEXWAYISO

• Idivayisi kufanele ifakwe umuntu osebenza ngogesi oqeqeshiwe.
• I-regulator akufanele isetshenziswe izingane

ISEXWAYISO

• Idivayisi ingalimala uma ishaywa umbani. Qiniseka ukuthi ipulaki inqanyuliwe ekunikezeni amandla ngesikhathi kunesiphepho.
• Noma yikuphi ukusetshenziswa ngaphandle kokucaciswa ngumkhiqizi akuvunyelwe.

Izinguquko okuthengiswayo ezichazwe kumanuwali kungenzeka zethulwe ngemva kokuqedwa kwaso ngoNovemba 17 2017. Umkhiqizi unelungelo lokwethula izinguquko esakhiweni. Imifanekiso ingase ihlanganise imishini eyengeziwe. Ubuchwepheshe bokuphrinta bungase bubangele umehluko wemibala ebonisiwe.

Ukunakekela indawo ezungezile yikona okuza kuqala kithi. Ukwazi iqiniso lokuthi senza izinto zikagesi kusibophezela ukuthi silahle izinto ezisetshenzisiwe kanye nezinto zikagesi ngendlela ephephile kwimvelo. Ngenxa yalokho, inkampani ithole inombolo yokubhalisa enikezwe uMhloli Omkhulu Wokuvikelwa Kwemvelo. Uphawu lomgqomo kadoti ohlukanisiwe emkhiqizo lisho ukuthi umkhiqizo akufanele ulahlwe emigqonyeni yemfucuza evamile. Ngokuhlukanisa imfucuza ehloselwe ukugaywa kabusha, sisiza ukuvikela indawo yemvelo. Kuyisibopho somsebenzisi ukudlulisa udoti okokusebenza kukagesi kanye ne-elekthronikhi endaweni ekhethiwe yokuqoqwa ukuze kugaywe kabusha imfucuza ekhiqizwe ngezinto zikagesi nezikagesi.

IDEVICE DESCRIPTION

I-EU-262 iyisisetshenziswa esinezinjongo eziningi esivumela ukuxhumana okungenantambo kuzo zonke izinhlobo zezilawuli zamagumbi ezifunda ezimbili.

Isethi ihlanganisa amamojula amabili:

1. I-module ye-v1 - ixhunywe kusilawuli segumbi lezifunda ezimbili.
2. Imojula ye-v2 – idlulisa isiginali ethi 'VULIWE/KUVALIWE' isuka kumojula ye-v1 iye kusilawuli esikhulu noma kumshini wokushisisa.
   
   QAPHELA
   Ukuze kuzuzwe ukuzwela okuphezulu kakhulu kwe-antenna, imojula ye-EU-262 v1 kufanele ifakwe okungenani ama-50 cm ukusuka kunoma iyiphi indawo yensimbi, amapayipi noma ubhayela we-CH.
   

ISHINTSHA LESITESHI

QAPHELA
Ishaneli yokuxhumana ehleliwe ngu-'35'. Asikho isidingo sokushintsha ishaneli yokuxhumana uma ukusebenza kocingo kungaphazanyiswa yinoma iyiphi isignali yomsakazo.

Uma kwenzeka kuba nokuphazamiseka komsakazo, kungase kudingeke ukuthi kushintshwe ishaneli yokuxhumana. Ukuze ushintshe isiteshi, landela lezi zinyathelo:

1. Cindezela inkinobho yokushintsha isiteshi kumojuli ye-v2 bese uyibamba cishe imizuzwana emi-5 - ilambu elilawulayo eliphezulu lizoba luhlaza, okusho ukuthi imojula ye-v2 ingene kumodi yokushintsha isiteshi. Uma ukukhanya okuluhlaza kuvela, ungakhulula inkinobho yokushintsha isiteshi. Uma isiteshi singashintshiwe emizuzwini embalwa, imojuli izoqalisa kabusha imodi yokusebenza evamile.
2. Cindezela bese ubamba inkinobho yokushintsha isiteshi kumojuli ye-v1. Uma isibani sokulawula sibaneka kanye (ukubalasha okukodwa okusheshayo), usuqalile ukusetha idijithi yokuqala yenombolo yesiteshi sokuxhumana.
3. Bamba inkinobho bese ulinda kuze kube yilapho ukukhanya kokulawula kuphazima (kuqhubeke nokucisha) inani lezikhathi ezibonisa idijithi yokuqala yenombolo yesiteshi.
4. Dedela inkinobho. Lapho ukukhanya kokulawula kucima, cindezela inkinobho yokushintsha isiteshi futhi. Lapho isibani esilawulayo senzwa sibaneka kabili (izibani ezimbili ezisheshayo), usuqalile ukusetha idijithi yesibili.
5. Bamba inkinobho bese ulinda kuze kube yilapho isibani sokulawula sikhanyisa inombolo oyifunayo yezikhathi. Lapho inkinobho ikhishwa, isibani sokulawula sizokhanyisa kabili (ukubalasha okubili okusheshayo) kanye nokukhanya kokulawula okuluhlaza kumojuli ye-v1 kuzocisha. Kusho ukuthi ukuguqulwa kwesiteshi kuqedwe ngempumelelo.
   Amaphutha enkambisweni yokushintsha isiteshi aboniswa ngesibani sokulawula siqhubeka cishe imizuzwana emi-2. Esimeni esinjalo, isiteshi asishintshwa.
   QAPHELA
   Uma kusethwa inombolo yesiteshi enedijithi eyodwa (iziteshi 0-9), idijithi yokuqala kufanele ibe ngu-0.

v1 module

1. Isimo sesilawuli segumbi (lawula ukukhanya KUVULIWE - ukufudumeza). Iphinde ibonise ushintsho lwesiteshi sokuxhumana njengoba kuchazwe esigabeni III.
2. Isibani sokulawula ukunikezwa kwamandla
3. Inkinobho yokuxhumana

v2 module

1. Imodi yokuxhumana/yokushintsha isiteshi (kwimodi yokushintsha isiteshi ukukhanya KUVULIWE unomphela)
2. Isibani sokulawula ukunikezwa kwamandla
3. Isimo sesilawuli segumbi (ukulawula ukukhanya KUVULIWE - ukufudumeza)
4. I-Przycisk komunikacji

IDATHA YOBUCHWEPHESHE

Incazelo	V1	V2
Izinga lokushisa le-ambient	5u50 oC
Ukunikezwa kwamandla kagesi	230V
Imvamisa yokusebenza	868 MHz

Isimemezelo Se-EU Sokuhambisana

Ngalokhu, simemezela ngaphansi kwesibopho sethu sodwa ukuthi i-EU-262 ekhiqizwa yi-TECH STEROWNIKI II Sp. z oo, inhloko-dolobha yase-Wieprz Biała Droga 31, 34-122 Wieprz, ithobela i-Directive 2014/53/EU yephalamende laseYurophu kanye noMkhandlu wangomhla ziyi-16 kuMbasa wezi-2014 mayelana nokuvunyelaniswa kwemithetho Yamazwe Angamalungu ehlobene ukwenziwa kutholakale emakethe yezimpahla zomsakazo, i-Directive 2009/125/EC esungula uhlaka lokumiswa kwezidingo ze-ecodesign zemikhiqizo ehlobene namandla kanye nokulawulwa YINKONZO YEZOBUCHWEPHESHE NOBUCHWEPHESHE bomhla zingama-24 kuNhlangulana wezi-2019 ochibiyela umthethonqubo ophathelene izidingo ezibalulekile maqondana nokukhawulelwa kokusetshenziswa kwezinto ezithile eziyingozi ezintweni zikagesi neze-elekthronikhi, ukusebenzisa izinhlinzeko ze-Directive (EU) 2017/2102 yePhalamende laseYurophu kanye noMkhandlu wangomhla ziyi-15 kuNovemba 2017 ochibiyela i-Directive 2011/65/EU ngo- ukuvinjelwa kokusetshenziswa kwezinto ezithile eziyingozi ezintweni zikagesi neze-elekthronikhi (OJ L 305, 21.11.2017, p. 8).

Ukuze kuhlolwe ukuthobela imithetho, kwasetshenziswa izindinganiso ezivumelanisiwe:

• I-PN-EN IEC 60730-2-9 :2019-06 art. 3.1a Ukuphepha kokusetshenziswa
• I-PN-EN 62479:2011 art. 3.1 Ukuphepha kokusetshenziswa
• I-ETSI EN 301 489-1 V2.2.3 (2019-11) art.3.1b Ukuhambelana kwe-electromagnetic
• I-ETSI EN 301 489-3 V2.1.1:2019-03 art.3.1 b Ukuhambisana kwe-electromagnetic
• I-ETSI EN 300 220-2 V3.2.1 (2018-06) art.3.2 Ukusetshenziswa okuphumelelayo nokuhambisanayo kwe-radio spectrum
• I-ETSI EN 300 220-1 V3.1.1 (2017-02) art.3.2 Ukusetshenziswa okuphumelelayo nokuhambisanayo kwe-radio spectrum
• I-PN EN IEC 63000:2019-01 RoHS.

Wieprz, 17.11.2017

Indlunkulu emaphakathi:
ul. Biata Droga 31, 34-122 Wieprz

Isevisi:
ul. Skotnica 120, 32-652 Bulowice

ucingo: +48 33 875 93 80
i-imeyili: serwis@techsterrowniki.pl
www.tech-controllers.com

Amadokhumenti / Izinsiza

TECH CONTROLLERS EU-262 Peripherals Amamojula Angeziwe [pdf] Imaniwali yosebenzisayo Amamojula Engeziwe e-EU-262, EU-262, Amamojula Engeziwe, Amamojula Engeziwe, Amamojula

Izithenjwa

• Imaniwali yosebenzisayo