STMicroelectronics STM32F413VG High Performance Access Line
Imininingwane
- Manufacturer Item Number: STM32F413VGH6
- Manufacturer Item Name: 51MJ*463XXXA
- Inani: 80 mg
- Inguqulo: A
- Iyunithi Yesilinganiso: mg
- Indawo Yokukhiqiza: 9996
- Uhlobo Lweyunithi: Ngayinye
- MSL Rating: 3
- Umklami Wephakheji: BGA
- Classification Temperature: 260°C
- Inombolo Yemijikelezo Yokugeleza Kabusha: 3
- Usayizi Wephakheji: 7×7
- Package Description: A0C2 UFBGA 7x7x0.60 100L R12sq P0.5 8219030
Imiyalo yokusetshenziswa komkhiqizo
Ukuphatha kanye Nesitoreji
Handle the product with care to avoid any damage. Store in a
cool, dry place away from direct sunlight and moisture.
Ukufakwa
Follow the manufacturer’s guidelines for installing the product in your device. Ensure proper alignment and connection.
Imiyalelo yokusebenza
Refer to the device’s user manual for specific operating instructions related to this product. Ensure proper power supply and compatibility.
Incazelo
- The STM32F413xG/H devices are based on the high-performance Arm® I-Cortex®-M4 32-bit RISC core operating at a frequency of up to 100 MHz. Their Cortex®-M4 core features a floating-point unit (FPU) single precision, which supports all Arm single-precision data-processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU), which enhances application security.
- The STM32F413xG/H devices belong to the STM32F4 access product lines (with products combining power efficiency, performance, and integration) while adding a new innovative feature called Batch Acquisition Mode (BAM), allowing to save even more power consumption during data batching.
- The STM32F413xG/H devices incorporate high-speed embedded memories (up to 1.5 Mbytes of flash memory, 320 Kbytes of SRAM), and an extensive range of enhanced I/Os and peripherals connected to two APB buses, three AHB buses, and a 32-bit multi-AHB bus matrix.
- All devices offer a 12-bit ADC, two 12-bit DACs, a low-power RTC, twelve general-purpose 16-bit timers, including two PWM timers for motor control, two general-purpose 32-bit timers, and a low-power timer.
Umdwebo weSekethe
They also feature standard and advanced communication interfaces.
Izici
- Kufaka phakathi ubuchwepheshe be-ST besimanje obunelungelo lobunikazi
- Dynamic Efficiency Line with eBAM (enhanced Batch Acquisition Mode)
- 1.7 V kuya ku-3.6 V ugesi
- -40 °C to 85/105/125 °C temperature range
- Core: Arm® 32-bit Cortex®-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator™) allowing 0-wait state execution from flash memory, frequency up to 100 MHz, memory protection unit, 125 DMIPS/ 1.25 DMIPS/MHz (Dhrystone 2.1), and DSP instructions
- Izinkumbulo
- Up to 1.5 Mbytes of flash memory
- 320 Kbytes we-SRAM
- Flexible external static memory controller with up to 16-bit data bus: SRAM, PSRAM, NOR Flash memory
- Dual-mode Quad-SPI interface
- 512 bytes of OTP memory
- LCD parallel interface, 8080/6800 izindlela
- Clock, reset, and supply management
- 1.7 kuya ku-3.6 V ukunikezwa kwesicelo kanye nama-I/Os
- POR, PDR, PVD and BOR
- 4-to-26 MHz crystal oscillator
- I-RC esikwe efekthri engu-16 MHz yangaphakathi
- I-32 kHz oscillator ye-RTC enokulinganiswa
- I-32 kHz RC yangaphakathi enokulinganiswa
- Ukusetshenziswa kwamandla
- Run: 112 µA/MHz (peripheral off)
- Stop (Flash in Stop mode, fast wakeup time): 42 µA Typ.; 80 µA max @25 °C
- Stop (Flash in Deep power down mode, slow wakeup time): 15 µA Typ.; 46 µA max @25 °C
- Standby without RTC: 1.1 µA Typ.; 14.7 µA max at @85 °C
- VI-BAT supply for RTC: 1 µA @25 °C
- 2×12-bit D/A converters
- 1×12-bit, 2.4 MSPS ADC: up to 16 channels
- 6x digital filters for sigma delta modulator, 12x PDM interfaces, with stereo microphone and sound source localization support
- General-purpose DMA: 16-stream DMA
- Up to 18 timers: up to twelve 16-bit timers, two 32-bit timers up to 100 MHz each, with up to four IC/OC/PWM or pulse counter and quadrature (incremental) encoder input, two watchdog timers (independent and window), one SysTick timer, and a low-power timer
- Imodi yokususa iphutha
- I-serial wire debug (SWD) & JTAG
- I-Cortex®-M4 Embedded Trace Macrocell™
- Up to 114 I/O ports with interrupt capability
- Up to 109 fast I/Os up to 50 MHz
- Up to 114 five V-tolerant I/Os
- Up to 24 communication interfaces
- Up to 4x I2C interfaces (SMBus/PMBus)
- Up to 10 UARTS: 4 USARTs / 6 UARTs (2 x 12.5 Mbit/s, 2 x 6.25 Mbit/s), ISO 7816 interface, LIN, IrDA, modem control)
- Up to 5 SPI/I2Ss (up to 50 Mbit/s, SPI or I2S audio protocol), out of which 2 muxed full-duplex I2S interfaces
- SDIO interface (SD/MMC/eMMC)
- Advanced connectivity: USB 2.0 full-speed device/host/OTG controller with PHY
- 3x CAN (2.0B Active), 1xSAI
- Ijeneretha yenombolo engahleliwe yeqiniso
- Iyunithi yokubala ye-CRC, i-ID eyingqayizivele engu-96-bit
- RTC: subsecond accuracy, hardware calendar packages are ECOPACK®2
Imibuzo Evame Ukubuzwa
What is the package size of the product?
The package size is 7x7.
Does the product meet EU RoHS requirements?
Yes, the product meets EU RoHS requirements without any exemptions.
How many reflow cycles can the product undergo?
The product can undergo up to 3 reflow cycles.
Amadokhumenti / Izinsiza
 |
STMicroelectronics STM32F413VG High Performance Access Line [pdf] Umhlahlandlela Womsebenzisi STM32F413VG High Performance Access Line, STM32F413VG, High Performance Access Line, Access Line, Line |