I-SMART Module Multi-Function Environmental Sensor
Ulwazi Lomkhiqizo
SRSM.ENV_SENSOR.01
I-SRSM.ENV_SENSOR.01 iyimojula ye-NFC evumela ukuthi imisebenzi ehlobene ne-NFC isetshenziswe ngoxhumano lwe-USB CCID ngemva kokuxhunywa kumsingathi we-USB 2.0. Imojula inevolyumu engu-3.3Vtagi-e okukhiphayo, izikhonkwane zesignali ye-USB, izikhonkwane ezigodliwe, izikhonkwane zomhlabathi, izikhonkwane ze-I2C, nezikhonkwane ze-UART. Iphinde ibe nendawo yokuzwa yothi futhi ithobelana Nemithetho ye-FCC ingxenye 15 yemikhawulo yokuchayeka emisebeni ye-RF endaweni engalawuleki.
Imojula ingafakwa kuphela isihlanganisi se-OEM kuhlelo lokusebenza olungaguquki noma lweselula, futhi umkhiqizo wokugcina kufanele uthobelane nakho konke ukugunyazwa kwemishini ye-FCC esebenzayo, imithetho, izimfuneko, nezinye izingxenye zokusakaza ngaphakathi komkhiqizo womsingathi. I-OEM kufanele ifake zonke izitatimende ze-FCC kanye/noma ze-IC nezixwayiso ezinemininingwane kubhukwana kuya ekulebulani komkhiqizo wokugcina kanye nemanuwali yomkhiqizo oqediwe.
Incazelo yesixhumi
| Inombolo ye-PIN | Igama | Incazelo |
|---|---|---|
| 1 | 3V PHUMA | 3.3V ivolumutage okukhiphayo nge-module |
| 2 | I-USB DP | Isignali ye-USB |
| 3 | GND | Ground |
| 4 | I-USB DM | Isignali ye-USB |
| 5 | I-MCU INT | Igodliwe |
| 6 | I-I2C SDA | Igodliwe |
| 7 | I-I2C SCL | Igodliwe |
| 8 | GND | Ground |
| 9 | I-UART TX | Igodliwe |
| 10 | UART RX | Igodliwe |
| 11 | 5VM | Ukunikezwa kwamandla okungu-5V |
| 12 | 5VM | Ukunikezwa kwamandla okungu-5V |
Indawo yokuzwa
Indawo yokuzwa ye-antenna ikhonjisiwe emfanekisweni ongezansi:
Imiyalo yokusebenzisa
- Xhuma imojula ye-SRSM.ENV_SENSOR.01 kumsingathi we-USB 2.0.
- Sebenzisa imisebenzi ehlobene ne-NFC ngesixhumi esibonakalayo se-USB CCID.
Qaphela: Noma yiziphi izinguquko noma ukuguqulwa okungagunyazwanga ngokucacile inhlangano enesibopho sokuthobela imithetho kungasusa igunya lomsebenzisi lokusebenzisa okokusebenza. Imojula ikhawulelwe ekufakweni kwe-OEM KUPHELA.
I-ID ye-FCC: I-QCI-IDNMOD1
IC: 4302A-IDNMOD1
- Incazelo yesixhumi
Inombolo ye-PIN Igama Incazelo 1 3V PHUMA 3.3V ivolumutage okukhiphayo nge-module 2 I-USB DP Isignali ye-USB 3 GND Ground 4 I-USB DM Isignali ye-USB 5 I-MCU INT Igodliwe 6 I-I2C SDA Igodliwe 7 I-I2C SCL Igodliwe 8 GND Ground 9 I-UART TX Igodliwe 10 UART RX Igodliwe 11 5VM Ukunikezwa kwamandla okungu-5V 12 5VM Ukunikezwa kwamandla okungu-5V - Indawo ye-Antenna: Indawo yokuzwa ye-antenna ikhonjisiwe emfanekisweni ongezansi:
- Imiyalelo: Ngemva kokuthi umsingathi we-USB2.0 exhunywe kule mojula, imisebenzi ehlobene ne-NFC ingaqhutshwa ngesixhumi esibonakalayo se-USB CCID.
- Ilebula: Kuzoba khona isikrini sikasilika semodeli yemojuli ku-PCB yemojuli
Isexwayiso se-FCC
Noma yiziphi Izinguquko noma ukuguqulwa okungagunyazwanga ngokucacile yinhlangano enesibopho sokuthobela imithetho kungasusa igunya lomsebenzisi lokusebenzisa okokusebenza.
Qaphela: Lesi sisetshenziswa sihloliwe futhi satholwa ukuthi sithobela imikhawulo yedivayisi yedijithali Yekilasi B, ngokuvumelana nengxenye 15 Yemithetho ye-FCC. Le mikhawulo iklanyelwe ukuhlinzeka ngokuvikeleka okufanele ekuphazanyisweni okuyingozi ekufakweni kwendawo yokuhlala. Lo mshini ukhiqiza ukusetshenziswa futhi ungakhipha amandla efrikhwensi yomsakazo futhi, uma ungafakiwe futhi usetshenziswe ngokuhambisana nemiyalelo, ungabangela ukuphazamiseka okuyingozi ezokuxhumana ngomsakazo. Nokho, asikho isiqinisekiso sokuthi ukuphazamiseka ngeke kwenzeke ekufakweni okuthile. Uma lesi sisetshenziswa sidala ukuphazamiseka okuyingozi emsakazweni noma kumabonakude, okunganqunywa ngokucisha nokuvula okokusebenza, umsebenzisi uyakhuthazwa ukuthi azame ukulungisa ukuphazamiseka ngesinyathelo esisodwa noma ngaphezulu kwezilandelayo:
- Hlela kabusha noma hambisa uthi olwamukelayo.
- Khulisa ukuhlukana phakathi kwesisetshenziswa nomamukeli.
- Xhuma okokusebenza endaweni yokuphuma kuyisekethe ehlukile kuleyo lapho umamukeli axhumeke khona.
- Xhumana nomthengisi noma uchwepheshe werediyo/TV onesipiliyoni ukuze uthole usizo.
Le divayisi ithobela ingxenye 15 yeMithetho ye-FCC. Ukusebenza kungaphansi kwemibandela emibili elandelayo:
- Le divayisi ingase ingabangeli ukuphazamiseka okuyingozi,
- Lolu cingo kufanele lwamukele noma yikuphi ukuphazamiseka okutholiwe, okuhlanganisa ukuphazamiseka okungase kubangele ukusebenza okungafuneki.
Lokhu okokusebenza kuthobelana nemikhawulo yokuchayeka emisebeni ye-RF ebekwe endaweni engalawuleki. Lo mshini kufanele ufakwe futhi usebenze ngebanga elincane elingamasentimitha angama-20 phakathi kwerediyetha nomzimba wakho.
Ukugunyaza okuhlukile kuyadingeka kukho konke okunye ukulungiselelwa kokusebenza, okuhlanganisa ukucushwa okuphathekayo ngokuphathelene neNgxenye 2.1093 nokulungiselelwa okuhlukile kwezinti.
Isexwayiso: Imojula ikhawulelwe ekufakweni kwe-OEM KUPHELA Ukufakwa kothi kufanele kube ukufakwa okuchwepheshile, futhi akukuvumeli ukusetshenziswa kwanoma yiluphi uthi olunesixhumi; izinhlobo ezivunyelwe zothi kufanele zicaciswe. Imojula ayikwazi ukuthengiswa ngokudayisa emphakathini jikelele noma nge-oda leposi; kufanele ithengiselwe abathengisi abagunyaziwe noma abafakeli kuphela. Umkhiqizo wokugcina okuhlosiwe ukuwusebenzisa akuwona owabathengi kanye nomphakathi jikelele; kunalokho idivayisi ngokuvamile isetshenziselwa imboni/yokuthengisa. Ukufakwa kuzokwenziwa ochwepheshe abaqeqeshiwe abanelayisensi, kusebenzisa isofthiwe ekhethekile futhi kulungise ama-engeli angcono kakhulu nokuqondiswa, okunzima ukuthi abantu abavamile bakwenze. Imojula ikhawulelwe ekufakweni kuhlelo lokusebenza lweselula noma olungaguquki. Isihlanganisi se-OEM sinesibopho sokuqinisekisa ukuthi umsebenzisi wokugcina akanawo umyalo owenziwe ngesandla wokukhipha noma ukufaka imojula; Ukugunyazwa kwe-modular kuvumela ukufakwa emikhiqizweni ehlukene yokusetshenziswa kokugcina okwenziwa ngumkhiqizi wemishini yoqobo (i-OEM) enokuhlolwa okulinganiselwe noma okungenakho okwengeziwe noma ukugunyazwa kwesisetshenziswa somsebenzi wokudlulisa ohlinzekwa yi-IDNMOD1. Ngokuqondile:
- Akukho ukuhlolwa okwengeziwe kokuthobela umthumeli okudingekayo uma imojuli isebenza ngothi olusohlwini lwedokhumenti engezansi.
- Akukho ukuhlola okwengeziwe kokuthobela umthumeli okudingekile uma imojuli isebenza ngohlobo olufanayo olujwayelekile lwe-antenna (okungukuthi iluphu ehlukaniswe eduze nenkundla, amapeshi ahlukanisiwe ayisiyingi) njengalawo asohlwini Lo mhlahlandlela Womsebenzisi kanye nasekugcwaliseni kwe-FCC kwe-IDNMOD1. Izimpondo ezamukelekayo kufanele zibe nenzuzo yensimu elingana noma engaphansi kunothiyo olwalugunyazwe ngaphambilini ngaphansi kwe-ID ye-FCC efanayo, futhi kufanele kube okufanayo ngebhendi kanye nezici zebhendi.
Ngaphezu kwalokho, umkhiqizo wokugcina kufanele uthobelane nakho konke ukugunyazwa kwempahla ye-FCC esebenzayo, imithethonqubo, izimfuneko nemisebenzi yempahla engahlobene ne-IDNMOD1. Okwesiboneloample, ukuthobelana kufanele kuboniswe emithethweni yezinye izingxenye zesithumeli ngaphakathi komkhiqizo wokusingathwa, kuzimfuneko zamaradiyetha angahlosiwe (Ingxenye 15B), kanye nezimfuneko zokugunyazwa ezengeziwe zemisebenzi engathumeli.
I-OEM esebenzisa i-IDNMOD1 iyadingeka ukuthi ifake zonke izitatimende ze-FCC kanye/noma ze-IC nezixwayiso ezinemininingwane ezigabeni ezilandelayo ekulebulani komkhiqizo wokugcina (lapho kucacisiwe) kanye nakubhukwana lomkhiqizo oqediwe. I-OEM kufanele futhi ihambisane ngokuqinile ne-antenna nemihlahlandlela yokufaka kanye nemikhawulo ye-MPE eshiwo kulo mbhalo.
- Imanuwali yomkhiqizo oqediwe kufanele iqukathe isitatimende esilandelayo:
- Umkhiqizo womsingathi uzosebenzisa ilebula ebonakalayo ethi “iqukethe imojuli ye-trnasmitter
- I-ID ye-FCC: I-QCI-IDNMOD1″ noma “iqukethe i-FCC ID: QCI-IDNMOD1”
- IC: 4302A-IDNMOD1″ noma “iqukethe i-IC: 4302A-IDNMOD1”
ISEXWAYISO: I-Federal Communications Commission ixwayisa ngokuthi izinguquko noma ukuguqulwa kwemojuli yomsakazo ngaphakathi kwalolu cingo akugunyazwanga ngokucacile yi-SMART Technologies ULC. kungasusa igunya lomsebenzisi lokusebenzisa okokusebenza.
Esimeni lapho i-OEM ifuna imikhawulo yesigaba B (indawo yokuhlala) yomkhiqizo womsingathi, imanuwali yomkhiqizo oqediwe kufanele ibe nesitatimende esilandelayo:
Qaphela: Lesi sisetshenziswa sihloliwe futhi satholwa ukuthi sithobela imikhawulo yedivayisi yedijithali Yekilasi B, ngokuvumelana nengxenye 15 Yemithetho ye-FCC. Le mikhawulo iklanyelwe ukuhlinzeka ngokuvikeleka okufanele ekuphazanyisweni okuyingozi ekufakweni kwendawo yokuhlala. Lesi sixhobo sikhiqiza, sisebenzise futhi singakhipha amandla efrikhwensi yomsakazo futhi, uma singafakiwe futhi sisetshenziswa ngokuhambisana nemiyalelo, singadala ukuphazamiseka okuyingozi ezokuxhumana ngomsakazo. Nokho, asikho isiqinisekiso sokuthi ukuphazamiseka ngeke kwenzeke ekufakweni okuthile. Uma lesi sisetshenziswa sidala ukuphazamiseka okuyingozi emsakazweni noma kumabonakude, okunganqunywa ngokucisha nokuvula okokusebenza, umsebenzisi uyakhuthazwa ukuthi azame ukulungisa ukuphazamiseka ngesinyathelo esisodwa noma ngaphezulu kwezilandelayo:
- Hlela kabusha noma hambisa uthi olwamukelayo.
- Khulisa ukuhlukana phakathi kwesisetshenziswa nomamukeli.
- Xhuma okokusebenza endaweni yokuphuma kuyisekethe ehlukile kuleyo lapho umamukeli axhumeke khona.
- Xhumana nomthengisi noma uchwepheshe werediyo/TV onesipiliyoni ukuze uthole usizo.
Esimeni lapho i-OEM ifuna isigaba esincane sedivayisi yedijithali Yesigaba B somkhiqizo wabo oqediwe, isitatimende esilandelayo kufanele sifakwe kumanuwali yomkhiqizo oqediwe:
Qaphela: Lesi sisetshenziswa sihloliwe futhi satholwa ukuthi sithobela imikhawulo yedivayisi yedijithali Yekilasi B, ngokuvumelana nengxenye 15 Yemithetho ye-FCC. Le mikhawulo iklanyelwe ukuhlinzeka ngokuvikeleka okufanele ekuphazanyisweni okuyingozi lapho okokusebenza kusebenza endaweni yezohwebo. Lesi sixhobo sikhiqiza, sisebenzise, futhi singakhipha amandla efrikhwensi yomsakazo futhi, uma ingafakiwe futhi isetshenziswe ngokuhambisana nebhukwana lemiyalo, ingase ibangele ukuphazamiseka okuyingozi ezokuxhumana ngomsakazo. Ukusebenza kwalesi sisetshenziswa endaweni yokuhlala kungase kubangele ukuphazamiseka okuyingozi lapho umsebenzisi kuzodingeka ukuthi alungise ukuphazamiseka ngezindleko zakhe.
Isitatimende kufanele sifakwe ngaphandle komkhiqizo wokugcina we-OEM okhuluma ukuthi idivayisi ekhonjwe ngezinombolo ezishiwo ngenhla ze-FCC ne-Industrial Canada ID ziqukethwe ngaphakathi komkhiqizo.
I-OEM kufanele ifake izitatimende ezilandelayo ngaphandle komkhiqizo oqediwe ngaphandle uma umkhiqizo umncane kakhulu (isb. ngaphansi kuka-4 x 4 amayintshi):
Le divayisi ithobela Ingxenye 15 Yemithetho ye-FCC. Ukusebenza kungaphansi kwezimo ezimbili ezilandelayo: (1) lolu cingo angeke lubangele ukuphazamiseka okuyingozi, futhi (2) lolu cingo kufanele lwamukele noma yikuphi ukuphazamiseka okutholiwe, okuhlanganisa noma yikuphi ukuphazamiseka okungase kubangele ukusebenza okungafuneki.
Ibhukwana lomsebenzisi lomkhiqizo wokugcina kufanele lifake imininingwane elandelayo endaweni evelele:
Ukuze uhambisane nezidingo zokuchayeka emisebeni ye-FCC ye-FCC, izimpondo ezisetshenziselwa lesi sidlulisi kufanele zifakwe ngendlela yokuthi ibanga elincane lokuhlukanisa elingama-20cm ligcinwe phakathi kwerediyetha (i-antenna) nomzimba wabantu abasebenzisayo/abaseduze ngaso sonke isikhathi futhi akufanele ebekwe ngokuhlanganyela noma esebenza ngokuhlangana nanoma yiluphi olunye uthi noma isidlulisi
I-IDNMOD1 iyahambisana nezinhlobo eziningi zezimpondo, kodwa ngezinjongo zokuthola isitifiketi se-modular ne-FCC, lunye kuphela uthi oluhloliwe. Abasebenzisi be-IDNMOD1 bangaba ne-antenna yabo kanye nezinhlelo ze-IDNMOD1 ezigunyazwe nge-FCC ne-IC.
Ukuze usebenzise i-IDNMOD1 ngaphansi kwe-FCC ID: QCI-IDNMOD1, i-OEM kufanele ilandele ngokuqinile le mihlahlandlela yezinti:
- I-OEM ingasebenza kuphela ngothi olulandelayo noma izimpondo zohlobo olufanayo ngenzuzo enkulu njengoba kukhonjisiwe:
I-PCB antenna enenzuzo yensimu ekude engu-0 dBi - Isixhumi esibonakalayo se-RF I/O kusixhumi se-antenna ku-PCB sizofezwa nge-microstrip noma ulayini wokudlulisa we-stripline onesici esivimbelayo esingu-50 ohms +/- 10%. I-coaxial pigtail yangokwezifiso ingase isetshenziselwe ukuxhuma ku-antenna esikhundleni sesixhumi.
- Isixhumi esiku-OEM's PCB esihlangana ne-antenna kufanele sibe sohlobo oluhlukile ukuze sikhubaze ukuxhumana nothi olungavunyelwe ngokuthobela isigaba 15.203 se-FCC. Izixhumi ezilandelayo zivunyelwe:
- I-OEM kufanele ifake i-IDNMOD1 ngokomsebenzi endaweni yayo yokugcina ukuze iqinisekise ukuthi izimo ziyahlangatshezwa.
Ibanga eliphansi eliphephile labantu abavela ku-IDNMOD1 linqunywe ukubala okuvamile ukuba libe ngaphansi kuka-20 cm ezinhlotsheni ze-antenna ezivumelekile. Umhlahlandlela Womsebenzisi womkhiqizo wokugcina kufanele ubandakanye isitatimende esilandelayo endaweni evelele:
Ukuze uhambisane nezidingo zokuchayeka emisebeni ye-FCC ye-FCC, izimpondo ezisetshenziselwa lesi sithumeli kufanele zifakwe ngendlela yokuthi ibanga elincane lokuhlukanisa elingama-20 cm ligcinwe phakathi kwerediyetha (i-antenna) nomzimba wabantu abasebenzisayo/abaseduze ngaso sonke isikhathi futhi akufanele. ibekwe ndawonye noma isebenze ngokuhlangana nanoma yiluphi olunye uthi noma isidlulisi.
Isexwayiso se-IC:
Le divayisi ithobelana nezinga le-RSS elikhishwe yi-Industrial Canada.
Ukusebenza kungaphansi kwemibandela emibili elandelayo:
- Le divayisi ingase ingabangeli ukuphazamiseka,
- Lolu cingo kufanele lwamukele noma yikuphi ukuphazamiseka, okuhlanganisa ukuphazamiseka okungase kubangele ukusebenza okungafunwa kocingo.
Amadokhumenti / Izinsiza
 |
I-SMART Module Multi-Function Environmental Sensor [pdf] Imaniwali yosebenzisayo I-QCI-IDNMOD1, QCIIDNMOD1, Inzwa Yendawo Eningi Esebenzayo Yemojuli, Inzwa Yemvelo Esebenza Kaningi, Inzwa Yemvelo, Inzwa |
