I-TWR-K40D100M I-MCU Yamandla Aphansi ene
I-USB nengxenye ye-LCD
Umhlahlandlela Womsebenzisi

I-Low-Power MCU ene-USB ne-Segment LCD
Tower System
Ipulatifomu Yebhodi Lokuthuthukiswa

Yazi Ibhodi le-TWR-K40D100M

I-TWR-K40D100M Freescale Tower System
Ipulatifomu Yebhodi Lokuthuthukiswa
Ibhodi le-TWR-K40D100M liyingxenye ye-Freescale Tower System, iplathifomu yebhodi yokuthuthukisa evumela ukwenziwa kwe-prototyping ngokushesha nokusebenzisa kabusha ithuluzi ngokusebenzisa ihadiwe elungiseka kabusha. I-TWR-K40D100M ingasetshenziswa ngokukhethwa okubanzi kwamabhodi okujikeleza we-Tower System.

Izingxenye ze-TWR-K40D100M

• I-MK40DX256VMD10 MCU (100 MHz ARM® Cortex® -M4 core, 512 KB flash, SLCD, USB FS OTG, 144 MAPBGA)
• Umthombo ovulekile ohlanganisiwe JTAG (OSJTAG) isifunda
• I-MMA8451Q 3-axis accelerometer
• Ama-LED amane alawulwa ngabasebenzisi
• Amaphedi okuthinta amane ane-capacitive kanye nezinkinobho zokusunduza ezimbili ezisebenza ngomshini
• Isokhethi ye-TWRPI yenhloso evamile (imojula ye-plug-in yombhoshongo)
• I-Potentiometer, isokhethi lekhadi le-SD kanye nesibambi sebhethri lamaseli

Igxathu emvakwe gxathu
Imiyalelo yokufaka
Kulo mhlahlandlela Wokuqala Okusheshayo, uzofunda ukuthi ungasetha kanjani imojula ye-TWR-K40D100M futhi uqalise ukuboniswa okuzenzakalelayo.

1. Faka Isofthiwe Namathuluzi
   Faka i-P&E Micro
   Ikhithi yamathuluzi ye-Kinetis Tower. Ikhithi yamathuluzi ihlanganisa i-OSJTAG kanye namashayeli e-USB-to-serial.
   Lezi zingatholakala ku-inthanethi ku- freescale.com/TWR-K40D100M.
   
2. Lungiselela Hardware
   Faka ibhethri elifakiwe kusibambi sebhethri le-VBAT (RTC). Bese, xhuma ingxenye efakiwe ye-LDC TWRPI-SLCD kusokhethi ye-TWRPI. Ekugcineni, xhuma ingxenye eyodwa yekhebula le-USB ku-PC bese enye ekugcineni kumandla/OSJTAG isixhumi esincane-B kumojuli ye-TWR-K40D100M. Vumela i-PC ukuthi ilungiselele ngokuzenzakalelayo izishayeli ze-USB uma kudingeka.
3. Tshekisa Ibhodi
   Tshekisa ibhodi ohlangothini ukuze ubone ama-LED aku-D8, D9, D10 kanye ne-D11 akhanya njengoba etshekile.
4. Zulazula esigabeni se-LDC
   Ingxenye ye-LDC izobonisa amasekhondi adlulile kusukela ekuqaliseni. Cindezela u-SW2 ukuze uguqule phakathi viewing the imizuzwana, amahora nemizuzu, potentiometer nezinga lokushisa.
5. Hlola Ngokuqhubekayo
   Hlola zonke izici namandla edemo ehlelwe ngaphambilini ngokwenza kabushaviewfaka idokhumenti yaselebhu etholakala freescale.com/TWR-K40D100M.
6. Funda kabanzi Nge-Kinetis K40 MCUs
   Thola i-MQX™ RTOS eyengeziwe namalebhu angenalutho nesofthiwe ye-Kinetis 40 MCUs freescale.com/TWR-K40D100M.

Izinketho ze-TWR-K40D100M Jumper

Okulandelayo uhlu lwazo zonke izinketho ze-jumper. Izilungiselelo ze-jumper ezifakiwe ezizenzakalelayo ziboniswa emabhokisini anomthunzi.

I-Jumper	Inketho	Ukusetha	Incazelo
J10	I-V_BRD Voltage Ukukhetha	1-2	Ukunikezwa kwamandla okungaphakathi kusethelwe ku-3.3 V
		2-3	Ukunikezwa kwamandla okungaphakathi kusethelwe ku-1.8 V (Eminye imingcele engaphakathi kungenzeka ingasebenzi)
J13	I-MCU Power Connection	ON	Xhuma i-MCU kumandla kagesi angaphakathi (V_BRD)
		VALIWE	Hlukanisa i-MCU emandleni (Xhuma ku-ammeter ukuze ulinganise okwamanje)
J9	Ukukhetha Amandla e-VBAT	1-2	Xhuma i-VBAT ekunikezeni amandla angaphakathi
		2-3	Xhuma i-VBAT kuvolumu ephezulutage phakathi kokunikezwa kwamandla okugibele noma ukunikezwa kwamaseli ohlamvu lwemali

I-Jumper	Inketho	Ukusetha	Incazelo
J14	OSJTAG Ukukhetha i-Bootloader	ON	OSJTAG Imodi ye-bootloader (OSJTAG ukuhlelwa kabusha kwe-firmware)
		VALIWE	Imodi yokususa iphutha
J15	JTAG Uxhumano Lwebhodi Yamandla	ON	Xhuma ukunikezwa kwe-5 V ku-JTAG port (isekela amandla ebhodi kusuka ku-JTAG i-pod esekela ukuphuma kokunikezwayo okungu-5 V)
		VALIWE	Nqamula ukunikezwa kwe-5 V okusuka ku-JTAG itheku
J12	I-IR Transmitter Connection	ON	Xhuma i-PTD7/CMT_IRO kusidluliseli se-IR (D5)
		VALIWE	Nqamula i-PTD7/CMT_IRO kumthumeli we-IR (D5)
J11	Isamukeli se-IR Ukuxhumana	ON	Xhuma i-PTC6/CMPO _INO kumamukeli we-IR (Q2)
		VALIWE	Nqamula i-PTC6/CMPO _INO kumamukeli we-IR (02)
J2	I-VREGIN Power Connection	ON	Xhuma i-USBO_VBUS kusuka ku-elevator kuya ku-VREGIN
		VALIWE	Nqamula i-USBO_VBUS kusuka ku-elevator kuya ku-VREGIN
J3	GPIO ukuze Drive RSTOUT	1-2	I-PTE27 ukushayela i-RSTOUT
		2-3	I-PTB9 ukushayela i-RSTOUT
J1	I-FlexBus Address Latch Selection	1-2	I-latch yekheli le-FlexBus ivaliwe
		2-3	I-latch yekheli le-FlexBus ivuliwe

Vakashela freescale.com/TWR-K40D100M, freescale.com/K40 noma freescale.com/Kinetis ukuze uthole ulwazi ngemojula ye-TWR-K40D100M, okuhlanganisa:

• Incwadi yomsebenzisi ye-TWR-K40D100M
• Imifanekiso ye-TWR-K40D100M
• Iphepha leqiniso le-Tower System

Ukusekela
Vakashela freescale.com/support ukuze uthole uhlu lwezinombolo zocingo endaweni yangakini.
Iwaranti
Vakashela freescale.com/warranty ngolwazi oluphelele lwewaranti.

Ukuze uthole ulwazi olwengeziwe, vakashela freescale.com/Tower
Joyina umphakathi waku-inthanethi we-Tower ku- towergeeks.org
I-Freescale, ilogo ye-Freescale, ilogo ye-Energy Efficient Solutions kanye ne-Kinetis yizimpawu zokuthengisa ze-Freescale Semiconductor, Inc., Reg. US Pat. & Tm. Valiwe. I-Tower wuphawu lokuthengisa lwe-Freescale Semiconductor, Inc. Wonke amanye amagama omkhiqizo noma wesevisi ayimpahla yabanikazi abafanele. I-ARM ne-Cortex yizimpawu zokuthengisa ezibhalisiwe ze-ARM Limited (noma izinkampani ezingaphansi kwayo) e-EU kanye/noma kwenye indawo. Wonke Amalungelo Agodliwe.
© 2013, 2014 Freescale Semiconductor, Inc. Inombolo Yedokhumenti: K40D100MQSG REV 2 Inombolo ye-Agile: 926-78685 REV C

Kulandwe kusuka Umcibisholo.com.

Amadokhumenti / Izinsiza

I-NXP TWR-K40D100M I-MCU Yamandla Aphansi ene-USB kanye Nengxenye ye-LCD [pdf] Umhlahlandlela Womsebenzisi I-TWR-K40D100M Low Power MCU ene-USB neSegment LCD, TWR-K40D100M, TWR-K40D100M MCU ene-USB neSegment LCD, i-Low Power MCU ene-USB neSegment LCD, i-MCU ene-USB kanye neSegment LCD, MCU, USB, Segment LCD

Izithenjwa

• Imaniwali yosebenzisayo