ISHO KAHLE PWM-120 Series 120W Constant Voltage I-PWM Output LED Driver User Manual

ISHO KAHLE PWM-120 Series 120W Constant Voltage I-PWM Output LED Driver User Manual

Izici

I-vol evamiletage PWM isitayela okukhiphayo.

Isicelo sokukhanyisa izimo eziphuthumayo siyatholakala ngokuya nge-IEC61347-2-13.
Umsebenzi owakhelwe ngaphakathi we-PFC nomklamo wekilasi we-Il

Akukho ukusetshenziswa kwamandla okulayisha <0.5W/ ukusetshenziswa kwamandla okulindile <0.5W(DA/DA2-uhlobo)
Ihlanganiswe ngokugcwele nezinga le-IP67

Izinketho zomsebenzi: 3 ku-1 dimming (dim-to-off); I-DALI/DALI-2
Ileveli encane yokufiphala engu-0.2% yohlobo lwe-DALI

Isikhathi sokuphila esijwayelekile> amahora angu-50000 kanye newaranti yeminyaka emi-5

Izinhlelo zokusebenza

Ukukhanyisa kwe-strip ye-LED
Ukukhanyisa kwe-LED kwangaphakathi

Ukukhanyisa kwe-LED kokuhlobisa
Ukukhanyisa kwezakhiwo ze-LED

Izibani zezimboni
Thayipha u-“HL” ozosetshenziswa ekilasini |, u-division 2 indawo eyingozi (ehlukanisiwe).

IKHODI YE-GTIN

Ukusesha kwe-MW: https://www.meanwell.com/serviceGTIN.aspx

Okuqukethwe fihla

1 Incazelo

2 INKCAZO

3 UMSEBENZI WOKUNQAMULA

4 OUTPUT LOAD vs TEMPERATURE

5 Amadokhumenti / Izinsiza

5.1 Izithenjwa

6 Okuthunyelwe Okuhlobene

Incazelo

Uchungechunge lwe-PWM-120 ingumshayeli we-120W AC/DC LED ofaka ivolthi engaguquki.tagImodi ye-e enokukhishwa kwesitayela se-PWM,
ekwazi ukugcina izinga lokushisa lombala kanye ne-homogeneity yokukhanya lapho ushayela zonke izinhlobo zamapheshana e-LED. I-PWM-120 isebenza kusukela ku-90~305VAC futhi inikeza amamodeli anevolumu ehlukile elinganiselwetagesukela phakathi kuka-12V kanye no-48V. Ngenxa yokusebenza kahle okuphezulu okungafika ku-90.5%, ngomklamo ongena fan, lonke uchungechunge luyakwazi ukusebenza ku--40°C ~ +90°C izinga lokushisa lekesi ngaphansi kwe-convection yomoya yamahhala. Lonke uchungechunge lulinganiselwe ngezinga lokuvikela lokungena le-IP67 futhi lifanele ukusebenzela okomile, damp noma izindawo ezimanzi. I-PWM-120 ifakwe umsebenzi wokufiphalisa oshintshayo umjikelezo wemisebenzi wokukhiphayo, ohlinzeka ngokuguquguquka okukhulu kwezinhlelo zokusebenza zemigqa ye-LED.

Ukumiswa kwekhodi kwemodeli

Uhlobo	Izinga le-IP	Umsebenzi	Qaphela
Akunalutho	IP67	3 kokungu-1 kokufiphala komsebenzi (0~10Vdc, isignali ye-PWM engu-10V nokumelana)	Kukhona kusitoki
DA	IP67	Ubuchwepheshe bokulawula be-DALI.(kohlobo lwe-12V/24V DA kuphela)	Kukhona kusitoki
I-DA2	IP67	Ubuchwepheshe bokulawula be-DALI-2.(ye-12V/24V enohlobo lwe-DA2 kuphela)	Kukhona kusitoki

INKCAZO

INDLELA		I-PWM-120-12	I-PWM-120-24	I-PWM-120-36	I-PWM-120-48
OKUPHUMAYO	DC VOLTAGE	12V	24V	36V	48V
	ILINGANISWE NJENGAMANJE	10A	5A	3.4A	2.5A
	AMANDLA AKALIWE	120W	120W	122.4W	120W
	IBANGA LOKUPHIMA	0 ~ 100%
	IZIMPENDULO ZE-PWM (Uhlobo.)	1.47kHz Yokungenalutho/DA-Type, 2.5kHz ku-DA2-Type
	UKUMISELA, VUKA ISIKHATHI Inothi. 2Inothi. 9	500ms, 80ms/230VAC noma 115VAC
	ISIKHATHI SOKUMUSA (Uhlobo.)	16ms / 230VAC noma 115VAC
INPUT	I-VOLTAGE RANGE Qaphela.3	90 ~ 305VAC 127 ~ 431VDC(Sicela ubhekisele esigabeni esithi “STATIC CHARACTERISTIC”)
	IFREQUENCY RANGE	I-47 ~ 63Hz
	AMANDLA FUTHI (Uhlobo.)	PF>0.97/115VAC, PF>0.96/230VAC, PF>0.93/277VAC @ ukulayisha okugcwele(Sicela ubhekisele esigabeni esithi “POWER FACTOR (PF) CHARACTERISTIC”)
	I-HARMONIC EYONKE UKUPHAZAMISEKA	I-THD< 20%(@load≧60%/115VAC, 230VAC; @load≧75%/277VAC)(Sicela ubhekisele esigabeni esithi “TOTAL HARMONIC DISTORTION”)
	UKUSEBENZA (Uhlobo.)	88.5%	90%	90%	90.5%
	I-AC CURRENT (Uhlobo.)	1.3A / 115VAC 0.65A / 230VAC 0.55A / 277VAC
	INRUSH CURRENT (Uhlobo.)	I-COLD START 60A(twidth=520μs ilinganiswa ku-50% Ipeak) ku-230VAC; Ngokwe-NEMA 410
	MAX. CHA. yama-PSU ku-16A CIRCUIT BREAKER	amayunithi ayi-4 (i-circuit breaker yohlobo B) / amayunithi angama-6 (i-circuit breaker yohlobo C) ku-230VAC
	UKUVUZA NJENGAMANJE	<0.25mA / 277VAC
	AKUKHO UKUSETSHENZISWA KWAMANDLA OMTHETHO/OKULINDILE	Akukho ukusetshenziswa kwamandla okulayisha<0.5w kuhlobo olungenalutho; ukusetshenziswa kwamandla okulindile<0.5W kuhlobo lwe-DA/DA2-uhlobo
UKUVIKELA	LAYISHA	108 ~ 130% amandla okukhiphayo alinganiselwe
		Imodi ye-Hiccup, ilulama ngokuzenzakalelayo ngemva kokususwa kwesimo sephutha
	WESIFUNDA ESIFISHANE	Imodi ye-hiccup engu-12V/24V kanye nemodi yokuvala engu-36V/48V (okuhlanganisa uhlobo lwe-DA/ngaphandle kohlobo lwe-DA2) Imodi ye-Hiccup, ilulama ngokuzenzakalelayo ngemva kokususwa kwesimo sephutha (ngohlobo lwe-DA2 kuphela)
	NGAPHEZU KWE-VOLTAGE	15 ~ 17V	28 ~ 34V	41 ~ 46V	54 ~ 60V
		Vala i-o/p voltage, vula amandla kabusha ukuze ululame
	NGENXA KWETEMPERATURE	Vala i-o/p voltage, vula amandla kabusha ukuze ululame
EZIMO	I-TEMP YOKUSEBENZA.	Tcase=-40 ~ +90℃ (Sicela ubhekisele esigabeni esithi “ OUTPUT LOAD vs TEMPERATURE”)
	MAX. CASE TEMP.	Isikhwama = + 90 ℃
	UKUSEBENZA UKUTHOBEKA	Ama-20 ~ 95% RH angavumeli
	ISITOREJI I-TEMP., UKUTHUMEKA	-40 ~ + 80 ℃, 10 ~ 95% RH
	ISIKHATHI. OKUQINISEKILE	±0.03%/℃ (0 ~ 45℃, ngaphandle kuka-0 ~ 40℃ ngo-12V)
	UKUDLIZELA	10 ~ 500Hz, 5G 12min./1cycle, isikhathi se-72min. ngayinye ihambisana nezimbazo ezingu-X, Y, Z
UKUPHEPHA & I-EMC	AMAZINGA OKUPHEPHA Inothi. 5	UL8750( uhlobo ”HL” )(ngaphandle kohlobo lwe-12DA), CSA C22.2 No. 250.13-12; I-ENEC BS EN/EN61347-1, BS EN/EN61347-2-13, BS EN/EN62384 ezimele, IP67,BIS IS15885( ye-PWM-120-12,24 kuphela), EAC TP TC 004,GB19510.1 GB 19510.14 uvunyiwe; Idizayini ibhekisela ku-BS EN/EN60335-1; Ngokuvumelana ne-BS EN/EN61347-2-13 isithasiselo J esilungele ukufakwa kwezimo eziphuthumayo(EL)(AC Input: 100-240Vac)(ku-DA2-Type kuphela)
	AMAZINGA E-DALI	I-IEC62386-101, 102, 207,251 ye-DA/DA2-Type kuphela, uhlobo lwedivayisi 6(DT6)
	INGABE I-VOLTAGE	I/PO/P:3.75KVAC; I/P-DA:1.5KVAC; I-O/P-DA:1.5KVAC
	UKUMELANA UKUZIHLUPHA	I/PO/P:100M Ohms / 500VDC / 25℃/ 70% RH
	EMC UKUVUSELELWA Inothi. 6	Ukuthobela i-BS EN / EN55015, i-BS EN / EN61000-3-2 Class C (@ umthwalo ≧ 60%); I-BS EN / EN61000-3-3, i-GB17743 ne-GB17625.1, i-EAC TP TC 020
	UKUVIKELWA EMC	Ukuhambisana ne-BS EN/EN61000-4-2,3,4,5,6,8,11; I-BS EN/EN61547, izinga lemboni yokukhanya (surge immunity Line-Line 2KV), EAC TP TC 020
ABANYE	MTBF	2243.7K amahora iminithi. I-Telcordia SR-332 (Bellcore); 228.7K amahora iminithi. I-MIL-HDBK-217F (25℃)
	DIMENSION	1916337.5mm (LWH)
	UKUPAKA	0.97Kg; 15pcs / 15.6Kg / 0.87CUFT
QAPHELA	Wonke amapharamitha OKUNGEKHO okushiwo ngokukhethekile akalwa kokokufaka okungu-230VAC, kukalwe okwamanje kanye no-25℃ wezinga lokushisa elizungezile. Ukwehliswa kwesilinganiso kungase kudingeke ngaphansi kwevolumu ephansi yokufakatages. Sicela ubheke izigaba ze-STATIC CHARACTERISTIC ukuze uthole imininingwane. Ubude besikhathi sokusetha bulinganiswa ekuqaleni okubandayo. UKUVULA/UKUVALA umshayeli kungaholela ekwandeni kwesikhathi sokusetha. Umshayeli uthathwa njengengxenye ezosetshenziswa ngokuhambisana nemishini yokugcina. Njengoba ukusebenza kwe-EMC kuzothintwa ukufakwa okuphelele, abakhiqizi bemishini yokugcina kufanele baphinde bafanelekele i-EMC Directive ekufakweni okuphelele futhi. Lolu chungechunge luhlangabezana nesikhathi sokuphila esijwayelekile samahora angama-50,000 wokusebenza lapho iTcase, ikakhulukazi iphuzu lephuzu (noma i-TMP, nge-DLC ngayinye), cishe ingama-75 ℃ noma ngaphansi. Sicela ubheke isitatimende sewaranti ku-MEAN WELL's webindawo ku http://www.meanwell.com Izinga lokushisa elizungezile elingu-3.5℃/1000m elinamamodeli angena fan kanye elingu-5℃/1000m elinamamodeli amafeni wokuphakama kokusebenza okuphezulu kuno-2000m(6500ft). Nganoma iyiphi inothi yohlelo lokusebenza kanye nesexwayiso sokufakwa kokusebenza kobufakazi bamanzi e-IP, sicela ubheke imanuwali yethu yomsebenzisi ngaphambi kokuyisebenzisa. https://www.meanwell.com/Upload/PDF/LED_EN.pdf9. Ngokusekelwe kumandla we-IEC 62386-101/102 DALI kumithetho yesikhathi nokuphazamiseka, isikhathi sokusetha sidinga ukuhlolwa ngesilawuli se-DALI esingasekela amandla e-DALI emsebenzini, ngaphandle kwalokho isikhathi sokusetha sizoba ngaphezu kwesekhondi elingu-0.5 Uhlobo lwe-DA. ※ Umshwana Wokuzihlangula Womkhiqizo: Ukuze uthole imininingwane enemininingwane, sicela ubheke ku-https://www.meanwell.com/serviceDisclaimer.aspx

UMSEBENZI WOKUNQAMULA

I-DIM+ yohlobo olungenalutho lwe-DA+ yohlobo lwe-DA/DA2 * *DIM- yohlobo olungenalutho lwe-DA- yohlobo lwe-DA/DA2

Isimiso sokufiphalaza sokukhishwa kwesitayela se-PWM

Ukufiphaza kutholakala ngokuhlukahluka komjikelezo womsebenzi wamanje wokukhipha.

3 kokungu-1 kokufiphalisa umsebenzi (Ngohlobo Olungenalutho)

Sebenzisa enye yezindlela ezintathu phakathi kwe-DIM+ ne-DIM-: 0 ~ 10VDC, noma isignali ye-PWM engu-10V noma ukumelana.

Umthombo ofiphalayo wamanje kusuka kumandla kagesi: 100μA (uhlobo.)

Qaphela

Okuncane. umjikelezo womsebenzi wokukhiphayo wamanje cishe u-0.15%, futhi okokufaka kokufiphalisa cishe ku-6KΩ noma 0.6VDC, noma isignali engu-10V PWM enomjikelezo womsebenzi ongu-6%.
Umjikelezo womsebenzi wokukhiphayo wamanje ungase wehle ufike ku-0% lapho okokufaka kokufiphalisa kungaphansi kuka-6KΩ noma ngaphansi kuka-0.6VDC, noma isignali engu-10V PWM enomjikelezo wemisebenzi ongaphansi kuka-6%.

I-DALI Interface (uhlangothi oluyinhloko; lwe-DA/DA2-Type)

Faka isignali ye-DALI phakathi kwe-DA+ ne-DA-.
Iphrothokholi ye-DALI inamaqembu ayi-16 namakheli angama-64.
Isinyathelo sokuqala simi ku-0.2% womkhiqizo

OUTPUT LOAD vs TEMPERATURE

IZIMPAWU ZESITATIKI

ISIQINISEKISO SAMANDLA (PF) CHARACTERISTIC

Ukukhishwa kwesilinganiso kuyadingeka ngaphansi kwevolumu ephansi yokufakatage.

UKUQHUBEKA KOKUQHUBEKA KWEHARONI (THD)

UKUSEBENZA vs LOAD

Uchungechunge lwe-PWM-120 lunokusebenza okuseqophelweni eliphezulu okungafinyelelwa ku-90.5% ezinhlelweni zokusebenza zasenkambu.

Imodeli engu-48V, i-Tcase ku-80 ℃

ISIKHATHI SOKUPHILA

Umdwebo weBlock

Ukucaciswa Kwemishini

Uhlobo Olungenalutho

I-DA/DA2-Type

Ncoma ukukhonjwa indlela

Imanuwali yokufaka

Ukuxhumana kohlobo olungenalutho

Izixwayiso

Ngaphambi kokuqala noma yimuphi umsebenzi wokufaka noma wokulungisa, sicela unqamule ukunikezwa kwamandla kosizo. Qinisekisa ukuthi ayikwazi ukuxhunywa kabusha ungaqondile!

Gcina umoya ohlanzekile uzungeze iyunithi futhi ungapakishi noma iyiphi into kuyo. Futhi indawo yokushisa engu-10-15 cm kufanele igcinwe lapho idivayisi eseduze ingumthombo wokushisa.
Ukukhweza umumo ngaphandle kokuma okujwayelekile noma ukusebenza ngaphansi kwezinga lokushisa le-ambient eliphezulu kungase kwenyuse izinga lokushisa lengxenye yangaphakathi futhi kuzodinga ukwehliswa kokulinganisa kokuphumayo kwamandla.
Isilinganiso samanje sekhebula eyinhloko/yesibili egunyaziwe kufanele sibe sikhulu noma silingane neseyunithi. Sicela ubhekisele ekucacisweni kwayo.

Kubashayeli be-LED abanezixhumi ezingangeni manzi, qinisekisa ukuthi ukuxhumana phakathi kweyunithi nendawo yokukhanyisa kuqinile ukuze amanzi angakwazi ukungena kusistimu.
Kumashayeli e-LED acimeka, qiniseka ukuthi isilawuli sakho sokufiphalisa siyakwazi ukushayela lawa mayunithi.Uchungechunge lwe-PWM ludinga u-0.15mA iyunithi ngayinye.
Tc ubuningi. ikhonjwa kulebula yomkhiqizo. Sicela uqiniseke ukuthi izinga lokushisa le-Tc point ngeke lidlule umkhawulo.

UNGAXHUMI “DIM- to -V”.
Ifanele ukusetshenziswa kwangaphakathi noma ukusetshenziswa ngaphandle ngaphandle kokuchayeka elangeni okuqondile. Sicela ugweme ukucwiliswa emanzini ngaphezu kwemizuzu engama-30.
Ukunikezwa kwamandla kuthathwa njengengxenye ezosetshenziswa ngokuhambisana nemishini yokugcina. Njengoba ukusebenza kwe-EMC kuzothintwa ukufakwa okuphelele, abakhiqizi bemishini yokugcina kumele baphinde bafanelekele i-EMC

Iziqondiso ekufakweni okuphelele futhi.

Amadokhumenti / Izinsiza

ISHO KAHLE PWM-120 Series 120W Constant Voltage PWM Output LED Driver [pdf] Imaniwali yosebenzisayo
PWM-120-12, PWM-120-24, PWM-120-36, PWM-120 Series, 120W Constant Voltage PWM Output LED Driver, PWM-120 Series 120W Constant Voltage PWM Output LED Driver, Constant Voltage PWM Output LED Driver, Voltage PWM Output LED Driver, PWM Output LED Driver, Output LED Driver, LED Driver, Driver

Izithenjwa

Imaniwali yosebenzisayo