MW PW M -120 120W Constant Voltage PWM Output LED Driver

Izici

• I-vol evamiletage PWM isitayela okukhiphayo
• Isicelo sokukhanyisa izimo eziphuthumayo siyatholakala ngokuya nge-IEC61347-2-13
• Umsebenzi owakhelwe ngaphakathi we-PFC nomklamo wesigaba II
• Akukho ukusetshenziswa kwamandla okulayisha <0.5W/ ukusetshenziswa kwamandla okulindile <0.5W(DA/DA2-uhlobo)
• Ihlanganiswe ngokugcwele nezinga le-IP67
• Izinketho zomsebenzi: 3 ku-1 dimming (dim-to-off); I-DALVDALI-2
• Ileveli encane yokufiphala engu-0.2% yohlobo lwe-DALI
• Isikhathi sokuphila esijwayelekile> amahora angu-50000 kanye newaranti yeminyaka emi-5

Izinhlelo zokusebenza

• Ukukhanyisa kwe-strip ye-LED
• Ukukhanyisa kwe-LED kwangaphakathi
• Ukukhanyisa kwe-LED kokuhlobisa
• Ukukhanyisa kwezakhiwo ze-LED
• Izibani zezimboni
• Thayipha u-“HL” ozosetshenziswa ekilasini I, ukuhlukanisa 2 indawo eyingozi (ehlukanisiwe).

Incazelo

Uchungechunge lwe-PWM-120 ingumshayeli we-120W AC/DC LED ofaka ivolthi engaguquki.tagImodi ye-e ephumayo ngesitayela se-PWM, ekwazi ukugcina izinga lokushisa lombala kanye ne-homogeneity yokukhanya lapho ushayela zonke izinhlobo zemigqa ye-LED. I-PWM-120 isebenza kusukela ku-90~305VAC futhi inikeza amamodeli anevolumu ehlukile elinganiselwetagesukela phakathi kuka-12V kanye no-48V. Ngenxa yokusebenza kahle okuphezulu okufika ku-90.5%, ngedizayini engena fan, lonke uchungechunge luyakwazi ukusebenza ku--40C ~ +90C icala lokushisa ngaphansi kwe-convection yomoya yamahhala. Lonke uchungechunge lulinganiselwe ngezinga lokuvikela lokungena le-IP67 futhi lifanele ukusebenzela okomile, damp noma izindawo ezimanzi. I-PWM-120 ifakwe umsebenzi wokufiphalisa oshintshayo umjikelezo wemisebenzi wokukhiphayo, ohlinzeka ngokuguquguquka okukhulu kwezinhlelo zokusebenza zemigqa ye-LED.

Ukumiswa kwekhodi kwemodeli

INKCAZO

INDLELA		I-PWM-120-12	I-PWM-120-24	I-PWM-120-36	I-PWM-120-48
OKUPHUMAYO	DC VOLTAGE	12V	24V	36V	48V
	ILINGANISWE NJENGAMANJE	10A	5A	3.4A	2.5A
	AMANDLA AKALIWE	120W	120W	122.4W	120W
	IBANGA LOKUPHIMA	0 ~ 100%
	IZIMPENDULO ZE-PWM (Uhlobo.)	1.47kHz Yokungenalutho/DA-Type, 2.5kHz ku-DA2-Type
	UKUMISELA, VUKA ISIKHATHI Inothi. 2 Inothi. 9	500ms, 80ms/230VAC noma 115VAC
	ISIKHATHI SOKUMUSA (Uhlobo.)	16ms / 230VAC noma 115VAC
INPUT	I-VOLTAGE RANGE Qaphela.3	90 ~ 305VAC 127 ~ 431VDC (Sicela ubhekisele esigabeni esithi “STATIC CHARACTERISTIC”)
	IFREQUENCY RANGE	I-47 ~ 63Hz
	AMANDLA FUTHI (Uhlobo.)	I-PF> 0.97 / 115VAC, PF> 0.96 / 230VAC, PF> 0.93 / 277VAC @ umthwalo ogcwele (Sicela ubhekisele esigabeni esithi “POWER FACTOR (PF) CHARACTERISTIC”)
	TOTAL IHARMONIC UKUPHAZAMISEKA	I-THD< 20%(@load≧60%/115VAC, 230VAC; @load≧75%/277VAC) (Sicela ubheke esigabeni esithi “TOTAL HARMONIC DISTORTION”)
	UKUSEBENZA (Uhlobo.)	88.5%	90%	90%	90.5%
	I-AC CURRENT (Uhlobo.)	1.3A / 115VAC 0.65A / 230VAC 0.55A / 277VAC
	INRUSH CURRENT (Uhlobo.)	I-COLD START 60A(twidth=520μs ilinganiswa ngo-50% Ipeak) kokuthi 230VAC; Ngokwe-NEMA 410
	MAX. CHA. yama-PSU ku-16A CIRCUIT BREAKER	amayunithi ayi-4 (i-circuit breaker yohlobo B) / amayunithi angama-6 (i-circuit breaker yohlobo C) ku-230VAC
	UKUVUZA NJENGAMANJE	<0.25mA / 277VAC
	AKUKHO UKUSETSHENZISWA KWAMANDLA OMTHETHO/OKULINDILE	Akukho ukusetshenziswa kwamandla okulayisha<0.5w kuhlobo olungenalutho; ukusetshenziswa kwamandla okulindile<0.5W kuhlobo lwe-DA/DA2-uhlobo
UKUVIKELA	LAYISHA	108 ~ 130% amandla okukhiphayo alinganiselwe
		Imodi ye-Hiccup, ilulama ngokuzenzakalelayo ngemva kokususwa kwesimo sephutha
	WESIFUNDA ESIFISHANE	Imodi ye-hiccup engu-12V/24V kanye nemodi yokuvala engu-36V/48V (okuhlanganisa uhlobo lwe-DA/ngaphandle kohlobo lwe-DA2) Imodi ye-Hiccup, ilulama ngokuzenzakalelayo ngemva kokususwa kwesimo sephutha (ngohlobo lwe-DA2 kuphela)
	NGAPHEZU KWE-VOLTAGE	15 ~ 17V	28 ~ 34V	41 ~ 46V	54 ~ 60V
		Vala i-o/p voltage, vula amandla kabusha ukuze ululame
	NGENXA KWETEMPERATURE	Vala i-o/p voltage, vula amandla kabusha ukuze ululame
EZIMO	I-TEMP YOKUSEBENZA.	Tcase=-40 ~ +90℃ (Sicela ubhekisele esigabeni esithi “ OUTPUT LOAD vs TEMPERATURE”)
	MAX. CASE TEMP.	Isikhwama = + 90 ℃
	UKUSEBENZA UKUTHOBEKA	Ama-20 ~ 95% RH angavumeli
	ISITOREJI TEMP., HUMIDITY	-40 ~ + 80 ℃, 10 ~ 95% RH
	ISIKHATHI. OKUQINISEKILE	±0.03%/℃ (0 ~ 45℃, ngaphandle kuka-0 ~ 40℃ ngo-12V)
	UKUDLIZELA	10 ~ 500Hz, 5G 12min./1cycle, isikhathi se-72min. ngayinye ihambisana nezimbazo ezingu-X, Y, Z
UKUPHEPHA & I-EMC	UKUPHEPHA AMAZINGA Inothi. 5	UL8750( uhlobo ”HL” )(ngaphandle kohlobo lwe-12DA), CSA C22.2 No. 250.13-12; I-ENEC BS EN/EN61347-1, BS EN/EN61347-2-13, BS EN/EN62384 ezimele, IP67,BIS IS15885( ye-PWM-120-12,24 kuphela), EAC TP TC 004,GB19510.1 GB 19510.14 kugunyaziwe; Idizayini ibhekisela ku-BS EN/EN60335-1; Ngokwe-BS EN/EN61347-2-13 isithasiselo J esilungele izimo eziphuthumayo ukufakwa
	AMAZINGA E-DALI	I-IEC62386-101, 102, 207,251 ye-DA/DA2-Type kuphela, uhlobo lwedivayisi 6(DT6)
	INGABE I-VOLTAGE	I/PO/P:3.75KVAC; I/P-DA:1.5KVAC; I-O/P-DA:1.5KVAC
	UKUMELANA UKUZIHLUPHA	I/PO/P:100M Ohms / 500VDC / 25℃/ 70% RH
	EMC UKUVUSELELWA  Inothi. 6	Ukuthobela i-BS EN / EN55015, i-BS EN / EN61000-3-2 Class C (@ umthwalo ≧ 60%); I-BS EN / EN61000-3-3, i-GB17743 ne-GB17625.1, i-EAC TP TC 020
	UKUVIKELWA EMC	Ukuhambisana ne-BS EN/EN61000-4-2,3,4,5,6,8,11; I-BS EN/EN61547, izinga lemboni yokukhanya (surge immunity Line-Line 2KV), EAC TP TC 020
ABANYE	MTBF	2243.7K amahora iminithi. I-Telcordia SR-332 (Bellcore); 228.7K amahora iminithi. I-MIL-HDBK-217F (25℃)
	DIMENSION	191*63*37.5mm (L*W*H)
	UKUPAKA	0.97Kg; 15pcs / 15.6Kg / 0.87CUFT
QAPHELA	1. Wonke amapharamitha OKUNGEYONA okukhethekile akalwa kokufaka okungu-230VAC, kukalwe okwamanje kanye no-25C wezinga lokushisa elizungezile. 2. Ukwehliswa kwesilinganiso kungase kudingeke ngaphansi kwevolumu ephansi yokufakatages. Sicela ubheke izigaba "STATIC CHARACTERISTIC" ukuze uthole imininingwane. 3. Ubude besikhathi sokusetha bulinganiswa ekuqaleni okubandayo. UKUVULA/UKUVALA umshayeli kungaholela ekwandeni kwesikhathi sokusetha. 4. Umshayeli uthathwa njengengxenye ezosetshenziswa ngokuhambisana nemishini yokugcina. Njengoba ukusebenza kwe-EMC kuzothinteka ngokufakwa okuphelele, abakhiqizi bezinto zokugcina kufanele baphinde bafanelekele i-EMC Directive ekufakweni okuphelele futhi. 5. Lolu chungechunge luhlangabezana neminyaka yokuphila evamile > yamahora angu-50,000 okusebenza lapho i-Tcase, ikakhulukazi (tc) iphuzu (noma i-TMP. nge-DLC ngayinye), icishe ibe ngama-75Cor ngaphansi. 6. Sicela ubheke isitatimende sewaranti ku-MEAN WELL's webisayithi ku-http://www.meanwell.com 7. Izinga lokushisa le-ambient liyancipha libe ngu-3.5°C/1000m elinamamodeli angena fan futhi elingu-5C/1000m elinamamodeli amafeni wobude bokusebenza obungaphezu kuka-2000m(6500ft). 8. Nganoma iyiphi inothi lesicelo kanye nesexwayiso sokufakwa kwe-IP umsebenzi wokufaka ubufakazi bamanzi, sicela ubheke imanuwali yethu yomsebenzisi ngaphambi kokuyisebenzisa. https://www.meanwell.com/Upload/PDF/LED_EN.pdf 9. Ngokusekelwe kumandla we-IEC 62386-101/102 DALI kumithetho yesikhathi nokuphazamiseka, isikhathi sokusetha sidinga ukuhlola ngesilawuli se-DALI ingasekela amandla e-DALI emsebenzini, ngaphandle kwalokho isikhathi sokusetha sizoba phezulu kunesekhondi elingu-0.5 ohlotsheni lwe-DA. x Umshwana Wokuzikhipha Emthwalweni Wesibopho Somkhiqizo: Ukuze uthole imininingwane enemininingwane, sicela ubheke ku-https://www.meanwell.com/serviceDisclaimer.aspx

UMSEBENZI WOKUNQAMULA

Isimiso sokufiphalaza sokukhishwa kwesitayela se-PWM
Ukufiphaza kutholakala ngokuhlukahluka komjikelezo womsebenzi wamanje wokukhipha.

3 kokungu-1 kokufiphalisa umsebenzi (Ngohlobo Olungenalutho)

• Sebenzisa enye yezindlela ezintathu phakathi kwe-DIM+ ne-DIM-: 0 ~ 10VDC, noma isignali ye-PWM engu-10V noma ukumelana.
• Umthombo ofiphalayo wamanje kusuka kumandla kagesi: 100μA (uhlobo.)

◎ Ukusebenzisa isithasiselo 0 ~ 10VDC

◎ Ukusebenzisa isiginali ye-10V PWM engeziwe (ububanzi befrikhwensi 100Hz ~ 3KHz):

Ukusebenzisa ukumelana nesengezo:

Qaphela:

1. Okuncane. umjikelezo womsebenzi wokukhiphayo wamanje cishe u-0.15%, futhi okokufaka kokufiphalisa cishe ku-6KΩ noma 0.6VDC, noma isignali engu-10V PWM enomjikelezo womsebenzi ongu-6%.
2. Umjikelezo womsebenzi wokukhiphayo wamanje ungase wehle ufike ku-0% lapho okokufaka kokufiphalisa kungaphansi kuka-6KΩ noma ngaphansi kuka-0.6VDC, noma isignali engu-10V PWM enomjikelezo wemisebenzi ongaphansi kuka-6%.

I-DALI Interface (uhlangothi oluyinhloko; lwe-DA/DA2-Type)

• Faka isignali ye-DALI phakathi kwe-DA+ ne-DA-.
• Iphrothokholi ye-DALI inamaqembu ayi-16 namakheli angama-64.
• Isinyathelo sokuqala simi ku-0.2% womkhiqizo

OUTPUT LOAD vs TEMPERATURE

ISIKHATHI SOKUPHILA

Umdwebo weBlock

Ukucaciswa Kwemishini

• Uhlobo Olungenalutho
• I-DA/DA2-Type

Ncoma ukukhonjwa indlela

Imanuwali yokufaka

Ukuxhumana kohlobo olungenalutho

Izixwayiso

• Ngaphambi kokuqala umsebenzi wokufaka noma wokulungisa, sicela unqamule ukunikezwa kwamandla f ‧ rom insiza. Qinisekisa ukuthi ayikwazi ukuxhunywa kabusha ungaqondile!
• Gcina umoya ohlanzekile uzungeze iyunithi futhi ungapakishi noma iyiphi into kuyo. Futhi indawo yokushisa engu-10-15 cm kufanele igcinwe lapho idivayisi eseduze ingumthombo wokushisa.
• Ukukhweza umumo ngaphandle kokuma okujwayelekile noma ukusebenza ngaphansi kwezinga lokushisa le-ambient eliphezulu kungase kwenyuse izinga lokushisa lengxenye yangaphakathi futhi kuzodinga ukwehliswa kokulinganisa kokuphumayo kwamandla.
• Isilinganiso samanje sekhebula eyinhloko/yesibili egunyaziwe kufanele sibe sikhulu noma silingane neseyunithi. Sicela ubhekisele ekucacisweni kwayo.
• Kubashayeli be-LED abanezixhumi ezingangeni manzi, qinisekisa ukuthi ukuxhumana phakathi kweyunithi nendawo yokukhanyisa kuqinile ukuze amanzi angakwazi ukungena kusistimu.
• Kumashayeli e-LED acimeka, qiniseka ukuthi isilawuli sakho sokufiphalisa siyakwazi ukushayela lawa mayunithi.Uchungechunge lwe-PWM ludinga u-0.15mA iyunithi ngayinye.
• Tc ubuningi. ikhonjwa kulebula yomkhiqizo. Sicela uqiniseke ukuthi izinga lokushisa le-Tc point ngeke lidlule umkhawulo.
• UNGAXHUMI “DIM- to -V”.
• Ifanele ukusetshenziswa kwangaphakathi noma ukusetshenziswa ngaphandle ngaphandle kokuchayeka elangeni okuqondile. Sicela ugweme ukucwiliswa emanzini ngaphezu kwemizuzu engama-30.
• Ukunikezwa kwamandla kubhekwa njengengxenye ezosetshenziswa ngokuhambisana nemishini yokugcina. Njengoba ukusebenza kwe-EMC kuzothintwa ukufakwa okuphelele, abakhiqizi bemishini yokugcina kufanele baphinde bafanelekele i-EMC Directive ekufakweni okuphelele futhi.

Amadokhumenti / Izinsiza

MW PW M -120 120W Constant Voltage PWM Output LED Driver [pdf] Incwadi Yomnikazi I-PW M -120 120W Ivolumu Eqhubekayotage PWM Output LED Driver, PW M -120, 120W Constant Voltage PWM Output LED Driver, Output LED Driver

Izithenjwa

• Imaniwali yosebenzisayo