I-KMC FlexStat BACnet Advanced Application Controller

Ulwazi Lomkhiqizo

I-KMC Conquest BAC-19xxxx FlexStat iyithuluzi lezingxenyekazi zekhompuyutha ezizenzakalelayo elakhelwe ukulawula izinga lokushisa kanye nokuhlala ezakhiweni zezentengiselwano. Iza namamodeli amaningi kanye nezinketho zokufanela izinhlelo zokusebenza ezahlukene. Idivayisi inojeke owakhelwe ngaphakathi we-Ethernet wokuxhumana okulula kwenethiwekhi. Idivayisi idinga ukukhwezwa okufanele kanye nezintambo ukuze isebenze kahle.

Imiyalo yokusetshenziswa komkhiqizo

1. Khetha imodeli efanelekile: Bheka ku-BAC-190000 Series FlexStats Data Sheet kokuthi kmccontrols.com ukuze ukhethe imodeli efanelekile yohlelo lwakho lokusebenza oluhlosiwe kanye nezinketho.
2. Faka futhi ufake iyunithi: Landela imiyalelo enikezwe kulo mbhalo kanye ne-BAC-19xxxx FlexStat Sequence of Operation and Wiring Guide ukuze ukhweze futhi ufake intambo iyunithi. Qinisekisa ukuthi ukuvala amakhebula kuhlangabezana namakhodi okwakha endawo. Sebenzisa kuphela isikulufu sokukhweza esilethwe Izilawuli ze-KMC ukuze ugweme ukulimaza i-FlexStat. Uma ushintsha i-FlexStat endala, buyisela ne-backplate.
3. Lungiselela futhi usebenzise iyunithi: Landela imiyalelo enikezwe kulo mbhalo kanye ne-BAC-19xxxx FlexStat Application Guide ukuze ulungiselele futhi usebenzise iyunithi.
4. Xazulula noma yiziphi izinkinga: Uma kudingeka, bheka ku-BAC-19xxxx FlexStat Application Guide ukuze uxazulule noma yiziphi izinkinga.

Qaphela: Ukuze uthole ulwazi olwengeziwe, vakashela Izilawuli ze-KMC webindawo yemibhalo yakamuva.

Ukucatshangelwa Kwezintambo Zomkhiqizo

Bheka i-BAC-19xxxx FlexStat Sequence of Operation and Wiring Guide yeample wiring yezinhlelo zokusebenza ezahlukene. Landela ukucatshangelwa kwezintambo okubalulekile okunikezwe ku-BAC-19xxxx FlexStat Application Guide. Qinisekisa ukuthi ukuvala amakhebula kuhlangabezana namakhodi okwakha endawo. Uma ushintsha i-FlexStat endala, buyisela ne-backplate.

Ukukhwezwa Komkhiqizo

Landela imiyalo engezansi ukufaka i-FlexStat:

• Ukuze uthole ukusebenza kahle kwenzwa yokushisa, khweza i-FlexStat odongeni lwangaphakathi kude nemithombo yokushisa, ukukhanya kwelanga, amawindi, izimbobo zomoya, nezithiyo zokujikeleza komoya (isb, amakhethini, ifenisha).
• Ngemodeli enenketho yenzwa yokuhlala, yifake lapho izoba nokungavinjwanga khona view endaweni ejwayelekile kakhulu yethrafikhi. Bheka Inzwa Yegumbi kanye Nendawo Yokukhwezwa Kwe-Thermostat kanye Nomhlahlandlela Wohlelo Lokusebenza Lokulungisa ukuze uthole ulwazi olwengeziwe.
• Uma ushintsha i-thermostat ekhona, lebula izintambo njengoba kudingeka ukuze uthole ireferensi lapho ususa i-thermostat ekhona.
• Qedela izintambo eziqinile endaweni ngayinye ngaphambi kokufakwa kwe-FlexStat.
• Sebenzisa kuphela isikulufu sokukhweza esilethwe Izilawuli ze-KMC ukuze ugweme ukulimaza i-FlexStat. Ungasondeli isikulufu kude kunokudingekile ukuze ususe ikhava.
• Uma ikhava ikhiyiwe ku-backplate, vula isikulufu se-hex ngaphansi kwe-FlexStat ngokwewashi kuze kube isikulufu sivele sisule ikhava.

Qaphela: Bheka kuMfanekiso 1 ukuthola ubukhulu nolwazi lokukhweza.

UKUQALA NGOKUSHESHA

Qedela izinyathelo ezilandelayo ukuze ukhethe futhi ufake i-KMC Conquest BAC-19xxxx FlexStat:

1. Khetha imodeli efanelekile yohlelo oluhlosiwe nezinketho (bona i-BAC-190000 Series FlexStats Data Sheet kokuthi kmccontrols. com).
2. Faka futhi ufake iyunithi ngezintambo (bona lo mbhalo kanye ne-BAC-19xxxx FlexStat Sequence of Operation and Wiring Guide).
3. Lungiselela futhi usebenzise iyunithi (bona lo mbhalo kanye ne-BAC-19xxxx FlexStat Application Guide).
4. Uma kudingeka, xazulula izinkinga (bona i-BAC-19xxxx FlexStat Application Guide).

QAPHELA: Lo mbhalo unikeza ulwazi oluyisisekelo lokukhweza, izintambo, kanye nokusetha. Ukuze uthole ulwazi olwengeziwe, bheka Izilawuli ze-KMC web indawo yemibhalo yakamuva.

ISEXWAYISO: Amamodeli we-BAC-19xxxx AKUKHO kusebenzisana namaplate angemuva e-BAC- 10xxx/12xxxx/13xxxx/14xxxx FlexStats endala! Uma ushintsha i-FlexStat endala, buyisela ne-backplate.

ISAZISO: QAPHELA IZIQINISEKISO ZOKUBAMBA AMADIVAYISI ABONAKALA KA-ELECTROSTATIC

OKUCABANGA NGAKHO

Bheka i-BAC-19xxxx FlexStat Sequence of Operation and Wiring Guide yeample wiring yezinhlelo zokusebenza ezahlukene. Bheka i-BAC-19xxxx FlexStat Application Guide ukuze uthole ukucatshangelwa okwengeziwe okubalulekile kwezintambo.

ISEXWAYISO: Amamodeli we-BAC-19xxxx AKUKHO kusebenzisana namaplate angemuva e-BAC- 10xxx/12xxxx/13xxxx/14xxxx FlexStats endala! Uma ushintsha i-FlexStat endala, buyisela ne-backplate.

• Ngenxa yokuxhumana okuningi (amandla, inethiwekhi, okokufaka, okuphumayo, nezizathu ezihlukene noma ukushintshaniswa okujwayelekile), qiniseka ukuthi izintambo zihlelwe kahle ngaphambi kokufaka ipayipi!
• Qinisekisa ukuthi i-conduit yazo zonke izintambo ine-diameter eyanele yazo zonke izintambo ezidingekayo. Kunconywa ukusebenzisa i-conduit engu-1 intshi namabhokisi okuhlanganayo! Sebenzisa amabhokisi okuhlangana angaphandle ngaphezu kosilingi noma kwenye indawo elula njengoba kudingeka ukuze wenze ukuxhumana okugijima ebhokisini lokuhlangana le-FlexStat.
• Ukuvimbela ivolumu ngokweqiletage drop, sebenzisa usayizi we-conductor owanele ubude bezintambo! Vumela "umcamelo" omningi ukuvumela iziqongo ezidlulayo ngesikhathi sokuqalisa.
• Kusetshenziswa izintambo zamakhondatha amaningi kukho konke okokufaka (isb., ikhondakta engu-8) kanye nokuphumayo (isb., ikhondakta engu-12) kuyanconywa. Izizathu zawo wonke ama-inputs zingahlanganiswa ngocingo olulodwa.

UKUKHUBUKA

DIMENSIONS
A	3.874 amayintshi	99.4 mm
B	5.124 amayintshi	130.1 mm
C	1.301 amayintshi	33.0 mm

QAPHELA

• Ukuze isebenze kahle kakhulu inzwa yokushisa, i-FlexStat kufanele igxunyekwe odongeni lwangaphakathi futhi iqhelelane nemithombo yokushisa, ukukhanya kwelanga, amawindi, izimbobo zomoya, nezithiyo zokujikeleza komoya (isb, amakhethini, ifenisha).
• Ukwengeza, kumodeli enenketho yenzwa yokuhlala, yifake lapho izobe ingavimbekile khona view endaweni ejwayelekile kakhulu yethrafikhi. Bona Inzwa Yegumbi kanye Nendawo Yokukhwezwa Kwe-Thermostat Nomhlahlandlela Wohlelo Lokusebenza Lokulungisa.
• Uma ushintsha i-thermostat ekhona, lebula izintambo njengoba kudingeka ukuze uthole ireferensi lapho ususa i-thermostat ekhona.

1. Qedela izintambo eziqinile endaweni ngayinye ngaphambi kokufakwa kwe-FlexStat. Ukufakwa kwekhebula kufanele kuhlangabezane namakhodi okwakha endawo.
   • ISEXWAYISO: Sebenzisa kuphela isikulufu sokukhweza esinikezwe Izilawuli ze-KMC. Ukusebenzisa ezinye izikulufu kungalimaza i-FlexStat. Ungasondeli isikulufu kude kunokudingekile ukuze ususe ikhava.
2. Uma ikhava ikhiyiwe ku-backplate, vula isikulufu se-hex phansi kwe-FlexStat ngokwewashi kuze kube isikulufu (nje) sisula ikhava. (Bheka Umfanekiso 2.)
   • QAPHELA: Isikulufu se-hex kufanele sihlale ku-backplate.
3. Donsela phansi kwekhava kude ne-backplate (isisekelo esikhuphukayo).
4. Hambisa izintambo ngembobo emaphakathi ye-backplate.
5. Ngombhalo othi “PHEZULU” kanye nemicibisholo ebheke kusilingi, faka i-backplate ebhokisini likagesi usebenzisa izikulufu ezinikeziwe.
   • QAPHELA: uModels agibela ngokuqondile emabhokisini aqondile angu-2 x 4 amayintshi, kodwa adinga ipuleti lokukhweza odongeni le-HMO- 10000W lamabhokisi angu-4 x 4.
6. Yenza uxhumano olufanele kumatheminali kanye (kumamodeli e-Ethernet) nojeke oyimojuli. (Bheka Uxhumo Lwenethiwekhi, Izinzwa Nezisetshenziswa, kanye Noxhumano Lwamandla.
   • Bheka futhi I-BAC-19xxxx FlexStat Sequence of Operation and Wiring Guide, kanye ne-BAC- 19xxxx FlexStat Application Guide.)
7. NGEMVA kokuba izintambo seziqediwe, beka ngokucophelela ingaphezulu lekhava ye-FlexStat ngaphezulu kwe-backplate, swayikisa phansi isembozo phansi, bese ucindezela ikhava endaweni yayo.
   • ISEXWAYISO: Lapho ufaka kabusha ikhava ku-backplate, qaphela ukuthi ungalimazi noma ukhiphe noma yiziphi izintambo noma izingxenye. Ungasebenzisi amandla amaningi. Uma kukhona okubophayo, khipha ikhava bese uhlola izikhonkwane nezixhumi zesokhethi yetheminali.
8. Vula isikulufu se-hex ngezansi ngokuphikisana newashi size sihlanganise ikhava futhi usibambe endaweni.

UKUXHUMANA KWENethiwekhi

1. Kumamodeli e-BAC-19xxxxCE (kuphela), xhuma ikhebula lesichibi se-Ethernet ngemuva kwe-FlexStat.
   • QAPHELA: Ikhebuli yokuchibiyela ye-Ethernet kufanele ibe yi-T568B Isigaba 5 noma okungcono futhi ibe umkhawulo wamafidi angu-328 (amamitha angu-100) phakathi kwamadivayisi.
     • Xhuma (Ongakukhetha) Inethiwekhi ye-MS/TP
   • ISEXWAYISO: Ukuze ugweme umonakalo ovela ezihibeni zaphansi nezinye izindaba zokuxhumana kumodeli ye-MS/TP ye-FlexStats yenethiwekhi, ukubeka izigaba okulungile kunethiwekhi ye-MS/TP kanye noxhumo lwamandla KUZO ZONKE izilawuli ezinenethiwekhi kubaluleke kakhulu!

QAPHELA: Bheka i-BAC-19xxxx FlexStat Application Guide ukuze uthole ukucatshangelwa kwezintambo ezengeziwe.

1. Kumamodeli angewona ama-E (kuphela), xhuma inethiwekhi ye-BACnet kumatheminali e-BACnet MS/TP usebenzisa ikhebula elisontiwe elivikelekile.
   • QAPHELA: Sebenzisa ikhebula elisontekile elingu-18 noma elingu-22 legauge ye-AWG enamandla amakhulu angu-51 picofarad ngonyawo (amamitha angu-0.3) kuzo zonke izintambo zenethiwekhi. Ngena ngemvume futhi ubone I-EIA-485 Network Wire Recommendations Technical Bulletin ukuze uthole izincomo. Ukuze uthole izimiso nezinqubo ezinhle lapho uxhuma inethiwekhi ye-MS/TP, bheka Ukuhlela Amanethiwekhi e-BACnet (Isaziso Sohlelo AN0404A).
   • Xhuma amatheminali -A ngokuhambisana nawo wonke amanye amatheminali -A kunethiwekhi:
   • Xhuma amatheminali +B ngokuhambisana nawo wonke amanye amatheminali +B kunethiwekhi.
   • Xhuma izihlangu zekhebula ndawonye kudivayisi ngayinye usebenzisa i-wire nut (noma itheminali engu-S kwezinye izilawuli ze-KMC BACnet).
   • QAPHELA: Itheminali ye-S (Shield) kuzilawuli ze-KMC inikezwa njengendawo yokuxhuma yesihlangu. Itheminali ayixhunyiwe phansi kwesilawuli. Uma uxhumeka kuzilawuli ezivela kwabanye abakhiqizi, qinisekisa ukuthi uxhumano lwehawu aluxhunyiwe endaweni yesilawuli.
2. Xhuma isihlangu sekhebula endaweni ekahle yomhlaba endaweni eyodwa kuphela.
   • QAPHELA: Amadivayisi asemikhawulweni ephathekayo yamasegimenti ezintambo ze-MS/TP kumele abe nokunqanyulwa kwe-EOL (End Of Line) ukuze inethiwekhi isebenze kahle. Qinisekisa ukuthi iswishi ye-FlexStat EOL isendaweni efanele.
3. Uma i-FlexStat isekupheleni ngokomzimba kolayini wenethiwekhi ye-MS/ TP (intambo eyodwa kuphela kutheminali ethi -A noma +B), setha womabili amaswishi e-EOL ukuthi Vuliwe ngemuva kwebhodi lesifunda. Uma kungenjalo ekugcineni kolayini (izintambo ezimbili kutheminali ngayinye), qinisekisa ukuthi womabili amaswishi Avaliwe.

IZInzwa NEZINXHUBO ZOKUXHUMANEKA

Okokufaka Ukuxhumana

1. Faka ucingo noma yiziphi izinzwa ezengeziwe kumatheminali okufakwayo afanelekile. Bona i-BAC-19xxxx FlexStat Sequence of Operation and Wiring Guide. (Lezi zinhlelo zokusebenza ziyizinhlelo ezipakishiwe ezikhethekayo kumamodeli we-BAC-19xxxx.)
   • QAPHELA: Sebenzisa isofthiwe ye-KMC ukuze ulungiselele kahle amadivayisi. Emishinini yokufaka ye-passive (isb, shintsha abathintwayo kanye nama-thermistors angu-10K ohm), setha ukunqanyulwa kube indawo engu-10K Ohm. Okwevolumu esebenzayotage, ibeke endaweni engu-0 kuye ku-12 ye-VDC.
   • QAPHELA: Okokufaka kwe-analog okungasetshenzisiwe kungaguqulelwa kokokufaka kanambambili ngokuchofoza kwesokudla into efakiwe ku-software ye-KMC nokukhetha Guqula ukuze....
   • QAPHELA: Osayizi bezintambo 14–22 AWG bangaba clamped kutheminali ngayinye. Azikho izintambo ezimbili ze-16 AWG ezingahlanganiswa endaweni efanayo.

Okukhiphayo Connections

1. Imishini eyengeziwe yocingo (njengabalandeli, dampers, namavalvu) kumatheminali afanelekile okukhiphayo. Bona i-BAC-19xxxx FlexStat Sequence of Operation and Wiring Guide. Xhuma idivayisi ngaphansi kolawulo phakathi kwetheminali oyifunayo kanye netheminali ehlobene ye-SC (I-Switched Common for relays) noma i-GND (Ground for analog outputs) itheminali.

QAPHELA

• Ebhange lama-relay amathathu, kunokuxhumana okukodwa Okushintshiwe (okudluliselwe) Okujwayelekile (esikhundleni setheminali ye-GND esetshenziswa nokuphumayo kwe-analog).
  • (Bheka Umfanekiso 11.) Ngomjikelezo wokudlulisa, uhlangothi lwesigaba se-AC kufanele luxhunywe kutheminali ye-SC. I-FlexStat edluliselwe ithi CHA, SPST (Ifomu “A”).
• Okuphumayo kwe-analog okungasetshenzisiwe kungaguqulelwa kokuphumayo kanambambili ngokuchofoza kwesokudla into ephumayo kusofthiwe ye-KMC nokukhetha ukuguqula ku-Binary Object.

ISEXWAYISO

• Unganamathiseli idivayisi edonsa okwamanje okwedlula umthamo we-FlexStat:
• Umkhawulo ophezulu wokukhiphayo wamanje wemiphumela ngayinye ye-ANALOG/UNIVERSAL ngu-100 mA (ku-0–12 VDC) noma isamba esingu-100 mA kubhange ngalinye lemiphumela emithathu ye-analog.
• Ubukhulu. okukhiphayo okwamanje ngu-1 A we-RELAYS ngayinye ku-24 VAC/VDC noma isamba esingu-1.5 A kuma-relay 1–3 noma 4–6.
• Ukudluliselwa okwe-Class-2 voltages (24 VAC) kuphela. Ungaxhumi umugqa wevolumutage ekusakazweni!
• Ungaxhumeki ngephutha i-24 VAC endaweni yokukhipha i-analog. Lokhu akufani ne-Relay's (SC) Switched Common. Bona ilebula yetheminali ye-backplate ukuze uthole itheminali elungile.

UKUXHUMANA KWAMANDLA

ISEXWAYISO

Ukuze ugweme umonakalo ovela ezihibeni zaphansi nezinye izindaba zokuxhumana kumodeli ye-MS/TP ye-FlexStats yenethiwekhi, ukubeka izigaba okulungile kunethiwekhi ye-MS/TP kanye noxhumo lwamandla KUZO ZONKE izilawuli ezinenethiwekhi kubaluleke kakhulu!

QAPHELA: Landela yonke imithetho yendawo namakhodi ezintambo.

1. Xhuma i-24 VAC, i-Class-2 transformer (noma i-24 VDC power supply) kumatheminali kagesi (bona Umfanekiso 12):
   • Xhuma uhlangothi olumaphakathi lwe-transformer kutheminali evamile (-/C). .
   • Xhuma uhlangothi lwesigaba se-AC se-transformer kutheminali yesigaba (~/R). .

QAPHELA

• Xhuma isilawuli esisodwa ku-transformer ngayinye ngentambo yethusi engu-14—22 AWG.
• Ukuze uthole ulwazi ngezimiso nezinqubo ezinhle lapho uxhuma ama-transformer, bheka Amathiphu Wokuxhuma I-24-Volt Power Application Note (AN0604D).
• Ukuxhuma i-24 VDC (–15%, +20%) esikhundleni samandla e-VAC:
  • Xhuma i-24 VDC ku- ∼ (isigaba/R) itheminali.
  • Xhuma i-GND ku- ⊥.(evamile) itheminali.
• Sebenzisa izintambo zokuxhuma ezivikelwe noma uvale zonke izintambo epayipini ukuze ugcine imininingwane yokukhishwa kwe-RF.
• Uma amandla esetshenziswa kumatheminali, i-FlexStat izoba namandla lapho iphinda ifakwa ku-backplate. Bheka Ukukhwela.

UKULUNGISA KANYE NEZINHLELO

Ukusetha i-FlexStat kusuka esikrinini esithintwayo:

1. Cindezela bese ubamba ikhoneni eliphezulu kwesokunxele kwesikrini (ukufundwa kwezinga lokushisa emkhathini) ukuze uqale.
2. Khetha okukhethwa kukho kanye namagugu. Bheka i-BAC-19xxxx FlexStat Application Guide ukuze uthole imininingwane.

QAPHELA: Izinketho kumamenyu zincike kumodeli ye-FlexStat kanye nohlelo lokusebenza olukhethiwe.

Ukucushwa okuthuthukisiwe kwe-FlexStat kungenziwa ngesofthiwe. Bona i-BAC-190000 Series FlexStats Data Sheet ukuze uthole ithuluzi elifanele kakhulu le-KMC Controls ukuze uthole ukulungiselelwa okwengeziwe, ukuhlela (nge-Control Basic), kanye/noma ukudala izithombe zesilawuli. Bona amadokhumenti noma amasistimu osizo ethuluzi le-KMC elifanele ukuze uthole ulwazi olwengeziwe.

I-MS/TP NETWORK ACCESS PORT

Imbobo yedatha ye-MS/TP EIA-485 ngaphansi kwekhava inikeza ochwepheshe ukufinyelela kwesikhashana kunethiwekhi ye-MS/TP (hhayi i-Ethernet) besebenzisa i-HPO-5551, BAC-5051E, ne-KMC Connect. Bona imibhalo yaleyo mikhiqizo ukuze uthole imininingwane.

AMANDENI

• Ukuze ulondoloze izinga lokushisa elinembile kanye nokuswakama, susa uthuli njengoba kudingeka ezimbotsheni zokungenisa umoya phezulu nangaphansi kwekesi.
• Ukuze ulondoloze ukuzwela okukhulu kwenzwa yokunyakaza eyakhelwe ngaphakathi, ngezikhathi ezithile sula uthuli noma ukungcola kulens—kodwa ungasebenzisi noma yiluphi uketshezi kuyinzwa.
• Ukuhlanza ikesi noma isibonisi, sebenzisa intofontofo, damp indwangu (kanye nensipho ethambile uma kunesidingo).

IZINSIZA EZENGEZIWE

Usekelo lwakamuva files ahlala etholakala kokuthi Izilawuli ze-KMC web isiza (www.kmccontrols.com). Ukuze ubone konke okutholakalayo files, uzodinga ukungena ngemvume.

Bheka I-BAC-190000 Series FlexStats Data Sheet ukuze uthole:

• Imininingwane
• Izesekeli nezingxenye ezishintshayo

Bheka i-BAC-19xxxx FlexStat Sequence of Operation and Wiring Guide for:

• Sample wiring yezinhlelo zokusebenza
• Ukulandelana kokusebenza
• Okokufaka/okuphumayo kanye nokuxhumana

Bheka Umhlahlandlela Wokufaka Isicelo we-BAC-19xxxx FlexStat we:

• Ukucushwa kwezilungiselelo
• Amaphasiwedi
• Izinketho zokuxhumana
• Bonisa ukwenza ngokwezifiso
• Ukucatshangelwa kwezintambo
• CO2 nolwazi lwe-DCV
• Izinketho zokuqalisa kabusha
• Ukuxazulula inkinga

Ukuze uthole iziqondiso ezengeziwe ekucushweni ngokwezifiso nohlelo, bona isistimu yosizo ethuluzini lesofthiwe le-KMC elifanele.

ISITATIMENDE SE-FCC

QAPHELA: Le divayisi ithobela Ingxenye 15 Yemithetho ye-FCC. Ukusebenza kungaphansi kwezimo ezimbili ezilandelayo: (1) lolu cingo angeke lubangele ukuphazamiseka okuyingozi, futhi (2) lolu cingo kufanele lwamukele noma yikuphi ukuphazamiseka okutholiwe, okuhlanganisa ukuphazamiseka okungase kubangele ukusebenza okungafuneki. Imishini yedijithali ye-BAC-19xxxx Yekilasi A ithobelana ne-Canadian ICES-003.

Izinto ezikulo mbhalo ezezinjongo zolwazi kuphela. Okuqukethwe kanye nomkhiqizo owuchazayo kungashintsha ngaphandle kwesaziso. I-KMC Controls, Inc. awenzi izethulo noma iziqinisekiso maqondana nalo mbhalo. Akukho mcimbi lapho i-KMC Controls, Inc. iyoba nesibopho sanoma yimuphi umonakalo, oqondile, noma wengozi, ovela ngenxa noma ohlobene nokusetshenziswa kwalo mbhalo. Ilogo ye-KMC wuphawu lokuthengisa olubhalisiwe lwe-KMC Controls, Inc. Wonke amalungelo agodliwe.

OXHUMANA NABO

• TEL: 574.831.5250
• I-FAX: 574.831.5252
• I-IMEYILI: info@kmccontrols.com

Izilawuli ze-KMC

• 19476 Industrial Drive, New Paris, IN 46553
• 877.444.5622
• Ifeksi: 574.831.5252
• www.kmccontrols.com

© 2023 KMC Controls, Inc.

Imininingwane kanye nomklamo kungashintsha ngaphandle kwesaziso

Amadokhumenti / Izinsiza

I-KMC FlexStat BACnet Advanced Application Controller [pdf] Umhlahlandlela wokufaka I-FlexStat BACnet Advanced Application Controller, FlexStat, BACnet Advanced Application Controller, Advanced Application Controller, Application Controller

Izithenjwa

• Imaniwali yosebenzisayo