I-ICPDAS tM-AD8C 8 Imojula Yokufaka Yamanje Ehlukanisiwe Yesiteshi
Siyakuhalalisela ngokuthenga i-tM-AD8C – isixazululo esizenzakalelayo esidume kakhulu sokuqapha nokulawula izinhlelo zokusebenza. Lo mhlahlandlela Wokuqalisa Okusheshayo uzohlinzeka ngolwazi oludingekayo ukuze uqalise nge-tM-AD8C. Sicela uphinde ubheke Incwadi Yomsebenzisi ukuze uthole ulwazi oluningiliziwe mayelana nokusethwa nokusetshenziswa kwe-tM-AD8C.
NGAPHAKATHI IBHOKISI
Ngaphezu kwalo mhlahlandlela, ibhokisi lokuthumela lihlanganisa izinto ezilandelayo:
- I-tM-AD8C
UKUSEKELA KWEZOBUCHWEPHESHE
I-ICP DAS Webindawo
Ukuqonda Ukucaciswa Kwezingxenyekazi Zekhompyutha kanye Nemidwebo Yezintambo
Ngaphambi kokufaka i-hardware, kufanele ube nokuqonda okuyisisekelo kokucaciswa kwehadiwe kanye nemidwebo yezintambo.
Imininingwane Yesistimu:
I/O Imininingwane:
Uxhumano Lwezintambo:
Iphinikhodi: 
Iqalisa i-tM-AD8C ku-Init Mode
Qiniseka ukuthi iswishi ibekwe endaweni ethi "Init".
Ixhuma ku-PC kanye Nokunikezwa kwamandla
Uchungechunge lwe-tM-Series lufakwe imbobo ye-RS-485 ukuze ixhumeke kusiguquli esingu-232/USB ku-PC.
Ifaka i-DCON Utility
I-DCON Utility iyithuluzi elisebenziseka kalula elakhelwe ukunika amandla ukucushwa okulula kwamamojula we-I/O asebenzisa iphrothokholi ye-DCON.
I-DCON Utility ingatholwa ku-CD engumngane noma kusayithi le-ICPDAS FTP:
I-CD:\Napdos\8000\NAPDOS\Driver\DCON_Utility\setup\
http://ftp.icpdas.com/pub/cd/8000cd/napdos/driver/dcon_utility/
Isinyathelo sesi-2: Landela imiyalo ukuze uqedele ukufaka
Ngemuva kokuthi ukufakwa sekuqediwe, kuzoba nesinqamuleli esisha ku-DCON Utility kudeskithophu.
Ukusebenzisa I-DCON Utility Ukuqalisa I-tM-Series Module
I-tM-Series iyimojula ye-I/O esekelwe kuphrothokholi ye-DCON, okusho ukuthi ungasebenzisa i-DCON Utility ukuze uyiqalise kalula.
Isinyathelo 1: Qalisa I-DCON Utility
Isinyathelo sesi-2: Sebenzisa imbobo ye-COM1 ukuze uxhumane ne-tM-Series
Chofoza inketho ethi “COM Port” kumenyu futhi kuzovezwa ibhokisi lengxoxo elizokuvumela ukuthi usethe imingcele yokuxhumana njengoba kuchazwe kuthebula elingezansi.
Isinyathelo 3: Cinga imojuli ye-tM-Series
Isinyathelo sesi-4: Xhuma ku-tM-Series
Ngemva kokuchofoza igama lemojula ohlwini, ibhokisi lengxoxo lizovezwa. 
Isinyathelo sesi-5: Qalisa imojuli ye-tM-Series
Iqalisa kabusha i-tM-Series Module kuModi Ejwayelekile
Qiniseka ukuthi iswishi ye-INIT ibekwe endaweni "Ejwayelekile".
Ukuqala Ukusebenza Kwemojula
Ngemva kokuqalisa kabusha imojuli ye-tM-Series, sesha imojuli ukuze uqiniseke ukuthi izilungiselelo zishintshiwe. Ungakwazi ukuchofoza kabili egameni lemojuli ohlwini ukuze uvule ibhokisi lengxoxo yokumisa.
Imephu yekheli le-Modbus
| Ikheli | Incazelo | Isibaluli |
| 30001 ~ 30004 | Inani eliphikisayo lokokufaka kwedijithali | R |
| 40481 | Inguqulo ye-Firmware (igama eliphansi) | R |
| 40482 | Inguqulo ye-Firmware (igama eliphakeme) | R |
| 40483 | Igama lemojuli (igama eliphansi) | R |
| 40484 | Igama lemojuli (igama eliphakeme) | R |
| 40485 | Ikheli lemojuli, ububanzi obuvumelekile: 1 ~ 247 | R/W |
| 40486 | Iziqephu 5:0
Izinga le-Baud, ububanzi obuvumelekile: 3 ~ 10 Bits 7:6 00: akukho ukulingana, i-1 stop bit 01: akukho ukulingana, i-2 stop bit 10: ngisho nokulingana, i-1 stop bit 11: ukulingana okungajwayelekile, ibhithi eli-1 lokuma |
R/W |
| 40488 | Isikhathi sokulibaziseka kwempendulo ye-Modbus ku-ms, ububanzi obuvumelekile: 0 ~ 30 | R/W |
| 40489 | Inani lokuvala le-watchdog engusokhaya, 0 ~ 255, ngo-0.1s | R/W |
| 40492 | Isibalo sokuvala se-watchdog esisingethe, bhala u-0 ukuze usule | R/W |
| 10033 ~ 10036 | Inani lokufakwayo kwedijithali lesiteshi 0 ~ 3 | R |
| 10065 ~ 10068 | Inani eliphakeme kakhulu lama-DI | R |
| 10073 ~ 10076 | Amanani axhumene aphezulu we-DO | R |
| 10097 ~ 10100 | Amanani anele aphansi we-DI | R |
| 10105 ~ 10108 | Amanani anesheli aphansi we-DO | R |
| 00001 ~ 00004 | Inani eliphumayo ledijithali lesiteshi 0 ~ 3 | R/W |
| 00129 ~ 00132 | Inani eliphephile lesiteshi esiphumayo sedijithali 0 ~ 3 | R/W |
| 00161 ~ 00164 | Amandla enanini lesiteshi esiphumayo sedijithali 0 ~ 3 | R/W |
| 00193 ~ 00196 | I-counter update icupha unqenqema lwesiteshi 0 ~ 3 | R/W |
| 00513 ~ 00518 | Bhala oku-1 ukuze usule inani eliphikisayo lesiteshi 0 ~ 3 | W |
| 00257 | Ukukhetha iphrothokholi, 0: DCON, 1: Modbus | R/W |
| 00258 | 1: Modbus ASCII, 0: Modbus RTU | R/W |
| 00260 | Imodi yokubuka i-Modbus host watchdog 0: efanayo ne-I-7000
1: ingasebenzisa umyalo we-AO ne-DO ukusula umsingathi isimo sokuvala isikhathi se-watchdog |
R/W |
| Ikheli | Incazelo | Isibaluli |
| 00261 | 1: vumela, 0: khubaza inja yokubuka umsingathi | R/W |
| 00264 | Bhala oku-1 ukuze usule i-DIO exhunyiwe | W |
| 00265 | DI isimo sokusebenza, 0: evamile, 1: okuphambene | R/W |
| 00266 | YENZA isimo sokusebenza, 0: evamile, 1:okuphambene | R/W |
| 00270 | Isimo se-watchdog somsingathi, bhala oku-1 ukuze usule umsingathi
isimo sokuvala isikhathi se-watchdog |
R/W |
| 00273 | Setha kabusha isimo, 1: okokuqala kufundwe ngemva kokukhanyisa, 0: hhayi
ifundwe okokuqala ngemuva kokukhanyisa |
R |
Qaphela: Kumamojula e-tM DIO, amarejista e-Modbus aqala ku-00033 noma ku-10033 angasetshenziswa ukufunda amanani okufaka edijithali. Kumamojula we-M-7000 DIO, angu-00033 noma angu-10001.
Copyright © 2009 ICP DAS Co., Ltd. Wonke Amalungelo Agodliwe. *I-imeyili: service@icpdas.com
Amadokhumenti / Izinsiza
 |
I-ICPDAS tM-AD8C 8 Imojula Yokufaka Yamanje Ehlukanisiwe Yesiteshi [pdf] Umhlahlandlela Womsebenzisi tM-AD8C, 8 Isiteshi Esihlukanisiwe Imojula Yamanje Yokokufaka |
