I-BANNER DXMR90 Isilawuli Sokucubungula Umhlahlandlela Womsebenzisi Wenzwa Yomshini

Ingemuva kanye Nevelu

Izikhungo zezimboni zinamakhulu ezimpahla ezizungezayo ezibalulekile njengamamotho, amaphampu, ama-gearbox, nama-compressor. Ukwehluleka okungalindelekile kubangela ukwehla kwesikhathi esibizayo.

Isixazululo sokuvikela sokuvikela impilo yemishini (EHM) sisebenzisa ukufunda komshini ukuhlonza lapho izimpahla zeqa amapharamitha achazwe ngaphambilini, okuholela kulokhu:

• Ukwenyuka kwe-Uptime-Susa ukuvala okungahleliwe ngokuqhubekayo ngokugada izimpahla ezifika ku-40 ngohlelo olulodwa.
• Ukwehliswa Kwezindleko Zokulungisa ngaphambi kokwehluleka noma umonakalo omkhulu wokubambisa
• Ukulungiswa Okuphumelelayo/Uhlelo Lokuhlela Izingxenye lwabasebenzi kanye nezingxenye ezisele
• Ukusebenziseka Kalula-Yehlisa izindleko zokufaka futhi ususe inkimbinkimbi yokuhlaziywa kwedatha evamile
• Ukukhethwa Kwempahla Okuthuthukisiwe-Sebenzisa idatha ukuze uhlaziye imbangela nokuthembeka
• I-IIOT-Review izexwayiso zesikhathi sangempela zokwenza izinqumo ezingcono nokuphathwa kwempahla okukude

I-VIBE-IQ® Nge-Banner Engineering Corp:

• Iqapha injini ngayinye isebenzisa i-algorithm yokufunda yomshini ukuze ifinyelele amanani ayisisekelo futhi isethe imikhawulo yokulawula yezaziso ezinokusebenzisana okulinganiselwe komsebenzisi
• Ihlala iqapha i-RMS Velocity (10-1000Hz), i-RMS high-frequency Acceleration (1000-4000Hz), kanye nezinga lokushisa ezintweni ezijikelezayo kusetshenziswa inzwa ye-Banner's Wireless vibration/temperature.
• Inquma ukuthi izinjini ziyasebenza noma cha futhi isebenzisa kuphela idatha esebenzayo ukwenza isisekelo kanye nokuxwayisa
• Iqoqa idatha yokuthrendayo nokuhlaziya; iskripthi sichaza izinkinga ezinzima nezingamahlalakhona
• Ithumela idatha nezixwayiso kusilawuli somsingathi noma efwini ukuze kuxhunywe i-lloT

Lesi sixazululo sesibhengezo siqapha amazinga okudlidliza ezimpahleni ezizungezisayo eziwumphumela:

• Impahla engalingani/engalungiswanga kahle
• Izingxenye ezixekethile noma zowesifazane
• Izingxenye ezingashayelwa kahle noma ezikhweziwe
• Izimo ezishisa kakhulu
• Ukwehluleka ukuzala kwangaphambi kwesikhathi

Izici zohlelo lokusebenza kanye nezinzuzo

Ukuqapha Ukudlidliza Okuqhubekayo	Gada idatha yokudlidliza kumafa afinyelela kwangu-40 azwa i-X kanye ne-axis ye-Z ye-RMS Velocity kanye nemvamisa ephezulu ye-RMS Acceleration RMS Velocity ikhombisa impilo yomshini ojikelezayo ojwayelekile (ukungalingani, ukungahambi kahle, ukuxega) kanye nemvamisa ephezulu ye-RMS Ukusheshisa kuyinkomba yokuguga ngaphambi kwesikhathi.
Isisekelo Sokuzenzela kanye neThreshold	Vimbela abasebenzisi ukuthi bakhiqize izisekelo noma ama-alamu ngokusebenzisa ama-algorithms okufunda komshini ukuze bakhe ukufundwa kwesisekelo sokuqala kanye nemikhawulo yesexwayiso/ye-alamu yemoto ngayinye ngayodwana.
Ama-alamu Acute futhi Angalapheki	Ama-alamu kanye ne-Waning kukhiqizwa kuzo zombili izimo ezibucayi nezingamahlalakhona kunjini ngayinye. I-acute threshold ikhombisa isimo sesikhashana esifana ne-motor jam noma indawo yokudayisa ewela umkhawulo ngokushesha. Ama-threshold ahlala njalo asebenzisa isilinganiso samahora amaningi esinyakazayo sesignali yokudlidliza ukuze abonise isimo sesikhathi eside esifana nebhere yokugqokwa/ewayo noma injini.
Ama-alamu Okushisa	Inzwa ngayinye yokudlidliza izophinde ihlole izinga lokushisa futhi ithumele i-alamu lapho umkhawulo weqiwe.
Idatha Ethuthukisiwe	Idatha yokuxilonga ethuthukisiwe eyengeziwe iyatholakala njengedatha yeSpectral Band Velocity, Peak Velocity, Kurtosis, Crest factor, Peak Acceleration, njll.
Umbhalo we-SMS kanye nezaziso ze-imeyili	Ikhiqiza izexwayiso ze-imeyili ezisuselwe kuma-mingings angawodwana kanye/noma ama-alamu lapho esetshenziswa namasevisi wedatha yesibhengezo samafu.
I-Cloud Moni izokhala	Phusha idatha ku-Cloud Webiseva noma i-PLC nge-LAN yesilawuli kude view, ukuxwayisa, nokugawulwa kwemithi.

Izingxenye Zesixazululo

Imodeli	Incazelo
I-QM30VT2	Ukudlidliza kwesibhengezo kanye nenzwa yezinga lokushisa enokuxhumana kwe-RS-485
I-DXMR90-X1	Isilawuli sezimboni esinamachweba amane e-Modbus

Lo mhlahlandlela ubonisa ukuthi uzifaka kanjani izinzwa, uzixhume kusilawuli sakho, futhi ulayishe i-XML emiswe ngaphambilini file kanye nombhalo wezinzwa zokudlidliza ezingafika kwezingama-40. I-XML file idinga kuphela izinguquko ezincane ukuthi zenziwe ngendlela oyifisayo kunoma iyiphi isayithi.

Izinketho zokukhweza

Izinketho zokukhweza ezilandelayo zifakwe kuhlu kusukela kokungasebenzi kahle kakhulu kuye kokusebenza kakhulu. Kuzo zonke izinketho zokukhweza, qiniseka ukuthi akukho ukunyakaza kwenzwa ngoba lokhu kubangela ulwazi olungalungile noma izinguquko kudatha ethrendayo isikhathi.

Landela Umhlahlandlela Wokufakwa Kwenzwa Yesibhengezo (p/n b_4471486) ukuze uthole usizo olufanele lokufakwa kwenzwa.

Imodeli	Ubakaki	Incazelo Yohlelo Lokusebenza
I-BWA-QM30-FMSS Inzwa yenzwa yezibuthe eziyisicaba		Iguquguquka kakhulu futhi isebenziseka kabusha, isikhwezi sikazibuthe esiyisicaba sezindawo ezinobubanzi obukhudlwana noma izindawo eziyisicaba.
I-BWA-QM30-CMAL Ibakaki kazibuthe engaphezulu egobile		Izikhwebu zikazibuthe zangaphezulu ezigobile zifaneleka kangcono ezindaweni ezincane ezigobile. Qinisekisa ukuthi ubeke inzwa endaweni efanele ukuze uthole ukukhweza okuqine kakhulu. Inikeza ukuguquguquka kokubekwa kwenzwa kwesikhathi esizayo.
Ubakaki wokukhweza we-BWA-QM30-F TAL Center, 1/4-28 x 1/2-inch screw mount (imikhumbi enenzwa)		Abakaki abayisicaba bafakwe epoxini unomphela emoteni futhi inzwa iboshelwe kubakaki (isebenza kahle kakhulu) noma ubakaki oyisicaba uboshelwe kumotho nenzwa (imast isebenza kahle). Iqinisekisa ukunemba kwenzwa okungcono kakhulu kanye nokuphendula kwemvamisa. Ncoma i-epoxy eyenzelwe ukukhwezwa kwe-accelerometer: I-Loctite Depend 330 kanye ne-activator engu-7388
I-BWA-QM30CAB-MAG		Ubakaki wokuphatha ikhebula
I-BWA-QM30-CEAL		Abakaki be-aluminium abanophawu bezindawo ezigobile ezifakwe i-epoxied unomphela ku-mator kanye nenzwa efakwe kubakaki.
I-BWA-QM30-FSSSR		Indawo eyisicaba yokukhulula ubakaki wensimbi engenasici; isikulufa esinesikulufu esimaphakathi sokukhweza ubakaki kumotho kanye nesikulufu esiseceleni sokukhweza ukukhululwa okusheshayo kwenzwa kubakaki.
I-BWA-QM30-FSALR		Ubakaki we-aluminium okhishwa ngokushesha oyisicaba; isiyingi esinesikulufu esimaphakathi sokukhweza ubakaki kumotho kanye nesikulufu esiseceleni sokukhweza okuphuma ngokushesha kwenzwa kubakaki.

Imiyalo Yokuhlela

Landela lezi zinyathelo eziyisisekelo ukuze ulungiselele isistimu yakho.

1. Layisha ukucushwa files (bona “Layisha ukucushwa Files” ekhasini 3).
2. Setha i-ID yenzwa (bheka “Setha i-ID Yenzwa” ekhasini 3).
3. Faka inzwa yokudlidliza (bona “Faka inzwa yokudlidliza” ekhasini 4).
4. Enza ngendlela oyifisayo i-XML file (bona "Yenza ngendlela oyifisayo i-XML File” ekhasini 4). Lesi isinyathelo sokuzikhethela esincike ezidingweni zakho zenethiwekhi.
5. Setha uxhumano lwe-Ethernet (bheka “Setha Uxhumano Lwe-Ethernet” ekhasini 5).
   Qinisekisa ukuthi i-Cloud Push Interval yakho isethelwe kokuthi Lutho.
6. Vula izinzwa kumarejista endawo (bona “Vula Izinzwa Kurejista Yasendaweni” ekhasini 5).
7. Londoloza futhi ulayishe ukucushwa file (bona “Londoloza futhi Ulayishe Ukucushwa File” ekhasini 6).
8. Lungiselela i-akhawunti ye-BannerCDS (bheka “Push Information to BannerCDS” ekhasini 6).

Layisha Ukucushwa Files

Ukuze wenze ngokwezifiso isistimu ibe kuhlelo lokusebenza lwangempela, yenza izinguquko eziyisisekelo kusifanekiso files. Zimbili fileilayishwe ku-DXM:

• I-XML file isetha ukucushwa kokuqala kwe-DXM
• I-Script Basic file ifunda idatha yokudlidliza, isetha imingcele yezixwayiso nama-alamu, futhi ihlele imininingwane ngamarejista anengqondo futhi atholakala kalula ku-DXм

Ukuze ulayishe futhi ulungise lezi files, sebenzisa i-Banner's DXM Configuration Software (inguqulo 4 noma entsha) kanye ne-Vibration Monitoring files iyatholakala ngezixhumanisi ezingezansi.

1. Qinisekisa ukuthi uyibophile imisakazo, wenze inhlolovo yesayithi, futhi usethe ama-ID wezinzwa.
2. Faka izinzwa.
   Izinzwa ziqala ngokuzenzakalelayo ukwenziwa kwesisekelo ngemva kokufakwa nokuxhunywa ku-DXM. Gwema ukudlidliza okungahlobene ekufakweni ngemva kokulayisha ukumisa file.
3. Landa okulungiselelwe ngaphambilini files kusuka ekhasini lochungechunge lwe-DXMR90 noma ikhasi lochungechunge lwenzwa ye-QM30VT ku www.bannerengineering.com.
4. Khipha i-ZIP files kufolda kukhompyutha yakho. Qaphela indawo lapho i- files zasindiswa.
5. Xhuma i-DXM, ngekhebula le-USB elinikezwe i-DXM noma ikhebula le-ethernet, kwikhompyutha equkethe i-DXM Configuration Software noma landa isofthiwe bese uyifake kukhompyutha.
6. Yethula isofthiwe bese ukhetha imodeli ye-DXM efanele.
7. Ku-DXM Configuration Software: Iya ku File, Vula bese ukhetha i-R90 VIBE-IQ XML file.
8. Xhuma isofthiwe ku-DXM.
   • a. Iya kokuthi Idivayisi, Izilungiselelo Zokuxhuma.
   • b. Khetha i-TCP/IP.
   • c. Faka ikheli le-IP elilungile le-DXM.
   • d. Chofoza Xhuma.
9. Iya kokuthi Izilungiselelo> Isikrini Sokubhala bese uchofoza Layisha file. Khetha iskripthi se-DXMR90 VIBE-IQ file (.sb).
10. Iya ku File > Gcina ukuze ugcine i-XML file. Londoloza i-XML file nganoma yisiphi isikhathi i-XML ishintshiwe. I-DXM Configuration Software AYIGCINI ngokuzenzakalelayo.

Setha i-ID yenzwa

Ngaphambi kokumisa izinzwa, inzwa ngayinye kufanele ibe ne-ID ye-Modbus eyabelwe yona. Ama-ID e-Modbus ezinzwa kufanele abe phakathi koku-1 nokungu-40.

I-ID yenzwa ngayinye ihambisana nezinombolo zenzwa ngayinye kumarejista e-DXM. Ama-ID ezinzwa akudingeki anikezwe ngokulandelana kodwa Isibhengezo sincoma ukuthi unikeze izinzwa zakho ngokulandelana okuphambene, kuqalwe ngenzwa yokugcina ohlelweni lwakho.

Ukuze unikeze ama-ID enzwa nge-DXM Configuration Software, landela lezi zinyathelo.

1. Faka amandla kusilawuli se-DXMR90 futhi uxhume kunethiwekhi yakho ye-Ethernet.
2. Xhuma inzwa yakho ye-QM30VT2 kutheku 1 lesilawuli se-DXMR90
3. Kukhompyutha yakho, vula i-DXM Configuration Software bese ukhetha i-DXMR90x ohlwini lokudonsela phansi lwemodeli.
4. Skena inethiwekhi yakho ukuze uthole ama-DXM futhi uhlonze ikheli le-IP le-DXMR90 yakho. Chofoza Xhuma.
   Uma ufaka i-DXMR90 esethiwe njengasekuqaleni, i-DXM kufanele ibe nekheli le-IP elingaguquki elingu-192.168.0.1. Ungase udinge ukuxhuma ikhompyutha yakho ngokuqondile ku-DXMR90 ukuze ulungiselele i-DHCP ngaphambi kokuqhubeka.
5. Ngemva kokuxhuma ku-DXMR90, iya kokuthi Amathuluzi > Bhalisa View isikrini.
6. Esigabeni esithi Funda/Bhala Umthombo kanye Nefomethi, khetha okulandelayo:
   • Umthombo wokubhalisa: Idivayisi Ekude
   • Imbobo: 1 (noma imbobo inzwa yakho exhunywe kuyo)
   • I-ID yeseva: 1
     I-ID ye-Modbus 1 iyi-ID ezenzakalelayo yasembonini ye-QM30VT2. Uma ngabe inzwa yakho isivele ikhulunywe kabusha esikhathini esidlule, sicela ufake ikheli elisha ngaphansi kwe-ID Yeseva. Uma ungayazi i-ID futhi ungayitholi ngaphansi kokungu-1, sebenzisa isofthiwe yokumisa Inzwa ngokuqondile nenzwa.
     
7. Sebenzisa isigaba esithi Funda Amarejista ukuze ufunde Irejista 6103 yenzwa. I-Register 6103 kufanele iqukathe u-1 ngokuzenzakalelayo.
8. Sebenzisa ingxenye ethi Bhala Amarejista ukuze ushintshe i-ID Yezinzwa. Isibhengezo sincoma ukuthi uqale ngenzwa yokugcina kusistimu yakho bese ubuyela emuva ku-1.

Ukuze unikeze i-ID yesigqila senzwa usebenzisa I-Sensor Configuration Software: Sebenzisa I-Sensor Configuration Software kanye nesesekeli sekhebula le-BWA-UCT-900 ukuze uxhume inzwa ye-VT2 kukhompyutha. Landela imiyalelo eku-Sensor Configuration Software Instruction Manual (p/n 170002) ukuze unikeze i-ID ye-Modbus yenzwa enanini eliphakathi kuka-1 kuya ku-40.

Faka inzwa yokudlidliza

Ukukhweza kahle inzwa yokudlidliza emoteni kubalulekile ukuze uqoqe ukufundwa okunembe kakhulu. Kukhona okucatshangelwayo uma kuziwa ekufakeni inzwa.

1. Qondanisa ama-x-and z-axes wenzwa yokudlidliza. Izinzwa zokudlidliza zinenkomba ye-x- and z-eksisi ebusweni benzwa. I-z-eksisi ihamba ngendiza ngenzwa ngenkathi i-xaxis ihamba ngokuvundlile. Inzwa ingafakwa isicaba noma iqonde phezulu.
   • Ukufakwa okuyisicaba-Qondanisa i-x-eksisi ngokuhambisana ne-motor shaft noma i-axially futhi i-axis engu-z ingena/ngenjini.
   • Ukufakwa okuqondile-Qondanisa i-axis ka-z ukuze ihambisane ne-motor shaft futhi i-x-eksisi ime nge-orthogonally ku-shaft.
2. Faka inzwa eduze nokuthwala injini ngangokunokwenzeka.

Ukusebenzisa i-cover shroud noma indawo ekude ne-bearing kungase kubangele ukunemba okuncishisiwe noma ikhono lokubona izici ezithile zokudlidliza.

Uhlobo lokukhweza lungathinta imiphumela yenzwa.

Ukufingqa ngokuqondile noma ukufaka i-epoxying ubakaki kumotho kunikeza ukufakwa unomphela kobakaki lapho inzwa engaxhunywa khona. Lesi sixazululo sokukhweza esiqine kakhudlwana siqinisekisa ukunemba kwenzwa okungcono kakhulu kanye nokusabela kwemvamisa, kodwa asikwazi ukuguquguquka ukuze kulungiswe okuzayo.

Izibuthe zisebenza kancane kancane kodwa zinikeza ukuguquguquka okwengeziwe kokulungiswa okuzayo nokufakwa ngokushesha. Izigitsheli zikazibuthe zisengozini yokuphenduka ngephutha noma ziguquke endaweni yenzwa uma amandla angaphandle agingqika noma anyakazisa inzwa. Lokhu kungaholela oshintshweni kulwazi lwenzwa oluhlukile kudatha ethrendayo yesikhathi endaweni eyigugu.

Enza ngendlela oyifisayo i-XML File

Lesi isinyathelo sokulungiselela ongasikhetha.

1. Ngaphakathi kwesofthiwe yokumisa, hamba ku-Irejista Yendawo> Ukubhaliswa Kwasendaweni Ekusetshenzisweni kwesikrini.
2. Qamba kabusha amarejista wempahla egadiwe.
   • a. Esikrinini esithi Amarejista endawo> Amarejista endawo kokuthi Sebenzisa, ukuze uye engxenyeni ethi Hlela Bhalisa eduze naphansi kwesikrini.
   • b. Esigabeni Segama, faka igama lerejista lempahla yakho egadiwe.
   • c. Ngoba kunamarejista amahlanu ngempahla ngayinye egadiwe, kopisha futhi unamathisele amagama ukuze usebenze kahle. (N1 = I-ID Yenzwa 11, N2 = I-ID Yenzwa 12, … N40 = I-ID Yenzwa 50).
3. Ukubonisa idatha yokudlidliza kwemoto, izexwayiso, nama-alamu ku-CDS yesibhengezo webkusayithi, shintsha izilungiselelo Zefu zibe Funda kulwazi ngalunye olugadwayo lwe-assefs (isivinini, ukusheshisa, imaski yesixwayiso, njll.) ongathanda ukuvela kuyo webindawo.
   
4. Amarejista avame ukuthunyelwa efwini asevele anezimvume zawo zamafu asethiwe. Ukuze uthumele amarejista engeziwe noma unciphise inani lamarejista athunyelwayo uma usebenzisa izinzwa ezingaphansi kuka-40, shintsha izimvume zamafu.
   • a. Esikrinini esithi Guqula Amarejista amaningi, khetha okuthi Setha ohlwini lokudonsela phansi eduze kwezilungiselelo zefu.
   • b. Kokudonsela phansi kwezilungiselelo zamafu, khetha Funda noma Lutho ukuze uvale irejista.
   • c. Setha Irejista Yokuqalisa kanye Nerejista Yokugcina yeqembu lamarejista adinga ukushintshwa.
   • d. Chofoza okuthi Guqula Amarejista ukuze uqedele ukuguqulwa.

Izimvume ezijwayelekile zamafu zerejista ziboniswa kuthebula le-Local Registers ekupheleni kwale dokhumenti.

Setha uxhumano lwe-Ethernet

I-DXMR90 yakhelwe ukuphusha idatha ku-a webiseva ngokusebenzisa i-Ethernet push. Landela lezi zinyathelo ukuze usethe uxhumano lwe-Ethernet kumasevisi wamafu.

1. Esikrinini Sokubhaliswa Kwasendaweni Ekusetshenzisweni, setha Uhlobo Lwenani lerejista 844 ukuze libe Constant kanye nenani elingu-1 ukuze unike amandla ukuphusha kwedatha.
2. Uma i-DXM izophushela efwini webiseva, setha i-push interface.
   • a. Iya kokuthi Izilungiselelo > Isikrini samasevisi wamafu.
   • b. Kusuka ohlwini lokudonsela phansi lwe-Network Interface, khetha i-Ethernet.
3. Setha i-Cloud Push Interval kokuthi Lutho
   Iskripthi esihlobene nalokhu file ichaza i-push interval yemizuzu emihlanu ngaphakathi ukuze yenzeke ngokushesha ngemva kwe-sampizinzwa. Uma uchaza ne-Cloud Push Interval lapha futhi, uzobe ucindezela ulwazi oluningi kakhulu ku-akhawunti yakho.

Vula izinzwa kumarejista wendawo

Ukuze uvule izinzwa, setha amarejista we-Node Select (7881-7920) kuNombolo Yembobo ye-DXMR90 yenzwa. Ngokuzenzakalelayo, inzwa 1 kuphela (ID 1) isethelwe koku-1 ukuze igweme ukuphela kwesikhathi eside kwamanye amasistimu angekho ohlelweni. Ukusetha irejista ibuyele kokuthi 0 kutshela isistimu ukuthi inzwa IVALIWE futhi idatha ngeke iqoqwe.

Okwesiboneloample, uma unezinzwa ezinhlanu ezixhunywe ku-port 1 ye-DXMR90 nezinzwa ezinhlanu ezixhunywe ku-port 2 ye-DXMR90, setha amarejista 7881-7885 ukuya ku-1 bese ubhalisa 7886-7890 ukuya ku-2. Misa wonke amanye amarejista abe ngu-0 ukuze ubonise lezo zinzwa azisetshenziswa ohlelweni.

Lawa marejista aphinde akhombise kuhlelo lokusebenza lwe-Vibe-IQ ukuthi iyiphi idatha yenzwa okufanele iphushelwe efwini le-BannerCDS. Uhlelo lokusebenza lusebenzisa ukuphusha kweqembu ukuze kwandiswe umkhawulokudonsa futhi ugweme ukusunduza amarejista angenalutho kuzinzwa ezingasetshenzisiwe ohlelweni. Ngenxa yemikhawulo yokubhalisa, izinzwa 31-35 kanye ne-36-40 ziqoqwe. Uma unezinzwa ezingu-36, uzophusha amarejista kuwo wonke angu-40. Uhlelo lokusebenza lwe-Banner CDS ngokuzenzakalelayo
ifihla amarejista angenalutho. Amarejista angabhalelwa ku-PLC.

Phinda lezi zinyathelo noma nini lapho inzwa yengezwa noma ikhishwa ohlelweni.

1. Ngemva kokuqalisa kabusha i-DXM, linda umzuzu owodwa kuya kwemibili.
2. Kusuka ku-DXM Configuration Software: Iya kokuthi Amathuluzi > Bhalisa View isikrini.
3. Esigabeni esithi Bhala Amarejista, setha irejista yokuqala enanini eliphakathi kuka-7881 no-7920 ukuze uvule izinzwa ezisetshenziswa ohlelweni.
   Setha Inombolo Yamarejista ibe ngu-40 ukuze uwabone wonke ngesikhathi esisodwa.
4. Faka u-0 ukuze uvale inzwa bese ufaka inombolo yembobo ye-DXMR90 yenzwa (1, 2, 3, noma 4) ukuze uyivule.
5. Chofoza u-Bhala amarejista ukuze ubhale izinguquko zakho ku-DXM.

Londoloza futhi Ulayishe Ukucushwa File

Ngemva kokwenza noma yiziphi izinguquko ekucushweni, kufanele ulondoloze ukucushwa files kukhompuyutha yakho, bese uyilayisha kudivayisi.

Izinguquko ku-XML file azilondolozwa ngokuzenzakalelayo. Londoloza ukumisa kwakho file ngaphambi kokuphuma ethuluzini nangaphambi kokuthumela i-XML file kudivayisi ukuze ugweme ukulahlekelwa idatha. Uma ukhetha i-DXM > Thumela Ukucushwa kwe-XML ku-DXM ngaphambi kokugcina ukumisa file, isofthiwe izokutshela ukuthi ukhethe phakathi kokulondoloza ifayela le file noma ukuqhubeka ngaphandle kokulondoloza ifayela file.

1. Londoloza ukucushwa kwe-XML file ku-hard drive yakho ngokuya ku- File, Gcina Njengemenyu.
2. Iya ku-DXM > Thumela Ukucushwa kwe-XML kumenyu ye-DXM.
   
   • Uma inkomba Yesimo Sohlelo Lokusebenza sibomvu, vala bese uqala kabusha Ithuluzi Lokucupha le-DXM, khipha bese uxhuma kabusha ikhebula bese uxhuma kabusha i-DXM kusofthiwe.
   • Uma inkomba Yesimo Sesicelo siluhlaza, i file ukulayisha kuqediwe.
   • Uma inkomba Yesimo Sohlelo Lokusebenza simpunga futhi ibha yesimo esiluhlaza isanyakaza, i file ukudlulisa kuyaqhubeka.

Ngemva kwe file ukudlulisa kuqediwe, idivayisi iqalisa kabusha futhi iqala ukusebenzisa ukucushwa okusha.

Phusha Ulwazi ku-BannerCDS

I-DXMR90 ingaxhuma ku- Web nge-Ethernet noma ngemojula yeseli yangaphakathi. Isilawuli siphusha idatha esuka ku-DXMR90 ukuze igcinwe futhi iboniswe ku- webindawo.

Inkundla yesibhengezo yokugcina nokuqapha idatha yesistimu iyi https://bannercds.com. I-Banner Cloud Data Services webisayithi ikhiqiza ngokuzenzakalelayo okuqukethwe kwedeshibhodi yohlelo lokusebenza olugcwaliswe Kudeshibhodi. Izaziso ze-imeyili zingalungiselelwa kusetshenziswa isikrini sama-alamu.

Ukuze uphushele idatha efwini, shintsha irejista 844 iye koyedwa (1).

Ukuze uthole ulwazi olwengeziwe ngokudala ama-akhawunti nokusebenzisa uhlelo lwe-Banner Cloud Data Services (CDS), sicela ubheke Umhlahlandlela Wokuqala Okusheshayo we-Banner CDS (p/n 201126).

Dala Isango Elisha

Ngemva kokungena ku-Banner Cloud Data Services webindawo, i-Overview izibonisi zesikrini. Landela lezi zinyathelo ukuze udale isayithi elisha lokuqapha.

1. Chofoza ku-New Gateway (ekhoneni eliphezulu kwesokudla kwe-Overview isikrini).
   Dala Isango elisha lesilawuli se-DXM ngasinye esithumela idatha ku- web iseva.
   Kuvela umyalo omusha wesango.
2. Qinisekisa Ngokwendabuko kukhethelwe Uhlobo Lwesango.
3. Faka Igama Lesango.
4. Khetha Inkampani ohlwini lokudonsela phansi.
5. Kopisha inombolo ye-Gateway ID etholakala ngaphakathi kwewindi lokwaziswa ebhodini lokunamathisela lekhompyutha yakho.
   Inombolo ye-Gateway ID edalwe ngu- web iseva iyipharamitha edingekayo ekucushweni kwe-DXM. I-Gateway ID ikheli webiseva isebenzisa ukugcina idatha ephushwe isuka ku-DXM.
6. Chofoza Hambisa ukuze uvale iwindi lokwaziswa

Lungiselela i-DXM ukuze Iphushe Ulwazi Kumafu

KUBALULEKILE: Yenza ungalungisi i-Cloud Push Interval. I-push frequency ilawulwa iskripthi. Ukulungisa isikhawu sohlelo lwamafu ngalokhu kulungiselelwa kungase kubangele amanani eqile edatha aphushwe ku-Banner CDS.

1. Ngaphakathi kwe-DXM Configuration Software, iya esikrinini se-Local Registers in Use.
2. Setha Uhlobo Lwenani lwerejista 844 ukuze lube Njalo kanye nenani elingu-1 ukuze unike amandla ukuphusha kwedatha.
3. Iya kokuthi Izilungiselelo, isikrini se-Cloud Services.
4. Setha igama leseva/IP ukuze push.bannercds.com.
5. Kwe Web Ingxenye yeseva, namathisela i-Gateway ID ekopishwe kusikrini sokumisa i-BannerCDS endaweni efanele.
6. Sebenzisa i- File > Gcina imenyu ukuze ulondoloze i-XML file ku-hard drive yakho.
7. Thumela i-XML ebuyekeziwe kusilawuli se-DXM usebenzisa i-DXM, Thumela Ukucushwa kwe-XML kumenyu ye-DXM.

Layisha Ukucushwa kwe-XML File kwe Webindawo

Ukuze ulayishe ukucushwa kwe-XML file kwe website, landela le miyalo.

1. Ku-BannerCDS webindawo, khetha Amasango On the Overview isikrini.
2. Kumugqa obonisa Isango lakho, chofoza Imininingwane ngaphansi View.
3. Khetha Hlela Isango.
   Kuvela umyalo we-edit Gateway.
4. Chofoza okuthi Khetha File ngaphansi kwe-Buyekeza i-XML.
5. Khetha i- file okusanda kubuyekezwa ku-DXM bese uchofoza okuthi Vula.
   Ngemuva kwe-XML file ilayishwa ku webiseva, i webiseva isebenzisa amagama erejista kanye nezilungiselelo ezichazwe ekucushweni file. Ukucushwa okufanayo kwe-XML file manje ilayishwe kukho kokubili i-DXM ne- Webindawo. Ngemva kwesikhathi esithile, idatha kufanele ibonakale ku webindawo.
6. Kuya view idatha evela esikrinini se-Gateway, chofoza isixhumanisi Semininingwane sesango ngalinye.
   Isikrini Semininingwane Yesango sibonisa izinto zenzwa kanye nama-alamu azenzakalelayo alelo sango. Ungakwazi view imininingwane yerejista yomuntu ngamunye ngokukhetha Amarejista.

Ukugcwalisa lezi zinyathelo kudala ukuqhubeka phakathi kwe-Gateway edalwe ku- webindawo ene-DXM esetshenziswa ensimini. I-DXM iphusha idatha ku- webindawo, okungaba viewed nganoma yisiphi isikhathi.

Ulwazi Olwengeziwe

Ukwakhiwa kweMoto

Umbhalo ofakwe kulo mhlahlandlela usebenzisa amaphoyinti edatha okuqala angama-300 (umsebenzisi angalungiseka ngokushintsha irejista engu-852) yenjini ukuze kukhiqizwe isisekelo kanye nezibalo zokunquma amaleveli omkhawulo wesixwayiso nama-alamu.

Dala isisekelo esisha lapho kwenziwa izinguquko eziphawulekayo kumotho noma inzwa yokudlidliza, okuhlanganisa ukwenza ukunakekelwa okukhulu, ukuhambisa inzwa, ukufakwa kwenjini entsha, njll. Lokhu kuqinisekisa ukuthi isistimu isebenza ngokunembe ngangokunokwenzeka. Ukusetha kabusha injini kungenziwa ku-DXM Configuration Software, kusukela ku-Banner CDS webisayithi, noma kusistimu yokusingatha exhunyiwe.

Isisekelo seMotor Esebenzisa I-DXM Configuration Software

1. Iya kokuthi Ukubhaliswa Kwasendaweni > Ukubhaliswa Kwasendaweni kokuthi Sebenzisa isikrini.
2. Sebenzisa imicibisholo ukuze ukhethe Amarejista.
   Amarejista alebulwe ngokuthi NX_ Isisekelo (lapho u-X kuyinombolo yenzwa ofuna ukuyenza isisekelo).
3. Khetha irejista efanele ukuze usethe kabusha bese uchofoza u-Enter.
4. Shintsha inani libe ngu-1, bese uchofoza u-Enter izikhathi ezintathu.
   Inani lerejista yokusetha kabusha libuyela ngokuzenzakalelayo kuqanda ngemva kokuqedwa kwesisekelo.

Isisekelo se-Motor evela ku-Banner CDS Webindawo

1. Esikrinini Sedeshibhodi, khetha Ideshibhodi efanelekile eyadalelwa ngokuzenzakalelayo isango lakho
2. Ngaphakathi Kwedeshibhodi, chofoza isithonjana semoto esifanele sempahla ongathanda ukulenza isisekelo.
3. Chofoza View Into engaphakathi kokwaziswa okuvelayo.
4. Skrolela phansi ngaphakathi kwethreyi evela ezansi kwesikrini, bese uchofoza inkinobho yokuqala ukuze VULIWE.
   Lokhu kuvala ngokuzenzakalelayo ngemva kokuqedwa kwesisekelo.
5. Phinda lezi zinyathelo ngenzwa ngayinye edinga ukusekelwa.

Isisekelo Semoto Ephuma Kuhlelo Lokubamba Oluxhunyiwe
Exampamasistimu wokusingathwa angaba yi-PLC noma i-HMI.

1. Thola inombolo yenzwa engu-X, lapho u-X kuyinombolo yenzwa engu-1-40 (i-ID yenzwa engu-11-50) ezophinde isekelwe.
2. Bhala inani elingu-1 ukuze ubhalise 320 + X.

Isimo Soxhumano Lwenzwa 

Uhlelo lulandelela isimo sokuxhuma senzwa. Uma inzwa iphelelwa yisikhathi, inzwa ifakwa esimweni esithi "iphutha lesimo" futhi ihlolwa kanye kuphela emahoreni amane kuze kube yilapho uhlelo luthola ukufundwa okuhle ngesikhathi esisodwa samahora amane.

Inzwa ingaba nephutha lesimo uma isignali yomsakazo inciphile futhi idinga ukulungiswa noma uma umthombo wamandla omsakazo wehlulekile (njengokudinga ibhethri elisha). Ngemuva kokuthi udaba selulungisiwe, thumela u-1 kuRejista Yendawo Yokutholwa Kwenzwa ukuze uphoqelele isistimu ukuthi ihlole zonke izinzwa ezikusistimu. Uhlelo ngokushesha luhlola zonke izinzwa ngaphandle kokulinda isikhawu esilandelayo samahora amane. Amarejista okuthola isimo nokutholwa kwezinzwa yilawa:

• Isimo Sokuxhuma Inzwa-Amarejista wendawo 281 kuya ku-320
• Ukutholwa Kwenzwa-Irejista Yendawo 832 (ishintsha ibe ngu-0 uma isiqediwe, kodwa ingathatha imizuzwana eyi-10 kuye kwengama-20)

Viewing Run Flags Isixazululo sokuqapha ukudlidliza siphinde silandelele lapho injini isebenza. Lesi sici singasebenzisa imithetho yesenzo eyengeziwe ukulandelela ukubala kokuvula/ukuvala noma cishe isikhathi sokusebenza kwemoto. Kuya view lolu lwazi ku- web, shintsha ukubika kwamafu nezimvume.

Amarejista alandelayo asetshenziswa ukukhombisa uma njengeampi-le inqume ukuthi injini ibisebenza noma cha.

• I-Motor Run Flag On/off (0/1)-Amarejista Asendaweni 241 kuya ku-280

Ukushintsha i-Sample Rate
I-DXMR90 iyisixazululo esinezintambo esingasekela ama-s asheshayoampamazinga we-ling kunesixazululo esingenantambo. Okuzenzakalelayo sampisilinganiso sesixazululo se-R90 imizuzwana engama-300 (imizuzu emi-5). I-sample rate ilawulwa yirejista 857. Ukuze uthole ukusebenza okuhle kakhulu:

• Ungabeki u-sample isilinganiso esingaphansi kwamasekhondi angu-5, kungakhathaliseki ukuthi zimbalwa kangakanani izinzwa kunethiwekhi yakho.
• Setha i-s yakhoample rate imizuzwana emibili ngenzwa ngayinye ohlelweni lwakho, kufika kumasekhondi angu-35 noma izinzwa ezingu-15.
• Kuzinzwa ezingaphezu kuka-15, sebenzisa ubuncane bemizuzwana engama-35ampisilinganiso.

Idatha Yokuxilonga Ethuthukile

Uhlelo lokuqapha i-MultiHop Vibration luhlanganisa ukufinyelela kudatha eyengeziwe yokuxilonga ethuthukisiwe etholakalayo engatholakali ohlelweni lomsakazo we-Performance. Izici ezingeziwe zisekelwe kumabhendi amabili amafrikhwensi amakhulu asuka ku-10 Hz kuye ku-1000 Hz kanye no-1000 Hz kuya ku-4000 Hz futhi afaka i-Peak Acceleration (1000-4000 Hz), I-Peak Velocity Frequency Component(10-1000 Hz), i-RMS Low Frequency.
Ukusheshisa(10-1000 Hz), i-Kurtosis (1000-4000 Hz) kanye ne-Crest Factor (1000-4000 Hz).

Kukhona izici ezinhlanu ezengeziwe ezivela ku-eksisi ngayinye yenani lamarejista ayi-10 ingqikithi yenzwa ngayinye. Le datha itholakala kumarejista 6141- 6540 njengoba kukhonjisiwe ku- “Amarejista Asendaweni” ekhasini 10.

Ngokungeziwe kumarejista ebhendi amakhulu engeziwe ngenhla, isistimu ingase iqoqe idatha ye-Spectral Band: I-RMS Velocity, i-Peak Velocity, nezingxenye ze-Velocity Peak Frequency ezivela kubhendi ngayinye kwamathathu akhiqizwa Kokufaka Isivinini. Amabhendi amathathu aphakathi nendawo azungeze isivinini esingu-1x, 2x, kanye ne-3x-10x afakwe nge-Hz ku-DXM Local Registers 6581-6620 (irejista eyodwa yenzwa ngayinye). QAPHELA: Isivinini asikwazi ukufakwa ngokushesha kunokukodwa ngehora kulawa marejista.

Kuya view idatha yeSpectral Band, nika amandla irejista 857 (shintsha inani ukusuka ku-0 kuye ku-1) bese view amarejista-amaphuzu antantayo 1001-2440 (amarejista angama-36 inzwa ngayinye). Ukuze uthole ulwazi olwengeziwe, bona "Amarejista Asendaweni” ekhasini 10.

Ukuze uthole ulwazi olwengeziwe mayelana nolwazi lwe-Spectral Band, bheka inothi lobuchwepheshe lokucushwa kwe-VT2 Vibration Spectral Band (p/n b_4510565).

Ukulungisa Isexwayiso kanye ne-alamu Threshold
Lawa manani agcinwa kumarejista endawo angaguquki ukuze ahlale ngokusebenzisa amandla outage.

Izinga lokushisa-The izilungiselelo zokushisa ezizenzakalelayo ngu-158 °F (70 °C) ngezexwayiso kanye no-176 °F (80 °C) wama-alamu.

Izinga lokushisa lingashintshwa lisuka ku-DXM Configuration Software, lisuka ku-Banner CDS. webisayithi, noma kusistimu yokusingatha exhunyiwe.

Ukudlidliza-Ngemva ukwenziwa kwesisekelo kuqediwe, izexwayiso nama-alamu threshold asethelwe isici ngasinye sokudlidliza ku-eksisi ngayinye ngokuzenzakalelayo. Kuya view lawo magugu, hlola amarejista 5181-5660 (amarejista ayi-12 inzwa ngayinye). Ukuze ulungise leyo mikhawulo, sebenzisa amarejista 7001-7320 (amarejista ayi-8 inzwa ngayinye). Ukucupha isisekelo esisha kubuyisela lawa marejista achazwe ngumsebenzisi kuqanda.

Lungisa i-Thresholds usebenzisa i-Configuration Software

1. Usebenzisa i-DXM Configuration Software, xhuma kusilawuli se-DXM esisebenzisa i-Vibration Application Guide.
2. Iya kokuthi Amathuluzi > Bhalisa View isikrini.
   • Izinga lokushisa-The isexwayiso sezinga lokushisa kanye nemingcele ye-alamu ikurejista 7681-7760 futhi ibhalwe ukuthi NX_TempW noma
     NX_TempA, lapho u-X eyi-ID yenzwa.
   • Ukudlidliza-I Isexwayiso sokudlidliza kanye nemikhawulo ye-alamu ikurejista 7001-7320 futhi ibhalwe ukuthi User_NX_XVel_Warning noma User_NX_XVel_Alarm, njll., lapho u-X eyi-ID Yenzwa.
3. Sebenzisa ikholomu engakwesokudla bese ufaka irejista yokuqala ukuze ushintshe kanye nenani lokubhala kurejista.
4. Chofoza Bhala Amarejista.
5. Phinda izinyathelo 3 no-4 ukuze uthole noma yimiphi eminye imikhawulo ukuze ishintshe.
6. Ukuze uguqule ama-threshold afinyelela kwangu-40 ngesikhathi, lungisa Inani lamarejista ngaphansi kwerejista yokuqala. Faka inani lerejista ngayinye bese uchofoza okuthi Bhala Amarejista uma usuqedile.
7. Ukuze ubuyele ekusebenziseni inani loqobo lokuqala lenzwa ethile:
   • Ukudlidliza- Setha irejista echazwe umsebenzisi (7001-7320) emuva kokuthi 0.

Lungisa i-Threshold kusuka ku-Banner CDS Webindawo

1. Esikrinini Sedeshibhodi, khetha Ideshibhodi efanelekile eyadalelwa ngokuzenzakalelayo isango lakho.
2. Ngaphakathi Kwedeshibhodi, chofoza isithonjana semoto esifanele sempahla ongathanda ukulungisa ama-threshold.
3. Chofoza View Into engaphakathi kokwaziswa okuvelayo.
4. Ngezansi kwamagrafu, faka amanani emingcele bese uchofoza okuthi Buyekeza.
   I-CDS yesibhengezo ibuyekeza izilungiselelo zesistimu ngesikhathi esilandelayo lapho Isilawuli siphushela emafini.
5. Skrolela phansi phakathi kwethreyi evela ezansi kwesikrini bese ufaka amanani owafisayo onqenqema kuzinkambu zezinombolo ezilandelanayo.
6. Chofoza okuthi Buyekeza.
   I-CDS yesibhengezo ibuyekeza izilungiselelo zesistimu ngesikhathi esilandelayo lapho isilawuli sesango siphushela emafini.
7. Phinda lezi zinyathelo kumkhawulo wenzwa ngayinye.
8. Kuma-threshold wokudlidliza, setha i-threshold ubuyele ku-0 ukuze ubuyele ekusebenziseni amanani ayisisekelo okuqala enzwa ethile.

Lungisa Ama-Threshold kusuka Kusistimu Yokusingatha Exhunyiwe

Exampamasistimu wokusingathwa angaba yi-PLC noma i-HMI.

1. Bhala inani elifanele kurejista lapho u-x eyi-ID Yenzwa.
   1. Izinga lokushisa-Inani ngo-°F noma °C ukubhalisa 7680 + x ukuze uthole isexwayiso sezinga lokushisa noma 7720 + x nge-alamu yezinga lokushisa.
      Ukudlidliza-Bhala kumarejista alandelayo.

      Bhalisa	Incazelo
      7000+(1) 9	Isexwayiso Sesivinini se-X-Axis
      7001+(x1) 9	I-alamu ye-X-Axis Velocity
      7002+(x1) 9	Isexwayiso se-Z-Axis Velocity
      7003+(- 1) 9	I-alamu ye-Z-Axis Velocity
      7004+(x1) 9	Isexwayiso Sokusheshisa kwe-X-Axis
      7005+(x1) 9	I-alamu yokusheshisa i-X-Axis
      700 + (1) × 9	Isexwayiso Sokusheshisa kwe-Z-Axis
      7007+(x1) 9	I-alamu yokusheshisa i-Z-Axis

   2. Ngamanani wokudlidliza, ukuze ubuyele ekusebenziseni inani loqobo lokuqala lenzwa, setha irejista echazwe umsebenzisi (7001-7320) emuva kokuthi 0.

Amamaski e-alamu
Izexwayiso nama-alamu ngaphakathi kwesistimu ziqukethwe kurejista yenzwa ngayinye (kufika kuzinzwa ezingama-40) kumarejista wendawo 201-240.
Lezi zimaski ze-alamu zibonwa ngokuzenzakalelayo yi-Banner CDS, ikwenze kube lula ukudala izexwayiso ngokusekelwe kumaski we-alamu. Nokho, ukuhlukaniswa okuphelele kunikezwa lapha ukuze usebenzise le datha ku-PLC noma olunye uhlelo lwamafu. Amarejista abhalwe ukuthi NXX VibMask lapho XX kuyinombolo yenzwa. Inani lerejista liwuhlobo lwedesimali lwenombolo kanambambili engu-18 enenani elingu-0 noma 1 ngenxa yokuthi inzwa ngayinye ingaba nama-mings noma ama-alamu angafika kwangu-18.

• Izaziso zesivinini-Khomba izinkinga zezimoto ezinemvamisa ephansi njengokungalingani, ukungaqondi kahle, unyawo oluthambile, ukuxega, njll.
• Izexwayiso zokusheshisa imvamisa ephezulu-Khomba ukwehluleka kokuqala kokuthwala, i-cavitation, ne-high-side gear mesh, njll.
• Izexwayiso ezibucayi-Khomba izinkinga ezenzeka ngokushesha ezenzeka ngemva kwezinhlanu zilandelana (ezilungisekayo kurejista 853) egijima sampngaphansi kwemingcele.
• Izexwayiso ezingapheli-Bonisa ukwehluleka kwesikhathi eside okusekelwe ku-avareji yokunyakaza yamaphoyinti angu-100 wokugijima sampngaphansi kwemingcele.

Amamaski kanambambili we-18-bit aphuke kanjena:

Kancane	Incazelo	Imaski kanambambili
0	Isexwayiso X Ans- Acule Velgosy	(0/1) x 20
1	Isexwayiso-XAns- I-Acute Acceleravan (H. Freq)	(0/1) 21
2	Isexwayiso – 2 A's Acure VegOLY	(0/1) 22
3	Isexwayiso – 2 Aus- Acure Acceleravon (H. Freq)	(0/1) 23
4	Αίαντι-Χλια Acule Velgary	(0/1) x24
5	I-Alan-XAG Acule Acceleravan (H. Freq)	(0/1) x25
6	I-Alan 2 Ans- Isivinini Esisebenzayo	(0/1) x26
7	I-Alam Z Aws - Ukusheshisa Okusebenzayo) iH grab(	(0/1) x27
8	Isexwayiso-XANs Isivinini Esingapheli	(0/1)x28
9	Isexwayiso- XAws – Ukusheshisa Okungapheli (H gab(	(0/1) 29
10	Isexwayiso- 2 Ais-Crone velocity	(0/1)210
11	Isexwayiso – 2 Aus – Cironic Acceleraugn (H. Freq)	(0/1)211
12	Alan-X Ana Chronic Veloclу	0/1(x212
13	I-alamu – XANG- Chronic Acceleravan (H. Freq)	(0/1) 213
14	I-alamu – Z Ans Chronic ngesivinini	(0/1) x214
15	Amazinga Okushisa Okushisa (> 158°F noma 70°C)	(0/1) x215
16	Amazinga Okushisa Okushisa (> 158°F noma 70°C)	(0/1) x216
17	Izinga Lokushisa Le-alamu (> 176°F noma 80°C)	(0/1) 217

Imaski kanambambili yerejista ye-18-bit

I-AcuteX-VelWarn	I-AcuteK-AccelWarn	I-AcuteZ-VelWarn	I-AcuteZ-AccelWarn	I-AcuteZ-AccelWarn	I-AcuteX-AccelAlarm	I-AcuteZ-VelWarn	I-AcuteZ-AccelAlarm	I-Chronic X-10/Isexwayiso	Isexwayiso se-X-Accel Esingapheli	I-ChronicZ-VelWarn	Isexwayiso se-Z-Accel Esingapheli	I-ChronicX-VelAlam	I-ChronicX-Accel Alarm	I-Z-VelAlarm Engapheli	I-alamu ye-Z-Accel Engapheli	I-Temp Waming	Temp Alam
0	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0

I-Vibe Mask Registers iboniswa ngendlela yedesimali futhi iyisamba sezibalo eziboniswe kukholamu engakwesokudla yerejista yemaski Yenzwa ngayinye. Qaphela ukuthi noma yiliphi inani elikhulu kunoziro kumarejista 201 kuya ku-240 libonisa isixwayiso noma i-alamu yaleyo nzwa ethile.

Ukuze wazi ukufudumeza kwangempela noma i-alamu, bala inani kanambambili enanini ledesimali, elingenziwa kusayithi yesibhengezo se-CDS noma kungenziwa nge-PLC noma i-HMI. Izexwayiso eziningi nama-alamu angase acuphe umcimbi ngokuya ngobunzima.

Amarejista wendawo

Umhlahlandlela Wezicelo files abiwe ngabakwaBanner Solutions Kits. Amanye amarejista achazwa ngokuthi ukusebenza kwe-Solutions Kit afaneleka kuphela kumasistimu asebenzisa ama-Banner Solutions Kits asebenzisa isikrini se-HMI. I-variable N imele i-ID yenzwa engu-1-40.

Igama	Bhalisa	Ibanga	Incazelo	Okuzenzakalelayo kwe-Cloud Push
Idatha yokudlidliza	1+(N1) × 5	1-200	Isivinini se-Z-eksisi	✓
	2+(N1) x 5		I-Z-axis high-frequency acceleration	✓
	3+(N 1) × 5		Isivinini se-X-eksisi	✓
	4+(N 1 5		I-X-axis high-frequency acceleration	✓
	5+(N- 1) × 5		Izinga lokushisa	✓
I-Vibration Mask	201+(N 1)	201-240	Umlayezo we-alamu ogcwele kancane	✓
Run Flag	241+(N- 11	241-29O	Ifulegi lezimoto ezigijimayo (0/1)
Isimo Senzwa	291+(N- 1)	291-320	Isimo sokuxhuma senzwa (128 = Ixhunyiwe)	✓
Isisekelo	321+(N- 1)	321-360	Trigger to re-baseline sensor (0/1)	Funda/Bhala
Idatha Yokubhalisa Okungahluziwe	1+(N1) × 5	361-560	Irejista yesimeli sombhalo
	2+(N1 5
	3+(N1) × 5
	4+ (N 1) ×5
	S+(N-1) 5
Isexwayiso/Amamaski e-alamu		I-S61-574	OR’ d Alarm registers
Isikhashana NOMA		575-576
Umsakazo Wesimo NOMA		577-579
Isexwayiso Sezinga lokushisa	591+(N 1)	591-620	Irejista yesixwayiso sokushisa ngazinye (0/1)
I-alamu yezinga lokushisa	621+(N- 1)	621-660	Amarejista ama-alamu okushisa angawodwana (0/1)
Qalisa ama-Thresholds Constant	661+(N-1)	661-700	I-Threshold constant yokuzimisela kokugijima kwemoto
	701+(N- 1)	701-740
	741+(N- 1)	741-790
	791+(N- 1)	791-920
Izibani Zesexwayiso		925-930
Sample Bala		831	Ukusebenza Kwekhithi Yezixazululo
Ukutholwa Kwenzwa		833
Ukuguqulwa Kwenethiwekhi		833
Sample Isikhathi		834
Push Bala		835
Izinzwa 1-10 Isimo		836
Izinzwa 11-20 Isimo		837
Izinzwa 21-30 Isimo		838
Izinzwa 31-40 Isimo		839
Ngokushesha Sampi-Trigger		843
I-Cloud Push Vumela		844	Nika amandla noma vala ukuphusha kwamafu
Okokuqala Run		851	Ukusebenza kwekhithi Yezixazululo (0/1, isethwe ku-0 ukuze uqalise kabusha izilungiselelo)
Isisekelo sampLes		852	Setha inombolo ka-samples kwesisekelo (okuzenzakalelayo 300)
Acute Sample		853	Inombolo ye-sampama-lens emgqeni wephutha elinamandla (okuzenzakalelayo 5)
N/A		854	I-NIA
Inombolo Yokuqala Yeseva		855	Inombolo yokuqala yekheli leseva (okuzenzakalelayo 11)
Isikhathi Sokulinda Isimo Sokuyeka		856	Sampngaphambi kokuphinda uhlole iseva ephume ohlelweni (okuzenzakalelayo 48)
Sample Rate		857	Linganisa, ngemizuzwana, ukuze uhlelo lube ngu-sampinzwa ngayinye (okuzenzakalelayo 300)
I-Spectral Banding Ivuliwe/Ivaliwe	858	(1001-2440)	Nika amandla noma khubaza ibhendi ye-spectral
Spectral Band Information (Floating Paint Registers)	1001 + (N – 1] x 36		Ibhendi ye-Z-axis yesivinini engu-1x
	1003 + (N 1) ×36		Ibhendi ye-Z-axis peak velocity 1x
	1005 + (N 1) 36		I-Z-axis velocity peak imvamisa yebhendi engu-1x
	1007+(N 1) ×36		Ibhendi ye-Z-axis yesivinini engu-2x
	1009 + (N 1) × 36		Ibhendi ye-Z-axis peak velocity 2x
	1011 + (N – 1) 36		Z-axis velocity peak frequency 2xband
	1013 + (N – 1) x 36		Ibhendi ye-Z-axis yesivinini engu-3x-10x
	1015+ (N 1) 36		Ibhendi ye-Z-axis peak velocity 3x-10x
	1017+(N1) 36		I-Z-axis velocity peak imvamisa yebhendi engu-3x-10x
	1019 + (N – 1] x 36		Ibhendi ye-X-axis yesivinini engu-1x
	1021 +(N 1) ×36		I-X-axis peak velocity 1x ibhendi
	1023 + (N 1) × 36		I-X-axis velocity peak imvamisa yebhendi engu-1x
	1025 + (N – 1] 36		Ibhendi ye-X-axis yesivinini engu-2x
	1027 +(N 1) ×36		I-X-axis peak velocity 2x ibhendi
	1029 + (N 1) ×36		I-X-axis velocity peak imvamisa yebhendi engu-2x
	1031+(N 1) 36		X-axis velocity 3x-10xband
	1033 + (N 1) 36		I-X-axis peak velocity 3x-10x ibhendi
	103 + (N – 1] x 36		I-X-axis velocity peak imvamisa yebhendi engu-3x-10x
Ucwaningo Lwesiza		$001-5005	Solutians Kit registers for site survey
Iyabophezela		I-S006-5007	Solutians Kit registers for binding

Chronic Fault Trends 100 Poir Moving Average	5021+(N 1) x4	I-S021-5190	Umkhuba wesivinini Z
	5022+ (N 1) 4		Z ukusheshisa umkhuba
	5023+(N1) x4		Ithrendi yesivinini esingu-X
	5024+ (N 1) x 4		X umkhuba wokusheshisa
Isisekelo Esibonakalayo kanye nama-alamu	5191+ (N- 1) 12	$191-5660	Thresholds being used for alarms (Selected from learned or user defined)	Phusha kanye ngosuku e-UTC 00:00
Leaned Thresholds	5661+(N- 1) 9	5661-5990	Thresholds from algorithm (used in 5181-5660 if equivalent user thresholds in 7001-7320 are setto 0)
Ukufunda Kwesikhathi Esilinganisiwe	9991+ (N- 1)	5991-6020	Irejista yesimeli sombhalo
Amarejista Okudlidliza Engeziwe	6141+(N 1) 10	6141-6540	Ukusheshisa okuphezulu kwe-axis
	6142 + (N 1) 10		Ukusheshisa okuphezulu kwe-X-axis
	6143+ (N 1) 10		Ingxenye ye-Z-axis peak velocity velocity
	6144 +(N-1) 10		Ingxenye ye-X-axis peak velocity velocity
	6145 + (N 1) 10		Ukusheshisa okuphansi kwe-Z-axis RMS
	6146+ (N 1) 10		X-axis RMS ow acceleration
	6147 +(N1) x 10		I-Z-axis kurtosis
	614) + (N – 1) × 10		I-X-axis kurtosis
	6149 +(N 1) 10		I-Z-axis crest factor
	6190 +(N1) 10 X-axis crest factor		I-X-axis crest factor
Okokufaka kwesivinini (Hz)	6581 + M – 11	6591-6620	Okokufaka kwesivinini ku-Hz kumarejista ebhendi ye-spectral
Ama-Threshold Achaziwe Umsebenzisi	7001+(N- 1) 9	7001-7320	Ama-threshold wokudlidliza achazwe umsebenzisi (izobhala ngaphezulu ama-threshold afundiwe)
I-Saved Count/Mean/StdDev	7321+(N1) x9	7321-7690	Solutians Kit functionality
I-Temp Warn Thresholds	7891+(N- 1)	7691-7720	Imikhawulo yesixwayiso sezinga lokushisa echazwe ngumsebenzisi	Push once a day at UTC 00:00/Write
Temp Alarm Threshalds	7721+(N- 1)	7721-7760	Imikhawulo ye-alamu yezinga lokushisa echazwe ngumsebenzisi
Izinombolo Zembobo ye-DXMR90	7991+ N 1)	7991-7920	Dead 10 zero. Meaning sent. Seng 1-4 in indicate the port number of the sensor attached. Used to keep same outs low, reducing server IDs talked to by the system.

Isihloko sedokhumenti: VIBE-IQ® Application Guide for the DXMR90
Inombolo yengxenye: b_51166713
Isibuyekezo: B
Imiyalelo Yoqobo
I-Banner Engineering Corp. Wonke amalungelo agodliwe.

Amadokhumenti / Izinsiza

I-BANNER DXMR90 Isilawuli Senzwa Yomshini Wokucubungula [pdf] Umhlahlandlela Womsebenzisi I-DXMR90 Isilawuli Senzwa Yomshini Wokucubungula, i-DXMR90, Isilawuli Senzwa Yomshini Wokucubungula, Inzwa Yomshini Wokucubungula, Inzwa Yomshini

Izithenjwa

• Imaniwali yosebenzisayo