S 10
IMANIWALI YOSEBENZISAYO
Idethi Yokusabalalisa: Aug 15,2022
I-S10 Line Array System
Imanuwali yomsebenzisi ye-S10
Idethi Yokusabalalisa: Agasti 15, 2022
Copyright 2022 by Adamson Systems Engineering Inc.; wonke Amalungelo Agodliwe
Le manuwali kufanele ifinyeleleke kumuntu osebenzisa lo mkhiqizo. Kanjalo, umnikazi womkhiqizo kufanele awugcine endaweni ephephile futhi awenze utholakale lapho uceliwe kunoma yimuphi umqhubi.
Le manuwali ingalandwa kusuka
https://adamsonsystems.com/support/downloads-directory/s-series/S10
Ukuphepha Nezixwayiso
Funda le miyalo, uyigcine itholakala ukuze uyisebenzise.
Le manuwali ingalandwa kusuka
https://adamsonsystems.com/support/downloads-directory/s-series/S10
Lalela zonke izixwayiso futhi ulandele yonke imiyalelo.
Uchwepheshe oqeqeshiwe kufanele abe khona ngesikhathi kufakwa futhi kusetshenziswa lo mkhiqizo. Lo mkhiqizo uyakwazi ukukhiqiza amazinga aphezulu wokucindezela komsindo futhi kufanele usetshenziswe ngokuhambisana nemithetho eshiwo yezinga lomsindo wendawo kanye nokwahlulela okuhle. I-Adamson Systems Engineering ngeke ibophezeleke ngomonakalo odalwe yinoma yikuphi ukusetshenziswa kabi okungenzeka kwalo mkhiqizo.
Ukusevisa kuyadingeka lapho isipikha sonakaliswe nganoma iyiphi indlela, njengalapho isipikha sehlisiwe; noma lapho ngezizathu ezinganqunyiwe isipikha singasebenzi ngendlela evamile. Hlola imikhiqizo yakho njalo ukuze uthole noma yikuphi ukungahambi kahle kokubonwayo noma ukusebenza.
Vikela ikhebula ekuhanjweni ngayo noma ekuncishweni.
View ividiyo ye-S-Series Rigging Tutorial kanye/noma ufunde I-S-Series Rigging Manual ngaphambi kokumisa umkhiqizo.
Naka imiyalo yokukhohlisa efakwe kukho kokubili i-Blueprint kanye ne-S-Series Rigging Manual.
Sebenzisa kuphela amafreyimu/izinto ezisetshenziswayo ezicaciswe ngu-Adamson, noma ezithengiswa ngesistimu yesipikha.
Lesi sipikha esivalekile siyakwazi ukudala indawo eqinile kazibuthe. Sicela usebenzise ukuqaphela endaweni ebiyelwe ngemishini yokugcina idatha efana nama-hard drive.
Emzamweni wokuthuthukisa ngokuqhubekayo imikhiqizo yayo, i-Adamson ikhipha isofthiwe ehambisanayo ebuyekeziwe, okusethiwe ngaphambili namazinga emikhiqizo yayo. I-Adamson inelungelo lokushintsha imininingwane yemikhiqizo yayo kanye nokuqukethwe kwemibhalo yayo ngaphandle kwesaziso sangaphambili.
I-S10 Sub Compact Line Array
- I-S10 iyi-sub-compact, 2-way, umugqa womugqa ogcwele ophelele oklanyelwe amandla okuphonsa anwetshiwe. I +iqukethe ama-transducers amabili ahlotshiswe ngokulinganayo angu-10” kanye nomshayeli wokucindezela ongu-4” ofakwe ku-waveguide ye-Adamson.
- Kungafika kokungu-20 S10 kungandiziswa ngohlelo olufanayo uma kusetshenziswa Uhlaka Losekelo Lwe-Sub-Compact (930-0020).
- Ngenxa yokusetshenziswa kwe-Controlled Summation Technology, i-S10 igcina iphethini yokuhlakazeka evundlile engashintshi engu-110° yehle iye ku-250Hz.
- I-waveguide ephezulu iklanyelwe ukuhlanganisa amakhabethe amaningi kulo lonke ibhendi yefrikhwensi ehlosiwe ngaphandle kokulahlekelwa ukuhambisana.
- Kunezindawo zokugebenga ezingu-9 ezitholakalayo, ezisukela ku-0° ukuya ku-10°. Hlala ubheka i-Blueprint AV™ kanye ne-S-Series Rigging Manual ukuze uthole izindawo ezifanele zokugebenga kanye nemiyalelo efanele yokuma.
- Ukusebenzisa kuka-Adamson ubuchwepheshe bobunikazi obufana ne-Controlled Summation Technology kanye ne-Advanced Cone Architecture kunikeza i-S10 i-SPL ephezulu kakhulu.
- I-impedance encane ye-S10 ingu-8 Ω ngebhendi ngayinye.
- Ibanga lefrikhwensi yokusebenza ye-S10 ngu-60Hz ukuya ku-18kHz, +/- 3 dB.
- I-S10 ihloselwe ukusetshenziswa njengohlelo oluzimele noma neminye imikhiqizo ye-S-Series. I-S10 yakhelwe ukubhanqa kalula futhi ngokuhambisana nawo wonke ama-subwoofers e-Adamson.
- Indawo ebiyelwe ngokhuni yenziwe nge-plywood ye-birch grade yasolwandle, futhi inohlelo lwe-aluminium nensimbi olufakwe ekhoneni ngalinye. Ngaphandle kokudela i-resonance ephansi ezintweni eziyinhlanganisela, i-S10 iyakwazi ukugcina isisindo esiphansi sama-27 kg / 60 lbs.
- I-S10 yakhelwe ukusetshenziswa ne-Lab.gruppen's PLM+ Series ampabagibeli.
Izintambo
- I-S10 (973-0003) iza noxhumo lwe-2x Neutrik Speakon™ NL8, olunezintambo ezifanayo.
- Izikhonkwane ezingu-3+/- zixhunywe kuma-transducer angu-2x ND10-LM MF, anezintambo ngokuhambisana.
- Izikhonkwane ezingu-4+/- zixhunywe ku-NH4TA2 HF transducer.
- Amaphinikhodi 1+/- kanye no-2+/- awaxhunyiwe.
U-ADAMSON S10
UHLELO LOMUGQA OHLANGANISIWE
S10 Jackplate
Ampukuqinisa
I-S10 ihlanganiswe ne-Lab Gruppen Uchungechunge lwe-PLM+ ampabagibeli.
Amanani aphezulu we-S10, noma i-S10 ebhangqwe ne-S119 ngayinye ampimodeli ye-lifier iboniswe ngezansi.
Ukuze uthole uhlu oluyinhloko, sicela ubhekisele ku-Adamson AmpIshadi lokukhishwa, elitholakala lapha, ku-Adamson webindawo.
Ukusetha ngaphambilini
I-Adamson Load Library, iqukethe izinto ezisethiwe ezidizayinelwe izinhlobonhlobo zezinhlelo zokusebenza ze-S10. Ukusetha ngaphambilini ngakunye kuhloswe ukuthi kuhambisane nesigaba ne-S118 noma i-S119 subwoofers ngaphakathi kwesifunda esigqagqene se-EQ.
Ukuze uthole uhlu oluyinhloko, sicela ubheke i-Adamson PLM & Lake Handbook.
Lapho amakhabhinethi nama-subwoofers ebekwe ngokwehlukana, ukuqondanisa kwesigaba kufanele kulinganiswe nesofthiwe efanelekile.
 |
I-S10 Lipfill Ihloselwe ukusetshenziswa ne-S10 eyodwa |
 |
I-S10 Compact Ihloselwe ukusetshenziswa namalungu afanayo angu-4 S10 phezu kwababhalisile abangu-2 noma abangu-3 |
 |
I-S10 Ifushane Ihloselwe ukusetshenziswa nohlu lwe-5-6 S10 |
 |
I-S10 Array Ihloselwe ukusetshenziswa nohlu lwe-7-11 S10 |
 |
I-S10 Enkulu Ihloselwe ukusetshenziswa namalungu afanayo angu-12 noma ngaphezulu S10 |
Lawula
I-Array Shaping imbondela (etholakala kumafolda e-Array Shaping we-Adamson Load Library) ingakhunjulwa esigabeni se-EQ seLake Controller ukuze kulungiswe i-contour yamalungu afanayo. Ukukhumbula imbondela ye-EQ efanele noma ukusetha ngaphambilini kwenani lamakhabethe asetshenziswayo kuzonikeza impendulo evamile ye-Adamson yefrikhwensi yamalungu afanayo, kunxephezela ukuhlanganisa okuhlukile kwefrikhwensi ephansi.
Imbondela enyakazayo (etholakala kumafolda e-Array Shaping we-Adamson Load Library) ingasetshenziswa ukuze kushintshwe yonke impendulo ye-acoustic yohlu. Imbondela enyakazayo isebenzisa isihlungi, esimaphakathi ku-1kHz, esifinyelela ekusikeni kwe-decibel okuphawuliwe noma i-boost ekugcineni okudlulele kwe-spectrum yokulalela. Okwesiboneloample, i-+1 Tilt izosebenza +1 decibel ku-20kHz kanye -1 decibel ngo-20Hz. Ngokunye, i- -2 Tilt izosebenza -2 decibels ku-20kHz kanye nama-decibel angu-+2 ngo-20Hz.
Sicela ubhekisele ku-Adamson PLM & Lake Handbook ukuze uthole imiyalelo enemininingwane yokukhumbula izimbondela ze-Tilt ne-Array Shaping.
Ukuhlakazeka
Imininingwane Yezobuchwepheshe
| I-Frequency Range (+/- 3dB) | 60 Hz - 18 kHz |
| Ukuqondisa Kwegama (-6 dB) H x V | 110° x 10° |
| Isiqongo esiphezulu SPL** | 141.3db |
| Izingxenye LF | 2x ND1O-LM 10′ Kevlar0 Neodymium Driver |
| Izingxenye ze-HF | I-Adamson NH4TA2 4′ Diaphragm / 1.5′ Phuma Umshayeli Wokucindezela |
| I-Nominal Impedance LF | 2 x 16 Ω (8 Ω) |
| I-Nominal Impedance HF | 8Ω |
| Ukubamba Amandla (AES / Peak) LF | 2x 350 / 2x 1400 W |
| Ukubamba Amandla (AES / Peak) HF | 160/640 W |
| Ukukhwabanisa | Isistimu yokufaka i-SlideLock |
| Ukuxhumana | 2x Speakonw NL8 |
| Ubude bangaphambili (mm / in) | 265/10.4 |
| Ubude Emuva (mm / in) | 178/7 |
| Ububanzi (mm / in) | 737/29 |
| Ukujula (mm / phakathi) | 526/20.7 |
| Isisindo (kg/lbs) | 27/60 |
| Iyacubungula | Ichibi |
** 12 dB crest factor pink umsindo ku-1m, inkambu yamahhala, usebenzisa ukucubungula okucacisiwe kanye ampukuqinisa
Izesekeli
Kunenqwaba yezesekeli ezitholakalayo zamakhabhinethi awumugqa we-Adamson S10 Uhlu olungezansi luyizesekeli ezimbalwa kuphela ezitholakalayo.
I-Sub-Compact Support Frame (930-0025)
Uhlaka losekelo lwezindawo ezivalekile ze-S7, CS7, S118, kanye ne-CS118
I-Beam Enwetshiwe (930-0021)
Ivumela ukuphinyiselwa kwamalungu afanayo okukhulu
I-Moving Point Extended Beam (930-0033)
I-extension beam enephoyinti lokukhetha elilungiseka ngokuqhubekayo
Ikhithi ye-Adapter ye-Sub-Compact Underhang (931-0010)
Imisa okwesikhashana i-S10/S10n/CS10/
I-CS10n evalekile kusetshenziswa Uhlaka Losekelo Lwe-Sub-Compact (ingxenye engunombolo. 930-0020) kusuka ezindaweni ezivalekile zomthombo womugqa we-E-Series 3
Izingcwecwe Zokuphakamisa Ezinwetshiwe (930-0033)
Amapuleti aphakamisayo anesinqumo esihle sokukhetha amaphuzu ama-hang point single
I-Line Array H-Clamp (932-0047)
I-Articulator evundlile clamp ezosetshenziswa namafreyimu okuriga womugqa we-S-Series/CS-Series/IS-Series
Izimemezelo
Isimemezelo Se-EU Sokuhambisana
I-Adamson Systems Engineering imemezela ukuthi imikhiqizo ebhalwe ngezansi ihambisana nempilo eyisisekelo kanye nemibandela yokuphepha ye-EC Directive(s), ikakhulukazi:
I-Directive 2014/35/EU: Ivolumu Ephansitage Isiqondisi
973-0003 S10
I-Directive 2006/42/EC: I-Machinery Directive
930-0020 I-Sub-Compact Support Frame
930-0021 I-Beam Enwetshiwe
930-0033 Iphuzu Elinyakazayo Elinwetshiwe
931-0010 Ikhithi ye-adaptha ye-Sub-Compact Underhang
932-0035 S10 Ipuleti Lokuphakamisa elinamaphini angu-2
932-0043 Izingcwecwe Zokuphakamisa Ezandisiwe
932-0047 Line Array H-Clamp
Isayinwe e-Port Perry, ON. CA - Agasti 15, 2022
UBrock Adamson (uMongameli kanye ne-CEO)
Inkampani ADAMSON SYSTEMS ENGINEERING, Inc.
1401 Scugog Line 6
Port Perry, Ontario, Canada
I-L9L 0C3
T: +1 905 982 0520, F: +1 905 982 0609
I-imeyili: info@adamsonsystems.com
Webindawo: www.adamsonsystems.com
S- Uchungechunge
Amadokhumenti / Izinsiza
 |
ADAMSON S10 Line Array System [pdf] Imaniwali yosebenzisayo S10 Line Array System, S10, Line Array System, Array System |
