S 10
INCWADI YOKUSEBENZISA
Umhla wokuhanjiswa: Aug 15,2022
S10 Line Array System
S10 Incwadi yoMsebenzisi
Umhla wokusasazwa: 15 Agasti 2022
Ilungelo lokushicilela ngo-2022 nguAdamson Systems Engineering Inc.; onke Amalungelo Agciniwe
Le ncwadana kufuneka ifikeleleke kumntu osebenzisa le mveliso. Ngaloo ndlela, umnini wemveliso kufuneka ayigcine kwindawo ekhuselekileyo kwaye enze ukuba ifumaneke xa iceliwe kuye nawuphi na umsebenzisi.
Le ncwadana inokukhutshelwa kwi
https://adamsonsystems.com/support/downloads-directory/s-series/S10
Ukhuseleko & Izilumkiso
Funda le miyalelo, yigcine ifumaneka ukuze ireferensi.
Le ncwadana inokukhutshelwa kwi
https://adamsonsystems.com/support/downloads-directory/s-series/S10
Mamela zonke izilumkiso kwaye ulandele yonke imiyalelo.
Igcisa eliqeqeshiweyo kufuneka libekho ngexesha lokufakwa kunye nokusetyenziswa kwale mveliso. Le mveliso inako ukuvelisa amanqanaba oxinzelelo lwesandi aphezulu ngokugqithisileyo kwaye kufuneka isetyenziswe ngokungqinelana nemigaqo echaziweyo yenqanaba lesandi sasekhaya kunye nengqiqo elungileyo. I-Adamson Systems Engineering ayisayi kuba noxanduva lomonakalo obangelwa kuko nakuphi na ukusetyenziswa kakubi kwale mveliso.
Inkonzo iyafuneka xa isandisi-lizwi sonakaliswe nangayiphi na indlela, njengaxa siwisiwe isandisi-lizwi; okanye xa ngenxa yezizathu ezingamiselwanga isandisi-lizwi singasebenzi ngokuqhelekileyo. Zihlole rhoqo iimveliso zakho ukuze ubone naziphi na izitenxo ezibonakalayo okanye zokusebenza.
Khusela i-cabling ekuhanjweni kuyo okanye ekucuthweni.
View i-S-Series Rigging Tutorial video kunye / okanye ufunde i-S-Series Rigging Manual ngaphambi kokumisa imveliso.
Nika ingqalelo kwimiyalelo yokurhweba ebandakanyiweyo kuzo zombini iiBlueprint kunye ne-S-Series Rigging Manual.
Sebenzisa kuphela ngezakhelo zokuriga/izixhobo ezichazwe ngu-Adamson, okanye ezithengiswa ngesixokelelwano sesandisi-lizwi.
Le ndawo ebiyelweyo yesithethi iyakwazi ukwenza indawo eyomeleleyo yemagnethi. Nceda usebenzise isilumkiso malunga nendawo ebiyelweyo enezixhobo zokugcina idatha efana neehard drives.
Kwiinzame zokuqhubeka nokuphucula iimveliso zayo, i-Adamson ikhupha isoftware ehamba kunye, ukusetha kwangaphambili kunye nemigangatho yeemveliso zayo. U-Adamson unelungelo lokutshintsha imilinganiselo yeemveliso zayo kunye nomxholo wamaxwebhu ayo ngaphandle kwesaziso sangaphambili.
S10 Sub Compact Line Array
- I-S10 yi-sub-compact, i-2-way, uluhlu olupheleleyo lomgca woluhlu oluvaliweyo oluyilelwe ukujula okwandisiweyo. I- +iqulethe ii-transducers ezimbini ezine-symmetrically arrayed 10” kunye ne-4” yomqhubi woxinzelelo obekwe kwi-Adamson waveguide.
- Ukuya kuthi ga kwi-20 S10 inokubhabha kwi-array efanayo xa usebenzisa i-Sub-Compact Support Frame (930-0020).
- Ngenxa yokusetyenziswa kweTekhnoloji yoShwankathelo oluLawulwayo, i-S10 igcina ipateni engaguqukiyo ethe tyaba yokusasazwa kwe-110 ° ukuya kutsho kwi-250Hz.
- I-waveguide ephezulu ye-waveguide yenzelwe ukudibanisa iikhabhathi ezininzi kuyo yonke ibhendi yefrikhwensi ecetywayo ngaphandle kokulahleka kokuhambelana.
- Kukho iindawo zokurhweba ezili-9 ezikhoyo, ezithatha i-0 ° ukuya kwi-10 °. Soloko ujongana neBlueprint AV™ kunye ne-S-Series Rigging Manual ukuze ufumane iindawo ezichanekileyo zokurhiga kunye nemiyalelo yokurhwasha efanelekileyo.
- Ukusetyenziswa kuka-Adamson kobuxhakaxhaka bobuchwephesha obufana neTekhnoloji yoSishwankathelo eLawulayo kunye ne-Advanced Cone Architecture inika i-S10 i-SPL ephezulu kakhulu.
- I-impedance yegama le-S10 yi-8 Ω ngebhendi nganye.
- Uluhlu lwe-frequency yokusebenza kwe-S10 yi-60Hz ukuya kwi-18kHz, +/- 3 dB.
- I-S10 ijonge ukusetyenziswa njengenkqubo ezimele okanye nezinye iimveliso ze-S-Series. I-S10 yenzelwe ukudibanisa ngokulula nangokuhambelana nazo zonke ii-subwoofers ze-Adamson.
- Indawo ebiyelweyo yokhuni yenziwe nge-plywood ye-birch grade yaselwandle, kwaye ine-aluminium kunye ne-steel rigging system ebekwe kwikona nganye. Ngaphandle kokuncama i-resonance ephantsi kwizinto ezidibeneyo, i-S10 iyakwazi ukugcina ubunzima obuphantsi be-27 kg / 60 lbs.
- I-S10 yenzelwe ukusetyenziswa kunye neLab.gruppen's PLM+ Series ampabaphilayo.
Iintambo
- I-S10 (973-0003) iza noqhagamshelo lwe-2x Neutrik Speakon™ NL8, enentambo ngokunxuseneyo.
- Izikhonkwane ze-3 +/- zixhunyiwe kwi-2x ND10-LM MF transducers, ezifakwe kwi-parallel.
- Izikhonkwane ze-4 +/- zixhunyiwe kwi-NH4TA2 HF transducer.
- Izikhonkwane 1+/- kunye ne-2+/- azixhunyiwe.
UADAMSON S10
UMGANGATHO ONGAXHUMENEYO
S10 Jackplate
Ampukungqinisisa
I-S10 idityaniswe neLab Gruppen PLM+ Series ampabaphilayo.
Ubuninzi be-S10, okanye i-S10 edityaniswe ne-S119 nge ampimodeli ye-lifier iboniswe ngezantsi.
Ngoluhlu oluphambili, nceda ubhekisele kwi-Adamson AmpItshathi yohlaziyo, efumaneka apha, kwiAdamson webindawo.
Ukusetha kwangaphambili
I-Adamson Load Library, iqulethe i-presets eyenzelwe iindidi ezahlukeneyo ze-S10. Ukusetha kwangaphambili ngakunye kujonge ukulungelelaniswa kwesigaba nokuba yi-S118 okanye i-S119 subwoofers ngaphakathi kwe-EQ overlap region.
Kuluhlu olubalaseleyo, nceda ubhekisele kwi-Adamson PLM & Lake Handbook.
Xa iikhabhinethi kunye ne-subwoofers zibekwe ngokwahlukileyo, ukulungelelaniswa kwesigaba kufuneka kulinganiswe ngesofthiwe efanelekileyo.
 |
S10 Lipfill Yenzelwe ukusetyenziswa nge-S10 enye |
 |
S10 Compact Yenzelwe ukusetyenziswa kunye noluhlu lwe-4 S10 ngaphezulu kwe-2 okanye i-3 subs |
 |
S10 Mfutshane Yenzelwe ukusetyenziswa kunye noluhlu lwe-5-6 S10 |
 |
Uluhlu lwe-S10 Yenzelwe ukusetyenziswa kunye noluhlu lwe-7-11 S10 |
 |
S10 Enkulu Yenzelwe ukusetyenziswa kunye noluhlu lwe-12 okanye ngaphezulu kwe-S10 |
Ulawulo
I-Array Shaping overlays (efumaneka kwi-Array Shaping folders ye-Adamson Load Library) inokukhunjulwa kwicandelo le-EQ yeLake Controller ukulungisa i-contour yoluhlu. Ukukhumbula i-EQ efanelekileyo yokwaleka okanye ukusetwa kwangaphambili kwenani leekhabhathi ezisetyenziswayo kuya kubonelela ngempendulo eqhelekileyo ye-Adamson yoluhlu lwakho, ihlawulela ukudityaniswa kwe-frequency eyahlukeneyo.
Tilt izalekayo (ezifumaneka kwi-Array Shaping folders ye-Adamson Load Library) ingasetyenziselwa ukuguqula yonke impendulo ye-acoustic yoluhlu. Izigqubuthelo ezithe tye zisebenzisa isihluzi, esisembindini we-1kHz, esifikelela kwi-decibel esikiweyo ephawulweyo okanye eyonyuswe kwiziphelo ezigqithisileyo zomamela. Umzekeloample, i +1 Tilt iya kusebenza +1 decibel ku-20kHz kunye ne-1 decibel ku-20Hz. Ngenye indlela, i-2 Tilt iya kusetyenziswa -2 decibels kwi-20kHz kunye ne-2 decibels kwi-20Hz.
Nceda ubhekisele kwi-Adamson PLM & Lake Handbook ngemiyalelo eneenkcukacha yokukhumbula iTilt neArray Shaping umaleko.
Ukusasazwa
IiNgcaciso zobuGcisa
| Uluhlu lokuphindaphinda (+/- 3dB) | 60 Hz – 18 kHz |
| UNgqongo ngokweMiqathango (-6 dB) H x V | 110° x 10° |
| Ubuninzi beNcopho ye-SPL** | 141.3 dB |
| Amacandelo LF | 2x ND1O-LM 10′ Kevlar0 Neodymium Driver |
| Amacandelo HF | Adamson NH4TA2 4′ Diaphragm / 1.5′ Phuma kwiCompression Driver |
| I-Nominal Imedance LF | 2 x 16 Ω (8 Ω) |
| I-Nominal Imedance HF | 8Ω |
| Ukuphathwa kwamandla (AES / Peak) LF | 2x 350 / 2x 1400 W |
| Ukuphathwa kwamandla (AES / Peak) HF | 160 / 640 W |
| Rigging | IsiXhobo sokuQhuba iSilayidi |
| Uqhagamshelwano | 2x Speakonw NL8 |
| Ubude bangaphambili (mm / ngaphakathi) | 265 / 10.4 |
| Ubude obubuyayo (mm / ngaphakathi) | 178 / 7 |
| Ububanzi (mm / ngaphakathi) | 737 / 29 |
| Ubunzulu (mm / ngaphakathi) | 526 / 20.7 |
| Ubunzima (kg / lbs) | 27 / 60 |
| Iyaqhuba | Ichibi |
** I-12 dB crest factor pink ingxolo kwi-1m, indawo ekhululekile, usebenzisa ukusetyenzwa okuchaziweyo kunye ampukungqinisisa
Izincedisi
Kukho inani lezixhobo ezikhoyo kwi-Adamson S10 iikhabhinethi zomgca we-array Uluhlu olungezantsi lumbalwa lwezixhobo ezikhoyo.
Isakhelo seNkxaso eNcincisayo (930-0025)
Isakhelo senkxaso ye-S7, CS7, S118, kunye ne-CS118 evaliweyo
iBeam eyandisiweyo (930-0021)
Yamkela uluhlu olukhulu lokudityaniswa
Indawo eshukumayo iBeam eyandisiweyo (930-0033)
Umqadi wokwandiswa kunye nendawo yokukhetha ehlengahlengiswayo
I-Sub-Compact Underhang Adapter Kit (931-0010)
Inqumamisa i-S10/S10n/CS10/
Iindawo ezivaliweyo ze-CS10n ngokusetyenziswa kweSakhelo seNkxaso ye-Sub-Compact (inxalenye engunombolo 930-0020) ukusuka kwi-E-Series 3-way line source sources ezivaliweyo
Iipleyiti zokuPhakamisa ezongeziweyo (930-0033)
Iipleyiti eziphakamisayo ezinesisombululo esihle thatha iindawo zokuxhoma kwindawo enye
Line Array H-Clamp (932-0047)
I-articulator ethe tye clamp izakusetyenziswa nge-S-Series/CS-Series/IS-Series izakhelo zokurhweba ngoluhlu lwemigca
Izibhengezo
Isibhengezo se-EU sokuThobela
I-Adamson Systems Engineering ibhengeza ukuba iimveliso ezichazwe ngezantsi ziyahambelana nempilo esisiseko efanelekileyo kunye neendlela zokhuseleko zoMyalelo osebenzayo we-EC, ngakumbi:
Umyalelo we-2014/35/EU: Umthamo ophantsitagUmyalelo
973-0003 S10
I-Directive 2006/42/EC: UMyalelo ngoomatshini
I-930-0020 iSakhelo seNkxaso yeNkxaso encinci
930-0021 iBeam eyandisiweyo
930-0033 Indawo eshukumayo iBeam eyandisiweyo
I-931-0010 I-Sub-Compact Underhang Adapter Kit
I-932-0035 i-S10 yokuPhakamisa ipleyiti ene-2 Pin
932-0043 Iipleyiti zokuPhakamisa ezongeziweyo
932-0047 Line Array H-Clamp
Isayinwe ePort Perry, ON. CA – 15 Agasti 2022
UBrock Adamson (uMongameli kunye ne-CEO)
I-ADAMSON SYSTEMS ENGINEERING, Inc.
1401 Scugog Line 6
IPort Perry, eOntario, eCanada
L9L 0C3
T: +1 905 982 0520, F: +1 905 982 0609
I-imeyile: info@adamsonsystems.com
Webindawo: www.adamsonsystems.com
S- Series
Amaxwebhu / Izibonelelo
 |
ADAMSON S10 Line Array System [pdf] Incwadi yokusebenzisa I-S10 Line Array System, i-S10, i-System Array System, i-Array System |
