MW PW M -120 120W Voltage PWM Output LED Keaukaha Owner Manual

Mau voltage PWM kaila puka
Loaʻa ka noi kukui uila e like me IEC61347-2-13
Hana ʻia ʻo PFC hana a me ka hoʻolālā papa II
ʻAʻohe hoʻohana mana hoʻouka <0.5W/ hoʻohana mana kū i ka mana <0.5W(ʻano DA/DA2-type)
Hoʻopili piha ʻia me ka pae IP67
Nā koho hana: 3 in 1 dimming (dim-to-off); DALVDALI-2
He 0.2% ka pae dimming liʻiliʻi no ke ʻano DALI
ʻO ke ola maʻamau> 50000 mau hola a me 5 mau makahiki hōʻoia

Nā noi

ʻO ke kukui uila LED
Ke kukui LED o loko
ʻO ke kukui uila LED
ʻO ke kukui uila LED
ʻOihana kukui
E hoʻokomo i ka "HL" no ka hoʻohana ʻana i ka papa I, ka mahele 2 wahi weliweli (hoʻokaʻawale ʻia).

wehewehe

PWM-120 series mea he 120W AC/DC LED mea hoʻokele e hōʻike ana i ka vol mautagʻO ke ʻano me ka puka PWM kaila, hiki iā ia ke mālama i ka mahana o ka waihoʻoluʻu a me ka homogeneity olino i ka wā e hoʻokele ai i nā ʻano ʻāpana LED āpau. Hana ʻo PWM-120 mai 90 ~ 305VAC a hāʻawi i nā hiʻohiʻona me nā vol helu like ʻoletage ma waena o 12V a me 48V. Mahalo i ka hana kiʻekiʻe a hiki i ka 90.5%, me ka hoʻolālā fanless, hiki i ka moʻo holoʻokoʻa ke hana no -40C ~ +90C hihia wela ma lalo o ka convection ea manuahi. Ua helu ʻia ka moʻo holoʻokoʻa me IP67 i ka pae palekana komo a kūpono i ka hana no ka maloʻo, damp a i ʻole nā wahi pulu. Hoʻolako ʻia ʻo PWM-120 me ka hana dimming e hoʻololi i ke kaʻina hana o ka hoʻopuka, e hāʻawi ana i ka maʻalahi no nā noi LED strips.

Hoʻohālikelike Hoʻohālikelike

OLELO HOOLAHA

HOIKE		PWM-120-12	PWM-120-24	PWM-120-36	PWM-120-48
PUKA	DC VOLTAGE	12V	24V	36V	48V
	UKU ANA	10A	5A	3.4A	2.5A
	MANA LOA	120W	120W	122.4W	120W
	Pāʻālua DIMMING	0 ~ 100%
	PWM FREQUENCY (ʻAno.)	1.47kHz no Blank/DA-Type, 2.5kHz no DA2-Type
	KA HOOPONOPONO, ALA ANA KA MANAWA Kaha.2 Kaha.9	500ms, 80ms / 230VAC a i ʻole 115VAC
	HOLD UP MANAWA (Typ.)	16ms / 230VAC a i ʻole 115VAC
INPUT	VOLTAGE LĀLĀ Nānā.3	90 ~ 305VAC 127 ~ 431VDC (E nānā i ka ʻāpana "STATIC CHARACTERISTIC")
	KA PALAPALA	47 ~ 63Hz
	POWER FACTOR (ʻAno.)	PF> 0.97 / 115VAC, PF> 0.96 / 230VAC, PF> 0.93 / 277VAC @ piha piha (E ʻoluʻolu e nānā i ka ʻāpana “POWER FACTOR (PF) CHARACTERISTIC”)
	KA HUI HARMONIKA HOOLAHA	THD< 20%(@hoʻouka≧60%/115VAC, 230VAC; @hoʻouka≧75%/277VAC) (E nānā i ka ʻāpana "TOTAL HARMONIC DISTORTION")
	EFFICIENCY (Typ.)	88.5%	90%	90%	90.5%
	AC CURRENT (Typ.)	1.3A / 115VAC 0.65A / 230VAC 0.55A / 277VAC
	INRUSH CURRENT (ʻAno.)	COLD START 60A(twidth=520μs ana ma 50% Ipeak) ma 230VAC; No NEMA 410
	MAX. ʻAʻOLE. o PSU ma 16A CIRCUIT BREAKER	4 mau ʻāpana (ka hoʻokaʻawale kaapuni o ke ʻano B) / 6 mau ʻāpana (ka mea hoʻokaʻawale kaʻa o ke ʻano C) ma 230VAC
	LEAKAGE KĀWAI	<0.25mA / 277VAC
	ʻAʻohe Haʻawe/SANDBY Mana Hoʻohana	ʻAʻohe hoʻohana mana haʻahaʻa<0.5w no ke ʻano blank-type; ka hoʻohana mana kū ʻana <0.5W no ke ʻano DA-type/DA2-type
HOOPAKOLO	OIHANA	108 ~ 130% ka mana hoʻopuka helu
		ʻO ke ʻano hiccup, hoʻihoʻi maʻalahi ma hope o ka wehe ʻia ʻana o ke kūlana hewa
	KAAPUNI POKOLE	12V/24V mode hiccup a me 36V/48V pani pani (me ka DA-type/koe wale no DA2-type) Hiccup mode, ho'ōla hou ma hope o ka wehe 'ana i ka hewa (no ka DA2-type wale nō)
	ALOHA VOLTAGE	15 ~ 17V	28 ~ 34V	41 ~ 46V	54 ~ 60V
		E pani i ka o/p voltage, mana hou e ola
	OKA ANA	E pani i ka o/p voltage, mana hou e ola
KA AINA	HANA ANA.	Tcase=-40 ~ +90 ℃ (E ʻoluʻolu e nānā i ka ʻāpana “OUTPUT LOAD vs TEMPERATURE”)
	MAX. KAHIKI TEMP.	Kāleka = + 90
	HUMIDITY HANA	20 ~ 95% RH non-condensing
	HOOLAHA KAU., HUMIDITY	-40 ~ + 80 ℃, 10 ~ 95% RH
	TEMP. HOOLAHA	± 0.03%/℃ (0 ~ 45℃, koe wale 0 ~ 40℃ no 12V)
	HANAU	10 ~ 500Hz, 5G 12min./1cycle, manawa no 72min. kēlā me kēia me nā koʻi X, Y, Z
PALAPALA & EMC	PALAPALA NA KUMU Kaha.5	UL8750 (ʻano "HL") (koe wale no 12DA type), CSA C22.2 No. 250.13-12; ENEC BS EN/EN61347-1, BS EN/EN61347-2-13, BS EN/EN62384 kūʻokoʻa, IP67, BIS IS15885(no PWM-120-12,24 wale nō), EAC TP TC 004,GB19510.1,GB19510.14. XNUMX aponoia; Hoʻolālā e nānā iā BS EN/EN60335-1; Wahi a BS EN/EN61347-2-13 appendix J kūpono no ka pilikia nā mea hoʻonoho
	NA KUMU DALI	IEC62386-101, 102, 207,251 no DA/DA2-Type wale nō, ʻAno mea 6(DT6)
	KUE VOLTAGE	I/PO/P:3.75KVAC; I/P-DA:1.5KVAC; O/P-DA:1.5KVAC
	HOOLAHA KUE	I/PO/P:100M Ohms / 500VDC / 25 ℃/ 70% RH
	EMC EMISSION Kaha.6	Ka mālama ʻana iā BS EN / EN55015, BS EN / EN61000-3-2 Papa C (@ ukana ≧ 60%); BS EN / EN61000-3-3, GB17743 a me GB17625.1, EAC TP TC 020
	EMC IMMUNITY	Hoʻokō i ka BS EN/EN61000-4-2,3,4,5,6,8,11; BS EN/EN61547, pae ʻoihana māmā (ka hoʻonui ʻana i ka palekana Line-Line 2KV), EAC TP TC 020
NA MEA E ae	MTBF	2243.7K hola min. Telcordia SR-332 (Bellcore) ; 228.7K hola min. MIL-HDBK-217F (25 ℃)
	NANA	1916337.5mm (LWH)
	PAKIKI	0.97Kg; 15pcs / 15.6Kg / 0.87CUFT
HOOLAHA	1. ʻO nā ʻāpana āpau ʻAʻole i ʻōlelo kūikawā ʻia ua ana ʻia ma ka hoʻokomo 230VAC, helu ʻia i kēia manawa a me 25C o ka wela ambient. 2. Pono paha e hoʻemi i ka helu helu haʻahaʻa voltages. E ʻoluʻolu e nānā i nā ʻāpana "STATIC CHARACTERISTIC" no nā kikoʻī. 3. Ana ʻia ka lōʻihi o ka manawa hoʻonohonoho i ka hoʻomaka anu. Hiki ke ho'onui i ka manawa ho'onohonoho ke ho'ohuli i ka mea ho'okele. 4. Manaʻo ʻia ka mea hoʻokele ma ke ʻano he ʻāpana e hana pū ʻia me nā mea hana hope. No ka mea e pili ana ka hana EMC ma ka hoʻokomo piha ʻana, pono e hoʻopaʻa hou nā mea hana hana hope i ka EMC Directive i ka hoʻokomo piha ʻana. 5. Hoʻokō kēia moʻo i ka manaʻolana ola maʻamau o >50,000 mau hola o ka hana inā ʻo Tcase, ʻoi aku (tc) kiko (a i ʻole TMP. no DLC), ma kahi o 75Cor ka emi. 6. E ʻoluʻolu e nānā i ka ʻōlelo hoʻohiki ma MEAN WELL's webpaena ma http://www.meanwell.com 7. ʻO ka emi ʻana o ka mahana ambient o 3.5°C/1000m me nā hiʻohiʻona fanless a me 5C/1000m me nā hiʻohiʻona peʻahi no ka hana kiʻekiʻe ma mua o 2000m(6500ft). 8. No kekahi palapala noi a me ka IP wai hōʻoia hana hoʻonoho akahele, e nānā i kā mākou mea hoʻohana manual ma mua o ka hoʻohana. https://www.meanwell.com/Upload/PDF/LED_EN.pdf 9. Ma muli o ka IEC 62386-101/102 DALI mana i ka manawa a me nā hoʻoponopono hoʻopaneʻe, pono ka manawa hoʻonohonoho e hoʻāʻo me kahi mea hoʻokele DALI. hiki ke kākoʻo i ka mana DALI ma ka hana, i ʻole e ʻoi aku ka kiʻekiʻe o ka manawa hoʻonohonoho ma mua o 0.5 kekona no ke ʻano DA. x Hoʻokaʻawale i ke kuleana o ka huahana: No ka ʻike kikoʻī, e ʻoluʻolu e nānā i https://www.meanwell.com/serviceDisclaimer.aspx

HANA ʻIMPAIMA

ʻO ke kaulike Dimming no ka puka kaila PWM
Loaʻa ka hoʻohaʻahaʻa e ka loli ʻana i ke kaʻina hana o ka au i hoʻopuka ʻia.

3 i loko o 1 hana dimming (no Blank-Type)

E noi i kekahi o nā kaʻina hana ʻekolu ma waena o DIM+ a me DIM-: 0 ~ 10VDC, a i ʻole 10V PWM hōʻailona a kūʻē paha.

ʻO ke kumu hoʻohaumia i kēia manawa mai ka lako mana: 100μA (typ.)

◎ Ke noi nei i ka mea hoʻohui 0 ~ 10VDC

◎ Ke hoʻohana nei i ka hōʻailona 10V PWM hoʻohui (ke ala alapine 100Hz ~ 3KHz):

Ke hoʻohana nei i ke kū'ē hoʻohui:

Nānā:

Min. ʻO ke kaʻina hana o ka hoʻopuka i kēia manawa ma kahi o 0.15%, a ʻo ka hoʻokomo dimming e pili ana i 6KΩ a i ʻole 0.6VDC, a i ʻole 10V PWM hōʻailona me 6% kaʻina hana.

Hiki ke hāʻule i lalo i ka 0% ka pōʻaiapili hana o kēia manawa i ka emi ʻana o ka dimming input ma mua o 6KΩ a i ʻole ka liʻiliʻi ma mua o 0.6VDC, a i ʻole 10V PWM hōʻailona me ka pōʻai hana ma lalo o 6%.

DALI Interface (ʻaoʻao mua; no DA/DA2-Type)

E noi i ka hōʻailona DALI ma waena o DA+ a me DA-.
ʻO ka protocol DALI he 16 mau pūʻulu a me 64 mau ʻōlelo.
Hoʻopaʻa ʻia ka hana mua ma 0.2% o ka puka

HAAWINA OUTPUT vs TEMPERATURE

KE OLA

Papa Kuhikuhi

Hōʻike Mechanical

ʻAno Blank
ʻAno DA/DA2

Paipai i ke kuhikuhi piʻi mauna

Palapala Hoʻokomo

Hoʻohui no Blank-type

Hoʻolaha

Ma mua o ka hoʻomaka ʻana i kahi hoʻonohonoho a mālama ʻana paha, e ʻoluʻolu e kāpae i ka lako mana f ‧ mai ka pono. E hōʻoia ʻaʻole hiki ke hoʻopili hou ʻia me ka ʻike ʻole!

E mālama pono i ka ea a puni ka ʻāpana a mai hoʻopaʻa i kekahi mea ma luna. Pono e mālama ʻia kahi ʻokoʻa 10-15 cm inā he kumu wela ka mea pili.
Hiki ke hoʻonui ʻia ka wela o ka ʻāpana o loko a pono e hoʻemi ʻia ka helu ʻana o ka hoʻokuʻu ʻana i kēia manawa.

ʻOi aku ka nui a i ʻole like paha ka helu o kēia manawa o ke kaula kumu mua / lua i ʻāpono ʻia me ko ka ʻāpana. E ʻoluʻolu e nānā i kāna kikoʻī.
No nā mea hoʻokele LED me nā mea hoʻohui wai, e hōʻoia i ka paʻa o ka pilina ma waena o ka ʻāpana a me ke kukui i ʻole e komo ka wai i loko o ka ʻōnaehana.

No nā mea hoʻokele LED dimmable, e hōʻoia i ka hiki i kāu mea hoʻoponopono dimming ke hoʻokele i kēia mau ʻāpana. Pono ka moʻo PWM i ka 0.15mA i kēlā me kēia ʻāpana.
Tc max. ʻike ʻia ma ka lepili huahana. E ʻoluʻolu, ʻaʻole e ʻoi aku ka mahana o ke kiko Tc ma mua o ka palena.

MAI hoʻopili i ka "DIM- i -V".
He kūpono no ka hoʻohana ʻana i loko a i ʻole ka hoʻohana ʻana i waho me ka ʻole o ka ʻike ʻana o ka lā. E ʻoluʻolu e hōʻole i ka hoʻokomo ʻana i ka wai ma mua o 30 mau minuke.
Manaʻo ʻia ka mana mana he ʻāpana e hoʻohana ʻia me nā mea hana hope. No ka mea e hoʻopilikia ʻia ka hana EMC e ka hoʻokomo piha ʻana, pono e hoʻopaʻa hou nā mea hana hope loa i ka EMC Directive i ka hoʻonohonoho piha ʻana.

Palapala / Punawai

MW PW M -120 120W Voltage PWM Output LED Keaukaha [pdf] Palapala a ka mea nona
PW M -120 120W Voltage PWM Output LED Keaukaha, PW M -120, 120W Mau Voltage PWM Output LED Keaukaha, Output LED Keaukaha

Nā kuhikuhi

Palapala Hoʻohana

MW PW M -120 120W Voltage PWM Output LED Keaukaha

Nā hiʻohiʻona