Idatha ye-V2406C
Umhlahlandlela Wokufaka Ngokushesha
Amakhompyutha Ashumekiwe
Inguqulo 1.2, Septhemba 2021
Ulwazi Lokuxhumana Lokusekela Lobuchwepheshe
www.moxa.com/support
P/N: 1802024060042
Kuphelileview
Amakhompuyutha ashumekiwe we-V2406C Series asekelwe kuma-Intel® 7th kanye ne-8th Gen processors futhi anezimbobo ze-serial ezingu-4 RS-232/422/485, izimbobo ezimbili ze-LAN, nezimbobo ezi-4 ze-USB 3.0. Amakhompyutha e-V2406C aphuma nokuphumayo kwe-VGA okungu-1 kanye nembobo ye-HDMI engu-1 enokwesekwa okungu-4k. Amakhompyutha athobela i-EN 50155:2017 imininingwane, efaka izinga lokushisa lokusebenza, ivolthi yokufaka amandlatage, ukuhlinza, i-ESD, nokudlidliza, okuzenza zifanelekele izinhlelo zokusebenza ezihlukene zezimboni.
Imbobo ye-mSATA, izixhumi ze-SATA, nezimbobo ze-USB zinikeza amakhompyutha we-V2406C ukwethembeka okudingekayo ezinhlelweni zezimboni ezidinga ukunwetshwa kwesitoreji sokugcina idatha. Okubaluleke kakhulu, amakhompyutha e-V2406C eza namathreyi angu-2 okugcina okufaka imidiya eyengeziwe yokugcina, njenge-hard disk noma amadrayivu e-solid-state, asekela ukushintshashintsha okushisayo ukuze kufakwe indawo yesitoreji esilula, esisheshayo, nesilula. Isitoreji ngasinye sine-LED yayo ekhombisa ukuthi imojuli yesitoreji ixhunyiwe yini.
Uhlu Lokuhlola Iphakheji
Iphakheji ngayinye yemodeli yesistimu eyisisekelo ithunyelwa nezinto ezilandelayo:
- Ikhompyutha eshumekiwe ye-V2406C Series
- Ikhithi yokufaka udonga
- 2 amathreyi e-HDD
- Izikulufu eziyi-8 zokuvikela amathreyi e-HDD
- Ilokha yekhebula le-HDMI
- Umhlahlandlela wokufaka okusheshayo (uphrintiwe)
- Ikhadi lewaranti
Ukufakwa kwe-Hardware
Ngaphambili View
Ngemuva View
Ubukhulu
Izinkomba ze-LED
Ithebula elilandelayo lichaza izinkomba ze-LED ezitholakala kumaphaneli angaphambili nangemuva ekhompyutha ye-V2406C.
| Igama le-LED | Isimo | Umsebenzi |
| Amandla (Inkinobho yamandla) | Okuhlaza | Amandla avuliwe |
| Valiwe | Akukho okokufaka kwamandla noma elinye iphutha lamandla | |
| I-Ethernet (100 Mbps) (1000 Mbps) | Okuhlaza | Ivuliwe: Isixhumanisi se-Ethernet esingu-100 Mbps Ukucwayiza: Ukudluliswa kwedatha kuyaqhubeka |
| Okuphuzi | Ivuliwe: Isixhumanisi se-Ethernet esingu-1000 Mbps Ukucwayiza: Ukudluliswa kwedatha kuyaqhubeka |
|
| Valiwe | Isivinini sokudluliswa kwedatha ku-10 Mbps noma ikhebuli ayixhunyiwe | |
| I-Serial (TX/RX) | Okuhlaza | Tx: Ukudluliswa kwedatha kuyaqhubeka |
| Okuphuzi | Rx: Ukuthola Idatha | |
| Valiwe | Akukho ukusebenza | |
| Isitoreji | Okuphuzi | Idatha ifinyelelwa kumadrayivu e-mSATA noma e-SATA |
| Valiwe | Idatha ayifinyelelwa kumadrayivu esitoreji |
Ukufaka i-V2406C
Ikhompyutha ye-V2406C iza nabakaki ababili abafaka udonga. Namathisela amabakaki kukhompuyutha usebenzisa izikulufu ezine ohlangothini ngalunye. Qinisekisa ukuthi amabakaki okukhweza anamathiselwe kukhompuyutha ye-V2406C ngendlela eboniswe esithombeni esilandelayo.
Izikulufu eziyisishiyagalombili zabakaki abafakwayo zifakiwe kuphakheji yomkhiqizo. Ziyizikulufu ezijwayelekile ze-IMS_M3x5L futhi zidinga itorque engu-4.5 kgf-cm. Bheka umfanekiso olandelayo ukuze uthole imininingwane.
Sebenzisa izikulufu ezimbili (kunconywa i-M3*5L ejwayelekile) ohlangothini ngalunye ukuze unamathisele i-V2406C odongeni noma ekhabetheni. Iphakheji yomkhiqizo ayifaki izikulufo ezine ezidingekayo ukuze kunamathiselwe ikhithi yokufaka odongeni; zidinga ukuthengwa ngokwehlukana. Qinisekisa ukuthi ikhompuyutha ye-V2406C ifakiwe ngendlela eboniswe esithombeni esilandelayo.
Ukuxhuma Amandla
Amakhompyutha e-V2406C ahlinzekwa ngezixhumi zokufaka amandla e-M12 kuphaneli yangaphambili. Xhuma izintambo zamandla kuzixhumi bese uqinisa izixhumi. Cindezela inkinobho yamandla; i-Power LED (enkinobho yamandla) izokhanya ukukhombisa ukuthi amandla anikezwa ikhompuyutha. Kufanele kuthathe cishe amasekhondi angu-30 kuya kwangu-60 ukuze isistimu yokusebenza iqedele inqubo yokuqalisa.
| Phina 1 | Incazelo |
| 2 | V+ |
| 3 | NC |
| 4 | V- |
| NC |
Incazelo yokufaka amandla inikezwe ngezansi:
• Amapayipi amakhulu e-DC anesilinganiso somthombo wamandla esingu-24 V @ 2.74 A; 100 V @ 0.584 A, kanye nobuncane obungu-18 AWG.
Ukuze uthole ukuvikelwa kokuhlinza, xhuma isixhumi esiphansi esingaphansi kwesixhumi samandla nomhlaba (umhlabathi) noma indawo yensimbi.
Ixhuma Izibonisi
I-V2406C ine-interface ye-VGA engu-1 eza nesixhumi sowesifazane se-D-Sub 15-pin. Ngaphezu kwalokho, enye i-interface ye-HDMI nayo inikezwa kuphaneli yangaphambili.
QAPHELA: Ukuze ube nokusakaza kwevidiyo okuthembeke kakhulu, sebenzisa izintambo ze-premium, ezinesitifiketi se-HDMI.
Izimbobo ze-USB
I-V2406C iza nezimbobo ezi-2 ze-USB 3.0 kuphaneli yangaphambili nezinye izimbobo ezi-2 ze-USB 3.0 kuphaneli engemuva. Izimbobo ze-USB zingasetshenziselwa ukuxhuma kwamanye ama-peripheral, njengekhibhodi, igundane, noma amadrayivu e-flash ukuze kunwetshwe umthamo wesitoreji wesistimu.
Amachweba we-Serial
I-V2406C iza namachweba we-serial angama-4 we-RS-232/422/485 kuphaneli yangemuva. Ichweba loku-1 kanye ne-Port 2 yichweba le-UART elingalodwa. Amachweba asebenzisa izixhumi zabesilisa ze-DB9.
Bheka ithebula elilandelayo ukuze uthole imisebenzi yokuphina:
|
Phina |
RS-232 | RS-422 | RS-485 (4-izintambo) |
RS-485 (2-izintambo) |
|
1 |
I-DCD |
I-TxDA(-) |
I-TxDA(-) |
– |
|
2 |
I-RxD |
I-TxDB(+) |
I-TxDB(+) |
– |
|
3 |
I-TxD |
I-RxDB(+) |
I-RxDB(+) |
IdathaB(+) |
|
4 |
I-DTR |
I-RxDA(-) |
I-RxDA(-) |
IdathaA(-) |
| 5 | GND | GND | GND |
GND |
|
6 |
I-DSR |
– |
– |
– |
|
7 |
I-RTS |
– |
– |
– |
|
8 |
I-CTS |
– |
– |
– |
Izimbobo ze-Ethernet
I-V2406C inamachweba angu-2 100/1000 Mbps RJ45 Ethernet anezixhumi ze-M12 kuphaneli yangemuva. Bheka ithebula elilandelayo ukuze uthole imisebenzi yokuphina:
| Phina | Incazelo |
| 1 | I-DA+ |
| 2 | DA- |
| 3 | DB+ |
| 4 | DB- |
| 5 | DD+ |
| 6 | DD- |
| 7 | DC- |
| 8 | I-DC+ |
Okokufaka Kwedijithali/Okukhiphayo Kwedijithali
I-V2406C iza nezinto eziyisithupha zedijithali kanye nezimbili eziphumayo zedijithali kubhulokhi yetheminali. Bheka izibalo ezilandelayo ukuze uthole izincazelo zephinikhodi nezilinganiso zamanje.
| Okokufaka Kwedijithali Oxhumana naye omile Umqondo 0: Kufushane ukuya phansi Umqondo 1: Vula Ukuthintana Okumanzi (DI ukuya ku-COM) I-Logic 1: 10 kuya ku-30 VDC I-Logic 0: 0 kuya ku-3 VDC |
Imiphumela Yedijithali Isilinganiso samanje: 200 mA isiteshi ngasinye Voltage: 24 kuya ku-30 VDC |
Ukuze uthole izindlela ezinemininingwane zokufaka izintambo, bheka ku-V2406C Hardware User's Manual.
Ifaka Amadiski Esitoreji
I-V2406C iza namasokhethi amabili okugcina, okuvumela abasebenzisi ukuthi bafake amadiski amabili okugcina idatha.
Landela lezi zinyathelo ukufaka i-hard disk drive.
- Khipha ithreyi yokugcina ephaketheni lomkhiqizo.
- Beka idrayivu yediski kuthreyi.
- Vula i-disk kanye nokuhlelwa kwethreyi nxazonke view ohlangothini olungemuva lwethreyi. Bopha izikulufu ezine ukuze uvikele idiski ethreyini.
- Khumula isikulufu sembozo yembobo yesitoreji bese uslayida ikhava phansi ukuze ufinyelele indawo.
- Thola indawo yesitimela se-disk tray.
- Faka ithreyi ukuze iqondane namareyili ezinhlangothini zombili bese uslayida ithreyi ku-slot.
Ukuze ukhiphe ithreyi, vele udonsele i-clutch kwesokudla bese ukhipha ithreyi.
Ukuze uthole imiyalelo yokufaka amanye amadivaysi e-peripheral noma amamojula angenawaya, bheka Imanuwali Yomsebenzisi Wezingxenyekazi Zekhompyutha ye-V2406C.
QAPHELA: Le khompuyutha ihloselwe ukufakwa endaweni enomkhawulo kuphela. Ngaphezu kwalokho, ngenxa yezizathu zokuphepha, ikhompuyutha kufanele ifakwe futhi isingathwe kuphela ochwepheshe abaqeqeshiwe nabanolwazi.
QAPHELA: Le khompyutha yakhelwe ukuthi ihlinzekwe ngezinto ezisetshenziswayo ezisohlwini ezilinganiselwe ku-24 kuya ku-110 VDC, ubuncane obungu-2.74 kuya ku-0.584 A, kanye ne-minimumTma=70˚C. Uma udinga usizo lokuthenga i-adaptha yamandla, xhumana nethimba labasekeli bezobuchwepheshe be-Moxa.
QAPHELA: Le yunithi kuhloswe ngayo ukuthi ihlinzekwe yi-DC Busway, okukhiphayo okulinganiselwe ku-24 kuya ku-110 VDC, ubuncane obungu-2.74 A, kanye nomthombo wamandla we-DC onevolumu.tagukubekezelelana kuka-+20% no-15%. Okwesiboneloample, umthombo wamandla Osohlwini lwe-UL ofanele ukusetshenziswa kokuncane okungu-Tma 75°C, ukalwe ku-24 kuya ku-110 VDC kanye no-2.74 A ubuncane.
Ukushintsha Ibhethri
I-V2406C iza nembobo eyodwa yebhethri, efakwe nebhethri ye-lithium enemininingwane engu-3 V/195 mAh. Ukushintsha ibhethri, landela lezi zinyathelo ezingezansi:
- Ikhava yebhethri itholakala kuphaneli yangaphambili yekhompyutha.
- Khumula izikulufu ezimbili kukhava yebhethri.
- Susa ikhava; ibhethri linamathiselwe kwikhava.
- Hlukanisa isixhumi bese ukhipha izikulufu ezimbili epuleti lensimbi.
- Miselela ibhethri elisha kusibambi sebhethri, beka ipuleti lensimbi ebhethrini bese ubophela izikulufu ezimbili ziqine.
- Xhuma kabusha isixhumi, beka isibambi sebhethri endaweni, futhi uvikele ikhava yesikhala ngokuhlanganisa izikulufu ezimbili kukhava.
QAPHELA: Qiniseka ukuthi usebenzisa uhlobo olulungile lwebhethri. Ibhethri elingalungile lingase lidale umonakalo wesistimu. Xhumana nabasebenzi bosekelo lwezobuchwepheshe bakwa-Moxa ukuze uthole usizo, uma kunesidingo.
Amadokhumenti / Izinsiza
 |
I-MOXA V2406C Series Intel 7th Gen Core processor Railway eshumekiwe amakhompyutha [pdf] Umhlahlandlela wokufaka I-V2406C Series, i-Intel 7th Gen Core Processor Railway eshumekiwe amakhompyutha, i-V2406C Series Intel 7th Gen Core Processor Railway amakhompyutha ashumekiwe. |
