ZOOM P2 Editor Installation Guide

ZOOM P2 Editor Installation Guide

P2 Editor

ZOOM CORPORATION does not bear liability for any damages or third-party claims arising from the use of the software, whether directly or indirectly. Unauthorized redistribution, sale, leasing, renting, alteration, or reverse engineering of the software is prohibited. Features and specifications of the software and the contents of the documentation may be changed in future without notice.
(C) 2025 ZOOM CORPORATION. All Rights Reserved.
Copying or reprinting this manual in part or in whole without permission is prohibited.
Microsoft and Windows are trademarks of the Microsoft group of companies.
Mac is a trademark of Apple Inc.
Note: All trademarks and registered trademarks in this document are for identification purposes only and are not intended to infringe on the copyrights of their respective owners.
Proper display is not possible on grayscale devices.
The illustrations in these instructions might differ from actual screens.

For Windows

Installation and updating
If the application has already been installed, following these installation procedures will update it by reinstalling
Disconnect the product from the computer before installation/uninstallation.
Close all other running applications before launching this application.

1. Download the Windows file.
   Download the ZIP file that contains the installer from the P2 support & downloads page (zoomcorp.com/help/p2).
2. Extracting the ZIP file.
   Select the folder where you downloaded the ZIP file, and click “Extract All”. The ZIP file will be extracted.
3. Double-click the installer file.
4. Click “Next >”.
5. This opens the License Agreement. After carefully reviewing the content, check “I accept the terms in the license agreement” if you accept it, and click “Install”.
6. Click “Next >”.
7. Click “Next >”.
8. Click “Next >”.
   When “Do you want to allow this app to make changes to your device?” appears in a pop-up, select “Yes”.
9. This starts installation.
10. Click “Close” to complete installation.

Confirming installation

Follow the procedures below to check whether or not the application has been installed.

1. Open the Start menu.
2. Open the “ZOOM” folder, and click this application.
3. Check the version.
   Confirm that it is the latest version.

HINT
Try the following if you cannot find the application.

• Check the name of the installed application.
• Search in the search box on the taskbar.
• Install the application again.

Uninstallation

1. Right-click the Start menu and open Settings.
2. Select Installed apps from Apps.
3. Select the app from Installed apps.HINT
   Try the following if you cannot find the application.
   ・ Check the name of the installed application.
   ・ Change Sort by to Install date before searching.
   ・ Install the application again.
4. Select Uninstall to execute uninstallation.
   When “Do you want to allow this app to make changes to your device?” appears in a pop-up, select “Yes”.

For Mac

Installation and updating
If the application has already been installed, following these installation procedures will update it by reinstalling it.
Disconnect the product from the computer before installation/uninstallation.
Close all other running applications before launching this application.

1. Download the Mac file.
   Download the ZIP file that contains the installer from the P2 download page.
2. Open the file.
   After downloading, click ① “Downloads”, which appears at the bottom of the screen by default. Then, click
   ②. This will open the dmg file.
3. Drag the P2 Editor file and drop it into the Applications folder.

Confirming installation

Follow the procedures below to check whether or not the application has been installed.

1. From the Applications folder, open the “P2 Editor”.
2. Check the version.
   Confirm that it is the latest version.

Uninstallation

1. Open the Application folder.
2. Drag the “P2 Editor” to the trash or select it and choose File > Move to Trash.

©2025 ZOOM CORPORATION Z2I-5598-03