Home » ZKTECO » ZKTeco LM-2805 Access Control Kit Instruction Manual 
ZKTeco LM-2805 Access Control Kit 
Product description
- Can withstand 200kg-220kg pulling force;
- A variety of installation methods, according to different installation scenarios, U, L, Z, ZL mounting brackets are available;
- Can be installed in iron doors, wooden doors and glass doors;
- With signal feedback function;
Parameters
| Input voltage |
DC12V |
| Working current |
480m A±5 % |
| Tensile force range |
200kg±5 % |
| Weight |
1.77kg |
| Lock body size |
250x 47 x 25.5mm |
| Iron plate size |
180x 38x 11mm |
| Interface Description |
V + – positive powe r supply; V – – negative power supply;
Feedback signal output: NO/COM/NC |
Backup power
Parameters
| Operating Voltage |
12V – 7.5AN |
| Cyclic Use |
14.50 – 14.90V |
| Standby Use |
13.50 – 13.80V |
| Initial Current |
Less than 2.25A |
TLEB102 Exit button
Product description
The TLEB102 is a new infrared sensor door switch with a compact size.Exquisite appearance,economical application etc., widely used in access control security.
Parameters
| Switching voltage |
DC 9 ~ 16V |
| Rated current |
2A |
| Operating temperature |
-20°C ~ +50°C |
| storage temperature |
-20°C ~ +65°C |
| Working humidity |
10%-90% |
| shell material |
SUS304 stainless steel material |
| Infrared sensing distance |
2-10CM |
| Size |
Length 115* width 70* height 38mm |
Wiring definition
| Wiring color |
Description |
| Red |
12V |
| Black |
GND |
| Yellow |
N0 |
| White |
COM |
| Green |
NC |
Power supply
Product description
- The output ripple is small and the high frequency interference is small;
- The product structure is simple and convenient for maintenance;
- Pure copper transformer coil, stable operation;
- With overload protection function;
- Can be connected to the backup battery;
Parameters
| Input |
AC 220V 50Hz |
| Output |
DC 12V |
| Timer |
0 — 15S |
| Momentary current |
5A |
| persistent current |
2A |
Packing list
| Product |
Quantity |
| Exit switch |
X1 |
| Electromagnetic lock |
X1 |
| Uninterrupted power supply |
X1 |
| Backup power |
X1 |
| Bracket |
X2 |
Lock Bracket
Product description
Two brackets (L-shaped and Z shaped) can be used for lock installation.It can be installed in iron doors, wooden doors.
Parameters
| Finished for Shell |
Anodized Aluminum |
| Opening Mode |
90-degree door |
| L-shaped Bracket Size |
50*50*30 mm |
| Z-shaped Bracket Size |
180*50*50 mm |
Documents / Resources
References
