ATMS2001Z Smart Timer
Zigbee Smart Timer
1. Download and Install Mobile App:
Connect your phone to local WiFi first. Use your phone to scan the QR code below to Download and install the App.
Operating Instructions
2. Register Account
Zigbee Smart Timer
5. Count down timer
Operating Instructions
3. Confirm that the Gateway is active or add the Gateway in the App first. For details on adding the Timer to the Gateway, See Instructions Below.
4. Add New Device
Connect the Device with the mains supply (100-250VAC), for the connection diagrams see section 14.
Press and hold the button for about 5 seconds until the Green LED light blinks fast. 6.
* After holding the button for 5 seconds, if the LED light is red, press the button again until the green light blinks.
Set scheduled programs.
CIic k “Timer” in
7. Circulate Function (Allows user to choose days and times to cycle power on and off, i.e., On for 30 Min and Off for 5min between 6am and 6pm)
1
1
2
Zigbee Smart Timer
8. Modify Device Name
9. Sha re Device
Operating Instructions
and confirm.
Zigbee Smart Timer
Operating Instructions
13. Specifications
· Rated Voltage: 100-240VAC 50-60Hz. · Rated Current: 20A 250VAC (Cos= 1) · Contact Configuration: 1NO (S PST-NO) · Wi-Fi Frequency cy: 2.4 GHZ · Mounting: DIN RAIL 35 mm (EN60715) · Ambient temperature range: (-10°C to 60°C) · Can set 30 ON/OFF programs per day or per week. · Count down time, from 1 Min to 23 hours 59 Mins. · lf the product is disconnected from the network the timer retains all programs set up by Mobile App
and works according to the set programs with memory function,
· With memory function, When the product contact is in the close state, after the power failure, and then call, the product contacts keep the close state.
· Can be controlled by tactile switch from terminal A1 and A2 · Can be shared with 20 users by Mobile App.
10. Create Group
11. Add to Home Screen
3
4
Documents / Resources
 | ZigBee ATMS2001Z Smart Timer [pdf] Instruction Manual ATMS2001Z, ATMS2001Z Smart Timer, Smart Timer, Timer |
