BD701 Solar Wireless Backup Camera System
“
Product Specifications
- Brand: ZEROXCLUB
- Model: BD701
- Wireless Backup Camera System
- Solar-powered
- 7-inch Monitor with Built-in 32GB memory card
Product Usage Instructions
Before Using
To ensure a smooth experience, verify that all items listed in
your order are included and undamaged. Contact customer service at
sales@uszeroxclub.com if anything is missing or defective.
Charge the Battery
Use the Type-C cable for primary charging. Solar charging is
supplementary and may not fully recharge the battery on its
own.
What’s in the Box
- 7-inch Monitor (with Built-in 32GB memory card)
- Backup Camera
- 12V Car Charger
- Suction Cup Mount
- USB Wall Charger
- Power Cable for Monitor
- Antenna x2
- USB-C Cable
About Camera
- Power On/Off: Quick press power button to turn
on, hold for 7-10 seconds to turn off manually. Use car charger
switch for auto power option. - Indicator Light: Red light for charging, blue
light for battery level. Blue light indicates battery status. - Charging Methods: Supports USB-C and Solar
charging. USB-C recommended as primary method due to solar panel
limitations. - Solar Panel Charging: Supplementary power
source. Use Type-C cable for reliable charging and solar as
backup.
Installation
Mount the antenna to the monitor and camera. Follow the
installation instructions provided in the manual for proper
setup.
Frequently Asked Questions (FAQ)
Q: What should I do if the camera battery is low?
A: Charge the camera as soon as possible using either the USB-C
cable or solar charging method to ensure continued
functionality.
Q: Can I use the camera in extreme temperatures?
A: Extreme temperatures may reduce battery efficiency. In
winter, keep the camera charged above 50% for optimal
performance.
“`
ZEROXCLUB Instructions Manual
Solar Wireless Backup Camera System Model: BD701
Any questions or suggestions please send an email to customer service via sales@uszeroxclub.com
ZEROXCLUB Instructions Manual
TABLE OF CONTENTS
WARRANTY ……………………………………………………………………………… 2 BEFORE USING ……………………………………………………………………….. 2 CHARGE THE BATTERY ………………………………………………………….. 3 WHAT IS IN THE BOX ………………………………………………………………. 3 ABOUT CAMERA ……………………………………………………………………… 4 INSTALLATION ………………………………………………………………………….7
Installation of the Antenna ………………………………………………………..7 Installation of the Camera ……………………………………………………….. 7 Installation of the Monitor ………………………………………………………… 8 OPERATING INSTRUCTION ……………………………………………………..8 Monitor Buttons ………………………………………………………………………. 8 Main Screen Interface …………………………………………………………….. 9 Settings Operation ………………………………………………………………… 10
Menu …………………………………………………………………………………..10 PAIRING Operation ……………………………………………………………. 10 PICTURE Operation …………………………………………………………… 12 SYSTEM Operation ……………………………………………………………. 13 PLAY Operation …………………………………………………………………. 13 RECORD Operation …………………………………………………………….14 TROUBLESHOOTING …………………………………………………………….. 14 FAQS ……………………………………………………………………………………….17 SAFETY INFORMATION …………………………………………………………. 19 SPECIFICATIONS …………………………………………………………………… 20
ZEROXCLUB Instructions Manual
WARRANTY
Thank you for choosing ZEROXCLUB! We stand behind our products with an 18-month free warranty and lifetime technical support–ensuring your backup camera performs flawlessly for years to come. If you encounter any issues, need troubleshooting assistance, or simply have questions, our dedicated support team is here to help. Every message receives a reply within 24 hours, and we’ll do everything possible to resolve your concern to your satisfaction. For warranty claims, replacements, or technical support, please contact us immediately at: Email: sales@uszeroxclub.com Save this address for quick access–we’re always ready to assist!
BEFORE USING
To ensure a smooth experience, please verify that all items listed in your order are included and undamaged. If anything is missing or defective, contact us immediately at sales@uszeroxclub.com for fast assistance. For the quickest resolution: Include your Amazon order number Attach photos of the damaged/missing item(s) This helps us resolve your issue efficiently. We appreciate your patience and cooperation!
2
ZEROXCLUB Instructions Manual
CHARGE THE BATTERY
Fully Charge the battery before use via the supplied USB cable. 1. Connect the supplied USB-C cable to the Type-C port of the camera. 2. Plug the USB-C cable into the USB wall charger and Plug your charger into an outlet. The red indicator light will be on when your camera is charging. 3. It takes about 6 hours to charge. When battery is fully charged, the red indicator light will turn off. If the battery is drained before charging, the charging time needs to be extended. 4. Close Type-C door securely to ensure waterproof integrity. NOTICE Turn the camera off while charging. Otherwise the camera will consume power while charging, resulting in a longer charging time. NOTICE The Type-C Charging port is not waterproof, please cover it back after charging. Otherwise the camera may not work if it gets water in it.
WHAT IS IN THE BOX
7-inch Monitor (Build-in 32GB memory card)
3
Backup Camera
ZEROXCLUB Instructions Manual
12V Car Charge
Suction Cup Mount
USB Wall Charger
Power Cable for Monitor
Antenna*2
ABOUT CAMERA
USB-C Cable
1. Power On/Off Instructions: Quick press the power button to turn on the camera. Hold the button (7-10 seconds) to turn it off manually.
Auto Power Option (Recommended for Convenience): Turn on the camera first. Use the car charger switch to cut power to the monitor. The camera will auto-off in ~1 minute. It will auto-on in ~1 minute when power is restored.
4
ZEROXCLUB Instructions Manual
*This automatic feature eliminates manual operation for daily use.
2. Camera Indicator Light
The red light is the charging indicator, it will light up when the
camera is charging, it will turn off when charging is finished or
uncharged. The blue light indicates the battery level. The blue light
will illuminate when the camera is turned on.
Steady on
Turn on / Battery about 67% to 100% full
Steady on
Turn on / Battery about 34% to 66% full
Steady on
Turn on / Battery about 1% to 33% full
Blinks blue Low battery. Charge as soon as possible.
Steady on
No Lights On
The camera is turned off and charging. When charging is finished, the red lamp turns off. Turn off / Camera is off and fully charged / Battery is drained
3. Two Charging Methods The camera supports USB-C charging (5V DC charging) and Solar
charging. Due to the inefficiency of solar charging caused by the
limitation of solar panel area, it is best to use Type-C charging as
the primary charging method. Note that charging times increase at low or
high temperatures.
4. Solar Panel Charging Information The included solar panel supplementary power. However, due to its compact size, it cannot fully recharge the battery on its own– especially with continuous use. For optimal performance: Primary Charging: Use the included Type-C cable for full, reliable charging Solar Assistance: The panel helps maintain battery levels when sunlight is available Tip: For best results, use solar charging as a backup to your regular Type-C charging routine.
5
ZEROXCLUB Instructions Manual
NOTICE 1. Power Management · Power off the camera when not in use (e.g., overnight) to conserve energy. · Always fully charge the battery via the included USB-C cable before first use.
2. Charging Recommendations · Primary Charging: Regularly recharge via USB-C (especially in winter) · Low Battery Alert: Charge immediately when the battery indicator drops below 20%. · Storage: Recharge every 60 days if unused; charge fully 1-2 days before planned use.
3. Solar Panel Usage · Extends operational time but cannot fully replace wired charging. · For best results, ensure direct sunlight exposure (angled at 30°-45°).
4. Vehicle Power Safety · If hardwired to a constant 12V outlet, unplug the monitor when parked to prevent vehicle battery drain. · When using portable power: Minimum 9,600mAh capacity required Use only 5V/2A output ports
5. Installation Tips · Signal Test: Temporarily mount both units and test reception in multiple locations before final placement. · Optimal Positioning: Camera: Mount 20″ above ground to reduce debris interference Monitor: Avoid metallic obstructions between components
6
ZEROXCLUB Instructions Manual
* Extreme temperatures may reduce battery efficiency. For winter use, keep the camera charged above 50%.
INSTALLATION
Installation of the Antenna
Mount the antenna to monitor
Mount the antenna to camera
Installation of the Camera
The camera has a strong magnetic base that easily adheres to metal surfaces. You just attach it where you want and then adjust the camera angle as needed.
NOTICE
a. Aluminum and fiberglass magnets vehicle body is weakly attracted to a magnetic base. We recommend that you can purchase a metal plate and bolts from the local hardware store. After cutting it down to size and used the bolts that you through-bolted to the vehicle.
b. Take the camera off when not in use and put it in a safe place to prevent it from being stolen.
7
ZEROXCLUB Instructions Manual
Installation of the Monitor
1.Clean both the mounting surface and suction cup with isopropyl alcohol before installation Press firmly for 30 seconds to create a strong seal, making sure no air is trapped, then press the locker to lock. 2.Plug the monitor into the cigarette lighter to power for the monitor.
You can also use DC pigtails power cord to power your monitor. (1)Connect Red wire to ACC power(which is the gear switch before starting up the car’s motor).Vehicle turns on, monitor turns on automatically,Vehicle turns off, monitor will turn off. (2)Connect Black wire to Negative Power/Ground/Sheet Metal. NOTICE Do not allow water to enter the LCD Display.
OPERATING INSTRUCTION
Monitor Buttons
Parking Guidelines button: Turn on/off the parking guidelines Decrease/Brightness Adjustment/Flip button: Select forward in Menu operation. In the non-menu panel, press to reduce brightness or press and hold for 5S to rotate.
8
ZEROXCLUB Instructions Manual
Increase/Brightness Adjustment/Recording button: Select backward in menu operation. In the non-menu panel, press to increase brightness or press and hold for 5S to star/stop recording. Menu/Return button: Press to access menu or return to the previous panel.
Channel Switch/Confirm button: Press to switch camera channel. Confirm in menu operation.
Putting the monitor on standby and waking it up
NOTE: (1) The menu main panel won’t bring up while monitoring in split-screen mode. Please press the SEL button to switch it to full screen before using the M button to enter the menu panel. Otherwise, the M button won’t work. (2) The button is not working during playback of the video files. (3) Re-start recording the second file when you switch channels. (4) The content displayed on the screen is the content recorded by the system. (5) The M button cannot be operated to access the menu panel if the system is recording. Please press OK first to stop recording. (6) If everything is backwards, press and hold the – button a few seconds can rotate the screen.
Main Screen Interface
(1)
Signal: It means the strength of the signal between the camera and
the monitor.
(2)
CAM #1/2: The channel number is shown on the top left of the
screen. Press the SEL button to switch the camera channel.
(3)
Battery: This sign represents the remaining battery power of the
camera. You can check the battery level in the display.
(4)
Rewrite: When this sign is displayed on the screen, it means the
rewrite function is turned on. And it will automatically overwrite the previous
videos when the memory card is full. (You could turn on/off it via MENU RECORD ON/OFF.)
(5)
Memory card: This sign is displayed in the top right of the screen
to indicate that an memory card is inserted. If the system does not recognize
9
ZEROXCLUB Instructions Manual
the memory card, try reinserting or formatting it.
(6)
REC: The
will shown in red in the top center of the screen while
recording video. If there is a problem with the recording, please try to format
the memory card. Press and hold the + button for 5S to star/stop recording..
(7)
Unpaired: If this sign is displayed in the upper left of the screen,
this channel is not yet paired with the camera.
(8) Camera Charging Indicator
(9)
Battery exhausted: Turn camera off and recharge battery.
Settings Operation
Menu
There are eight primary menu selections. Selected menu items are highlighted in yellow. Settings for Pairing/Picture/Mir-flip/ System/ Play/ Record. Use the Function Increase button or Function Decrease button to select the menu item.
Sub-menu items may be highlighted in red.
NOTICE Pressing the M button won’t bring up the main menu when in
split-screen mode or recording mode. To return from any selection, press the M button or wait for a timeout.
PAIRING Operation
The cameras have been paired in the factory for QC testing. If it
10
ZEROXCLUB Instructions Manual
does not paired, manually re-pair the camera.
How to Pair Two Cameras Prepare the System: Power OFF all cameras and the monitor. Pair Camera 1: Turn ON the monitor. Press the SEL button (channel switch button) to select CAM1. Press M to enter Menu Select “Pairing” A 30-second countdown will begin. Turn ON Camera 1 during the countdown Live feed should appear on CAM1. Pairing successful when the image appears. Pair Camera 2: Press the SEL button (channel switch button)to select CAM2. Press M to enter Menu Select “Pairing” Countdown begins again. Turn ON Camera 2 Live feed should appear on CAM2. Pairing successful when the image appears.
NOTICE
a. If no picture displayed after pairing, please power-off again the camera and retry pairing steps.
b. The pairing must be completed within 30 seconds, otherwise, you need to retry pairing steps.
c. Fully charge the camera with a Type-C cable before first use. Turn off the camera power before charging,otherwise the camera will consume power while charging. Turn off camera when not in use to hold battery charge.
d. Press the power button once to turn on the camera; Press and hold the power button to completely turn off the camera.
e. This is easiest done with the camera and monitor close to each other, as you have a limited time to pair the screen and camera together. (within 3 feet)
f. Ensure that the antennas have been installed for both the monitor and the camera
11
ZEROXCLUB Instructions Manual
g. Turn off all cameras before pairing and make sure they are charged with at least 1 bar. Only power up one camera when pairing and pair it at a time.
h. If the camera is powered on all the time during the pairing process, there is no picture displayed as well.
i. After successful pairing, if the current channel does not display picture, please check other channels.
.
PICTURE Operation
1) Press M button to enter menu interface. 2) Press + or – to select PICTURE. Press SEL to confirm. 3) Press + or – to select BRIGHTNESS / CONTRAST / HUE ,
press SEL to confirm. Press + or – to adjust settings. 4) After all settings are done, press M to return to previous panel,
press it again to exit the menu.
Note: Please note that the “Volume” function is disabled. The system is unable to record and playback sound.
MIR-FLIP Operation
You can flip the image to front view, mirror view or inverted view according to your needs. There are four options to flip the image on the monitor. The image cannot be rotated by 90°. 1) Press M button to enter menu interface. 2) Press + or – to select MIR-FLIP. Press SEL to confirm.
12
ZEROXCLUB Instructions Manual
3) Press + or – to select NORMAL / MIRROR / FLIP / MIR-FLIP, press SEL to confirm.
4) After all settings are done, press M to return to previous panel, press it again to exit the menu.
SYSTEM Operation
1) Press M button to enter menu interface. 2) Press + or – to select SYSTEM. Press SEL to confirm. 3) Press + or – to select TIME / LANGUAGE / AUTO-DIM /
P-LINE / DEFAULT, press SEL to confirm. Press + or – to adjust settings. 4) After all settings are done, press M to return to previous panel, press it again to exit the menu.
AUTO-DIM When this option is “ON”, the monitor will automatically increase the brightness when there is low light. Or you can set this option to “OFF”. Auto Dimming Function.
DELAY TIME Ignore this function P-LINE Turn ON/OFF parking line. Or you can press to turn it ON/OFF. The parking guide line need to be controlled individually on each camera screen. NOTICE If the P-LINE function is not turned on for other camera channels, the parking guideline will not be displayed.
DEFAULT Restore default settings. When you turn it on, the camera and monitor need to be re-paired, please refer to the “Pairing Steps”.
PLAY Operation
13
ZEROXCLUB Instructions Manual
1) Press M button to enter menu interface. 2) Press + or – to select PLAY. Press SEL to confirm. 3) Press + or – to select the second folder, press SEL to confirm.
Press + or – to select the video to be played. 4) After all settings are done, press M to return to previous panel,
press it again to exit the menu.
RECORD Operation
1) Press M button to enter menu interface. 2) Press + or – to select RECORD. Press SEL to confirm. 3) Press + or – to select REWRITE / FORMAT, press SEL to
confirm. Press + or – to turn on/off. 4) After all settings are done, press M to return to previous panel,
press it again to exit the menu.
REWRITE It will automatically overwrite the previous videos when the SD card is full. If you turn on it, please remember to save the video file in time if you need it to avoid it being overwritten.
FORMAT It will clear all data in the system. If not turned off, the formatting will be always happening. Copy out the useful recording material first to avoid losing important videos before formatting. NOTICE Recording can only record what is on the screen, not all cameras unless in split screen mode. (*Press and hold the + button for 5S to star/stop recording.)
TROUBLESHOOTING
Would not pair with the monitor 1) First ensure the camera has power. 2) Ensure that the antennas on both the screen and camera are securely screwed on. 3) Do not turn on the camera until the pairing count-down had already started.
14
ZEROXCLUB Instructions Manual
4) When pairing, power on one camera at a time. Turning on all cameras interferes with pairing and causes pairing to fail.
5) Try moving the camera closer, or pairing the camera to a different camera number in the pairing screen.
6) Move the camera and screen into the same room to attempt pairing. 7) If it not pairs, this indicates that you are going over too great a distance, or that
something is causing wireless interference. In this case, you will have to consider relocating the camera to a different. 8) If it still doesn’t pair in the same room, contact our customer service email: sales@uszeroxclub.com.
Monitor and camera disconnected (intermittent / no signal)
1) Check whether the camera still has the remaining power. If the blue power indicator is often on, it means that there is remaining power. If only one lamp is flickering, it means that the camera is out of power and need to be charging. Fully charge the camera first with the USB-C cable. If the camera still displays a blue screen even though it has power, the pairing has been disconnected. Please refer to the manual to re-pair.
2) Chang the the angle of the antenna can improve signal. Move the antenna out a little bit, keeping the tip of the antenna as far away from metal objects as possible. The antenna cling to the sheet metal will weaken the transmission signal. Make sure the antenna of the camera and the monitor is firmly installed.
3) If it disconnects sometimes but comes back on, please spraying contact cleaner on antenna connection on camera.
4) If the vehicle body is aluminum or fiberglass which is blocking the signal and we recommend that you raise the camera to get a direct line of sight signal.
5) Look at the camera/monitor to find if the antenna is off. Check if the antenna screw connector on the camera/monitor is loose.
6) Check if there is an issue with the center conductor of the antenna. 7) Check other devices transmitting on the 2.4g frequency like WIFI, Bluetooth, and
other devices like tire management systems. Stay the electronic devices such as mobile phones away from the monitor to avoid signal interference. 8) If there still has a signal issue with the system after above adjustment, we are willing to send you a 10ft antenna extension cable, please contact us via sales@uszeroxclub.com, we will send it to you for free.
Monitor shows a black screen 1) Check if the pin on the inside of the power plug for the monitor is broken off.
15
ZEROXCLUB Instructions Manual
2) If using a cigarette lighter installation, check if the cigarette lighter is broken. Check your fuses to ensure everything is not blown. Use the red and black power cord to test. After plugging the cigarette lighter into the vehicle’s cigarette lighter socket, press the cigarette lighter’s switch and check to see if the cigarette lighter emits a blue light. Or use a data cable to plug into the USB port on the cigarette lighter to see if you can charge your cell phone or other device.
3) Check power at monitor plug and have 12volts? 4) Check the car battery if is good and replaced it. 5) If you have gone through the above checks and still have a black screen, please
contact us via sales@uszeroxclub.com with your Amazon order ID. Unable to Charge
1) Check if the wall socket is off or damaged. 2) Check if the cable or charger is damaged. Use another cable or another 5V/2A
charger to charge the camera and put it in the wall socket. Or you may use other devices to verify the charger and USB-C cable could work well. 3) The camera does not support fast charging protocols, so using a fast charging cable may cause damage to the camera. 4) Bad contact in the charging cable. Unplug and re-insert the charging cable. Ensure the stable connection. 5) Improper charging temperature. For the battery-powered camera, it cannot be charged if the temperature is out of the charging temperature range 0(32) – 45 (113). You may take the camera and battery back to the room and wait for it back to the room temperature to charge for a test. 6) The battery charging input is less than the output. Please turn off the camera to charge it for several hours. 7) To ensure that you have the most current possible running through your charging cable, please use a wall outlet. Using the USB port on a laptop or desktop computer can charge your camera, but it often does so much slower. 8) The Type-C port on the camera is damaged. Check if the port was oxidation/rust,
splitting or water-in. If there is damage to the type-c port, please contact us via
sales@uszeroxclub.com with your Amazon order ID and issue picture. The monitor is upside down
Make sure the screen back to the non-menu panel, then press and hold the button to a few seconds to rotate it.
Camera shuts off after working for a few minutes, press the power button again, it works for a few minutes and then shuts off again.
16
ZEROXCLUB Instructions Manual
When the camera is low battery, it may cut off power after a few minutes, and then, when turned on again, it may work for a few more minutes before the power is cut off once more. Therefore, please recharge it using the included Type-C cable to ensure a fully charge before use.
If you have any questions not mentioned above, just feel free to email us at sales@uszeroxclub.com. We’re always there for you!
FAQS
Question
The suction cup mount doesn’t stick to dashboard, what should I do?
Can I turn on/off the camera from inside the cab?
Does it only comes on when I am in reverse? How to start to record video?
Answer
If the rough surface of the dash did not work, you can plan ahead and make sure the surface is smooth, like glass or plastic. Clean the windshield thoroughly (inside) then place it, it will stick, if it doesn’t then wash the rubber/suction part then try again If the surface is NON-SMOOTH or NOT-FLAT, you can use sticky adhesive or double-sided circle or a small piece of sturdy velcro to help it mount. Yes. You can turn on the camera first and then press the switch on the car charger to cut off the monitor’s power; the camera will automatically turn off about 1 minute later. The camera will also turn on automatically about 1 minute after you connect the monitor again. No, this is completely wireless and there are no wires which connect to the backup lights. If you have it always plugged-in to your car’s power outlet, it comes on when you fire up the car. There is also a button on the charger you can manually push to turn it on/off anytime. Press and hold the + button for 5 seconds, a sign will appear on the top center of the screen
17
ZEROXCLUB Instructions Manual
and the monitor will start to record. Press it again
to stop record
1.Use a wall outlet to charge the camera:
Plug the USB end of the charging cable into the
USB wall charger.
Plug the other end into the camera’s type-c port.
Plug the charge into the wall outlet.
2.Charge the camera with a batter pack:
Charge your power bank in advance and
remember to take it with you when you won’t
have access to wall outlet.
Plug the charging cable into the batter pack and
into your camera. How to charge the backup camera?
5. Adjusting solar panel so it can receive direct
sunlight. Solar charging can only extend the
working time, it is recommended to use the
type-c charging.
Note: Turn off the camera while charging.
Note: Due to the size limitations of the solar
panels, solar charging will be less efficient than
the rate of power consumption, and it is best to
use solar power as a means of extending the
operating time of the camera. It is necessary to
charge with a charger regularly.
How do I keep my backup camera clean in the winter?
We suggest to coat the camera lens with a hydrophobic fluid, such as Rain-X, as a way to keep snow and slush from clinging to the lens.
How to turn on the night vision of the It will be automatically turned on in the dark
camera?
environment.
How to turn on/off the Parking
1. Press
button.
Guideline?
2. MENU SYSTEM P-LINE ON/OFF.
It might be caused by the current, please make
Why the screen is flicking?
sure the current draw on the camera and monitor
is 2A.
18
ZEROXCLUB Instructions Manual
There is nothing for magnet to stick on with vehicle.
What if I am not satisfied with this product?
Check proper wiring to avoid loose and poor attachments and connections of wires, as this may affect the delivery of images. Aluminum and fiberglass magnets vehicle body is weakly attracted to a magnetic base. We recommend that you can purchase a metal plate and bolts from the local hardware store. After cutting it down to size and used the bolts that you through-bolted to the vehicle. Or use Loctite Power Grab adhesive to secure a metal plate similar in size to the camera and mount it on the vehicle where you want to place the camera. We offer a 18-month warranty and 30 days money back guarantee on all our products. If you have any problems with the product, please feel free to contact us via sales@uszeroxclub.com. We will reply you within 24 hours.
SAFETY INFORMATION
There are no user-serviceable parts inside the ZEROXCLUB camera system. Contact ZEROXCLUB customer service at sales@uszeroxclub.com if the part is ever compromised. Do not disassemble or attempt to repair any part of the camera system. Children should be supervised to ensure that they do not play with the appliance. Use this product within the voltage range specified. Failure to do so can cause electronic shock or product malfunction. Do not install the monitor where it may obstruct drivers view or obstruct an air bag device. Do not operate the monitor while driving, as it may cause an accident.
19
ZEROXCLUB Instructions Manual
Dropping the unit may cause possible mechanical failure.
SPECIFICATIONS
Monitor
LCD Display
7”
Connector Type Item Weight Power Supply Monitor Dimensions
Image Sensor Effective Pixels
DC female connector 0.52 pounds DC 12V~24V 230mA 7.3(L) x 4.53(H) x 0.78(D) in
Camera
CMOS 1920 x 1080
Waterproof Rating Charging Voltage View Angle Operating Temperature Item Weight Solar Panel Size Camera Dimensions
Battery Capacity
IP69K DC 5V 2A 140° -4°F~ 158°F 1.54 pounds 3.8(L) x 2.4(H) x 0.19(D) in 4.29(L) x 3.3(H) x 2.9(D) in
Others
9600MaH
USB Charging Time
6 Hours
Continuous Working
About 8-10 Hours
Time (Fully Charged)
Maximum Signal Range: 55 feet
20
Documents / Resources
 |
ZEROXCLUB BD701 Solar Wireless Backup Camera System [pdf] User Manual BD701, BD701 Solar Wireless Backup Camera System, Solar Wireless Backup Camera System, Wireless Backup Camera System, Backup Camera System, Camera System |