ZEMGO ZEM-EDB3 High Performance Indoor Green Square Exit Button

ZEMGO ZEM-EDB3 High Performance Indoor Green Square Exit Button

Dimension

  • Front View
    Dimension
  • Side View
    Dimension
  • Length (A): 114.0mm (4.46 Inch)
    Width (B): 69.40mm (2.73 Inch)
    Depth (C): 5.4mm (0.21 Inch)
    Dimension

Push to Exit Button Wiring Diagram

+ : Red
: Black
COM : Green
N.O.: White
N.C. : Orange
Push to Exit Button Wiring Diagram

  1. Push-button dry contact rating: 10A/125VAC For safe operations, do not exceed the ratings above.
  2. For normally open requirements, connect wires to N.O dry contact of PUSH-BUTTON
  3. For normally closed requirements, connect wire to N.C dry contact of PUSH-BUTTON

How to Replace the Plastic Sheet

  1. Rotary switch Counterclockwise
    How to Replace the Plastic Sheet
  2. Remove the switch
    Push the white plastic
    Push out the white plastic seat
    How to Replace the Plastic Sheet
  3. Open the cover with a screwdriver
    How to Replace the Plastic Sheet
  4. Replace the plastic sheet
    How to Replace the Plastic Sheet

Customer Support

Disclaimer: ZEMGO reserve the right to go ahead with any modifications of models or features or price without forewarning. All the information and specifications stated in this document are current at the time of publication. Attention: We are not responsible for the improper installation of this product. If you are not handy with electrical equipment you should contact a professional electrician. You will also need to check with your local Fire authority to see if you need anything else to comply with local Fire Codes. We are not responsible for any damage or fees that can occur.
www.zemgosmart.com

Logo

Documents / Resources

ZEMGO ZEM-EDB3 High Performance Indoor Green Square Exit Button [pdf] Installation Guide
ZEM-EDB3, ZEM-EDB3 High Performance Indoor Green Square Exit Button, High Performance Indoor Green Square Exit Button, Indoor Green Square Exit Button, Square Exit Button, Button

References

Leave a comment

Your email address will not be published. Required fields are marked *