Home - Zemgo Smart Systems
Installation Guide for ZEMGO models including: ZEM-EDB3, ZEM-EDB3 High Performance Indoor Green Square Exit Button, High Performance Indoor Green Square Exit Button, Indoor Green Square Exit Button, Square Exit Button, Button
Zemgo ZEM-EGRSQ1 High-Performance Indoor Green Square Exit Button with LED Indicator for Door Access Control, Featuring NC, COM, and NO Outputs - Zemgo Smart Systems
Title: ZEM-EGRSQ1-manual-Indoor Green Square Exit Button Author: www.zemgosmart.com Created Date: 10/24/2024 8:15:59 AM
Zemgo ZEM-EGRSQ1 High-Performance Indoor Green Square Exit Button with LED Indicator for Door Access Control, Featuring NC, COM,
File Info : application/pdf, 2 Pages, 5.76MB
DocumentDocumentRef. ZEM-EGRSQ1 INSTALLATION MANUAL High-Performance Indoor Green Square Exit Button with LED Indicator for Door Access Control, Featuring NC, COM, and NO Outputs Front View Side View 44mm (1.73in.) 82.8mm (3.25in.) 114 A 25mm (0.98in.) Length (A): 114.0mm (4.46 Inch) Width (B): 69.40mm (2.73 Inch) Depth (C): 5.4mm (0.21 Inch) 34.7mm (1.36in.) 5.4 69.40 C B Disclaimer: ZEMGO reserve the right to go ahead with any modifications of models or features or price without forewarning. All the information and specifications stated in this document are current at the time of publication. Attention: We are not responsible for the improper installation of this product. If you are not handy with electrical equipment you should contact a professional electrician. You will also need to check with your local Fire authority to see if you need anything else to comply with local Fire Codes. We are not responsible for any damage or fees that can occur. www.zemgosmart.com Ref. ZEM-EDB3 Push to Exit Button Wiring Diagram + : Red - : Black COM : Green N.O.: White N.C. : Orange (1) Push-button dry contact rating: 10A/125VAC For safe operations, do not exceed the ratings above. (2) For normally open requirements, connect wires to N.O dry contact of PUSH-BUTTON (3) For normally closed requirements, connect wire to N.C dry contact of PUSH-BUTTON How to Replace the Plastic Sheet 1 Rotary switch Counterclockwise 2 Remove the switch Push the white plastic Push out the white plastic seat 3 Open the cover with a screwdriver 4 Replace the plastic sheet Disclaimer: ZEMGO reserve the right to go ahead with any modifications of models or features or price without forewarning. All the information and specifications stated in this document are current at the time of publication. Attention: We are not responsible for the improper installation of this product. If you are not handy with electrical equipment you should contact a professional electrician. You will also need to check with your local Fire authority to see if you need anything else to comply with local Fire Codes. We are not responsible for any damage or fees that can occur. www.zemgosmart.com