ZEBRA ZD220 Series Desktop Printer
Specifications
- Model: ZD220/ZD230
- Included Items:
- Printer
- Power Supply
- 74M Ribbon Core
- Not Included:
- Ribbons
- 300M Ribbon Core
- Non-Zebra Ribbon Adapters
- Genuine Zebra Supplies
Product Usage Instructions
Setup
- Install the software from www.zebra.com/setup
- Set up your printer according to the provided manual
Loading Media and Ribbon
- Connect the power supply.
- Load media by following the instructions in the manual.
- Load ribbon by opening and placing the roll on the holder as instructed.
Power On and Printing
- Power on the printer.
- Perform Media Calibration by pressing and holding the FEED button until the Status…
- Test Print Configuration Report by pressing and holding the FEED button until the Status…
Registration and Support
To register your product, visit www.zebra.com/register for assistance.
What is Included
Not Included
Genuine Zebra Supplies: http://www.zebra.com/supplies
Install Software
- Download and Install Zebra Setup Utilities
- Includes Windows Printer Driver Files.
Set Up Your Printer
Load Media
- Open and place roll on holder
- Push the paper under guides.
- Align sensor near center (default).
Load Ribbon
- Insert Ribbon Take-Up Core. Insert Ribbon Supply.
- Pull ribbon leader and attach to take-up core. Wind forward
Power On and Print
- Press and release Power Button. Lights will cycle.
- Printer Ready when Status Light is steady Green
Perform Media Calibration:
- Press and hold the FEED button until the Status
- Light blinks off and on TWICE, then release.
Test Print Configuration Report:
- Press and hold the FEED button until the Status
- Light blinks off and on ONCE, then release
Register
This is a Zebra QuickHelp QR Code
You will find them on your Zebra product and documentation. Open the camera app on your smart mobile device and point it at the QR code to view helpful content in a browser.
Get Help: www.zebra.com/zd200t-info
Scan for Help
MORE INFORMATION
- NA and Corporate Headquarters
+1 800 423 0442
inquiry4@zebra.com - Asia-Pacific Headquarters
+65 6858 0722
contact.apac@zebra.com - EMEA Headquarters
zebra.com/locations
contact.emea@zebra.com - Latin America Headquarters
+1 847 955 2283
la.contactme@zebra.com
Zebra and the stylized Zebra head are trademarks of Zebra Technologies Corporation, registered in many jurisdictions worldwide.
All other trademarks are the property of their respective owners. ©2019 Zebra Technologies Corporation and/or its affiliates. All rights reserved
FAQs
- Where can I find additional help?
- You can visit www.zebra.com/zd200t-info for assistance or contact one of our regional headquarters listed below:
- NA and Corporate Headquarters: +1 800 423 0442, inquiry4@zebra.com
- Asia-Pacific Headquarters: +65 6858 0722, contact.apac@zebra.com
- EMEA Headquarters: contact.emea@zebra.com
- Latin America Headquarters: +1 847 955 2283, la.contactme@zebra.com
For more location information, visit zebra.com/locations.
Documents / Resources
 |
ZEBRA ZD220 Series Desktop Printer [pdf] Installation Guide ZD220, ZD230, ZD220 Series Desktop Printer, ZD220, Series Desktop Printer, Desktop Printer, Printer |
