ZALMAN CNPS16X Real RGB LED CPU Cooler with 4D Patented Corrugated Fin Design User Manual
- To ensure safe and easy installation, please read the following precaution.
- Product design and specifications may be revised to improve quality and performance without notice.
Precautions
- Avoid tempering with objects or hands into the fan while it is in operation to prevent product damage and injuries.
- Do not eat the thermal grease, and avoid its contact with skin and eyes. If contact is made with skin, wash off with water. If irritation persists, seek medical attention.
- To prevent possible injuries, gloves must be worn while handling this product.
- Excessive force exerted on the fan may cause damage to the fan and/or system.
- Use and keep product away from reach of children.
- Check the components list and condition of the product before installation. If any problem is found, contact the retailer to obtain a replacement.
- Our company assumes no responsibility for any problem that occurs due to theuse of the product for purposes other than its designated purposes and/or the carelessness of the consumer.
- Zalman Tech Co., Ltd. Is not responsible for any damages due to overclocking CPU such as, CPU and system components.
- During transportation of the system, the cooler must be removed. Zalman Tech Co., Ltd. is not responsible for any damages that occur during the transport of a system.
- Product design and specifications may be changed to improve quality and performance without notice
Specifications
Model | CNPS16X | |
Materials | Pure Copper, Pure Aluminum, ABS | |
Dimensions | 140(L) x 100(W) x 165(H)mm | |
Weight | 880g | |
Heat Dissipation Area | 5,117㎠ | |
TDP | 150W | |
Fan(s) | Dimensions | 120(L) x 120(W) x 26(H)mm |
Bearing Type | EBR Bearing | |
Fan Speed | 800~1,500 RPM ±10% | |
Max Noise Level | 27.0 dB(A) ±10% | |
Max Airflow | 49 CFM | |
Max Air Pressure | 1.21mmH2O | |
Rated Voltage | 12 V DC | |
Life Span | 50,000 hours | |
Thermal Compound (ZM-STC8) | Volume / Net Weight | 1.5g |
Temperature Range | -40℃ ~ +150℃ (-40℉ ~ +302℉) |
Components
- Cooler
- Fan+Guide
- Fan+Guide (Reverse)
- Top LED Cover
- Intel Guide
- AMD Guide
- Backplate
- Washers
- Side Caps
- Nuts
- Loading Block (Intel)
- Loading Block (AMD)
- Thermal Compound
- Manual
- Fixing Bolts
- Stand-off Nuts
- Standoffs(A) 115X / AM3 / AM4
- Standoffs(B) 2066 / 2011-V3 / 2011
- PWM Fan ‘Y’ Cable
- Gigabyte Cable
- LED Cable
INTEL, AMD Backplate
- Nuts Position
Caution
Please check the proper ZALMAN logo direction on backplate for each Intel and AMD socket. No backplate is necessary for Intel LGA2066/2011-V/2011 socket. - 115X
- AM3
- AM4
Caution
Take note of the orientation of the nuts and the side caps
INTEL, AMD Loading Block
- Intel
- AMD
Caution
Remove the tape cover of loading block and attach it to the backplate
Intel Users
- LGA2066 / 2011-V3 / 2011
Caution
Backplate is not needed for LGA2066 / 2011-V3 / 2011 sockets.
Caution
Screw-in both bolts in an alternating fashion until they are completely tightened.
Caution
Please check the direction of the fan before installation.
- LGA115X
Caution
Screw-in both bolts in an alternating fashion until they are completely tightened.
Caution
Please check the direction of the fan before installation.
AMD Userse
- AM3 / AM4
Caution
Please be cautious for the direction of AMD Guide installation
Caution
Screw-in both bolts in an alternating fashion until they are completely tightened.
Caution
Please check the direction of the fan before installation
Cable Connection
- Connection to other motherboards
- Connection to Gigabyte motherboards
Fan Specifications
Model : LF120
- Dimensions : 120 x 120 x 26(H)mm
- Fan Speed : 800 ~ 1,500 ±10% RPM
- Max Noise Level : 27 dB(A) ±10%
- Bearing Type : EBR Bearing
- Max Airflow : 49 CFM ±10%
- Max Air Pressure : 1.21mmH2O
- Pin Connector : 4-Pin (PWM), 3-Pin (Addressable)
- Rated Voltage : 5~12 V DC
- Life Span : 50,000 hours
Model : LF120 (Reverse)
- Dimensions : 120 x 120 x 26(H)mm
- Fan Speed : 800 ~ 1,500 ±10% RPM
- Max Noise Level : 27 dB(A) ±10%
- Bearing Type : EBR Bearing
- Max Airflow : 49 CFM ±10%
- Max Air Pressure : 1.21mmH2O
- Pin Connector : 4-Pin (PWM), 3-Pin (Addressable)
- Rated Voltage : 5~12 V DC
- Life Span : 50,000 hours
This mark, designed by Zalman, indicates product compliance with the European Union’s RoHS (Restriction of Hazardous Substances) Directive.
Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems)
Documents / Resources
![]() |
ZALMAN CNPS16X Real RGB LED CPU Cooler with 4D Patented Corrugated Fin Design [pdf] User Manual CNPS16X Real RGB LED CPU Cooler with 4D Patented Corrugated Fin Design, CNPS16X, Real RGB LED CPU Cooler with 4D Patented Corrugated Fin Design, Real RGB LED CPU Cooler, RGB LED CPU Cooler, LED CPU Cooler, CPU Cooler, Cooler |