Setup Guide
- Charging Remove straps from display to reveal metal charging strips. Plug into USB slot on computer or USB charger. A battery charging light displays when you touch the display button. If the device is not shown as charging check that it is plugged in fully and the correct way up for the metal strips to make USB power contact
- Download and install app on your phone –iPhone and Android In Apple app store or Android Play store search for ‘YOHO sports’ by m Cube Inc. Get/Install app.
- Pair device Make sure Bluetooth is enabled on your phone. Make sure the smart band is powered on. Hold display button for 4 seconds if not. The first time you open YOHO Sports it will ask for device permissions (more so on Android phones). Say yes to allow all of these or the band will not pair. Press the setting icon in the top left corner of the app. Select My Device The app should scan and detect the band. Click on the band description to bind.
- Setup app Back in the settings menu click profile. Enter your details Set target goal to 10000! Smart band usage Hold display button for 4 seconds to power on device Hold display button for 4 seconds and select ‘off’ to power off device. Press display button to cycle through information -Time > Steps > km > Kcals > battery The display will turn off after a couple of seconds. Step counter does not update on the display while display is active. It will count your steps and then display them the next time you wake it up. Charge band regularly (every 2 -3 days).If the battery runs flat you will need to resync with the phone app to update time and information.
mCube Yoho Sports Watch Setup Guide – Optimized PDF
mCube Yoho Sports Watch Setup Guide – Original PDF
My yoho pedometer no longer gives an image after charging.
It does vibrate every now and then when a message comes in or when a call is made. Then also
the name displayed on the screen. Furthermore, the screen remains black. What can be done about this?
That is of no use to you.
Mijn yoho stappenteller geeft na opladen geen beeld meer.
Wel trilt hij zo nu en dan als er een bericht binnen komt of als er gebeld wordt. Dan wordt ook
de naam op het scherm getoond. Verder blijft het scherm zwart. Wat is hier aan te doen?
Zo heb je er niets aan.
Since last night, after charging, the time showed incorrectly and trying to correct it failed. Going into the app, the device showed bound, but I could not sync it. Bluetooth on. Tried to update to the latest version I was instructed to bind first, WHAAAAT?