ZZ2 ITZ-LRB To ti ni ilọsiwaju CarPlay / Android Auto Integration ilana
Awọn eroja
- ZZPlay Interface
- Ijanu akọkọ
- GVIF Y-Cable
- Velcro sheet
- SMB Antenna
ITZ-LRB Installation Diagram
Awọn akọsilẹ:
- The radio must be in BT Audio or AUX mode in order for audio playback through the OE speakers.
AKIYESI: some vehicles, AUX is located under ‘My Music’ and require no connection to the USB. - If using (violet) reverse wire trigger, ’12v ACTIVE’ must be set under ‘Reverse Detect in the ‘Car Settings’ menu.
- When this kit is installed, factory Navigation will be inoperable (ti o ba ti ni ipese).
- An aftermarket camera cannot be added to this kit currently.
Awọn Eto Yipada DIP
For this system, when you make a dip switch change, you MUST first remove the SCREEN T-HARNESS plug from the CAR SIDE. The screen and awọn ZZPLAY unit must boot at the same time.
LORI:
PAA:
- Pa ọkọ ayọkẹlẹ PA
- Unplug screen T-HARNESS from CAR side
- Adjust dip switch as necessary
- Reconnect T-HARNESS from CAR side
- Turn vehicle ON and test.
- Bii o ṣe le sopọ si Apple CarPlay / Bii o ṣe le ṣeto Awọn ipe foonu Bluetooth
- Ti o ba fẹ lati lo okun kan lati so rẹ iPhone, jọwọ lo a ifọwọsi Apple USB.
- Ti o ba fẹ lo asopọ alailowaya, jọwọ tẹle awọn igbesẹ atẹle.
- Ṣaaju ki o to so pọ iPhone pẹlu awọn eto, jọwọ rii daju pe o ṣe a "lile si ipilẹ" lori foonu ni ibere lati se eyikeyi aiṣedeede. (Ṣayẹwo iwe afọwọkọ foonu/lori ayelujara)
- Ni kete ti o ba ti ṣe pẹlu igbesẹ ti tẹlẹ lọ si Eto> Bluetooth ati pe foonu yẹ ki o ni anfani lati wa ẹrọ Bluetooth kan ti a pe ni ZZPLAY**** labẹ Awọn ẹrọ miiran.
- Yan ZZPLAY***** ati pe Ibeere Sisopọ Bluetooth yoo han loju iboju pẹlu koodu kan. Yan "PAIR".
- Right after the Pairing notification a new request to Sync your contact with the car will be displayed. Select “ALLOW” in order to have caller ID and access to your contacts through CarPlay.
- Ifitonileti ti n beere fun igbanilaaye lati so iPhone rẹ pọ mọ ọkọ ayọkẹlẹ paapaa nigbati foonu ti wa ni titiipa yoo gbe jade. Yan “Lo CarPlay” ati iboju akọkọ CarPlay yẹ ki o han loju iboju redio ile-iṣẹ.
- Nigbati foonu ba ti sopọ ati so pọ daradara, iboju yoo yipada laifọwọyi si CarPlay. Ni kete ti o ba wa ni ipo CarPlay, ti o ba jẹ dandan, yan ohun elo ZZ2 lati lọ si atokọ akọkọ ti wiwo.
Controlling the module
AKIYESI: With at least system software (2023-12-05), use OEM Bluetooth streaming (source) for all audio playback from CarPlay/Android Auto.
Eto AUDIO fun CarPlay & Android Auto
The best way to use this system is to use factory Land Rover or Jaguar Bluetooth audio for your sound source instead of AUX input. Be sure to be connected to factory Land Rover or Jaguar Bluetooth Audio (source) with the phone, and turn ON the following setting inside the ZZPLAY menu:
- Either disconnect any phone, or find the ‘ZZPLAY’ tile (CarPlay) or ‘Exit’ tile (Android Auto). Scroll all the way right and enter ‘Settings’.
- Lọgan ni Eto, Lọ si 'System', ki o si yan 'Factory Ipo'.
- Lọgan ni Factory Ipo, yan 'Phone ọna asopọ eto'.
- Now check ON ‘Disable phone link audio’. After this, return to ‘Factory Mode’ (one step back) and choose ‘Reboot’. Use the factory Bluetooth Audio source for all sound (music & phone calls).
Awọn oju-iwe diẹ ti o tẹle ti pariview the ZZPLAY interface, navigating settings and explains entering/exiting all menus. There are (2) menu systems that exist outside of the OE radio system: Carplay (or Android Auto) menu and the ZZPLAY Interface Menu. They operate independent of each other (the ZZPLAY Interface menu will function regardless of whether or not a phone is connected to the module). Settings found inside Carplay will only affect CarPlay functionality. Settings for the ZZPLAY Interface control things like reverse camera settings, audio output control settings and other vehicle/interface-specific parameters.
- KARPLAY
- ZZPLAY INTERFACE Akojọ
Lati tẹ awọn ZZPLAY Interface Menu from the CARPLAY system, locate the ZZPLAY tile and select it. If there is no phone connected, simply using the activation button (which normally brings you into KARPLAY mode) will enter you in the ZZPLAY Ni wiwo Akojọ aṣyn.
Selecting ‘Settings’ will bring you to the ZZPLAY Interface Setup Menu with all options pertaining to the specific vehicle and install.
Gbogboogbo:
Faye gba awọn atunṣe fun iṣakoso iwọn didun agbaye ati iṣẹjade iṣakoso iwọn didun lilọ kiri (pato). Bakannaa aṣayan wa fun sisọpọ foonu olumulo laifọwọyi.
Eto ọkọ ayọkẹlẹ:
Ngba awọn atunṣe fun awọn kamẹra(s) ati awọn aṣayan MIC.
These options are specific to the how the interface handles camera triggers and types (data vs analog wire, OEM vs aftermarket etc). A few other vehicle-specific settings can be found here as well.
Akojọ Eto Interface ZZPLAY
Ifihan:
Faye gba awọn atunṣe fun imọlẹ, itansan & ekunrere
Eto:
Ṣe afihan ohun elo & alaye sọfitiwia.
Ipo ile-iṣẹ:
Ifagile iwoyi: Ṣiṣe eyi lati gba iṣẹ ṣiṣe to dara julọ lati inu gbohungbohun ti a pese (ti o ba ni ipese)
Onitẹsiwaju Eto: Stores settings that do not need adjustment at this time from end user. Phone Link Setting: Use these settings if you want a specific type of handset (iPhone vs Android) to be wired only / or wireless only. Helpful for when 2 handsets are in the vehicle at the same time.
Atunbere: tẹ lati tun bẹrẹ eto ZZPLAY laisi pipa ọkọ.
Ipo Kamẹra yiyipada: Ni igbagbogbo ko nilo atunṣe, ṣugbọn ṣatunṣe boṣewa fidio fun awọn kamẹra ti a ti sopọ.
Ohun:
Faye gba baasi, aarin & awọn atunṣe tirẹbu fun iṣelọpọ ohun.
Eto Asopọ foonu
ITZ-LRB FAQ
Ibeere: Emi ko le gbọ ohun eyikeyi lati inu ẹrọ CarPlay/Android Auto.
Answer: With the latest software, you must use factory Bluetooth Streaming in order to hear any sound from the ZZPLAY kit. This includes during phone calls. NOTE: The phone must be connected to the factory radio Bluetooth simultaneously with the ZZPLAY module, and you must rest on 'BT Audio'.
Ibeere: Mo ngbọ awọn ijabọ ti ọpọlọpọ iwoyi tabi idaduro idaduro lori ohun lakoko ipe foonu kan. Kini idi ti eyi n ṣẹlẹ ati bawo ni MO ṣe le yọkuro eyi?
Idahun: Eyi n ṣẹlẹ nigba lilo titẹ sii OEM AUX fun ohun dipo OEM Bluetooth. Ọna AUX n rin nipasẹ OEM amplifier, nibiti titete akoko ti nṣiṣe lọwọ & sisẹ lori ikanni ohun afetigbọ yii.
Dahun: Fun iPhone awọn olumulo, o gbọdọ ṣe a 'Lile Tun' lori foonu ni lilo lori apapọ lẹmeji osu kan lati ko awọn kaṣe ki o si tun awọn nse (yi yoo ko mu ese eyikeyi data). Wiwa Google 'Lile Tun iPhone 13' (tabi eyikeyi ẹya iPhone ti ikede ti o ni) ati ṣe iṣẹ yẹn. Lẹhin ti o ti ṣe eyi, iwọ yoo rii iyatọ ninu iyara ati igbẹkẹle (ti sisopọ / sisopọ).
Ibeere: Awọn idahun ọrọ ti nwọle lati SIRI wa ni ipalọlọ lori CarPlay. O mu ohun naa dakẹ ṣugbọn Emi ko gbọ kika-jade.
Idahun: Eyi nigbagbogbo n ṣẹlẹ fun awọn idi 2: iPhone nilo atunto lile (wo ibeere iṣaaju), tabi foonu naa ti sopọ mọ ọkọ ayọkẹlẹ OE Bluetooth fun awọn ipe foonu mejeeji & ohun (ati pe awọn kika kika ọrọ ti wa ni fifiranṣẹ si orisun BT ọkọ - o wa lori orisun AUX). O fẹ lati sopọ si ọkọ fun awọn ipe foonu NIKAN - fun iPhone nikan ni ọna lati ṣe iyatọ yii ni lati ṣatunṣe iṣeto foonu ni ẹgbẹ redio OE. Wa foonu rẹ (orukọ) ni Bluetooth tabi Eto foonu ni awọn eto redio OEM ki o ge asopọ gẹgẹbi ẹrọ orin ohun. AKIYESI: kii ṣe gbogbo awọn ọkọ ayọkẹlẹ ni aṣayan yii, ṣugbọn o dabi pe o ṣẹlẹ julọ pẹlu awọn ọkọ ayọkẹlẹ ti o ni aṣayan yii (Lexus, ati bẹbẹ lọ).
Ibeere: Lilo Android, Mi o le gba foonu naa lati sopọ ni igbẹkẹle lailowa (tabi rara).
Answer: Android phones are more finicky and iPhones with their wireless connectivity. Make sure the OS is fully up-to-date. Clear the cache on the Android Auto application. The Android OS must be at least version 11. Some phones (TCL, Motorola) seem to have protocols that don't play nice with every system. If you run into this, use a good USB-C cable for the Android Auto Connection instead
OE System Note
After installation is completed, verify that ‘Time out home’ is turned OFF, otherwise the OE screen will time out due to (perceived) inactivity, resulting in a drop-out situation from CarPlay/AA.
support@zz-2.com
929-220-1212
Owo ọfẹ: 877-241-2526
Itẹsiwaju 2: Tekinoloji Support
Adehun: Olumulo ipari gba lati lo ọja yii ni ibamu pẹlu gbogbo awọn ofin Ipinle ati Federal. ZZDOIS LLC dba ZZ-2 ko yẹ ki o ṣe oniduro fun ilokulo ọja rẹ. Ti o ko ba gba, jọwọ dawọ duro lẹsẹkẹsẹ ki o da ọja pada si alagbata. Ọja yii jẹ ipinnu fun lilo ita-opopona ati ere idaraya ero-ọkọ nikan.
Before installation of any ZZ-2 LLC products, users must fully read and understand the manual. By installing and/or using the product you agree to be bound by the following terms and conditions: In no respect shall ZZ-2 LLC incur any liability for any damages, including, but limited to, direct, indirect, special, or consequential damages arising out of, resulting from, or any way connected to the use of ZZ-2 LLC products whether or not based upon warranty, contract, tort, or otherwise; whether or not injury was sustained by persons or property or otherwise; and whether or not loss was sustained from, or arose out of, the results of, the item, or any services that may be provided by ZZ-2 LLC.
Awọn iwe aṣẹ / Awọn orisun
 |
ZZ2 ITZ-LRB Advanced CarPlay / Android Auto Integration [pdf] Ilana itọnisọna ZZ-2, ITZ-LRB Advanced CarPlay Android Auto Integration, ITZ-LRB, Advanced CarPlay Android Auto Integration, CarPlay Android Auto Integration, Android Auto Integration, Auto Integration, Integration |