Manyèl Enstriksyon pou Entegrasyon ZZ2 ITZ-LRB CarPlay Avanse / Android Auto

Eleman

• ZZPlay entèfas
  
• Prensipal ekipay
  
• Kab GVIF Y
  
• Velcro sheet
  
• SMB Antenna
  

ITZ-LRB Installation Diagram

Nòt:

• The radio must be in BT Audio or AUX mode in order for audio playback through the OE speakers.
  REMAK: some vehicles, AUX is located under ‘My Music’ and require no connection to the USB.
• If using (violet) reverse wire trigger, ’12v ACTIVE’ must be set under ‘Reverse Detect in the ‘Car Settings’ menu.
• When this kit is installed, factory Navigation will be inoperable (si ekipe).
• An aftermarket camera cannot be added to this kit currently.

Anviwònman DIP switch

For this system, when you make a dip switch change, you MUST first remove the SCREEN T-HARNESS plug from the CAR SIDE. The screen and la ZZPLAY unit must boot at the same time.
SOU:

OFF:

1. Etenn machin
2. Unplug screen T-HARNESS from CAR side
3. Adjust dip switch as necessary
4. Reconnect T-HARNESS from CAR side
5. Turn vehicle ON and test.

• Ki jan yo konekte ak Apple CarPlay / Ki jan yo konfigirasyon apèl nan telefòn Bluetooth

1. Si ou ta renmen sèvi ak yon kab pou konekte iPhone ou, tanpri itilize yon kab sètifye Apple.
2. Si ou ta sèvi ak yon koneksyon san fil, tanpri swiv pwochen etap yo.
3. Anvan asosye iPhone a ak sistèm nan, tanpri asire w ke ou fè yon "reset difisil" sou telefòn la yo nan lòd yo anpeche nenpòt ki fonksyone byen. (Tcheke manyèl telefòn / sou entènèt)
4. Yon fwa ou fini ak etap anvan an ale nan Anviwònman> Bluetooth epi telefòn nan ta dwe kapab jwenn yon aparèy Bluetooth ki rele ZZPLAY***** anba Lòt Aparèy yo.
   
5. Chwazi ZZPLAY***** epi yon demann Bluetooth Pairing ap parèt sou ekran an ak yon kòd. Chwazi "PAIR".
   
6. Right after the Pairing notification a new request to Sync your contact with the car will be displayed. Select “ALLOW” in order to have caller ID and access to your contacts through CarPlay.
   
7. Yon notifikasyon ki mande yon pèmisyon pou konekte iPhone ou ak machin nan menm lè telefòn nan fèmen ap parèt. Chwazi "Sèvi ak CarPlay" epi ekran prensipal CarPlay ta dwe parèt sou ekran radyo faktori a.
   
8. Lè telefòn nan konekte ak pè byen, ekran an pral otomatikman chanje nan CarPlay. Yon fwa ou nan mòd CarPlay, si tout tan sa nesesè, chwazi app ZZ2 pou ale nan meni prensipal koòdone a.

Controlling the module

ATANSYON: With at least system software (2023-12-05), use OEM Bluetooth streaming (source) for all audio playback from CarPlay/Android Auto.

Enstalasyon ODYO pou CarPlay & Android Auto

The best way to use this system is to use factory Land Rover or Jaguar Bluetooth audio for your sound source instead of AUX input. Be sure to be connected to factory Land Rover or Jaguar Bluetooth Audio (source) with the phone, and turn ON the following setting inside the ZZPLAY menu:

1. Either disconnect any phone, or find the ‘ZZPLAY’ tile (CarPlay) or ‘Exit’ tile (Android Auto). Scroll all the way right and enter ‘Settings’.
   
2. Yon fwa ou antre nan Anviwònman yo, ale nan 'Sistèm', epi chwazi 'Mòd faktori'.
   
3. Yon fwa ou nan Mòd Faktori a, chwazi 'Paramèt Lyen Telefòn'.
   
4. Now check ON ‘Disable phone link audio’. After this, return to ‘Factory Mode’ (one step back) and choose ‘Reboot’. Use the factory Bluetooth Audio source for all sound (music & phone calls).
   

ZZPLAY Entèfas Main Menu

ZZPLAY Entèfas Anviwònman Menu

Paj kap vini yo souview the ZZPLAY interface, navigating settings and explains entering/exiting all menus. There are (2) menu systems that exist outside of the OE radio system: Carplay (or Android Auto) menu and the ZZPLAY Interface Menu. They operate independent of each other (the ZZPLAY Interface menu will function regardless of whether or not a phone is connected to the module). Settings found inside Carplay will only affect CarPlay functionality. Settings for the ZZPLAY Interface control things like reverse camera settings, audio output control settings and other vehicle/interface-specific parameters.

• CARPLAY
  
  
• ZZPLAY INTERFACE MEI
  
  

Pou antre nan ZZPLAY Interface Menu from the CARPLAY system, locate the ZZPLAY mozayik la epi chwazi li. Si pa gen okenn telefòn ki konekte, tou senpleman sèvi ak bouton aktivasyon an (ki nòmalman mennen ou nan CARPLAY mòd) ap mete ou nan la ZZPLAY Meni Entèfas.

Selecting ‘Settings’ will bring you to the ZZPLAY Interface Setup Menu with all options pertaining to the specific vehicle and install.

Jeneral:
Pèmèt ajisteman pou kontwòl volim mondyal ak navigasyon (espesifik) pwodiksyon kontwòl volim. Epitou gen yon opsyon pou oto-appariement appareil itilizatè a.

Anviwònman Machin:
Pèmèt ajisteman pou kamera (yo) ak opsyon MIC.
These options are specific to the how the interface handles camera triggers and types (data vs analog wire, OEM vs aftermarket etc). A few other vehicle-specific settings can be found here as well.

ZZPLAY Entèfas Anviwònman Menu

Ekspozisyon:
Pèmèt ajisteman pou klète, kontras ak saturation

Sistèm:
Montre enfòmasyon sou pyès ki nan konpitè ak lojisyèl.

Mòd faktori:
Anile eko: Kouri sa a pou jwenn pi bon pèfòmans posib nan mikwofòn ki vini ak li a (si li ekipe).
Anviwònman avanse: Stores settings that do not need adjustment at this time from end user. Phone Link Setting: Use these settings if you want a specific type of handset (iPhone vs Android) to be wired only / or wireless only. Helpful for when 2 handsets are in the vehicle at the same time.
Rdemare: peze pou rdemare sistèm ZZPLAY la san yo pa fèmen machin lan.
Mode kamera ranvèse: tipikman pa bezwen ajisteman, men ajiste estanda videyo pou kamera konekte.

Son:
Pèmèt ajisteman bas, mitan & treble pou pwodiksyon odyo.

Anviwònman Lyen Telefòn

ITZ-LRB FAQ

Kesyon: Mwen pa ka tande okenn odyo nan sistèm CarPlay/Android Auto a.

Answer: With the latest software, you must use factory Bluetooth Streaming in order to hear any sound from the ZZPLAY kit. This includes during phone calls. NOTE: The phone must be connected to the factory radio Bluetooth simultaneously with the ZZPLAY module, and you must rest on 'BT Audio'.

Kesyon: Mwen tande rapò sou anpil eko oswa eko reta sou odyo pandan yon apèl nan telefòn. Poukisa sa ap pase ak ki jan mwen ka elimine sa a?

Repons: Sa rive lè w ap itilize OEM AUX D' pou odyo olye de OEM Bluetooth. Chemen AUX la vwayaje atravè OEM la amplifier, kote gen aktif aliyman tan ak pwosesis sou chanèl odyo sa a.

Kesyon: Pafwa telefòn mwen an pa pral konekte dènyèman / Pafwa lè li konekte ekran an vin nwa / Pafwa CarPlay voye m 'soti nan meni an koòdone.

Repons: Pou itilizatè iPhone, ou dwe fè yon 'Hard Reset' sou telefòn nan itilize an mwayèn de fwa pa mwa pou netwaye sèten kachèt ak reset processeurs yo (sa a pa pral siye okenn done). Rechèch Google 'Hard Reset iPhone 13' (oswa kèlkeswa vèsyon iPhone ou genyen) epi fè travay sa a. Apre sa fin fè, ou pral wè yon diferans nan vitès ak fyab (nan pè / konekte).

Kesyon: Repons tèks k ap vini soti nan SIRI yo an silans sou CarPlay. Li koupe odyo a men mwen pa tande lekti a.

Repons: Sa a souvan rive pou 2 rezon: iPhone a bezwen yon reset difisil (gade kesyon anvan an), oswa telefòn nan konekte ak Bluetooth OE veyikil la pou tou de apèl telefòn ak odyo (epi tèks lekti yo ap voye bay la). sous BT machin - ou sou sous AUX). Ou vle konekte ak veyikil la pou apèl nan telefòn SÈLMAN - pou iPhone sèl fason pou fè distenksyon sa a se ajiste konfigirasyon telefòn lan sou bò radyo OE. Jwenn telefòn ou (non) nan konfigirasyon Bluetooth oswa Telefòn nan anviwònman radyo OEM yo epi dekonekte kòm yon jwè odyo. REMAK: se pa tout machin ki gen opsyon sa a, men li sanble rive sitou ak machin ki gen opsyon sa a (Lexus, elatriye).

Kesyon: Sèvi ak android, mwen pa ka jwenn telefòn nan konekte san fil (oswa ditou).

Answer: Android phones are more finicky and iPhones with their wireless connectivity. Make sure the OS is fully up-to-date. Clear the cache on the Android Auto application. The Android OS must be at least version 11. Some phones (TCL, Motorola) seem to have protocols that don't play nice with every system. If you run into this, use a good USB-C cable for the Android Auto Connection instead

OE System Note

After installation is completed, verify that ‘Time out home’ is turned OFF, otherwise the OE screen will  time out due to (perceived) inactivity, resulting in a drop-out situation from CarPlay/AA.

support@zz-2.com
929-220-1212
Nimewo telefòn gratis: 877-241-2526
Ekstansyon 2: Sipò teknik

Akò: Itilizatè final dakò pou sèvi ak pwodui sa a an konfòmite ak tout lwa Eta ak Federal. ZZDOIS LLC dba ZZ-2 pa dwe responsab pou move itilizasyon pwodwi li yo. Si ou pa dakò, tanpri sispann sèvi ak yo imedyatman epi retounen pwodwi yo bay revandè. Pwodwi sa a fèt pou itilize nan wout ak amizman pasaje sèlman.

Before installation of any ZZ-2 LLC products, users must fully read and understand the manual. By installing and/or using the product you agree to be bound by the following terms and conditions: In no respect shall ZZ-2 LLC incur any liability for any damages, including, but limited to, direct, indirect, special, or consequential damages arising out of, resulting from, or any way connected to the use of ZZ-2 LLC products whether or not based upon warranty, contract, tort, or otherwise; whether or not injury was sustained by persons or property or otherwise; and whether or not loss was sustained from, or arose out of, the results of, the item, or any services that may be provided by ZZ-2 LLC.

www.zz-2.com

Dokiman / Resous

ZZ2 ITZ-LRB Advanced CarPlay / Android Auto Integration [pdfManyèl Enstriksyon ZZ-2, ITZ-LRB Advanced CarPlay Android Auto Integration, ITZ-LRB, Advanced CarPlay Android Auto Integration, CarPlay Android Auto Integration, Android Auto Integration, Auto Integration, Integration

Referans

• Manyèl itilizatè