Zennio ZIOMB24V2 MAXinBOX Awọn abajade KNX Afọwọṣe Oluṣeto Oluṣeto

Ẹya MAXinBOX lati ọdọ Zennio pẹlu awọn adaṣe KNX wapọ pẹlu ọpọlọpọ awọn abajade isọjade. Wọn nfunni awọn iṣẹ bii awọn abajade ON / PA ẹni kọọkan, awọn ikanni titiipa ominira, awọn modulu okun onifẹfẹ, awọn iṣẹ ọgbọn isọdi, awọn modulu iṣakoso ina titunto si, awọn iṣe ti o fa iṣẹlẹ, iṣẹ afọwọṣe nipasẹ awọn bọtini titari, awọn iwifunni lilu ọkan, ati diẹ sii. Awoṣe kọọkan ninu jara yatọ si ni nọmba awọn igbejade yii ti o pese.

Awọn pato

Orukọ ọja: MAXinBOX
Awọn ẹya: 24 v2, 20, 16 v4, 12, 8 v4
Awọn abajade: 24 / 20 / 16 / 12 / 8
Olupese: Zennio

Awọn ilana Lilo ọja

Ibẹrẹ-Ipadanu Agbara
Lakoko ibẹrẹ, Prog./Test LED yoo seju ni buluu fun iṣẹju diẹ ṣaaju ki ẹrọ naa ti ṣetan. Awọn aṣẹ ita kii yoo ṣiṣẹ ni akoko yii. Lẹhin ibẹrẹ, awọn iṣe kan pato le ṣee ṣe da lori awọn eto iṣeto ni. Ni ọran ikuna agbara ọkọ akero, MAXinBOX yoo ṣafipamọ ipo rẹ yoo da duro eyikeyi awọn iṣe isunmọ titi ti agbara yoo fi mu pada. Awọn ikanni Shutter yoo da duro ni iṣẹlẹ ti ipadanu agbara.

Awọn ọna ṣiṣe
MAXinBOX le ṣiṣẹ ni awọn ipo oriṣiriṣi:
- Awọn abajade TAN/PA ẹni kọọkan: Ṣe atunto awọn abajade isọdọtun lati yi awọn ẹrọ kọọkan si tan tabi paa.
- Awọn ikanni Shutter: Ṣakoso awọn ikanni titiipa ominira pẹlu tabi laisi slats.
- Awọn Modulu Coil Fan: Iṣakoso àìpẹ iyara ati àtọwọdá lilo relays.
- Awọn iṣẹ ọgbọn Aṣa: Ṣẹda aṣa olona-isẹ kannaa awọn iṣẹ.

Awọn iṣe-Iranyan Oju-aye
Ṣeto awọn iṣe ti o nfa aaye pẹlu awọn idaduro iyan fun ipaniyan. Ẹya yii ngbanilaaye fun adaṣe da lori awọn oju iṣẹlẹ ti a ti yan tẹlẹ.
Isẹ afọwọṣe
Ṣe abojuto ati ṣiṣẹ pẹlu ọwọ ṣiṣẹ awọn abajade isọjade nipa lilo awọn bọtini itusilẹ inu ati awọn LED fun iṣakoso iyara ati ibojuwo.

KNX Aabo
Fun alaye alaye lori iṣẹ aabo KNX ati iṣeto ni, tọka si iwe afọwọkọ olumulo kan pato ti o wa lori Zennio webojula.

FAQ

Q: Ṣe MO le tunto awọn abajade isọdọtun lati ṣiṣẹ bi awọn abajade ON/PA kọọkan ati awọn ikanni oju ni nigbakannaa?
A: Bẹẹni, awọn abajade isọdọtun jẹ atunto lati ṣe atilẹyin apapọ awọn iṣẹ pẹlu iṣakoso ON/PA ẹni kọọkan ati iṣẹ ikanni tiipa ominira.

Q: Bawo ni MO ṣe le tun ẹrọ naa si awọn eto aiyipada rẹ?
A: Lati tun ẹrọ naa pada si awọn aṣiṣe ile-iṣẹ, tọka si itọnisọna olumulo fun awọn ilana kan pato lori ṣiṣe ilana atunṣe.

Awọn awoṣe

MAXinBOX 24 v2
MAXinBOX 20
MAXinBOX 16 v4
MAXinBOX 12
MAXinBOX 8 v4

Multifunction Actuator pẹlu 24/20/16/12/8 Awọn igbejade

ZIOMB24V2
ZIOMB20
ZIOMB16V4
ZIOMB12
ZIOMB8V4

AKOSO

MAXINBOX 24 v2 / 20 / 16 v4 / 12 / 8 v4
MAXinBOX 16 v4, MAXinBOX 12, ati MAXinBOX 8 v4 lati Zennio jẹ awọn adaṣe meji ti o wapọ KNX ti o nfihan ọpọlọpọ awọn iṣẹ ṣiṣe, ti o jẹ mejeeji deede deede ayafi fun nọmba awọn abajade isọdọtun ti wọn funni (24, 20, 16, 12, ati 8, lẹsẹsẹ). Awọn iṣẹ ṣiṣe akọkọ rẹ ni:

Awọn abajade yiyi, lẹsẹsẹ, jẹ atunto bi:
- Awọn abajade TAN/PA ẹni kọọkan,
- Awọn ikanni titiipa ominira (pẹlu tabi laisi awọn slats),
- Awọn modulu okun onifẹ meji-meji nibiti iṣakoso iyara afẹfẹ mejeeji ati iṣakoso àtọwọdá ti ṣe nipasẹ awọn isọdọtun,
- Apapo ti awọn loke.
asefara, olona-isẹ kannaa awọn iṣẹ.
Awọn modulu iṣakoso ina Titunto fun irọrun, iṣakoso-jade-apoti ti ṣeto ti awọn luminaires (tabi awọn ẹrọ deede iṣẹ) ọkan ninu eyiti o ṣe bi l gbogbogboamp ati awọn miiran bi secondary lamps.

Iṣakoso iṣe ti nfa iwoye, pẹlu idaduro iyan ni ipaniyan.
Iṣiṣẹ afọwọṣe / abojuto ti awọn abajade isọdọtun nipasẹ awọn bọtini itusilẹ lori-ọkọ ati Awọn LED.

Heartbeat tabi igbakọọkan iwifunni “si tun-laaye”.
Yiyi Yipada Counter.
Aabo KNX: fun alaye alaye nipa iṣẹ ṣiṣe ati iṣeto ni aabo KNX, kan si afọwọṣe olumulo kan pato “Aabo KNX”, ti o wa ni apakan ọja ti Zennio web portal (www.zennio.com). MAXinBOX 24 v2 ko pẹlu iṣẹ ṣiṣe yii.

Akiyesi:
“ANNEX II. Awọn iṣẹ ṣiṣe fun awoṣe” fihan tabili kan bi akopọ ti awọn iṣẹ ṣiṣe ati nọmba awọn bulọọki iṣẹ ti awoṣe kọọkan.

Bẹrẹ-UP ATI AGBARA pipadanu

Lakoko ibẹrẹ ẹrọ, Prog./Test LED yoo seju ni awọ buluu fun iṣẹju diẹ ṣaaju ki ẹrọ naa ti ṣetan. Awọn aṣẹ ita kii yoo ṣiṣẹ ni akoko yii, ṣugbọn lẹhinna.
Da lori iṣeto ni, diẹ ninu awọn iṣe kan pato yoo tun ṣee ṣe lakoko ibẹrẹ. Fun example, awọn Integrator le ṣeto boya awọn o wu awọn ikanni yẹ ki o yipada si kan pato ipinle ati boya awọn ẹrọ yẹ ki o fi awọn ohun kan si awọn bosi lẹhin ti agbara imularada. Jọwọ kan si awọn apakan atẹle ti iwe yii fun awọn alaye siwaju sii.

Ni apa keji, nigbati ikuna agbara akero ba waye, MAXinBOX yoo da duro eyikeyi awọn iṣe isunmọtosi ati pe yoo ṣafipamọ ipo rẹ ki o le gba pada ni kete ti ipese agbara ba ti mu pada.
Fun awọn idi aabo, gbogbo awọn ikanni oju yoo duro (ie, awọn relays yoo ṣii) ti ipadanu agbara ba waye, lakoko ti awọn abajade kọọkan ati awọn olubasọrọ okun onifẹ yoo yipada si ipo kan pato ti a tunto ni ETS (ti o ba jẹ eyikeyi).

Iṣeto ni

GBOGBO

Lẹhin gbigbe wọle data ti o baamu ni ETS ati fifi ẹrọ kun si topology ti iṣẹ akanṣe ti o fẹ, ilana iṣeto bẹrẹ nipasẹ titẹ taabu Awọn paramita ti ẹrọ naa.

ETS PARAMETERISATION
Iboju parameterisable nikan ti o wa nipasẹ aiyipada jẹ Gbogbogbo. Lati iboju yii, o ṣee ṣe lati mu ṣiṣẹ / mu maṣiṣẹ gbogbo iṣẹ ṣiṣe ti o nilo.

Awọn abajade [alaabo / mu ṣiṣẹ] 1: jẹ ki o mu taabu “Awọn abajade” ṣiṣẹ ni apa osi. Wo apakan 2.2 fun alaye diẹ sii.
Awọn iṣẹ kannaa [alaabo / mu ṣiṣẹ]: jẹ ki o mu taabu “Awọn iṣẹ kannaa” ṣiṣẹ ni apa osi. Wo apakan 2.3 fun alaye diẹ sii.

Titunto si Light [alaabo / ṣiṣẹ]: kí o mu awọn taabu "Titunto si Light" lori osi akojọ. Wo apakan 2.4 fun alaye diẹ sii.
Si nmu Temporization [alaabo / sise]: kí o disables "Scene Temporization" taabu lori osi akojọ. Wo apakan 2.5 fun alaye diẹ sii.

Iṣakoso Afowoyi [alaabo / mu ṣiṣẹ]: jẹ ki o mu taabu “Iṣakoso Afowoyi” lori akojọ aṣayan osi. Wo apakan 2.6 fun alaye diẹ sii.
Heartbeat (Ifitonileti Alive Igbakọọkan) [alaabo / mu ṣiṣẹ]: paramita yii jẹ ki olupilẹṣẹ ṣafikun ohun kan-bit kan si iṣẹ akanṣe naa (“[Heartbeat] Ohun kan lati Firanṣẹ '1'”) ti yoo firanṣẹ lorekore pẹlu iye “1” si leti pe ẹrọ naa tun n ṣiṣẹ (ṣi wa laaye).
- Akiyesi: Ifiranṣẹ akọkọ lẹhin igbasilẹ tabi ikuna akero waye pẹlu idaduro ti o to awọn aaya 255, lati yago fun apọju ọkọ akero. Awọn ifiranšẹ atẹle yii baamu akoko ti a ṣeto.
Awọn nkan Imularada Ẹrọ (Firanṣẹ 0 ati 1): [alaabo / mu ṣiṣẹ]: paramita yii jẹ ki oluṣeto ṣiṣẹ awọn nkan ibaraẹnisọrọ tuntun meji (“[Heatbeat] Imularada Ẹrọ”), eyiti yoo firanṣẹ si ọkọ akero KNX pẹlu awọn iye “0” ati “1” lẹsẹsẹ nigbakugba ti ẹrọ ba bẹrẹ iṣẹ (fun example, lẹhin ti a bosi agbara ikuna). O ṣee ṣe lati parameterize idaduro kan [0…255] si fifiranṣẹ yii.
- Akiyesi: lẹhin igbasilẹ tabi ikuna ọkọ akero, fifiranṣẹ naa waye pẹlu idaduro to to awọn aaya 6,35 pẹlu idaduro parameterized, lati yago fun apọju ọkọ akero.
Ṣe afihan Awọn Ohun Ika Awọn Yipada Yipada Relay [alaabo / mu ṣiṣẹ]: jẹ ki awọn nkan ibaraẹnisọrọ meji le tọju nọmba awọn iyipada ti o ṣe nipasẹ ọkọọkan awọn relays (“[Relay X] Nọmba Awọn Yipada”) ati nọmba ti o pọju ti awọn iyipada ti a ṣe ni a iseju ("[Relay X] Awọn iyipada ti o pọju fun iṣẹju kan ").

Ojade
MAXinBOX 24 v2 / MAXinBOX 20 / MAXinBOX 16 v4 / MAXinBOX 12 / MAXinBOX 8 v4 actuator ṣafikun 24 / 20 / 16 / 12 / 8 awọn abajade isọdọtun, eyiti o le tunto bi:

Awọn abajade alakomeji ẹni kọọkan, eyiti o gba laaye iṣakoso ominira ti awọn ẹru (o ṣee ṣe lati ṣakoso to 24/20/16/12/8 awọn ẹru oriṣiriṣi, ni atele).
Awọn ikanni Shutter, eyiti ngbanilaaye ṣiṣakoso iṣipopada ti awọn oju tabi awọn afọju (o ṣee ṣe lati ṣakoso to awọn ikanni titiipa ominira 12/10/8/6/4, ni atele).
Awọn modulu Coil Fan, eyiti ngbanilaaye iṣakoso ti afẹfẹ ati àtọwọdá ti awọn ẹya okun onigi oniho meji (o ṣee ṣe lati ṣakoso to 6/5/4/3/2 awọn bulọọki igbafẹ afẹfẹ ominira, ni atele).

Fun alaye alaye nipa iṣẹ ṣiṣe ati iṣeto ti awọn paramita ti o jọmọ, jọwọ tọka si awọn itọnisọna pato atẹle, gbogbo wọn wa laarin apakan ọja ni Zennio webaaye (www.zennio.com):

Olukuluku awọn iyọrisi.
Awọn ikanni Shutter.
'Relays' Fan Coil. Ṣe akiyesi pe awọn ẹrọ wọnyi ṣe atilẹyin awọn coils fan oniho meji nikan pẹlu awọn falifu Titan/Pa. Nitorinaa, awọn itọkasi eyikeyi si awọn coils fan oni-paipu mẹrin ati awọn falifu-ojuami 3 ko kan wọn.

Awọn iṣẹ kannaa

Module yii jẹ ki o ṣee ṣe lati ṣe nọmba ati awọn iṣẹ alakomeji si awọn iye ti nwọle ti o gba lati ọkọ akero KNX ati lati firanṣẹ awọn abajade nipasẹ awọn nkan ibaraẹnisọrọ miiran ti o ṣiṣẹ ni pataki fun idi eyi.
Titi di 30 (ni MAXinBOX 24 / 20 / 12) / 20 (ni MAXinBOX 16 / 8 v4) oriṣiriṣi ati awọn iṣẹ ominira le ṣe imuse, ọkọọkan wọn jẹ isọdi patapata ati ti o to awọn iṣẹ ṣiṣe itẹlera mẹrin ni ọkọọkan.
Ipaniyan ti iṣẹ kọọkan le dale lori ipo atunto, eyiti yoo ṣe iṣiro ni gbogbo igba ti iṣẹ naa ba ṣiṣẹ nipasẹ kan pato, awọn nkan ibaraẹnisọrọ parameterisable. Abajade lẹhin ṣiṣe awọn iṣẹ ṣiṣe ti iṣẹ naa tun le ṣe iṣiro ni ibamu si awọn ipo kan ati lẹhinna firanṣẹ (tabi rara) si ọkọ akero KNX, eyiti o le ṣee ṣe ni gbogbo igba ti iṣẹ naa ba ṣiṣẹ, lorekore, tabi nikan nigbati abajade ba yatọ si ti o kẹhin.
Jọwọ tọka si iwe afọwọkọ olumulo “Awọn iṣẹ Logic”, ti o wa laarin MAXinBOX 24 v2 / MAXinBOX 20 / MAXinBOX 16 v4 / MAXinBOX 12 / MAXinBOX 8 v4 apakan ọja ni oju-ile Zennio, www.zennio.com, fun alaye alaye nipa iṣẹ ṣiṣe naa. ati iṣeto ni awọn paramita ti o ni ibatan.

Imọlẹ TITUNTO
Eyikeyi awọn awoṣe ṣe imuse Awọn Imọlẹ Titunto meji eyiti o le mu ṣiṣẹ ati tunto ni ominira.

Iṣẹ Imọlẹ Titunto mu aṣayan lati ṣe atẹle ipo ti o to awọn orisun ina 12 (tabi paapaa diẹ sii, ti o ba jẹ pe Awọn iṣakoso Imọlẹ Titunto lati awọn ẹrọ Zennio lọpọlọpọ ti sopọ papọ) tabi ti eyikeyi awọn eroja miiran ti ipo rẹ ti gbejade nipasẹ ohun alakomeji ati, ti o da lori awọn ipinlẹ yẹn, ṣe aṣẹ titunto si ni gbogbo igba ti a gba ifihan agbara kan (lẹẹkansi, iye alakomeji) nipasẹ ohun kan pato.

Iru aṣẹ titunto si yoo ni ninu:

Ibere pipaa gbogboogbo, ti o ba jẹ pe o kere ju ọkan ninu awọn ohun ipo to mejila ni a rii lati wa ni titan.
A iteriba yipada-lori ibere, ti o ba ti kò si ninu awọn soke si mejila ipo ohun ti wa ni ri lati wa lori.

Ṣe akiyesi pe pipa-pipa ti o wa loke ati awọn ibere-iyipada kii ṣe dandan ni iye alakomeji ti a firanṣẹ si ọkọ akero - o jẹ si oluṣepọ pinnu kini ohun ti yoo firanṣẹ si ọkọ akero KNX ni awọn ọran mejeeji: aṣẹ oju-ile, ibi-itumọ thermostat kan. tabi aṣẹ iyipada ipo, iye igbagbogbo, iṣẹlẹ kan… Nikan ohun ti nfa ati awọn ohun ipo mejila ni o nilo lati jẹ alakomeji (tan/paa). Oju iṣẹlẹ aṣoju julọ fun iṣakoso Imọlẹ Titunto si yoo jẹ yara hotẹẹli kan pẹlu bọtini titari tituntosi kan lẹgbẹẹ ẹnu-ọna. Nigbati o ba lọ kuro ni yara, alejo yoo ni awọn seese ti titẹ lori titunto si pushbutton ati ki o ṣe gbogbo lamps pa pọ. Lẹhinna, pada si yara ati pẹlu gbogbo lamps pa, titẹ awọn kanna titunto si pushbutton yoo nikan ṣe kan pato lamp tan-an (fun apẹẹrẹ, lamp si ẹnu-ọna) – eyi ni iteriba yipada-lori. Yato si, o jẹ ṣee ṣe lati concatenate meji tabi diẹ ẹ sii Titunto Light modulu nipasẹ kan pato ibaraẹnisọrọ ohun ti o duro fun awọn gbogboogbo ti awọn orisun ina ti kọọkan module. Nitorinaa, o ṣee ṣe lati faagun nọmba awọn orisun ina nipa gbigbero ipo gbogbogbo ti module kan bi orisun ina afikun fun omiiran.

ETS PARAMETERISATION
Ni kete ti iṣẹ Imọlẹ Titunto ba ti ṣiṣẹ, taabu kan yoo wa ninu akojọ aṣayan ni apa osi. Iboju paramita tuntun yii ni awọn aṣayan wọnyi ninu:

Nọmba Awọn nkan ti Ipinle [1…12]: ṣe asọye nọmba awọn nkan ipo 1-bit ti o nilo. Awọn nkan wọnyi ni a pe ni “[ML] Ipo Nkan. Ni afikun, ohun ipo gbogbogbo (“[ML] Ipo gbogbogbo”) yoo wa nigbagbogbo ni topology ise agbese. Yoo firanṣẹ si ọkọ akero pẹlu iye “1” nigbakugba ti o kere ju ọkan ninu awọn nkan ipinlẹ ti o wa loke pẹlu iru iye bẹẹ. Bibẹẹkọ (ie, ti ko ba si ọkan ninu wọn ti o ni iye “1”), yoo firanṣẹ pẹlu iye “0”.

Idiyele okunfa [0/1/0/1]: ṣeto iye ti yoo ma nfa, nigbati o ba gba nipasẹ “[ML] Trigger”, iṣẹ oluwa (pipa gbogboogbo tabi iteriba yipada-lori).
Gbogbogbo Yipada-Pa.
- Idaduro [0…255] [x 1 s]: asọye idaduro kan (ni kete ti a ti gba okunfa) ṣaaju ipaniyan ti piparẹ gbogbogbo. Iwọn iyọọda jẹ 0 si 255 awọn aaya.
- Alakomeji iye [alaabo/sise]: ti o ba ti ṣayẹwo, ohun "[ML] Gbogbogbo Yipada-pipa: Alakomeji Nkan" yoo wa ni sise, eyi ti yoo fi ọkan "0" nigbakugba ti awọn gbogboogbo yipada-pipa ni pipa.
- Wiwọn [alaabo/ṣiṣẹ]: ti o ba ṣayẹwo, ohun “[ML] Yipada gbogbogbo: Wiwọn” yoo ṣiṣẹ, eyiti yoo fi ipin ogorun kan ranṣẹtage iye (configurable ni Iye [0… 100]) nigbakugba ti gbogbo yipada-pipa ya ni pipa.
- Iwoye [alaabo / ṣiṣẹ]: ti o ba ṣayẹwo, ohun “[ML] Yipada gbogbogbo: Iwoye” yoo ṣiṣẹ, eyiti yoo firanṣẹ iṣẹlẹ kan ṣiṣe / fi aṣẹ pamọ (iṣeto ni Iṣe [Ṣiṣe / Fipamọ] ati Nọmba Iwoye [1… 64]) nigbakugba ti iyipada gbogbogbo ba ya
- HVAC [alaabo/ṣiṣẹ]: ti o ba ṣayẹwo, ohun “[ML] Yipada gbogbogbo: Ipo HVAC” yoo ṣiṣẹ, eyiti yoo fi iye ipo iwọn otutu HVAC ranṣẹ (ṣe atunto ni Iye [Aifọwọyi / Itunu / Imurasilẹ / Aje / Idaabobo Ile ) nigbakugba ti piparẹ gbogbogbo ba ya.
  Akiyesi: awọn aṣayan ti o wa loke kii ṣe iyasọtọ; o ṣee ṣe lati firanṣẹ awọn iye ti awọn ẹda oriṣiriṣi papọ.
Yipada Iteriba:
- Awọn paramita ti o wa nibi jẹ afọwọṣe patapata si awọn ti a mẹnuba tẹlẹ fun Yipada Gbogbogbo-Pa. Sibẹsibẹ, ninu ọran yii, awọn orukọ awọn nkan bẹrẹ pẹlu “[ML] Iteriba Yipada-On (…).” Ni apa keji, fifiranṣẹ awọn aṣẹ fifipamọ aaye ko ṣee ṣe fun iyipada iteriba (awọn aṣẹ lati mu awọn iwoye nikan ni o gba laaye).
- Akiyesi: ohun "[ML] Iteriba Yipada-On: Alakomeji Nkan" nfi awọn iye "1" (nigbati iteriba yipada-lori waye), ni idakeji, lati tako "[ML] Gbogbogbo Yipada-Pa: alakomeji Nkan ", eyi ti o rán iye "0" (nigba gbogbo yipada-pipa, bi a ti salaye loke).

IWỌRỌ IWỌRỌ

Ipilẹ akoko ipele n gba laaye awọn idaduro idaduro lori awọn oju iṣẹlẹ ti awọn abajade. Awọn idaduro wọnyi jẹ asọye ni awọn ayeraye ati pe o le lo si ipaniyan ti ọkan tabi diẹ sii awọn iwoye ti o le ti tunto.
Jọwọ jẹri ni lokan pe, bi ọpọlọpọ awọn iṣẹlẹ idaduro le tunto fun iṣelọpọ kọọkan / ikanni oju-itumọ / module okun onifẹfẹ, ni ọran gbigba aṣẹ lati ṣiṣẹ ọkan ninu wọn nigbati akoko akoko iṣaaju ṣi wa ni isunmọtosi fun iṣelọpọ / ikanni / modulu yẹn, iru temporization yoo wa ni Idilọwọ ati ki o nikan ni idaduro ati awọn igbese ti awọn titun si nmu yoo wa ni executed.

ETS PARAMETERISATION
Ṣaaju ki o to ṣeto iwọn otutu iṣẹlẹ, o jẹ dandan lati ni atunto ọkan tabi diẹ sii awọn iwoye ni diẹ ninu awọn abajade. Nigbati o ba nwọle window Iṣeto ni labẹ Imudaniloju Iwoye, gbogbo awọn oju iṣẹlẹ ti a tunto yoo wa ni akojọ, pẹlu awọn apoti ayẹwo diẹ lati yan eyi ti wọn nilo lati wa ni igba diẹ, bi o ṣe han ni Nọmba 5.

Ṣiṣe nọmba iṣẹlẹ kan n mu taabu tuntun kan pẹlu iru orukọ si akojọ aṣayan ni apa osi, lati eyiti o ṣee ṣe lati tunto iwọn akoko ti ipele yẹn fun ọkọọkan awọn abajade nibiti o ti tunto.

Nitorinaa, paramita “Iwoye m. Idaduro Z” [0…3600 [s] / 0…1440 [min] / 0…24 [h]], ṣalaye idaduro ti yoo lo si iṣẹ ti a ṣalaye ni Z fun ipaniyan ti ipele m (nibiti Z le wa kan pato olukuluku o wu, oju ikanni tabi àìpẹ okun module).

Akiyesi:
Ni awọn iṣeto ni ti a si nmu ti ohun o wu / oju ikanni / àìpẹ okun, o jẹ ṣee ṣe lati parameterize orisirisi awọn sile pẹlu kanna nmu nọmba. Eyi tumọ si pe ọpọlọpọ awọn paramita idaduro ti o ni nkan ṣe pẹlu iṣelọpọ kanna han ninu taabu iṣeto ti awọn idaduro ti iṣẹlẹ yẹn. Pẹlu paramita yii, ihuwasi yoo jẹ bi atẹle: iṣe ati idaduro ti ipele akọkọ parameterized pẹlu nọmba iwoye kanna yoo bori nigbagbogbo, nibiti aaye ti o ga julọ ti o ga julọ jẹ 1 (akọkọ ninu taabu iṣeto iṣẹlẹ) ati pe o kere julọ ni pataki. kẹhin.

Iṣakoso Afowoyi

MAXinBOX ngbanilaaye pẹlu ọwọ yiyipada ipo ti awọn iṣipopada iṣẹjade rẹ nipasẹ awọn bọtini itẹwe oniwun lori oke ẹrọ naa. Bọtini titari kan pato wa fun abajade.
Iṣiṣẹ afọwọṣe le ṣee ṣe ni awọn ọna oriṣiriṣi meji, ti a npè ni Idanwo Lori Ipo (fun awọn idi idanwo lakoko iṣeto ẹrọ) ati Ipo Paa idanwo (fun lilo deede, nigbakugba). Boya mejeeji, ọkan nikan, tabi ko si ọkan ninu awọn ipo wọnyi yẹ ki o wa awọn iwulo lati wa ni paramita ni ETS. Pẹlupẹlu, o ṣee ṣe lati mu ohun alakomeji kan pato fun titiipa ati ṣiṣi iṣakoso afọwọṣe ni akoko asiko.

Awọn akọsilẹ:

Ipo Idanwo Paa yoo ṣiṣẹ (ayafi ti o ba jẹ alaabo nipasẹ paramita) lẹhin igbasilẹ kan tabi tunto laisi iwulo fun imuṣiṣẹ kan pato - awọn bọtini titari yoo dahun si awọn titẹ olumulo lati ibẹrẹ.
Ni ilodi si, yi pada si Igbeyewo Lori ipo (ayafi ti alaabo nipasẹ paramita) nilo lati ṣee ṣe nipa titẹ gigun ti Prog/Bọtini idanwo (fun o kere ju awọn aaya mẹta), titi LED ko ni pupa mọ ki o yipada ofeefee. Lati akoko yẹn, ni kete ti bọtini naa ba ti tu silẹ, ina LED yoo wa ni alawọ ewe lati jẹrisi pe ẹrọ naa ti yipada lati ipo Titan Idanwo si Ipo Idanwo. Lẹhin iyẹn, titẹ afikun yoo tan ofeefee LED ati lẹhinna pa, ni kete ti bọtini ba ti tu silẹ. Ni ọna yii, ẹrọ naa fi ipo idanwo silẹ. Ṣe akiyesi pe yoo tun lọ kuro ni ipo yii ti ikuna agbara akero ba waye tabi ti titiipa iṣakoso afọwọṣe kan ba firanṣẹ lati ọkọ akero KNX.

Igbeyewo Pa Ipo
Labẹ Igbeyewo Paa Ipo, awọn abajade le jẹ iṣakoso nipasẹ mejeeji awọn nkan ibaraẹnisọrọ wọn ati awọn bọtini titari gangan ti o wa lori oke ẹrọ naa. Nigbati ọkan ninu awọn bọtini wọnyi ba tẹ, iṣẹjade yoo huwa bi ẹnipe aṣẹ ti gba nipasẹ ohun ibaraẹnisọrọ ti o baamu, da lori boya iṣelọpọ ti wa ni tunto bi boya abajade kọọkan, bi ikanni oju, tabi bi okun onifẹ.

Iṣẹjade ẹni kọọkan: kan ti o rọrun tẹ (kukuru tabi gun) yoo ṣe awọn ti o wu yipada awọn oniwe-lori-pipa ipinle, eyi ti yoo wa ni royin si KNX akero nipasẹ awọn ti o baamu ipo ohun ti o ba ti sise.
Ikanni Shutter: nigbati awọn bọtini ti wa ni titẹ, awọn ẹrọ yoo sise lori awọn wu ni ibamu si awọn ipari ti awọn bọtini tẹ ati awọn ti isiyi ipo.
- Titẹ gigun jẹ ki oju iboju bẹrẹ gbigbe (si oke tabi isalẹ, da lori bọtini ti a tẹ). LED yoo tan ni alawọ ewe titi ti opin išipopada naa. Ti bọtini naa ba tẹ ni oju-ọna ti o wa ni oke tabi isalẹ awọn ipo, ko si ohun ti yoo ṣẹlẹ (LED kii yoo tan).
- Titẹ kukuru yoo jẹ ki awakọ oju-ile duro (ti o ba wa ni išipopada), bi o ṣe ṣe deede nigbati o ba gba aṣẹ igbesẹ / idaduro lati ọkọ akero KNX. Ni ọran ti kii ṣe titiipa ni iṣipopada, titẹ bọtini ko fa eyikeyi iṣe, ayafi ti slats / lamellas ti jẹ parameterized - ni iru ọran naa, iṣipopada igbesẹ (oke / isalẹ, da lori bọtini ti a tẹ) yoo waye. Awọn nkan ipo yoo firanṣẹ si ọkọ akero nigbati o baamu.
Fan Coil module: ihuwasi yoo dale lori boya aami-afẹfẹ kan tabi àtọwọdá-aami ti tẹ bọtini:
- Àìpẹ: fun iru bọtini yii, o gbọdọ gbero pe awọn iru iṣakoso meji lo wa fun iyara afẹfẹ:
  - Iṣakoso iyipada: kukuru tabi gun tẹ yoo yipada awọn relays lati ṣeto iyara ti o yan ayafi ti o baamu iyara ti isiyi - ni iru ọran naa gbogbo awọn relays yoo ṣii (iyara 0). Awọn LED ti o somọ yoo tọkasi ipo ti awọn relays iṣakoso iyara àìpẹ (lori = yiyi pipade; pipa = ṣiṣi silẹ).
  - Iṣakoso ikojọpọ: kukuru tabi gun tẹ yipada si iyara ti o yan, pipade isọdọtun ti o ni nkan ṣe pẹlu iyara yẹn, ati awọn relays ti a sọtọ si awọn iyara kekere, ayafi ti o baamu iyara ti isiyi - ni iru ọran naa gbogbo awọn iṣipopada yoo ṣii (iyara 0). Awọn LED ti o somọ yoo ṣe afihan ipo ti awọn relays iṣakoso iyara àìpẹ (lori = yiyi pipade; pipa = ṣiṣi silẹ).
    Akiyesi: ihuwasi ti awọn relays yoo dale lori parameterization, ie, lori awọn nọmba ti àìpẹ iyara, ati idaduro laarin awọn yipada.
- Àtọwọdá: a kukuru tabi gun tẹ yoo yi awọn ti isiyi ipo ti awọn yii ati nitorina ti awọn àtọwọdá. LED naa yoo ṣe afihan ipo ti yiyi nigbakugba (lori = yiyi pipade; pipa = ṣiṣi silẹ).

Iṣẹjade alaabo: awọn abajade alaabo nipasẹ paramita kii yoo fesi si awọn titẹ bọtini labẹ Ipo Imudanwo.

Nipa titiipa, aago, itaniji ati awọn iṣẹ iṣẹlẹ, ẹrọ naa yoo huwa labẹ Ipo Idanwo bi o ti ṣe deede. Awọn titẹ bọtini lakoko ipo yii jẹ afiwera patapata si gbigba awọn aṣẹ ti o baamu lati ọkọ akero KNX.

Idanwo Lori Ipo
Lẹhin titẹ si Igbeyewo Lori ipo, yoo ṣee ṣe nikan lati ṣakoso awọn abajade nipasẹ awọn bọtini titẹ lori-ọkọ. Awọn aṣẹ ti a gba nipasẹ awọn nkan ibaraẹnisọrọ ni yoo kọbikita, pẹlu ominira ti ikanni tabi iṣelọpọ ti wọn koju si. Ti o da lori boya iṣelọpọ ti jẹ parameterized bi iṣelọpọ ẹni kọọkan tabi gẹgẹ bi apakan ti ikanni oju, awọn aati si awọn titẹ bọtini yoo yato.

Iṣẹjade ẹni kọọkan: kukuru tabi gun titẹ bọtini yoo commute awọn on-pipa ipinle ti awọn yii.
Ikanni Shutter: titẹ bọtini naa yoo jẹ ki awakọ oju gbe lọ si oke tabi isalẹ (da lori bọtini) titi bọtini yoo fi tu silẹ lẹẹkansi, nitorinaa foju foju kọju si ipo ti oju ati awọn akoko paramita. Fun awọn idi aabo, yiyi titipa kan ṣoṣo fun ikanni tiipa ni a gba laaye.
- Akiyesi: lẹhin ti o kuro ni Idanwo Lori ipo, awọn nkan ipo yoo gba awọn iye ti wọn ni pada ṣaaju titẹ Idanwo Lori. Bi ẹrọ naa ko ṣe mọ ipo gangan ti oju-ọna (bi awakọ oju ko pese esi eyikeyi), awọn iye wọnyi le ma ṣe afihan ipo gidi. Eyi le ṣe ipinnu nipasẹ ṣiṣe pipe gbigbe-soke tabi aṣẹ gbigbe-isalẹ, tabi nipa ṣiṣatunṣe ipo tiipa ni Ipo Idanwo Titi titi yoo fi baamu awọn nkan ipo.

Module Coil Fan: ihuwasi naa jọra si ti Ipo Idanwo Paa, botilẹjẹpe ninu ọran yii awọn iyara àìpẹ mẹta yẹ ki o wa.
Iṣẹjade alaabo: kukuru ati awọn titẹ gigun yoo yipada ipo ti isọdọtun ti o baamu. Ni ọran ti eyi jẹ ni pipade yii, lẹhinna awọn relays ti o ku ti bulọọki rẹ yoo ṣii, fun awọn idi aabo.

Gẹgẹbi a ti ṣalaye tẹlẹ ti ẹrọ naa ba wa ni Igbeyewo Lori Ipo, eyikeyi aṣẹ ti a firanṣẹ lati ọkọ akero KNX si oluṣeto kii yoo ni ipa lori awọn abajade ati pe ko si awọn nkan ipo ti yoo firanṣẹ (awọn nkan ti akoko lorekore gẹgẹbi Heartbeat, awọn iṣẹ ọgbọn tabi ina titunto si yoo tẹsiwaju). lati firanṣẹ si ọkọ akero) lakoko ti idanwo ON ti n ṣiṣẹ. Sibẹsibẹ, ninu ọran ti awọn ohun “Itaniji” ati “Dina”, botilẹjẹpe ni Idanwo ON ipo awọn iṣe ti o gba nipasẹ ohun kọọkan ko ṣe akiyesi, igbelewọn ipo wọn ni a ṣe nigbati wọn ba jade ni ipo yii ki eyikeyi iyipada ninu itaniji. ipo tabi didi awọn abajade lakoko ti Idanwo ON mode nṣiṣẹ ni a ṣe akiyesi nigbati o ba jade kuro ni ipo yii ati pe o ni imudojuiwọn pẹlu ipo to kẹhin ti a rii.

Pataki:
ẹrọ naa ti wa ni jiṣẹ lati ile-iṣẹ pẹlu gbogbo awọn abajade alaabo ati pẹlu awọn ipo afọwọṣe mejeeji (Igbeyewo Pa ati Titan Idanwo) ṣiṣẹ.

ETS PARAMETERISATION
Iṣakoso Afowoyi ti tunto lati taabu Iṣeto ni funrararẹ labẹ Iṣakoso Afowoyi. Awọn paramita meji nikan ni:

Iṣakoso afọwọṣe [Alaabo / Idanwo Nikan Paa Ipo / Idanwo Nikan Ni Ipo / Idanwo Paa Ipo + Idanwo Lori Ipo]. Da lori yiyan, ẹrọ naa yoo gba laaye ni lilo iṣakoso afọwọṣe labẹ Idanwo Pa a, Idanwo Lori, tabi awọn ipo mejeeji. Ṣe akiyesi pe, gẹgẹ bi a ti sọ tẹlẹ, lilo ipo pipaa Idanwo ko nilo eyikeyi iṣe pataki, lakoko ti o yipada si Igbeyewo Lori ipo nilo titẹ gigun ti Prog/Bọtini idanwo.

Titiipa Iṣakoso afọwọṣe [ṣiṣẹ / alaabo]: ayafi ti paramita ti o wa loke ti jẹ “Alaabo,” paramita Iṣakoso Afowoyi Titiipa pese ilana yiyan fun tiipa iṣakoso afọwọṣe ni akoko asiko. Nigbati apoti ayẹwo yii ba ti ṣiṣẹ, ohun naa “Titiipa Iṣakoso Afowoyi” yoo han, ati awọn aye meji diẹ sii:
- Iye [0 = Titiipa; 1 = Ṣii silẹ / 0 = Ṣii silẹ; 1 = Titiipa]: ṣalaye boya titiipa iṣakoso afọwọṣe / ṣiṣi silẹ yẹ ki o waye ni atele lori gbigba (nipasẹ nkan ti a mẹnuba) ti awọn iye “0” ati “1”, tabi idakeji.
- Ibẹrẹ [Ṣiṣii / Titiipa / Iye to kẹhin]: ṣeto bii ipo titiipa ti iṣakoso afọwọṣe yẹ ki o wa lẹhin ibẹrẹ ẹrọ (lẹhin igbasilẹ ETS tabi ikuna agbara ọkọ akero). “Iye ti o kẹhin” (aiyipada; ni ibẹrẹ akọkọ, eyi yoo jẹ ṣiṣi silẹ.

OHUN Ibaraẹnisọrọ

“Iwọn iṣẹ ṣiṣe” fihan awọn iye ti, pẹlu ominira ti eyikeyi awọn iye miiran ti a gba laaye nipasẹ ọkọ akero ni ibamu si iwọn ohun, le jẹ lilo eyikeyi tabi ni itumọ kan pato nitori awọn pato tabi awọn ihamọ lati mejeeji boṣewa KNX ati ohun elo naa. eto funrararẹ.

Akiyesi:
Diẹ ninu awọn nọmba ti o wa ninu iwe akọkọ jẹ nikan wulo fun diẹ ninu awọn awoṣe.

Nọmba	Iwọn	I/O	Awọn asia	Iru data (DPT)	Ibiti iṣẹ	Oruko	Išẹ
1	1 Bit	O	CR – T –	DPT_Okunfa	0/1	[Ohun ọkan] Nkan lati Firanṣẹ '1'	Fifiranṣẹ ti '1' Lokọọkan
2	1 Bit	O	CR – T –	DPT_Okunfa	0/1	[Heartbeat] Imularada ẹrọ	Firanṣẹ 0
3	1 Bit	O	CR – T –	DPT_Okunfa	0/1	[Heartbeat] Imularada ẹrọ	Firanṣẹ 1
4	1 Bit	I	C – W – –	DPT_E jeki	0/1	Titiipa Afowoyi Iṣakoso	0 = Titiipa; 1 = Ṣii silẹ
4	1 Bit	I	C – W – –	DPT_E jeki	0/1	Titiipa Afowoyi Iṣakoso	0 = Ṣii silẹ; 1 = Titiipa
5, 16, 27, 38, 49, 60, 71, 82. 93, 104, 115, 126, 137, 148, 159, 170, 181, 192, 203, 214, 225, 236, 247, 258	1 Baiti	I	C – W – –	Iṣakoso DPT_Scene	0-63; 128-191	[Ox] Awọn iṣẹlẹ	0 – 63 (Ṣiṣe 1 – 64); 128 – 191 (Fipamọ 1-64)
6, 17, 28, 39, 50, 61, 72, 83. 94, 105, 116, 127, 138, 149, 160, 171, 182, 193, 204, 215, 226, 237, 248, 259	1 Bit	I	C – W – –	DPT_BinaryValue	0/1	[Ox] Tan/Paa	RẸ̀ (0 = Ṣí Ìfilọlẹ̀; 1 = Ìsúnnisọ́nà)
	1 Bit	I	C – W – –	DPT_BinaryValue	0/1	[Ox] Tan/Paa	NC (0 = Isọdọtun-isunmọ; 1 = Ṣii Ayika)
7, 18, 29, 40, 51, 62, 73, 84. 95, 106, 117, 128, 139, 150, 161, 172, 183, 194, 205, 216, 227, 238, 249, 260	1 Bit	O	CR – T –	DPT_BinaryValue	0/1	[Ox] Tan/Pa (Ipo)	0 = Ijade jade; 1 = Titanjade
8, 19, 30, 41, 52, 63, 74, 85. 96, 107, 118, 129, 140, 151, 162, 173, 184, 195, 206, 217, 228, 239, 250, 261	1 Bit	I	C – W – –	DPT_E jeki	0/1	[Ox] Titiipa	0 = Ṣii silẹ; 1 = Titiipa
9, 20, 31, 42, 53, 64, 75, 86. 97, 108, 119, 130, 141, 152, 163, 174, 185, 196, 207, 218, 229, 240, 251, 262	1 Bit	I	C – W – –	DPT_Bẹrẹ	0/1	[Ox] Aago	0 = Yipada; 1 = Tan-an
10, 21, 32, 43, 54, 65, 76, 87, 98, 109, 120, 131, 142, 153, 164, 175, 186, 197, 208, 219, 230, 241, 252, 263	1 Bit	I	C – W – –	DPT_Bẹrẹ	0/1	[Ox] ìmọlẹ	0 = Duro; 1 = Bẹrẹ
11, 22, 33, 44, 55, 66, 77, 88, 99, 110, 121, 132, 143, 154, 165, 176, 187, 198,	1 Bit	I	C – W – –	DPT_Itaniji	0/1	[Ox] Itaniji	0 = Deede; 1 = Itaniji
	1 Bit	I	C – W – –	DPT_Itaniji	0/1	[Ox] Itaniji	0 = Itaniji; 1 = Deede

209, 220, 231, 242, 253, 264
12, 23, 34, 45, 56, 67, 78, 89, 100, 111, 122, 133, 144, 155, 166, 177, 188, 199, 210, 221, 232, 243, 254, 265	1 Bit	I	C – W – –	DPT_Ack	0/1	[Ox] Itaniji tu silẹ	Itaniji = 0 + Unfreeze = 1 => Itaniji Ipari
13, 24, 35, 46, 57, 68, 79, 90, 101, 112, 123, 134, 145, 156, 167, 178, 189, 200, 211, 222, 233, 244, 255, 266	1 Bit	O	CR – T –	DPT_Ipinlẹ	0/1	[Ox] Akoko Ikilọ (Ipo)	0 = Deede; 1 = Ikilọ
14, 25, 36, 47, 58, 69, 80, 91, 102, 113, 124, 135, 146, 157, 168, 179, 190, 201, 212, 223, 234, 245, 256, 267	4 Awọn baiti	I/O	CRWT –	DPT_LongDeltaTimeSec	-2147483648 – 2147483647	[Ox] Àkókò Iṣẹ́ (awọn)	Akoko ni Aaya
15, 26, 37, 48, 59, 70, 81, 92, 103, 114, 125, 136, 147, 158, 169, 180, 191, 202, 213, 224, 235, 246, 257, 268	2 Awọn baiti	I/O	CRWT –	DPT_TimePeriodHrs	0 – 65535	[Ox] Àkókò Ìṣiṣẹ́ (h)	Akoko ni Awọn wakati
269	1 Baiti	I	C – W – –	Iṣakoso DPT_Scene	0-63; 128-191	[Shutter] Awọn iṣẹlẹ	0 – 63 (Ṣiṣe 1 – 64); 128 – 191 (Fipamọ 1-64)
270, 302, 334, 366, 398, 430, 462, 494, 526, 558, 590	1 Bit	I	C – W – –	DPT_Updown	0/1	[Cx] Gbe	0 = Gbe soke; 1 = Isalẹ
271, 303, 335, 367, 399, 431, 463, 495, 527, 559, 591	1 Bit	I	C – W – –	DPT_Igbese	0/1	[Cx] Duro/Igbese	0 = Duro / Igbesẹ; 1 = Duro / Stepdown
271, 303, 335, 367, 399, 431, 463, 495, 527, 559, 591	1 Bit	I	C – W – –	DPT_Okunfa	0/1	[Cx] Duro	0 = Duro; 1 = Duro
272, 304, 336, 368, 400, 432, 464, 496, 528, 560, 592	1 Bit	I	C – W – –	DPT_Okunfa	0/1	[Cx] Iṣakoso yipada	0, 1 = Soke, Isalẹ tabi Duro, Da lori Ikẹhin Gbe
273, 305, 337, 369, 401, 433, 465, 497, 529, 561, 593	1 Bit	I	C – W – –	DPT_Okunfa	0/1	[Cx] Yipada Iṣakoso Soke	0, 1 = Soke tabi Duro, Da lori Ikẹhin Gbe
274, 306, 338, 370, 402, 434, 466, 498, 530, 562, 594	1 Bit	I	C – W – –	DPT_Okunfa	0/1	[Cx] Yipada Iṣakoso Si isalẹ	0, 1 = Isalẹ tabi Duro, Da lori Ikẹhin Gbe
275, 307, 339, 371, 403, 435, 467, 499, 531, 563, 595	1 Bit	I	C – W – –	DPT_E jeki	0/1	[Cx] Titiipa	0 = Ṣii silẹ; 1 = Titiipa
276, 308, 340, 372, 404, 436, 468, 500, 532, 564, 596	1 Baiti	I	C – W – –	DPT_Scale	0% - 100%	[Cx] Gbigbe Shutter	0% = Oke; 100% = Isalẹ

277, 309, 341, 373, 405,
437, 469, 501, 533, 565, 597	1 Baiti	O	CR – T –	DPT_Scale	0% - 100%	[Cx] Ipo Ipo (Ipo)	0% = Oke; 100% = Isalẹ
278, 310, 342, 374, 406,
438, 470, 502, 534, 566, 598	1 Baiti	I	C – W – –	DPT_Scale	0% - 100%	[Cx] Slats Ipo	0% = Ṣii; 100% = Pipade
279, 311, 343, 375, 407,
439, 471, 503, 535, 567, 599	1 Baiti	O	CR – T –	DPT_Scale	0% - 100%	[Cx] Ipo Slats (Ipo)	0% = Ṣii; 100% = Pipade
280, 312, 344, 376, 408,
440, 472, 504, 536, 568, 600	1 Bit	O	CR – T –	DPT_Yipada	0/1	[Cx] Yiyi Dide (Ipo)	0 = Ṣii; 1 = Pipade
281, 313, 345, 377, 409,
441, 473, 505, 537, 569, 601	1 Bit	O	CR – T –	DPT_Yipada	0/1	[Cx] Isọdọtun Isọdọtun (Ipo)	0 = Ṣii; 1 = Pipade
282, 314, 346, 378, 410,
442, 474, 506, 538, 570, 602	1 Bit	O	CR – T –	DPT_Yipada	0/1	Iyipo (Ipo) [Cx]	0 = Duro; 1 = Gbigbe
283, 315, 347, 379, 411,
443, 475, 507, 539, 571, 603	1 Bit	O	CR – T –	DPT_Updown	0/1	[Cx] Itọsọna Gbigbe (Ipo)	0 = Si oke; 1 = Sisale
284, 316, 348, 380, 412,	1 Bit	I	C – W – –	DPT_Yipada	0/1	[Cx] Aifọwọyi: Tan/Paa	0 = Titan; 1 = Pipa
444, 476, 508, 540, 572,	1 Bit	I	C – W – –	DPT_Yipada	0/1	[Cx] Aifọwọyi: Tan/Paa	0 = Titan; 1 = Pipa
444, 476, 508, 540, 572,	1 Bit	I	C – W – –	DPT_Yipada	0/1	[Cx] Aifọwọyi: Tan/Paa	0 = Paa; 1 = Titan
604	1 Bit	I	C – W – –	DPT_Yipada	0/1	[Cx] Aifọwọyi: Tan/Paa	0 = Paa; 1 = Titan
285, 317, 349, 381, 413,	1 Bit	O	CR – T –	DPT_Yipada	0/1	[Cx] Aifọwọyi: Tan/Pa (Ipo)	0 = Titan; 1 = Pipa
445, 477, 509, 541, 573,	1 Bit	O	CR – T –	DPT_Yipada	0/1	[Cx] Aifọwọyi: Tan/Pa (Ipo)	0 = Titan; 1 = Pipa
445, 477, 509, 541, 573,	1 Bit	O	CR – T –	DPT_Yipada	0/1	[Cx] Aifọwọyi: Tan/Pa (Ipo)	0 = Paa; 1 = Titan
605	1 Bit	O	CR – T –	DPT_Yipada	0/1	[Cx] Aifọwọyi: Tan/Pa (Ipo)	0 = Paa; 1 = Titan
286, 318, 350, 382, 414,
446, 478, 510, 542, 574, 606	1 Bit	I	C – W – –	DPT_Updown	0/1	[Cx] Aifọwọyi: Gbe	0 = Gbe soke; 1 = Isalẹ
287, 319, 351, 383, 415,	1 Bit	I	C – W – –	DPT_Igbese	0/1	[Cx] Aifọwọyi: Duro/Igbese	0 = Duro / Igbesẹ; 1 = Duro / Stepdown
447, 479, 511, 543, 575,	1 Bit	I	C – W – –	DPT_Igbese	0/1	[Cx] Aifọwọyi: Duro/Igbese	0 = Duro / Igbesẹ; 1 = Duro / Stepdown
447, 479, 511, 543, 575,	1 Bit	I	C – W – –	DPT_Okunfa	0/1	[Cx] Aifọwọyi: Duro	0 = Duro; 1 = Duro
607	1 Bit	I	C – W – –	DPT_Okunfa	0/1	[Cx] Aifọwọyi: Duro	0 = Duro; 1 = Duro
288, 320, 352, 384, 416,
448, 480, 512, 544, 576, 608	1 Baiti	I	C – W – –	DPT_Scale	0% - 100%	[Cx] Aifọwọyi: Gbigbe ipo	0% = Oke; 100% = Isalẹ
289, 321, 353, 385, 417,
449, 481, 513, 545, 577, 609	1 Baiti	I	C – W – –	DPT_Scale	0% - 100%	[Cx] Aifọwọyi: Slats Ipo	0% = Ṣii; 100% = Pipade
290, 322, 354, 386, 418,	1 Bit	I	C - WTU	DPT_Scene_AB	0/1	[Cx] Oorun / ojiji	0 = Oorun; 1 = Ojiji
450, 482, 514, 546, 578,	1 Bit	I	C - WTU	DPT_Scene_AB	0/1	[Cx] Oorun / ojiji	0 = Oorun; 1 = Ojiji
450, 482, 514, 546, 578,	1 Bit	I	C - WTU	DPT_Scene_AB	0/1	[Cx] Oorun / ojiji	0 = Ojiji; 1 = Oorun
610	1 Bit	I	C - WTU	DPT_Scene_AB	0/1	[Cx] Oorun / ojiji	0 = Ojiji; 1 = Oorun
291, 323, 355, 387, 419,	1 Bit	I	C - WTU	DPT_Heat_Cool	0/1	[Cx] Itutu / Alapapo	0 = Itutu; 1 = Alapapo
451, 483, 515, 547, 579,	1 Bit	I	C - WTU	DPT_Heat_Cool	0/1	[Cx] Itutu / Alapapo	0 = Itutu; 1 = Alapapo
451, 483, 515, 547, 579,	1 Bit	I	C - WTU	DPT_Heat_Cool	0/1	[Cx] Itutu / Alapapo	0 = Alapapo; 1 = Itutu
611	1 Bit	I	C - WTU	DPT_Heat_Cool	0/1	[Cx] Itutu / Alapapo	0 = Alapapo; 1 = Itutu

292, 324, 356, 388, 420, 452, 484, 516, 548, 580, 612	1 Bit	I	C - WTU	DPT_Onigbese	0/1	[Cx] Iwaju/Ko si Iwaju	0 = Ko si Iwaju; 1 = Iwaju
292, 324, 356, 388, 420, 452, 484, 516, 548, 580, 612	1 Bit	I	C - WTU	DPT_Onigbese	0/1	[Cx] Iwaju/Ko si Iwaju	0 = Iwaju; 1 = Ko si Iwaju
293, 294, 325, 326, 357, 358, 389, 390, 421, 422, 453, 454, 485, 486, 517, 518, 549, 550, 581, 582, 613, 614, 645, 646	1 Bit	I	C – W – –	DPT_Itaniji	0/1	[Cx] Itaniji x	0 = Ko si Itaniji; 1 = Itaniji
	1 Bit	I	C – W – –	DPT_Itaniji	0/1	[Cx] Itaniji x	0 = Itaniji; 1 = Ko si Itaniji
295, 327, 359, 391, 423, 455, 487, 519, 551, 583, 615	1 Bit	I	C – W – –	DPT_Ack	0/1	[Cx] Itaniji tu silẹ	Itaniji1 = Itaniji2 = Ko si Itaniji + Unfreeze (1) => Itaniji Ipari
296, 328, 360, 392, 424, 456, 488, 520, 552, 584, 616	1 Bit	I	C – W – –	DPT_Scene_AB	0/1	[Cx] Lọ (Yípadà)	0 = Isalẹ; 1 = Gbe soke
297, 329, 361, 393, 425, 457, 489, 521, 553, 585, 617	1 Bit	I	C – W – –	DPT_Ack	0/1	[Cx] Ipo taara 1	0 = Ko si Iṣe; 1 = Lọ si Ipo
298, 330, 362, 394, 426, 458, 490, 522, 554, 586, 618	1 Bit	I	C – W – –	DPT_Ack	0/1	[Cx] Ipo taara 2	0 = Ko si Iṣe; 1 = Lọ si Ipo
299, 331, 363, 395, 427, 459, 491, 523, 555, 587, 619	1 Bit	I	C – W – –	DPT_Ack	0/1	[Cx] Ipo taara 1 (Fipamọ)	0 = Ko si Iṣe; 1 = Fipamọ ipo lọwọlọwọ
300, 332, 364, 396, 428, 460, 492, 524, 556, 588, 620	1 Bit	I	C – W – –	DPT_Ack	0/1	[Cx] Ipo taara 2 (Fipamọ)	0 = Ko si Iṣe; 1 = Fipamọ ipo lọwọlọwọ
301, 333, 365, 397, 429, 461, 493, 525, 557, 589, 621	1 Bit	O	CR – T –	DPT_BinaryValue	0/1	[Cx] Ita olubasọrọ – Duro ronu	0 = Ṣii Atunse; 1 = Pa Relay
654	1 Baiti	I	C – W – –	Iṣakoso DPT_Scene	0-63; 128-191	[Fan Coil] Awọn iṣẹlẹ	0 – 63 (Ṣiṣe 1 – 64); 128 – 191 (Fipamọ 1-64)
655, 688, 721, 754, 787, 820	1 Bit	I	C – W – U	DPT_Yipada	0/1	[FCx] Tan/Pa a	0 = Paa; 1 = Titan
656, 689, 722, 755, 788, 821	1 Bit	O	CR – T –	DPT_Yipada	0/1	[FCx] Tan/Paa (Ipo)	0 = Paa; 1 = Titan
657, 690, 723, 756, 789, 822	1 Bit	I	C – W – U	DPT_Heat_Cool	0/1	[FCx] Ipo	0 = Itura; 1 = Ooru
658, 691, 724, 757, 790, 823	1 Bit	O	CR – T –	DPT_Heat_Cool	0/1	Ipo [FCx] (Ipo)	0 = Itura; 1 = Ooru
659, 692, 725, 758, 791, 824	1 Bit	I	C – W – U	DPT_E jeki	0/1	[FCx] àìpẹ: Afowoyi/laifọwọyi	0 = Aifọwọyi; 1 = Afowoyi
659, 692, 725, 758, 791, 824	1 Bit	I	C – W – U	DPT_E jeki	0/1	[FCx] àìpẹ: Afowoyi/laifọwọyi	0 = Afowoyi; 1 = Aifọwọyi
660, 693, 726, 759, 792, 825	1 Bit	O	CR – T –	DPT_E jeki	0/1	[FCx] Olufẹ: Afowoyi/Alaifọwọyi (Ipo)	0 = Aifọwọyi; 1 = Afowoyi
660, 693, 726, 759, 792, 825	1 Bit	O	CR – T –	DPT_E jeki	0/1	[FCx] Olufẹ: Afowoyi/Alaifọwọyi (Ipo)	0 = Afowoyi; 1 = Aifọwọyi

661, 694, 727, 760, 793, 826	1 Bit	I	C – W – U	DPT_Igbese	0/1	[FCx] Afowoyi Fan: Iṣakoso igbese	0 = Isalẹ; 1 = Soke
662, 695, 728, 761, 794, 827	1 Bit	I	C – W – U	DPT_Yipada	0/1	[FCx] Olufẹ afọwọṣe: Iyara 0	0 = Paa; 1 = Titan
663, 696, 729, 762, 795, 828	1 Bit	I	C – W – U	DPT_Yipada	0/1	[FCx] Olufẹ afọwọṣe: Iyara 1	0 = Paa; 1 = Titan
664, 697, 730, 763, 796, 829	1 Bit	I	C – W – U	DPT_Yipada	0/1	[FCx] Olufẹ afọwọṣe: Iyara 2	0 = Paa; 1 = Titan
665, 698, 731, 764, 797, 830	1 Bit	I	C – W – U	DPT_Yipada	0/1	[FCx] Olufẹ afọwọṣe: Iyara 3	0 = Paa; 1 = Titan
666, 699, 732, 765, 798, 831	1 Bit	O	CR – T –	DPT_Yipada	0/1	[FCx] Olufẹ: Iyara 0 (Ipo)	0 = Paa; 1 = Titan
667, 700, 733, 766, 799, 832	1 Bit	O	CR – T –	DPT_Yipada	0/1	[FCx] Olufẹ: Iyara 1 (Ipo)	0 = Paa; 1 = Titan
668, 701, 734, 767, 800, 833	1 Bit	O	CR – T –	DPT_Yipada	0/1	[FCx] Olufẹ: Iyara 2 (Ipo)	0 = Paa; 1 = Titan
669, 702, 735, 768, 801, 834	1 Bit	O	CR – T –	DPT_Yipada	0/1	[FCx] Olufẹ: Iyara 3 (Ipo)	0 = Paa; 1 = Titan
670, 703, 736, 769, 802, 835	1 Baiti	I	C – W – U	DPT_Fan_Stage	0 – 255	[FCx] Afowoyi Fan: Iṣakoso enumeration	S0 = 0; S1 = 1; S2 = 2; S3 = 3
	1 Baiti	I	C – W – U	DPT_Fan_Stage	0 – 255	[FCx] Afowoyi Fan: Iṣakoso enumeration	S0 = 0; S1 = 1; S2 = 2
	1 Baiti	I	C – W – U	DPT_Fan_Stage	0 – 255	[FCx] Afowoyi Fan: Iṣakoso enumeration	S0 = 0; S1 = 1
671, 704, 737, 770, 803, 836	1 Baiti	O	CR – T –	DPT_Fan_Stage	0 – 255	[FCx] Olufẹ: Iṣiro Iyara (Ipo)	S0 = 0; S1 = 1; S2 = 2; S3 = 3
	1 Baiti	O	CR – T –	DPT_Fan_Stage	0 – 255	[FCx] Olufẹ: Iṣiro Iyara (Ipo)	S0 = 0; S1 = 1; S2 = 2
	1 Baiti	O	CR – T –	DPT_Fan_Stage	0 – 255	[FCx] Olufẹ: Iṣiro Iyara (Ipo)	S0 = 0; S1 = 1
672, 705, 738, 771, 804, 837	1 Baiti	I	C – W – U	DPT_Scale	0% - 100%	[FCx] Afowoyi Fan: Ogoruntage Iṣakoso	S0 = 0%; S1 = 0,4-33,3%; S2 = 33,7- 66,7%; S3 = 67,1-100%
	1 Baiti	I	C – W – U	DPT_Scale	0% - 100%	[FCx] Afowoyi Fan: Ogoruntage Iṣakoso	S0 = 0%; S1 = 1-50%; S2 = 51-100%
	1 Baiti	I	C – W – U	DPT_Scale	0% - 100%	[FCx] Afowoyi Fan: Ogoruntage Iṣakoso	S0 = 0%; S1 = 1-100%
673, 706, 739, 772, 805, 838	1 Baiti	O	CR – T –	DPT_Scale	0% - 100%	[FCx] àìpẹ: iyara ogoruntage (Ipo)	S0 = 0%; S1 = 33,3%; S2 = 66,6%; S3 = 100%
	1 Baiti	O	CR – T –	DPT_Scale	0% - 100%	[FCx] àìpẹ: iyara ogoruntage (Ipo)	S0 = 0%; S1 = 1-50%; S2 = 51-100%
	1 Baiti	O	CR – T –	DPT_Scale	0% - 100%	[FCx] àìpẹ: iyara ogoruntage (Ipo)	S0 = 0%; S1 = 1-100%
674, 707, 740, 773, 806, 839	1 Baiti	I	C – W – U	DPT_Scale	0% - 100%	[FCx] itutu Fan: lemọlemọfún Iṣakoso	0 – 100%
674, 707, 740, 773, 806, 839	1 Baiti	I	C – W – U	DPT_Scale	0% - 100%	[FCx] Itutu agbaiye: Iṣakoso PI (Tẹsiwaju)	0 – 100%
	1 Baiti	I	C – W – U	DPT_Scale	0% - 100%	[FCx] alapapo Fan: lemọlemọfún Iṣakoso	0 – 100%

675, 708, 741, 774, 807, 840	1 Baiti	I	C – W – U	DPT_Scale	0% - 100%	[FCx] Àtọwọdá alapapo: Iṣakoso PI (Tẹsiwaju)	0 – 100%
676, 709, 742, 775, 808, 841	1 Bit	I	C – W – U	DPT_Ṣisunmọ	0/1	[FCx] Àtọwọdá itutu: Ayipada Iṣakoso (1 bit)	0 = Ṣiṣii Àtọwọdá; 1 = Close àtọwọdá
676, 709, 742, 775, 808, 841	1 Bit	I	C – W – U	DPT_Yipada	0/1	[FCx] Àtọwọdá itutu: Ayipada Iṣakoso (1 bit)	0 = Close àtọwọdá; 1 = Ṣii Àtọwọdá
677, 710, 743, 776, 809, 842	1 Bit	I	C – W – U	DPT_Ṣisunmọ	0/1	[FCx] Àtọwọdá alapapo: Ayipada Iṣakoso (1 bit)	0 = Ṣiṣii Àtọwọdá; 1 = Close àtọwọdá
677, 710, 743, 776, 809, 842	1 Bit	I	C – W – U	DPT_Yipada	0/1	[FCx] Àtọwọdá alapapo: Ayipada Iṣakoso (1 bit)	0 = Close àtọwọdá; 1 = Ṣii Àtọwọdá
678, 711, 744, 777, 810, 843	1 Bit	O	CR – T –	DPT_Ṣisunmọ	0/1	[FCx] Itutu agbaiye (Ipo)	0 = Ṣii; 1 = Pipade
	1 Bit	O	CR – T –	DPT_Yipada	0/1	[FCx] Itutu agbaiye (Ipo)	0 = Pipade; 1 = Ṣii
	1 Bit	O	CR – T –	DPT_Ṣisunmọ	0/1	[FCx] Àtọwọdá (Ipò)	0 = Ṣii; 1 = Pipade
	1 Bit	O	CR – T –	DPT_Yipada	0/1	[FCx] Àtọwọdá (Ipò)	0 = Pipade; 1 = Ṣii
679, 712, 745, 778, 811, 844	1 Bit	O	CR – T –	DPT_Ṣisunmọ	0/1	[FCx] Àtọwọdá Alapapo (Ipo)	0 = Ṣii; 1 = Pipade
679, 712, 745, 778, 811, 844	1 Bit	O	CR – T –	DPT_Yipada	0/1	[FCx] Àtọwọdá Alapapo (Ipo)	0 = Pipade; 1 = Ṣii
680, 713, 746, 779, 812, 845	1 Bit	O	CR – T –	DPT_Yipada	0/1	[FCx] Àtọwọdá itutu: Idaabobo Atako (Ipo)	0 = Ko Ṣiṣẹ; 1 = Ti nṣiṣe lọwọ
680, 713, 746, 779, 812, 845	1 Bit	O	CR – T –	DPT_Yipada	0/1	[FCx] Àtọwọdá: Idaabobo Atako (Ipo)	0 = Ko Ṣiṣẹ; 1 = Ti nṣiṣe lọwọ
681, 714, 747, 780, 813, 846	1 Bit	O	CR – T –	DPT_Yipada	0/1	[FCx] Àtọwọdá gbigbona: Idaabobo Alatako (Ipo)	0 = Ko Ṣiṣẹ; 1 = Ti nṣiṣe lọwọ
682, 715, 748, 781, 814, 847	1 Baiti	O	CR – T –	DPT_Scale	0% - 100%	[FCx] Àtọwọdá (Ipò)	0 – 100%
682, 715, 748, 781, 814, 847	1 Baiti	O	CR – T –	DPT_Scale	0% - 100%	[FCx] Itutu agbaiye (Ipo)	0 – 100%
683, 716, 749, 782, 815, 848	1 Baiti	O	CR – T –	DPT_Scale	0% - 100%	[FCx] Àtọwọdá Alapapo (Ipo)	0 – 100%
684, 717, 750, 783, 816, 849	1 Bit	O	CR – T –	DPT_Bool	0/1	[FCx] Iṣakoso iye – Aṣiṣe	0 = Ko si Asise; 1 = Aṣiṣe
685, 718, 751, 784, 817, 850	2 Awọn baiti	I	C – W – U	DPT_Value_Temp	-273.00º – 670433.28º	[FCx] Ibaramu otutu	Ibaramu otutu
686, 719, 752, 785, 818, 851	2 Awọn baiti	I	C – W – U	DPT_Value_Temp	-273.00º – 670433.28º	[FCx] Setpoint otutu	Setpoint otutu
687, 720, 753, 786, 819, 852	2 Awọn baiti	I/O	CRWTU	DPT_TimePeriodMin	0 – 65535	[FCx] Iye akoko Iṣakoso Afowoyi	0 = Ailopin; 1 – 1440 iseju
687, 720, 753, 786, 819, 852	2 Awọn baiti	I/O	CRWTU	DPT_TimePeriodHrs	0 – 65535	[FCx] Iye akoko Iṣakoso Afowoyi	0 = Ailopin; 1 – 24 wakati
853, 854, 855, 856, 857, 858, 859, 860, 861, 862, 863, 864, 865, 866, 867, 868, 869, 870, 871, 872, 873, 874, 875, 876, 877, 878, 879, 880, 881, 882, 883, 884, 885, 886, 887, 888, 889, 890, 891, 892, 893, 894, 895, 896, 897,	1 Bit	I	C – W – –	DPT_Bool	0/1	[LF] (1-Bit) Data Titẹ sii x	Wiwọle Data alakomeji (0/1)

898, 899, 900, 901, 902, 903, 904, 905, 906, 907, 908, 909, 910, 911, 912, 913, 914, 915, 916
917, 918, 919, 920, 921, 922, 923, 924, 925, 926, 927, 928, 929, 930, 931, 932, 933, 934, 935, 936, 937, 938, 939, 940, 941, 942, 943, 944, 945, 946, 947	1 Baiti	I	C – W – –	DPT_Iye_1_Ucount	0 – 255	[LF] (1-baiti) Data Titẹsi x	1-Baiti Titẹ sii Data (0-255)
949, 950, 951, 952, 953, 954, 955, 956, 957, 958, 959, 960, 961, 962, 963, 964, 965, 966, 967, 968, 969, 970, 971, 972, 973, 974, 975, 976, 977, 978, 979	2 Awọn baiti	I	C – W – –	DPT_Iye_2_Ucount	0 – 65535	[LF] (2-baiti) Data Titẹsi x	2-Baiti Data titẹsi
	2 Awọn baiti	I	C – W – –	DPT_Iye_2_Count	-32768 – 32767	[LF] (2-baiti) Data Titẹsi x	2-Baiti Data titẹsi
	2 Awọn baiti	I	C – W – –	9.xxx	-671088.64 – 670433.28	[LF] (2-baiti) Data Titẹsi x	2-Baiti Data titẹsi
981, 982, 983, 984, 985, 986, 987, 988, 989, 990, 991, 992, 993, 994, 995, 996	4 Awọn baiti	I	C – W – –	DPT_Iye_4_Count	-2147483648 – 2147483647	[LF] (4-baiti) Data Titẹsi x	4-Baiti Data titẹsi
997, 998, 999, 1000, 1001, 1002, 1003, 1004, 1005, 1006, 1007, 1008, 1009, 1010, 1011, 1012, 1013, 1014, 1015, 1016, 1017, 1018, 1019, 1020, 1021, 1022, 1023, 1024, 1025, 1026	1 Bit	O	CR – T –	DPT_Bool	0/1	[LF] Iṣẹ x - Abajade	(1-Bit) Bolianu
	1 Baiti	O	CR – T –	DPT_Iye_1_Ucount	0 – 255	[LF] Iṣẹ x - Abajade	(1-Byte) Ti ko forukọsilẹ
	2 Awọn baiti	O	CR – T –	DPT_Iye_2_Ucount	0 – 65535	[LF] Iṣẹ x - Abajade	(2-Byte) Ti ko forukọsilẹ
	4 Awọn baiti	O	CR – T –	DPT_Iye_4_Count	-2147483648 – 2147483647	[LF] Iṣẹ x - Abajade	(4-baiti) wole
	1 Baiti	O	CR – T –	DPT_Scale	0% - 100%	[LF] Iṣẹ x - Abajade	(1-baiti) ogoruntage
	2 Awọn baiti	O	CR – T –	DPT_Iye_2_Count	-32768 – 32767	[LF] Iṣẹ x - Abajade	(2-baiti) wole
	2 Awọn baiti	O	CR – T –	9.xxx	-671088.64 – 670433.28	[LF] Iṣẹ x - Abajade	(2-baiti) leefofo
1027, 1029, 1031, 1033, 1035, 1037, 1039, 1041, 1043, 1045, 1047, 1049, 1051, 1053, 1055, 1057, 1059, 1061, 1063, 1065, 1067, 1069, 1071, 1073	4 Awọn baiti	O	CR – T –	DPT_Iye_4_Ucount	0 – 4294967295	[Relay x] Nọmba ti Yipada	Nọmba ti Yipada
1028, 1030, 1032, 1034, 1036, 1038, 1040, 1042, 1044, 1046, 1048, 1050, 1052, 1054, 1056, 1058, 1060, 1062, 1064, 1066, 1068, 1070, 1072, 1074	2 Awọn baiti	O	CR – T –	DPT_Iye_2_Ucount	0 – 65535	[Relay x] Awọn Yipada to pọju fun Iṣẹju	O pọju Yipada fun iseju
1075	1 Bit	I	C – W – –	DPT_Okunfa	0/1	[MLx] okunfa	Ṣe okunfa Iṣẹ Imọlẹ Titunto
1075	1 Bit	I	C – W – –	DPT_Ack	0/1	[MLx] okunfa	0 = Ko si nkan; 1 = Nfa Titunto Light Išė

	1 Bit	I	C – W – –	DPT_Ack	0/1	[MLx] okunfa	1 = Ko si nkan; 0 = Nfa Titunto Light Išė
1076, 1077, 1078, 1079, 1080, 1081, 1082, 1083, 1084, 1085, 1086, 1087, 1098, 1099, 1100, 1101, 1102, 1103, 1104, 1105, 1106, 1107, 1108, 1109	1 Bit	I	C – W – –	DPT_Yipada	0/1	[MLx] Ipo Nkan x	Ipo alakomeji
1088	1 Bit	O	CR – T –	DPT_Yipada	0/1	[MLx] Gbogbogbo Ipo	Ipo alakomeji
1089	1 Bit		C – T –	DPT_Yipada	0/1	[MLx] Gbogbogbo Yipada Paa: Nkan alakomeji	Yipada Paa Fifiranṣẹ
1090	1 Baiti		C – T –	DPT_Scale	0% - 100%	[MLx] Gbogbogbo Yipada Paa: Iwọn iwọn	0-100%
1091	1 Baiti		C – T –	Iṣakoso DPT_Scene	0-63; 128-191	[MLx] Gbogbogbo Yipada Pa: Si nmu	Fifiranšẹ si nmu
1092	1 Baiti		C – T –	DPT_HVCMode	1=Itunu 2=Iduroṣinṣin 3=Aje 4=Idaabobo Ilé	[MLx] Gbogbogbo Yipada Paa: Ipo HVAC	Aifọwọyi, Itunu, Imurasilẹ, Iṣowo, Idaabobo Ile
1093	1 Bit		C – T –	DPT_Yipada	0/1	[MLx] Iteriba Yipada Lori Alakomeji Nkan	Yipada Lori Fifiranṣẹ
1094	1 Baiti		C – T –	DPT_Scale	0% - 100%	[MLx] Iteriba Yipada Lori Wiwọn	0-100%
1095	1 Baiti		C – T –	Nọmba DPT_Scene	0 – 63	[MLx] Iteriba Yipada Lori Si nmu	Fifiranšẹ si nmu
1096	1 Baiti		C – T –	DPT_HVCMode	1=Itunu 2=Iduroṣinṣin 3=Aje 4=Idaabobo Ilé	[MLx] Iteriba Yipada Lori HVAC mode	Aifọwọyi, Itunu, Imurasilẹ, Iṣowo, Idaabobo Ile

Awọn iṣẹ ṣiṣe fun awoṣe

MAXinBOX 24 v2		MAXinBOX 20	MAXinBOX 16 v4	MAXinBOX 12	MAXinBOX 8 v4
Olukuluku awọn iyọrisi	24	20	16	12	8
Awọn ikanni Shutter	12	10	8	6	4
Meji-pipe àìpẹ okun modulu	6	5	4	3	2
Logic awọn iṣẹ	30	30	20	30	20
Titunto si ina Iṣakoso modulu	2	2	2	2	2
Okan lu
Awọn oju iṣẹlẹ
Relay yipada counter
Iṣakoso ọwọ
KNX Aabo

Table 1. Awọn iṣẹ-ṣiṣe fun awoṣe

Darapọ mọ ki o fi awọn ibeere rẹ ranṣẹ si wa nipa awọn ẹrọ Zennio:
https://support.zennio.com.

Zennio Avance ati Tecnología SL
C / Río Jarama, 132. Nave P-8.11 45007 Toledo, Spain.
Tẹli. +34 925 232 002
www.zennio.com
info@zennio.com.

Awọn iwe aṣẹ / Awọn orisun

Zennio ZIOMB24V2 MAXinBOX Awọn abajade KNX Actuator [pdf] Afọwọkọ eni
ZIOMB24V2 MAXinBOX Imujade KNX Actuator, ZIOMB24V2, MAXinBOX Awọn igbejade KNX Actuator

Awọn itọkasi

Itọsọna olumulo

Zennio ZIOMB24V2 MAXinBOX Awọn abajade KNX Actuator

ọja Alaye