SOLIGHT DT34A Timer with Dusk Sensor
FAQs
- Q: Can I use this timer outdoors?
- A: Yes, the device can be used indoors or outdoors with an IP44 protection rating.
- Q: Kini MO le ṣe ti ẹrọ ba bajẹ?
- A: If the device is damaged, do not attempt to repair it yourself. Contact the manufacturer’s service department for assistance.
Ọja ALAYE
Thank you for purchasing our dusk sensor timer. Please read this manual carefully and pay attention to the safety warnings and instructions before using the device. This will ensure not only the protection of persons but also the long term viability of the device
Imọ paramu ETERS
| Input/wu voltage | 230V |
| Ilọjade ti o pọju | 16A |
| O pọju fifuye | 3680W |
| Ìyí ti agbegbe | IP44 |
| Awọn iwọn otutu ti nṣiṣẹ | -10°C si 40°C |
| Nọmba awọn ipo iṣẹ | 6 (On / twilight sensor / 2 h / 4 h / 6 h / 8 h) |
| To activate the dusk sensor | 5-15lux |
| To deactivate the dusk sensor | 30-70lux |
Apejuwe ti awọn ẹrọ
- dusk sensor
- Atọka agbara LED
- iyipo yipada
- twilight mode (on after dark)
- OFF – The device is switched OFF
- ON – The device is switched ON
- 2Hr, 4Hr, 6Hr and 8Hr – selected program
CONTROL AND START-UP
Connect the device to the mains, after switching on the LED power indicator will light up. Turn the knob to select the desired program.
Awọn eto:
- OFF – switching OFF the device
- ON – switching ON the device (without dimming sensor)
- DUSK/DAWN – switching on the device from dusk to dawn, activation by the dusk sensor (5-15lx.)
- 2 hrs – switching on the device for 2 hours, from the activation of the twilight sensor
- 4 hrs – switching on the device for 4 hours, from the activation of the twilight sensor
- 6 hrs – switching on the device for 6 hours, from the activation of the twilight sensor
- 8 hrs – switching on the device for 8 hours, from the activation of the twilight sensor
To ensure proper operation, do not cover the dusk sensor or place it within the range of artificial light. Switching on the lighting (for more than 8 seconds and with a light intensity of 30-70 lux) switches off the twilight sensor and the selected program. The program restarts when the lighting is switched off.
SAFETY N OTICE
- Read and keep the instructions for use carefully.
- Use of the equipment contrary to the instructions for use may cause damage to the equipment, fire, electric shock, or other danger to the user.
- The manufacturer Solight Holding, s.r.o. is not liable for damages caused by improper use of the equipment.
- Before use, check the device for damage, if it is, claim it.
- Do not open, disassemble or repair the equipment. All repairs may only be carried out by the manufacturer’s service department.
- The device can be used indoors or outdoors, the product’s degree of protection is IP44.
- Protect the equipment from drops, shocks, high and low temperatures, direct sunlight, chemicals, flammable and other factors that could affect the operation of the equipment.
- Always clean the device with a dry and soft cloth. Do not use abrasive cleaners, alcohol, solvents or other strong cleaning agents.
- Jeki ẹrọ naa kuro ni arọwọto awọn ọmọde ati ẹranko.
- Do not connect appliances whose total power exceeds the permissible load (16 A, 3680 W) and appliances containing heating elements (cookers, toasters, irons, etc.) to the timer socket.
- Ma ṣe so ẹrọ pọ mọ awọn okun itẹsiwaju.
OHUN SIWAJU
A ti fun ọja naa pẹlu ikede CE ti ibamu ni ibamu pẹlu awọn ilana to wulo. Lori ibeere lati ọdọ olupese: info@solight.cz, tabi gbaa lati ayelujara lati www.solight.cz/en.
Awọn iwe aṣẹ / Awọn orisun
 |
SOLIGHT DT34A Timer with Dusk Sensor [pdf] Ilana itọnisọna DT34A Timer with Dusk Sensor, DT34A, Timer with Dusk Sensor, Dusk Sensor, Sensor |
 |
SOLIGHT DT34A Timer With Dusk Sensor [pdf] Afọwọkọ eni DT34A Timer With Dusk Sensor, DT34A, Timer With Dusk Sensor, Dusk Sensor, Sensor |