Awọn akoonu tọju

1 RGB-RD-UM-D8 E003 Igbejade Scaler ati Switcher LED fidio isise

2.2 Awọn ilana Lilo ọja

2.2.1 Awọn oniṣẹ Aabo Lakotan

2.3 FAQ

2.3.1 Q: Kini MO le ṣe ti ọja ko ba ni agbara lori?

2.3.2 Q: Ṣe Mo le ṣiṣẹ ẹrọ naa laisi ideri ti a fi sii?

2.3.3 Awọn iwe aṣẹ / Awọn orisun

2.3.3.1 Awọn itọkasi

RGB-RD-UM-D8 E003 Igbejade Scaler ati Switcher LED fidio isise

ọja Alaye

Awọn pato

Article No: RGB-RD-UM-D8

Atunse No: V1.4
Power Source: Up to 230 volts rms

Awọn ilana Lilo ọja

Awọn oniṣẹ Aabo Lakotan

Alaye aabo gbogbogbo ni akopọ yii wa fun iṣẹ ṣiṣe
eniyan.

Maṣe Yọ Awọn ideri tabi Awọn Paneli kuro: Ko si
user-serviceable parts within the unit. Removal of the top cover
will expose dangerous voltages. To avoid personal injury, do not
remove the top cover. Do not operate the unit without the cover
fi sori ẹrọ.

Orisun Agbara: Ọja yi ti wa ni ti a ti pinnu lati
operate from a power source that will not apply more than 230 volts
rms laarin awọn oludari ipese tabi laarin awọn oludari ipese mejeeji
and ground. A protective ground connection by way of grounding
conductor in the power cord is essential for safe operation.
Ilẹ ọja naa: Ọja yii jẹ
grounded through the grounding conductor of the power cord. To
avoid electrical shock, plug the power cord into a properly wired
receptacle before connecting to the product input or output
terminals. A protective-ground connection by way of the grounding
conductor in the power cord is essential for safe operation.

FAQ

Q: Kini MO le ṣe ti ọja ko ba ni agbara lori?

A: Make sure the power source is providing the correct voltage
and that the power cord is properly plugged into a grounded
receptacle. If the issue persists, contact our support team for
iranlowo.

Q: Ṣe Mo le ṣiṣẹ ẹrọ naa laisi ideri ti a fi sii?

A: Rara, kii ṣe ailewu lati ṣiṣẹ ẹyọkan laisi ideri
fi sori ẹrọ bi o ti le fi lewu voltages. Always ensure the
cover is securely in place before using the product.

View Fullscreen

D8
Itọsọna olumulo
Ko si nkan: RGB-RD-UM-D8 E003 Atunyẹwo No: V1.4

Àkóónú
CONTENTS ………………………………………………………………………………………………………………………………….1 Declarations ………………………………………………………………………………………………………………………………..1
FCC/Warranty ……………………………………………………………………………………………………………………….. 1 Operators Safety Summary …………………………………………………………………………………………………….. 2 Installation Safety Summary …………………………………………………………………………………………………….2
Chapter 1 Your Product ……………………………………………………………………………………………………………….4 1.1 Packing Configuration ………………………………………………………………………………………………………. 4 1.2 Product Overview …………………………………………………………………………………………………………….. 5 1.2.1 Front Panel …………………………………………………………………………………………………………….. 5 1.2.2 Rear Panel ………………………………………………………………………………………………………………6 1.2.3 Dimension ……………………………………………………………………………………………………………….7 1.3 Key Features …………………………………………………………………………………………………………………….8
Chapter 2 Install Your Product ……………………………………………………………………………………………………. 9 2.1 Plug in Power ……………………………………………………………………………………………………………………9 2.2 Connect Signal Source and Control Computer ……………………………………………………………………. 9 2.3 Turn on Your Product ……………………………………………………………………………………………………….. 9
Chapter 3 Use Your Product ……………………………………………………………………………………………………… 10 3.1 Main Menu …………………………………………………………………………………………………………………….. 10 3.1.1 Device …………………………………………………………………………………………………………………..10 3.1.2 Settings …………………………………………………………………………………………………………………10 3.1.3 Load Presets ………………………………………………………………………………………………………… 21 3.1.4 Language ………………………………………………………………………………………………………………22 3.1.5 Version ………………………………………………………………………………………………………………….23 3.1.6 Input ……………………………………………………………………………………………………………………..23 3.2 XPOSE 2.0 Installation ……………………………………………………………………………………………………. 24 3.3 XPOSE 2.0 Operation …………………………………………………………………………………………………….. 27 3.3.1 Login in XPOSE ……………………………………………………………………………………………………. 27 3.3.2 System Setting ……………………………………………………………………………………………………… 28 3.3.3 Output|Input|Overview …………………………………………………………………………………………… 32 3.3.4 Display Management …………………………………………………………………………………………….. 35 3.3.5 Layer Management ……………………………………………………………………………………………….. 37 3.3.6 Preset Management ……………………………………………………………………………………………….40
Chapter 4 Order Codes ………………………………………………………………………………………………………………42 4.1 Product Code …………………………………………………………………………………………………………………. 42
Chapter 5 Support ……………………………………………………………………………………………………………………..43 5.1 Contact Us …………………………………………………………………………………………………………………….. 43
Chapter 6 Appendix ………………………………………………………………………………………………………………….. 44 6.1 Specification ……………………………………………………………………………………………………………………44
© Xiamen RGBlink Imọ & Imọ-ẹrọ Co., Ltd. Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com
1

6.2 Terms & Definitions ………………………………………………………………………………………………………….46 6.3 Revision History ………………………………………………………………………………………………………………51
© Xiamen RGBlink Imọ & Imọ-ẹrọ Co., Ltd. Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com
2

O ṣeun fun yiyan ọja wa! Itọsọna olumulo yii jẹ apẹrẹ lati fihan ọ bi o ṣe le lo ọja yii ni iyara ati lo gbogbo awọn ẹya. Jọwọ ka gbogbo awọn itọnisọna ati ilana ni pẹkipẹki ṣaaju lilo ọja yii.
Awọn ikede
FCC / atilẹyin ọja
Federal Communications Commission (FCC) Gbólóhùn
Ohun elo yii ti ni idanwo ati rii lati ni ibamu pẹlu awọn opin fun ẹrọ oni-nọmba kan kilasi kan, ni ibamu si Apá 15 ti awọn ofin FCC. Awọn opin wọnyi jẹ apẹrẹ lati pese aabo to bojumu si kikọlu ipalara nigbati ohun elo ba ṣiṣẹ ni agbegbe iṣowo kan. Ẹrọ yii n ṣe ipilẹṣẹ, nlo, ati pe o le tan agbara ipo igbohunsafẹfẹ redio ati, ti ko ba fi sii ati lo ni ibamu pẹlu itọnisọna itọnisọna, o le fa kikọlu ipalara si awọn ibaraẹnisọrọ redio. Ṣiṣẹ ẹrọ yi ni agbegbe ibugbe le fa kikọlu ipalara, ninu ọran ti olumulo yoo ṣe iduro fun atunṣe eyikeyi kikọlu.
Ẹri ati Biinu
RGBlink n pese iṣeduro ti o jọmọ iṣelọpọ pipe gẹgẹbi apakan ti awọn ofin iṣeduro ti ofin. Ni gbigba, olutaja gbọdọ ṣayẹwo lẹsẹkẹsẹ gbogbo awọn ẹru ti a firanṣẹ fun ibajẹ ti o ṣẹlẹ lakoko gbigbe, ati fun ohun elo ati awọn aṣiṣe iṣelọpọ. RGBlink gbọdọ jẹ alaye lẹsẹkẹsẹ ni kikọ eyikeyi awọn ẹdun ọkan. Akoko iṣeduro bẹrẹ ni ọjọ gbigbe ti awọn ewu, ni ọran ti awọn eto pataki ati sọfitiwia ni ọjọ ifiṣẹṣẹ, ni awọn ọjọ 30 tuntun lẹhin gbigbe awọn ewu. Ni iṣẹlẹ ti akiyesi idalare ti ifaramọ, RGBlink le ṣe atunṣe aṣiṣe tabi pese aropo ni lakaye tirẹ laarin akoko ti o yẹ. Ti iwọn yii ba fihan pe ko ṣee ṣe tabi ko ṣaṣeyọri, olura le beere idinku ninu idiyele rira tabi ifagile ti adehun naa. Gbogbo awọn iṣeduro miiran, ni pataki awọn ti o jọmọ isanpada fun ibajẹ taara tabi aiṣe-taara, ati ibajẹ ti a sọ si iṣẹ ṣiṣe ti sọfitiwia ati si iṣẹ miiran ti a pese nipasẹ RGBlink, ti o jẹ paati ti eto tabi iṣẹ ominira, yoo jẹ pe ko wulo ti a pese. ibajẹ naa ko jẹ ẹri lati jẹ ikasi si isansa ti awọn ohun-ini ti o ni iṣeduro ni kikọ tabi nitori idi tabi aibikita nla tabi apakan ti RGBlink. Ti olura tabi ẹnikẹta ba ṣe awọn iyipada tabi awọn atunṣe lori awọn ẹru ti a firanṣẹ nipasẹ RGBlink, tabi ti awọn ẹru naa ba ni itọju ti ko tọ, ni pataki ti awọn ọna ṣiṣe ba ṣiṣẹ ni aṣiṣe tabi ti o ba jẹ pe, lẹhin gbigbe awọn eewu, awọn ẹru wa labẹ awọn ipa ko gba lori iwe adehun, gbogbo awọn iṣeduro iṣeduro ti olura yoo jẹ asan. Ko si ninu iṣeduro iṣeduro jẹ awọn ikuna eto eyiti o jẹ ika si awọn eto tabi ẹrọ itanna pataki ti a pese nipasẹ ẹniti o ra, fun apẹẹrẹ awọn atọkun. Yiya deede bi daradara bi itọju deede ko si labẹ iṣeduro ti a pese nipasẹ RGBlink boya. Awọn ipo ayika bi daradara bi iṣẹ ati awọn ilana itọju ti a ṣalaye ninu iwe afọwọkọ yii gbọdọ wa ni ibamu pẹlu alabara.
© Xiamen RGBlink Imọ & Imọ-ẹrọ Co., Ltd. Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com
1

Awọn oniṣẹ Aabo Lakotan
Alaye aabo gbogbogbo ni akopọ yii wa fun oṣiṣẹ ti nṣiṣẹ.
Maṣe Yọ Awọn ideri tabi Awọn Paneli kuro
Ko si awọn ẹya iṣẹ olumulo laarin ẹyọkan. Yiyọ ti oke ideri yoo fi lewu voltages. Lati yago fun ipalara ti ara ẹni, ma ṣe yọ ideri oke kuro. Ma ṣe ṣiṣẹ ẹrọ naa laisi ideri ti a fi sii.
Orisun agbara
Ọja yii jẹ ipinnu lati ṣiṣẹ lati orisun agbara ti kii yoo lo diẹ sii ju 230 volts rms laarin awọn oludari ipese tabi laarin mejeeji adaorin ipese ati ilẹ. Asopọ ilẹ aabo nipasẹ ọna ti ilẹ adaorin ni okun agbara jẹ pataki fun ailewu isẹ.
Ilẹ ọja naa
Ọja yi ti wa ni ilẹ nipasẹ awọn grounding adaorin ti agbara okun. Lati yago fun mọnamọna itanna, pulọọgi okun agbara sinu apo ti a firanṣẹ daradara ṣaaju ki o to sopọ si titẹ ọja tabi awọn ebute iṣelọpọ. Asopọ ilẹ-aabo nipasẹ ọna ti oludari ilẹ ni okun agbara jẹ pataki fun iṣẹ ailewu.
Lo Okun Agbara to dara
Lo okun agbara nikan ati asopo ti a sọ fun ọja rẹ. Lo okun agbara nikan ti o wa ni ipo ti o dara. Tọkasi okun ati awọn iyipada asopo si oṣiṣẹ oṣiṣẹ to peye.
Lo Fiusi to dara
Lati yago fun eewu ina, lo fiusi nikan ti o ni iru kanna, voltage Rating, ati lọwọlọwọ Rating abuda. Tọkasi rirọpo fiusi si oṣiṣẹ oṣiṣẹ to peye.
Maṣe Ṣiṣẹ ni Awọn Afẹfẹ Ibẹjadi
Lati yago fun bugbamu, ma ṣe ṣiṣẹ ọja yi ni bugbamu bugbamu.
Fifi sori Aabo Lakotan
Awọn iṣọra Aabo
Fun gbogbo awọn ilana fifi sori ẹrọ, jọwọ ṣe akiyesi aabo pataki atẹle ati awọn ofin mimu lati yago fun ibajẹ si ararẹ ati ohun elo. Lati daabobo awọn olumulo lọwọ ina mọnamọna, rii daju pe chassis naa sopọ mọ ilẹ nipasẹ okun waya ilẹ ti a pese ni okun agbara AC. Awọn AC Socket-iyọọda yẹ ki o wa fi sori ẹrọ nitosi ohun elo ati ki o wa ni irọrun wiwọle.
© Xiamen RGBlink Imọ & Imọ-ẹrọ Co., Ltd. Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com
2

Unpacking ati ayewo
Ṣaaju ṣiṣi apoti gbigbe ẹrọ, ṣayẹwo fun ibajẹ. Ti o ba ri eyikeyi bibajẹ, leti awọn ti ngbe sowo lẹsẹkẹsẹ fun gbogbo awọn atunṣe ẹtọ. Bi o ṣe ṣii apoti, ṣe afiwe awọn akoonu rẹ si isokuso iṣakojọpọ. Ti o ba ri eyikeyi shortages, kan si rẹ tita asoju. Ni kete ti o ba ti yọ gbogbo awọn paati kuro ninu apoti wọn ati ṣayẹwo pe gbogbo awọn paati ti a ṣe akojọ wa, wo eto naa ni oju lati rii daju pe ko si ibajẹ lakoko gbigbe. Ti ibajẹ ba wa, leti lẹsẹkẹsẹ ti o gbejade fun gbogbo awọn atunṣe ẹtọ.
Igbaradi Aye
Ayika ninu eyiti o fi sori ẹrọ ẹrọ rẹ yẹ ki o jẹ mimọ, tan ina daradara, ni ominira lati aimi, ati ni agbara to peye, fentilesonu, ati aaye fun gbogbo awọn paati.
© Xiamen RGBlink Imọ & Imọ-ẹrọ Co., Ltd. Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com
3

Chapter 1 Ọja rẹ
1.1 Iṣakojọpọ Iṣeto
D8

1 x AC agbara USB

1 x Cable Nẹtiwọọki

1 x DB9 si okun USB

1 x DB9 to RJ11 Cable

1 x 8K HDMI Okun

D8 PLUS
1 x AC agbara USB

1 x Cable Nẹtiwọọki

1 x DB9 si okun USB

1 x DB9 to RJ11 Cable

1 x 8K HDMI Okun

1 x 8K DP Cable

Akiyesi: Okun Agbara AC ti a pese bi boṣewa ni ibamu si ọja ibi-ajo.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

1.2 Ọja Loriview
Ẹya D nigbagbogbo ni a gba bi adari ni sisẹ didara aworan ipele igbejade ni oriṣiriṣi ifihan stages ninu awọn ile ise. D8 tẹsiwaju lati ṣe itọsọna imọ-ẹrọ ifihan lati di ero isise fidio ipele 8K@60 ninu ile-iṣẹ naa. Ṣẹda a visual iriri. D8 jẹ boṣewa pẹlu ọkan HDMI 2.1 ni wiwo input ati D8 PLUS jẹ boṣewa pẹlu ọkan HDMI 2.1 ni wiwo input ati ọkan DP 1.4 ni wiwo input, eyi ti o le pade awọn ibeere ti 8K input ifihan agbara gbigbe. D jara ni ipese pẹlu a 4-inch LCD iboju ifọwọkan, eyi ti o optimizes awọn ìwò iwaju nronu darapupo oniru.

1.2.1 Igbimọ iwaju
Agbeko Oke Etí

Aworan ohun elo D8
Afi ika te

Agbeko Oke Etí

Oruko
Fọwọkan iboju agbeko Oke Etí Kapa

Apejuwe
4-inch LCD iboju ifọwọkan faye gba o lati taara sakoso D8, eyi ti o optimizes awọn olumulo iriri. Lo pẹlu awọn skru ti o ni ẹru lati ṣatunṣe ẹrọ lori agbeko. Fun gbigbe ẹrọ.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

1.2.2 ru Panel
D8 Interface Olugbeja Power Yipada

Ni wiwo Olugbeja

Ni wiwo Agbara Ilẹ D8 (DP 1.4)

Input Interface O wu Interface Communication Interface

Ni wiwo Olugbeja Power Yipada Power Interface

Ni wiwo Olugbeja

Ilẹ dabaru

Atọka Input

O wu Interface Communication Interface

Oruko

Apejuwe

D8 jẹ boṣewa pẹlu Nikan HDMI 2.1 Input Interface

Atọka Input

D8 PLUS jẹ boṣewa pẹlu Nikan HDMI 2.1 Input Interface ati Nikan DP 1.4

Atọka Input

O wu Interface

Standard pẹlu Quad HDMI 2.0 o wu Ports

Ibaraẹnisọrọ Interface

Boṣewa pẹlu 1xRS 232 Serial Port1xLAN Network Port 1xIN-GENLOCK-LOOP Port

Ọlọpọọmídíà Interface

So okun agbara boṣewa pọ si ẹrọ ati pulọọgi sinu iho odi

Agbara Yipada Interface Olugbeja Ilẹ dabaru

Tan-an tabi pa ẹrọ naa
Ti a lo lati fa ẹrọ jade, ṣatunṣe awọn kebulu ati aabo awọn atọkun lati ijamba Mu aabo ati igbẹkẹle pọ si, ati yago fun awọn ijamba bii ina ati bugbamu ti o ṣẹlẹ nipasẹ ina aimi

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

1.2.3 Iwọn
Atẹle ni iwọn fun itọkasi rẹ: Iwọn: 484mm×378mm×88.9mm
D8
D8 PLUS

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

1.3 Key Awọn ẹya ara ẹrọ
8K@60 input Support signal switch between two 8K@60 inputs Built-in 4” LCD touch screen control 8K EDID management Genlock synchronization unequal splicing, multiple splicing layouts available Layer cropping and scaling Genlock input and loop throuch XPOSE 2.0 control Support standard output resolution and customize output resolution Hot swap open API

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

Chapter 2 Fi ọja rẹ sori ẹrọ
Akiyesi: D8 ati D8 PLUS jẹ kanna ni fifi sori ẹrọ. Yi ipin gba D8 bi example.
2.1 Pulọọgi ni Power
So agbara ati D8 pẹlu boṣewa Power Okun. Pulọọgi ọkan opin okun agbara si D8 ká ni wiwo agbara. Ipari miiran ti sopọ si iho agbara.
2.2 So ifihan agbara orisun ati Kọmputa Iṣakoso
D8 atilẹyin HDMI 2.1DP 1.4 igbewọle ati HDMI 2.0 o wu. So D8 pọ pẹlu Kamẹra, PC, kọǹpútà alágbèéká bi ifihan agbara titẹ sii, so D8 pọ pẹlu awọn diigi, bi o ṣe han ninu nọmba ni isalẹ. Ṣaaju ki o to so awọn ifihan agbara pọ si D8, rii daju pe gbogbo awọn ẹrọ wa ni pipa ni akọkọ, ati lẹhinna Mu awọn skru asopo / awọn titiipa ni ibiti o ti pese.

D8 ṣe atilẹyin iṣakoso XPOSE 2.0, nitorinaa o jẹ dandan lati so ẹrọ pọ pẹlu kọnputa iṣakoso. Ṣe taara asopọ nipasẹ Serial Asopọ. So RS232 ibudo ti ẹrọ ati kọmputa pẹlu okun ni tẹlentẹle.
2.3 Tan Ọja rẹ

Titari agbara yipada lori ru nronu ati awọn eto bẹrẹ lati sise.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

Abala 3 Lo Ọja Rẹ
3.1 Akojọ aṣyn akọkọ
Tan-an agbara yipada lori ẹgbẹ ẹhin ati iboju ifọwọkan yoo han Akojọ aṣyn ati nọmba ni tẹlentẹle SN. Bi o ṣe han ninu nọmba ti o wa ni isalẹ, MENU pẹlu Ẹrọ, Eto, Fifuye, Ede (Gẹẹsi / Ṣaina Irọrọ) , Ẹya ati Input.

3.1.1 Ẹrọ
Tẹ lati tẹ awọn wọnyi ni wiwo. Ni wiwo, awọn olumulo le ṣayẹwo Input ati Iṣajade Ipo ati ipinnu.

Bi o han ni awọn isiro loke, awọn ti o ga ti DP 1.4 input ibudo 7680×4320@60, ati awọn ti o wu o ga jẹ 3840×2160@60.
3.1.2 Eto
Ti o ba ti isiyi ni wiwo ni , tẹ , iyẹn ni, aṣayan akojọ aṣayan iṣaaju lati pada si wiwo iṣaaju, bi o ṣe han ninu nọmba ni isalẹ.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

Akiyesi:
Iru si awọn iṣẹ ti o wa loke, ti wiwo lọwọlọwọ ba jẹ <Eto>, <Fifuye>, , <Ẹya> tabi <Input>, kan tẹ aṣayan iṣaaju lati pada si wiwo iṣaaju ni igbese-nipasẹ-igbesẹ titi ti o fi pada si Akojọ aṣyn akọkọ.
Tẹ lati tẹ awọn wọnyi ni wiwo. Ni wiwo, awọn olumulo le ṣeto Ipinnu Ijade, yan Ifilelẹ Pipin, ṣe Isakoso EDID, ṣeto Igbin Layer ati paramita Scaling ati ṣe Atunto Factory.

3.1.2.1 O ga
Tẹ ninu lati ṣeto ipinnu iṣẹjade. O le yan Ipinnu Standard tabi Ipinnu Aṣa.

Standard Ipinnu
Tẹ lati yan boṣewa o ga lati apoti.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

Tẹ "Tẹ" lati fipamọ ati iboju ifọwọkan pada si wiwo iṣaaju fun ọ lati ṣayẹwo lẹẹmeji.
Ṣe akanṣe Ipinnu
Tẹ lati tẹ awọn wọnyi ni wiwo.
D8 ṣe atilẹyin lati ṣe akanṣe ipinnu iṣẹjade. Ti o ba ṣeto ipinnu naa si 3840×2160@50, tẹ ni Iwọn, Giga ati Igbohunsafẹfẹ ọkan nipasẹ ọkan ki o tẹ "Tẹ" lati fipamọ. Lẹhinna ṣayẹwo ipinnu ti a ṣeto sinu ni wiwo.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

3.1.2.2 Pipin
Ti o ba ti isiyi ni wiwo ni , tẹ , iyẹn ni, aṣayan akojọ aṣayan iṣaaju lati pada si wiwo iṣaaju, bi o ṣe han ninu nọmba ni isalẹ.

Tẹ lati yan ifilelẹ splicing ati tunto awọn paramita.

Awọn ipo pipin mẹta wa, pẹlu Cross, H 3/1 ati V 4/1.

Pipin Ipo

Apejuwe

Agbelebu

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

H 1/4
V 1/4
Akiyesi: A ṣeto D8 si Agbelebu nipasẹ aiyipada. Agbelebu Tẹ ati iboju ifọwọkan yoo han bi atẹle:

Ṣeto Apapọ H, Apapọ V, Iwọn 1 ati Giga 1 ti iboju ni ibamu si iwulo gangan. Fun example: Ṣeto H Total si 7680, V Lapapọ si 4320, Iwọn 1 si 3840, Giga 1 si 2160, lẹhinna Iwọn 2 jẹ 3840, kanna bi Iwọn 1, Giga 2 jẹ 2169, kanna bi Giga 1.
H Total: 7680 V Total: 4320 Width 1: 3840 Height 1: 2160 Use the numeric keyboard to enter parameters, then click “Save Settings” > “Confirm” to save above settings.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

H 1/4 Tẹ ati iboju ifọwọkan yoo han bi atẹle:
Ṣeto Apapọ H, Apapọ V, Iwọn 1, Iwọn 2 ati Iwọn 3 ti iboju ni ibamu si iwulo gangan. Fun example: Ṣeto H Total to 12000, V Total to 2160, Giga 1 ni 2160, kanna bi V lapapọ. Ṣeto Iwọn 1 si 3500, Iwọn 2 si 3840, Iwọn 3 si 2160, ati Iwọn 4 yoo jẹ 2500 (H lapapọ <12000> - Iwọn 1 <3500> - Iwọn 2 <3840>> = Iwọn 3 <2160th> 4>).
H Total: 12000 V Total: 2160 Width 1: 3500 Width 2: 3840 Width 3: 2160 Use the numeric keyboard to enter parameters, then click “Save Settings” > “Confirm” to save above settings.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

V 1/4 Tẹ ati iboju ifọwọkan yoo han bi atẹle:

Ṣeto Apapọ H, Apapọ V, Giga 1, Giga 2 ati Giga 3 ti iboju ni ibamu si iwulo gangan. Fun example: Ṣeto H Total to 3840, V Total to 6480, iwọn 1 ni 3840, kanna bi H lapapọ. Ṣeto Giga 1 si 2160, Giga 2 si 1080, Giga 3 si 1920, ati Giga 4 yoo jẹ 1320 (V lapapọ <6480> - Giga 1 <2160> - Giga 2 <1080>> Giga 3 <1920> = Giga 4 < 1320>).
H Total 3840 V Total 6480 Height 12160 Height 21080 Height 31920 Use the numeric keyboard to enter parameters, then click “Save Settings” > “Confirm” to save above settings.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

3.1.2.3 EDID
Pada si , lẹhinna tẹ fun EDID isakoso.
Ṣe akanṣe EDID Yan ati iboju ifọwọkan yoo han bi atẹle:
Ti o ba ṣeto ipinnu si 7000×4000@60, lo bọtini itẹwe nọmba lati tẹ Iwọn, Giga ati Igbohunsafẹfẹ ọkan nipasẹ ọkan lẹhinna tẹ "Tẹ" lati jẹrisi.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

Ṣayẹwo awọn iye ṣeto, lẹhinna tẹ ” Waye” > “Jẹrisi”.
Pari awọn eto EDID lori D8, lẹhinna ṣeto ipinnu lori orisun ifihan (bii kọnputa) lati jẹ kanna bi D8. Ti o ba ṣeto EDID lori D8 si 7000×4000@60, awọn igbesẹ lati ṣeto ipinnu lori kọnputa jẹ bi atẹle:
Igbesẹ 1: Ṣeto ipinnu lori kaadi eya aworan. Mu NVIDIA bi example: Ọtun-tẹ lori tabili, ki o si yan "NVIDIA Iṣakoso Panel".

Igbesẹ 2: Tẹ “Ifihan”> “Iyipada Iyipada”.
- Ni akọkọ, ṣayẹwo boya 7000×4000@60 ni a le rii ninu atokọ-silẹ. Yan ipinnu yii taara ti 7000 × 4000@60 wa laisi awọn iwulo lati tẹle Igbesẹ 3 si Igbesẹ 5 lati ṣe akanṣe ipinnu.

- Ti 7000 × 4000@60 ko ba le rii, jọwọ tẹ “Ṣe akanṣe” lẹhinna tẹle Igbesẹ 3 si Igbesẹ 5 fun

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

eto ipinnu.
Igbesẹ 3: Tẹ "Ṣẹda Ipinnu Aṣa".
Igbesẹ 4: Ṣe akanṣe ipinnu Tẹ 7000 ni “awọn piksẹli petele”, 4000 ni “awọn laini inaro” ati 60 ni “oṣuwọn isọdọtun”. Tẹ awọn iye ipinnu aṣa, lẹhinna tẹ “Idanwo”. Yan "Bẹẹni" ni agbejade lati lo ipinnu aṣa.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

Igbesẹ 5: Lẹhinna ipinnu ṣeto yoo han ni “Aṣa”. Tẹ "O DARA" ati ṣayẹwo ipinnu ni wiwo "Change Resolution".

Tun EDID Tunto Tẹ “Tun EDID”>” Jẹrisi” lati ko awọn eto iṣaaju kuro.
3.1.2.4 Layer
Pada si , lẹhinna tẹ lati tẹ awọn wọnyi ni wiwo.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

Awọn olumulo le ṣe Layer Scaling ati Cropping.
Tẹ ipo petele, Ipo inaro, Iwọn ati Giga bi o ṣe nilo. Lẹhinna tẹ “Awọn Eto Fipamọ”> “Jẹrisi” lati ṣafipamọ awọn paramita loke.

3.1.2.5 Atunto ile-iṣẹ
Pada si , lẹhinna tẹ lati tẹ awọn wọnyi ni wiwo.

Ṣiṣe atunto ile-iṣẹ kan yoo pa gbogbo data olumulo rẹ ati awọn eto ti ara ẹni lori ẹrọ naa ki o da pada si ipo ibẹrẹ rẹ.
Akiyesi: Gbogbo awọn paramita yoo pada si awọn paramita aiyipada, eyiti o pẹlu ṣugbọn kii ṣe opin si IP ẹrọ, EDID, awọn iwoye tito tẹlẹ, ati bẹbẹ lọ.
3.1.3 fifuye tito
Pada si wiwo akọkọ, lẹhinna tẹ lati fifuye awọn tito tẹlẹ.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

D8 pese awọn ipo 16 fun fifipamọ awọn banki, eyiti o gba ọ laaye lati gbe.
Akiyesi
Ipilẹ ofeefee: banki lọwọlọwọ; Ipilẹ alawọ ewe: pẹlu paramita ti o fipamọ; Gray lẹhin: ofo bank.
Tẹ banki ti o fẹ, ati wiwo yoo gbe jade “Ṣe o fẹ lati fifuye Bank X”, ti o han bi isalẹ. Tẹ lati ṣe aṣayan.

Akiyesi
Jọwọ ṣe Eto Iwoye ni XPOSE 2.0 ni akọkọ ati lẹhinna o le gbe banki.
3.1.4 Ede
Pada si wiwo akọkọ, lẹhinna tẹ fun iyipada ede.

Yan Gẹẹsi tabi Kannada Irọrun, ati wiwo olumulo yoo yipada ni ibamu.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

3.1.5 Ẹya
Pada si wiwo akọkọ, lẹhinna tẹ fun ohun loriview ti Panel Version ati Main Board Version.

Iṣagbewọle 3.1.6
Pada si wiwo akọkọ, lẹhinna tẹ fun input ifihan agbara yipada.

Olumulo le ṣayẹwo ipinnu titẹ sii nibi. Lati yi ifihan agbara titẹ sii, o le tẹ orisun titẹ sii ti o fẹ, ati pe ifihan yoo muuṣiṣẹpọ yiyi pada gẹgẹbi ifihan agbara titẹ sii ti o yan.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

3.2 XPOSE 2.0 fifi sori
Awọn ibeere Ayika: Oluṣeto Window: 1 GHz tabi loke 32 bit tabi 64 bit processor Iranti: 4 GB tabi diẹ ẹ sii Awọn aworan: Atilẹyin DirectX 9 128M tabi loke (ipa AERO ṣiṣi) Aaye disk lile: Loke 16G (awọn ipin akọkọ, ọna kika NTFS) Atẹle: Ipinnu gbọdọ jẹ 1920 × 1080 pixel tabi loke (ko le ṣe afihan deede ti ipinnu ba kere ju 1920×1080) Eto iṣẹ: Windows 7 tabi loke (ẹya kikun, kii ṣe Ẹya Ẹmi tabi ẹya iwapọ) Sipiyu:i5 ati loke Mac Atẹle : Ipinnu gbọdọ jẹ 1680 × 1050 pixel tabi loke (ko le ṣe afihan deede ti ipinnu ba kere ju 1680×1050) Sipiyu: i5 ati loke

1. Double tẹ

, yoo gbe jade ni insitola

apoti ede, yan ede, fun example, yan "English", ki o si tẹ "O DARA" lati jẹrisi.

2. Tẹ "Next"lati fi sori ẹrọ.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

3. Tẹ “Ṣawari…” lati yan sọfitiwia XPOSE fi ipo sori ẹrọ. Tẹ "Fi sori ẹrọ".
4. Nigba fifi sori, o yoo gbe jade ni window ti Fi Shield oluṣeto fun foju Com ibudo.
5. Tẹ "Niwaju".

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

6. Lẹhinna tẹ "Fi sori ẹrọ", bi o ṣe han ninu nọmba.
7. Tẹ "Pari" ki o si pari fifi sori ẹrọ, bi o ṣe han ninu nọmba ni isalẹ.
8. Tẹ “Pari”ati pe o ti ṣetan lati ṣiṣẹ sọfitiwia XPOSE naa.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

3.3 XPOSE 2.0 isẹ

Akiyesi: Iṣẹ XPOSE 2.0 atẹle yii gba D8 PLUS bi iṣaajuample, D8 ati D8 PLUS ṣiṣẹ kanna ayafi fun iyatọ ti wiwo titẹ sii.

3.3.1 Buwolu wọle ni XPOSE

Tẹ aami yii lẹẹmeji

, ki o si tẹ awọn log lori

ni wiwo han ni ọtun:

Ede akọkọ ti XPOSE 2.0 jẹ atunṣe funrararẹ da lori ede eto iṣẹ ti kọnputa naa. Ti o ba fẹ yi ede pada, kan tẹ Ede ki o yan ọkan ti o nilo. Lẹhinna tẹ Bẹrẹ lati ṣiṣẹ XPOSE.
Lẹhin wiwọle, wiwo naa yoo han ni apa ọtun.

Awọn olumulo le wa awọn ẹya pataki 5: Eto Eto, Sopọ, Ifihan, Layer, Awọn oju iṣẹlẹ.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

3.3.2 Eto Eto

Tẹ

latiwole ni wiwo.

Wa Ẹrọ: Ẹya tuntun ti XPOSE 2.0 jẹ aiyipada ofo ni Wa Ẹrọ. Awọn olumulo yẹ lati yan ẹrọ ti o nilo ni Wa Ẹrọ.
Software VersionCheck ti isiyi ti ikede. Ede Yan ede nilo.
Keyboard Management: Tẹ yoo darí si window eto keyboard. Eto bọtini itẹwe jẹ apẹrẹ lati baamu fun oriṣiriṣi eto iṣẹ bii Windows ati Mac. Awọn olumulo le ṣeto awọn bọtini gige kukuru.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

Fa Input, Ijade, Layer ati Tito tẹlẹ lati atokọ si awọn bọtini ti o fẹ bi o ṣe han ninu eeya:
Jọwọ ṣe akiyesi agbegbe keyboard nibiti o ngbanilaaye lati ṣeto awọn bọtini gige kukuru.
Ti eto naa ba jẹ aṣiṣe tabi ko si iwulo fun awọn bọtini gige kukuru diẹ sii, tẹ lati ko diẹ ninu awọn bọtini kuro tabi ko gbogbo rẹ kuro. Ko o: ni lati ko diẹ ninu awọn bọtini kuro, awọn bọtini nilo lati yan ṣaaju ọwọ. Ko gbogbo rẹ kuro: ni lati yọ gbogbo awọn bọtini gige kuru ti a ti ṣeto tẹlẹ kuro. Awọn olumulo tun le fi eto keyboard pamọ bi iwe afọwọkọ.
Scrip Ṣeto
File Ona: Fipamọ awọn Eto bọtini itẹwe lọwọlọwọ ni iwe afọwọkọ si ọna agbegbe. File Orukọ: akosile file oruko. Fifuye akosile: Fifuye/Paarẹ. Tẹ Pada lati pada si .

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

Ibaraẹnisọrọ Eto Serial Port: Wa nikan awon ti sopọ nipasẹ ni tẹlentẹle ibudo. Asopọmọra Ethernet: Wa awọn ti o sopọ nipasẹ Ethernet nikan. Mejeeji Ti yan: Tẹ mejeeji, awọn asopọ mejeeji yipada ni iṣọkan. Akiyesi: D8 nikan ṣe atilẹyin Asopọ Port Serial.
Eto Ifihan: Awọn olumulo le tan-an Ipo Imugboroosi ti iboju itẹsiwaju ba wa.
Itọsọna Alakobere: Ṣayẹwo itọsọna alakobere fun iṣẹ iyara ti sọfitiwia XPOSE.
Auto Connect Turn on auto connection switch and the interface will pop up a prompt to remind the user whether to restore the previous interface.
Eto Aṣẹ

Tẹ

lati ṣii titẹsi aṣẹ.

Eto Aṣẹ ni a lo lati ṣafikun ati ṣatunkọ orukọ olumulo ati ọrọ igbaniwọle fun awọn olumulo ti a fun ni aṣẹ, bakanna pẹlu awọn igbanilaaye ti awọn olumulo le ṣiṣẹ.

Ipò Aṣẹ Ayipada si PA, jọwọ Tan-an Ipo fun isẹ.

Fun ẹrọ ṣiṣe fun igba akọkọ, tabi igbesoke ẹrọ, tabi atunto ile-iṣẹ, awọn aṣiṣe XPOSE lati wọle bi Alakoso pẹlu awọn aiyipada orukọ si Abojuto, ati

PWD aseku to admin.

ti han ni Yiyan

Awọn ẹrọ.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

Ti awọn olumulo ba ti wọle si XPOSE tẹlẹ,

ti o han ni Awọn ẹrọ ti a yan. Tẹ Orukọ ati

PWD, lẹhinna tẹ Wọle.
aseyori isẹ.

aami tọkasi

Tẹ Tuntun ni wiwo Aṣẹ lati ṣafikun ORUKO USER tuntun ati ṣeto PWD.
Lẹhinna tẹ Fipamọ lati jẹrisi.

Ṣatunkọ: Ṣatunkọ orukọ olumulo ati ọrọ igbaniwọle ti a ti kọ tẹlẹ.
Paarẹ: Pa orukọ olumulo rẹ ati ọrọ igbaniwọle ti a ti kọ tẹlẹ.
Ṣeto Aṣẹ: Awọn iṣẹ lori XPOSE 2.0 lori kọnputa yii ti awọn olumulo gba laaye lati ṣiṣẹ. Tẹ bulọki alawọ ewe lati yọ iṣẹ naa kuro lati ma gba laaye.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

3.3.3 Ijade|Igbewọle|Opinview

Tẹ

lati ṣayẹwo ru nronu ni wiwo bi han ni

ọtun olusin.

Akiyesi: 1. eleyi ti sample tọkasi input, blue sample tọkasi o wu, ofeefee sample tọkasi ibaraẹnisọrọ. 2. Interface Awọ Apejuwe: 1) Alawọ ewe: deede ifihan agbara; 2) Yellow: ifihan agbara ajeji; Funfun: ko si ifihan agbara.

Asopọmọra ẹrọ
1. Tẹ awọn ẹrọ ti o nilo ninu awọn akojọ.

2. Tẹ

nínú .

Eto Ijade

Tẹ eyikeyi ibudo o wu, igbimọ nibiti a ti yan ibudo naa. Awọn olumulo le ṣe awọn eto si ibudo ni bayi. A pupa onigun seju ni ayika awọn ti o yan ibudo nigba ti o ti tẹ.

Akiyesi: Jọwọ ṣayẹwo ni akọkọ lati rii daju pe awoṣe ti a yan ni Wa Ẹrọ, ati iru ibaraẹnisọrọ ni Eto Ibaraẹnisọrọ jẹ deede.

Ipinnu: Awọn olumulo le yan Ipinnu Standard tabi Ipinnu Aṣa.
1. Standard Resolutions le ti wa ni yàn lati 1024 × 768 @ 75 to 7680 × 1080 @ 60 bi o han ni ọtun nọmba. 2. D8 ṣe atilẹyin lati ṣe akanṣe ipinnu iṣẹjade. Tẹ ibudo iṣẹjade ati tẹ ni Iwọn, Giga ati Oṣuwọn Sọtuntun.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

DE:
Bits: 8 die-die, 10bits tabi 12 die-die iyan HDR: SDR, HDR10, iyan HLG
Eto Input
Tẹ ibudo titẹ sii, gẹgẹbi HDMI 2.1 IN, ati awọn olumulo le ṣe awọn eto si ibudo ni bayi.
A pupa onigun seju ni ayika awọn ti o yan ibudo nigba ti o ti tẹ.
Olumulo le ṣeto ati .
Eto Ohun-ini
Igbewọle Portchosen ibudo Iwọn: X/Ythe ibẹrẹ petele ati ipo inaro Iwọn/Iga: petele ati inaro iwọn ti iwọn. Irugbin: Atilẹyin cropping fun ipo, iga ati iwọn.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

EDID
Wọle Portchosen ibudo Awọn paramita Ipilẹ: Iwọn/Iga/Iru-igbohunsafẹfẹ ni awọn paramita aṣa lati pade awọn iwulo rẹ.

Pariview

Tẹ Pada Factory Eto.

, Nibẹ ni o wa Overview ati

Awọn Infousers ẹrọ le ṣayẹwo alaye Mac lọwọlọwọ.

Alaye Igbimọ akọkọ: awọn olumulo le ṣayẹwo sọfitiwia ati ẹya hardware ti CommBoard, BackBoard, MatrixBoard.

Alaye Module Input: awọn olumulo le ṣayẹwo orukọ module igbewọle lọwọlọwọ, ẹya sọfitiwia ati ẹya hardware.
Alaye Module Ijade: awọn olumulo le ṣayẹwo orukọ module ti o wu lọwọlọwọ, ẹya sọfitiwia ati ẹya hardware.
Eto Factory Yọ EDID: ko paramita EDID ti tẹlẹ kuro
Fi ami si Yọ EDID ati lẹhinna tẹ Tunto.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

3.3.4 àpapọ Management

Eto Ifihan jẹ fun awọn olumulo lati ṣeto ifilelẹ awọn abajade.

Tẹ

lati tẹ wiwo isakoso akọkọ.

D8 ti ṣeto si Agbelebu nipasẹ aiyipada, han bi eeya ni ọtun.

Ti o ba nilo awọn ipilẹ bii H 1/4, V 1/4 tabi awọn miiran,

tẹ mọlẹ

lati fagilee ẹgbẹ iboju lọwọlọwọ

ati ki o si ṣẹda titun kan eiyan.

Apoti:
Apoti nibi tumọ si Agbegbe Ifihan, fun example o le jẹ a akoso LED iboju tabi ohun orun ti LCDs.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

Àdàkọ
Awọn oriṣi 8 ti ipilẹ “Agbegbe Ifihan” wa, eyiti o lo lati ni wiwo iṣelọpọ ninu, ati pe o le gba bi ifilelẹ ti iṣelọpọ. Fa awoṣe kan lati ṣẹda apoti kan ni ọrọ miiran agbegbe ifihan.
Ipinnu
Awọn olumulo le yan ipinnu iṣẹjade bi o ṣe han ninu eeya.
Ipo
Ipo kọọkan ti samisi ni oriṣiriṣi awọ ati pese pẹlu awọn awoṣe ti o ni ibamu. Awọn olumulo le ṣe awọn iṣẹ labẹ awọn ipo oriṣiriṣi.

D8 ṣe atilẹyin Ipo Pipin. Ko si eiyan ti o wa ni ipamọ lẹhin iyipada ipinnu labẹ Ipo Pipin, iyẹn ni, o nilo lati tun eiyan kan ṣe.
Ṣe akanṣe Apoti

Tẹ

ni isalẹ ti awọn awoṣe akojọ.

Ifilelẹ Atẹle: Aifọwọyi tabi Afowoyi

Awọn igbesẹ ti ṣẹda eiyan jẹ bi atẹle: 1. Kun H Total / V Total ati Row / Column, yoo ṣe iṣiro nkan H ati ohun V laifọwọyi. Fun example, ti o ba ti o ba fẹ lati ṣẹda kan eiyan pẹlu 1 kana ati 4 ọwọn ati kọọkan àpapọ ni o ni kan iga ti 1080, iwọn ti akọkọ eiyan ni 1920, keji eiyan 1680, kẹta eiyan 1600 ati awọn kẹrin eiyan ni 2480. Apapọ iwọn yoo jẹ 7680 ati giga lapapọ yoo jẹ 1080. 2. Tẹ , eiyan yoo han ni wiwo, ati ki o fihan awọn iwọn ati ki o iga ti kọọkan Ifihan. 3. Tẹ lati fipamọ awọn eiyan.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

Atunṣe Apoti

1. Gbe: Fa awọn boarder ti awọn àpapọ agbegbe lati gbe awọn oniwe-ibi ni wiwo.

2. Iwọn: Tẹ aami

lati isunki, Tẹ lati tobi

awọn ipin ti àpapọ agbegbe lori wiwo.

3. Fagilee: Tẹ mọlẹ ẹgbẹ.

lati fagilee iboju

Ifihan
Akojọ Ijade White ti o wa Grey ọkan ti ko si Awọn Igbesẹ Isẹ osi-Asin tẹ iṣẹjade naa ki o fa si ifihan ti apoti ti a ṣeto. Rirọpo Fa ati ju silẹ abajade sinu ifihan ti o baamu. Ijade ti o rọpo yoo yipada lati grẹy si funfun ninu atokọ naa.

Ifihan System
D8 ngbanilaaye awọn olumulo lati ṣatunkọ orukọ Agbegbe Ifihan ti o ti ṣẹda nipasẹ titẹ .

3.3.5 Layer Management

Isakoso Layer jẹ apẹrẹ lati ṣakoso Layer

ti kọọkan atẹle. Tẹ wiwo aami yii:

lati wọle si

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

Agbegbe Ifihan
Nigbati o ba tẹ wiwo iṣakoso Layer, window naa jẹ ofo. Ẹgbẹ iboju ti a ṣẹda ni Eto Ifihan yoo fa lati Agbegbe Ifihan.
Ifihan agbara
Akojọ ifihan agbara, fifi gbogbo awọn ifihan agbara titẹ sii ati awọn ipinnu han lọwọlọwọ. Fa ifihan agbara si ifihan. Tẹ , awọn olumulo le fun lorukọ mii ifihan agbara titẹ sii lẹhinna
tẹ lati jẹrisi.
Layer
Nọmba LayerNọmba ti o wa ni igun pupa ti o wa ni apa ọtun n duro fun nọmba awọn ipele ti o le gbe si iṣẹjade.
Bi ifihan ti n fa sinu, nọmba Layer n dinku. Ti nọmba Layer ba ti lo soke, ifihan agbara ko le fa sinu.
Akiyesi: D8 nikan ṣe atilẹyin Layer 1*8K.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

Atunṣe Layer awọn ọna meji lo wa lati ṣatunṣe Layer. 1. Lo igi labẹ wiwo Yan Layer kan ati igi naa fihan orisun ifihan rẹ, tẹ ni ipo ati iwọn. Tẹ Fipamọ lati jẹrisi.
2. Iwọn Layer ati Irugbingbin Yan Layer kan ti o nilo lati ṣatunṣe, ki o tẹ ni ipo ati iwọn rẹ.
Alfa: 0 ~ 128 X/Ythe petele ati inaro ipo ti irugbin / asekale Iwọn / Giga: petele ati inaro iwọn ti irugbin / asekale
aami yii tumọ si data ti o ni ibatan, nigbati iwọn ba yipada, giga yoo yipada bi iwọn kanna.
aami yii tumọ si data ti ko ni ibatan, iwọn ati giga nilo lati kun ni atele.

Layer Movement Gbigbe awọn Asin lati fa awọn Layer.
Layer Yọ Tẹ agbelebu lori oke apa ọtun ti Layer lati yọ Layer kuro ti o ba nilo.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

Ṣeto Layer: lati gbin ipele naa: tii Layer lati yago fun awọn iṣẹ ti ko tọ: max lati bo atẹle naa. : bo gbogbo awọn diigi ni ẹgbẹ iboju kanna
pẹlu awọn ọkan ifihan agbara.
3.3.6 Iṣakoso tito tẹlẹ
Iṣakoso tito tẹlẹ jẹ apẹrẹ lati yi banki pada (eto iwoye ti a ṣe ni igbesẹ to kẹhin). Ipo Iṣakoso tito tẹlẹ: 1. Ipo Afowoyi 2. Ipo Iṣeto
1. Ipo Afowoyi
Ipele ti o yan yoo han ni wiwo akọkọ, ati iboju PGM wa ni akọkọ ni Iwe-ifowopamọ Bank. Ge Ge, yipada lati PVW si PGM lẹsẹkẹsẹ.

Orukọ tito tẹlẹ
Yan banki kan ki o tẹ Orukọ Tito tẹlẹ, fọwọsi òfo lẹhin Orukọ Tito Tito Tuntun lati tunrukọ Tito tẹlẹ (Banki). Tẹ awọn awọ Àkọsílẹ lẹhin Awọ Yiyan ati ki o yan titun kan awọ fun awọn boarder ti yàn ifowo.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

Hotkey Lo hotkey lati jẹ ki iṣiṣẹ ni Isakoso Tito tẹlẹ ni irọrun diẹ sii.

2. Iṣeto Ipo

Ipo yii jẹ apẹrẹ lati ṣeto ile-ifowo laifọwọyi (iwoye/tito tẹlẹ) yipada.
Awọn igbesẹ jẹ bi atẹle
1. Tan “Ipo Iṣeto” 2. Yan “Lop Time” ni Ipo Loop 3. Yan Banki 4. Fọwọsi “Igba” 5. Tẹ “O DARA”

Awọn olumulo le tẹ

lati satunkọ ati

lati parẹ. Lẹhin

Eto ti ṣe, tan “Yipada Lupu” .

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

Chapter 4 ibere Awọn koodu

4.1 ọja Code

130-0008-05-0

130-0008-03-0

D8 PLUS

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

Chapter 5 Support
5.1 Kan si wa

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

Chapter 6 Àfikún

6.1 ni pato

Awọn asopọ awoṣe
Iṣẹ ṣiṣe

Input Output Communication Power Input Resolutions
Ipinnu Ijade
Supported Standard Colorspace

D8 HDMI 2.1

2× HDMI-A

HDMI 2.0
Genlock
LAN RS232 1×IEC

4×HDMI-A 2×BNC (1×IN | 1×LOOP) 1×RJ45 1×RJ11

Idanimọ aifọwọyi

D8 PLUS HDMI 2.1 DP 1.4 HDMI 2.0
Genlock
LAN RS232 1×IEC

1×HDMI-A 1×DP 4×HDMI-A
2×BNC (1×IN | 1×LOOP)
1×RJ45 1×RJ11

HDMI 2.1 SMPTE VESA
DP 1.4 SMPTE VESA

1280×720@50/60 | 1920×1080@30/50/60 | 3840×2160@25/30 | 7680×4320@30/60 1024×768@60 | 1280×800@60 | 1280×1024@60 | 1360×768@60 | 1366×768@60 | 1440×900@60 | 1920×1200@60 2560×1440@60 | 2560×1600@60/120 | 3840×2160@30/60/120 | 4096×2160@50/59/60 | 7680×4320@30/60 | custom resolution
1280×720@50/60 | 1920×108030/50/60 | 3840×2160@25/30 | 7680×4320@30/60 1024×768@60 | 1280×800@60 | 1280×1024@60 | 1360×768@60 | 1366×768@60 | 1440×900@60 | 1920×1200@60 2560×1440@60 | 2560×1600@60/120 | 3840×2160@30/60/120 | 4096×2160@50/59/60 | 7680×4320@30/60 | custom resolution

Select standard resolution or custom resolution

HDMI 2.0 SMPTE
VESA

1280×720@50/60 | 1920×1080@30/50/60 | 3840×2160@30/60 1280×720@23.98/24/25/29.97/30/50/59.94/60 | 1920×1080@23.98/24/25/29.97/30/50/59.94/60/120 | 1920×2160@120 3840×2160@23.98/24/25/29.97/30/50/59.94/60 | 4096×2160@23.98/24/25/29.97/30/50/59.94/60 | custom resolution

HDMI

2.1

DP HDMI 2.1 Input
8K60 8K30

1.4 YUV
4:2:0 8/10/12 bit 4:2:0 8/10/12 bit | 4:2:2 8/10/12 bit |

RGB —
8/10 die-die

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

Hardware Alaye
Agbara
Ṣiṣẹ Ayika Ti ara

Awoṣe ẹrọ
Iṣagbewọle Voltage Maximum Power Heat Dissipation Temperature Humidity Device Weight Packaged Weight Device Dimension Packaged Dimension

4:4:4 8/10 bit

4K60

4:2:0 | 4:2:2 | 4:4:4 8/10/12 bit

8/10/12 die-die

4K30

4:2:0 | 4:2:2 | 4:4:4 8/10/12 bit

8/10/12 die-die

HDMI 2.0 o wu

YUV

RGB

4K60

—

8 die-die

4K30

—

8/10/12 die-die

DP 1.4 Input

YUV

RGB

8K60

4:2:0 8 bit | 4:2:2 8/10 bit | 4:4:4 8/10/12 bit

8/10/12 die-die

8K30

4:2:0 | 4:2:2 | 4:4:4 8/10/12 bit

8/10/12 die-die

4K60

4:2:0 | 4:2:2 | 4:4:4 8/10/12 bit

8/10/12 die-die

4K30

4:2:0 | 4:2:2 | 4:4:4 8/10/12 bit

8/10/12 die-die

macOS

Mac Studio, M2 Max, Sonoma 15.5, HDMI2.1 / Thunderbolt 5

Windows

AMD RADEON RX7900 XT,HDMI2.1 / DP 1.4

Windows

Nvidia RTX4060,HDMI2.1 / DP 1.4

AC 100V-240V, 50 / 60Hz

40W

2.59 MJ/day

0 ~ 45

15% ~ 85%

7.2kg

8.5kg

484mm × 378mm × 88.6mm

630mm × 585mm × 250mm

* 8K60 input resolutions and 4K60 output resolutions supported; downward compatible with other custom input/output resolutions.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

6.2 Awọn ofin & Awọn asọye
RCA: Connector used primarily in consumer AV equipment for both audio and video. The RCA connector was developed by the Radio Corporation of America. BNC: Stands for Bayonet Neill-Concelman. A cable connector used extensively in television (named for its inventors). A cylindrical bayonet connector that operates with a twist-locking motion. CVBS: CVBS or Composite video, is an analog video signal without audio. Most commonly CVBS is used for transmission of standard definition signals. In consumer applications the connector is typically RCA type, while in professional applications the connector is BNC type.
YPbPr: Ti a lo lati ṣe apejuwe aaye awọ fun ọlọjẹ-ilọsiwaju. Bibẹkọkọ mọ bi fidio paati.
VGA: Video Graphics orun. VGA jẹ ifihan agbara analog ti a lo nigbagbogbo lori awọn kọnputa iṣaaju. Ifihan agbara naa kii ṣe isọpọ ni awọn ipo 1, 2, ati 3 ati interlaced nigba lilo ni ipo
DVI: Digital Visual Interface. Boṣewa Asopọmọra fidio oni nọmba ti o jẹ idagbasoke nipasẹ DDWG (Ẹgbẹ Iṣẹ Ifihan Digital). Boṣewa asopọ yii nfunni awọn asopọ oriṣiriṣi meji: ọkan pẹlu awọn pinni 24 ti o mu awọn ifihan agbara fidio oni-nọmba nikan, ati ọkan pẹlu awọn pinni 29 ti o mu mejeeji oni-nọmba ati fidio afọwọṣe.
SDI: Tẹlentẹle Digital Interface. Fidio asọye boṣewa jẹ gbigbe lori iwọn gbigbe data 270 Mbps yii. Awọn piksẹli fidio jẹ ijuwe pẹlu ijinle 10-bit ati 4: 2: 2 titobi awọ. Awọn data itọsi wa ninu wiwo yii ati ni igbagbogbo pẹlu ohun tabi metadata miiran. Titi di awọn ikanni ohun afetigbọ mẹrindilogun ni a le tan kaakiri. A ṣeto ohun sinu awọn bulọọki ti awọn orisii sitẹrio mẹrin. Asopọmọra jẹ BNC.
HD-SDI: wiwo oni nọmba ni tẹlentẹle giga-giga (HD-SDI), ti wa ni idiwọn ni SMPTE 292M eyi n pese oṣuwọn data ipin ti 1.485 Gbit/s.
3G-SDI: idiwon ni SMPTE 424M, oriširiši kan nikan 2.970 Gbit / s ọna asopọ tẹlentẹle ti o fun laaye rirọpo meji ọna asopọ HD-SDI.
6G-SDI: Ti ṣe deede ni SMPTE ST-2081 ti a tu silẹ ni 2015, 6Gbit / s bitrate ati anfani lati ṣe atilẹyin 2160p@30.
12G-SDI: Ti ṣe deede ni SMPTE ST-2082 ti a tu silẹ ni 2015, 12Gbit / s bitrate ati anfani lati ṣe atilẹyin 2160p@60.
U-SDI: Imọ-ẹrọ fun gbigbe awọn ifihan agbara 8K iwọn-nla lori okun kan. ni wiwo ifihan agbara ti a npe ni ultra high definition ifihan agbara / data ni wiwo (U-SDI) fun gbigbe 4K ati 8K awọn ifihan agbara lilo kan nikan opitika USB. Ni wiwo ti a idiwon bi awọn SMPTE ST 2036-4.
HDMI: Interface Multimedia Itumọ Giga: Ni wiwo ti a lo fun gbigbe fidio asọye giga ti ko ni titẹ, to awọn ikanni 8 ti ohun, ati awọn ifihan agbara iṣakoso, lori okun kan.
HDMI 1.3: Ti tu silẹ ni Oṣu Karun ọjọ 22 2006, ati pe o pọ si aago TMDS ti o pọju si 340 MHz (10.2 Gbit/s). Ipinnu atilẹyin 1920 × 1080 ni 120 Hz tabi 2560 × 1440 ni 60 Hz). O ṣe afikun atilẹyin fun 10 bpc, 12 bpc, ati 16 bpc ijinle awọ (30, 36, ati 48 bit/px), ti a npe ni awọ jin.
HDMI 1.4: Released on June 5, 2009, added support for 4096×2160 at 24 Hz, 3840×2160 at 24, 25, and 30 Hz, and 1920×1080 at 120 Hz. Compared to HDMI 1.3, 3 more features added which are HDMI Ethernet Channel (HEC) , audio

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

return channel (ARC),3D Over HDMI, a new Micro HDMI Connector, an expanded set of color spaces.
HDMI 2.0: Ti tu silẹ ni Oṣu Kẹsan Ọjọ 4, Ọdun 2013 mu iwọn bandiwidi pọ si si 18.0 Gbit/s. Awọn ẹya miiran ti HDMI 2.0 pẹlu to awọn ikanni ohun afetigbọ 32, to 1536 kHz ohun ohun sample igbohunsafẹfẹ, HE-AAC ati awọn ajohunše iwe ohun DRA, imudara agbara 3D, ati awọn iṣẹ CEC afikun.
HDMI 2.0a: Ti tu silẹ ni Oṣu Kẹrin Ọjọ 8, Ọdun 2015, ati ṣafikun atilẹyin fun fidio Yiyi Yiyi to gaju (HDR) pẹlu metadata aimi.
HDMI 2.0b: Ti tu silẹ ni Oṣu Kẹta, ọdun 2016, atilẹyin fun irinna fidio HDR ati faagun ami ifihan metadata aimi lati pẹlu Hybrid Log-Gamma (HLG).
HDMI 2.1 : Ti tu silẹ ni Oṣu kọkanla 28, 2017. O ṣe afikun atilẹyin fun awọn ipinnu giga ati awọn iwọn isọdọtun ti o ga julọ, Dynamic HDR pẹlu 4K 120 Hz ati 8K 120 Hz.
DisplayPort: Ni wiwo boṣewa VESA ni akọkọ fun fidio, ṣugbọn fun ohun, USB ati data miiran. DisplayPort (orDP) jẹ sẹhin ni ibamu pẹlu HDMI, DVI ati VGA.
DP 1.1: ti fọwọsi ni Oṣu Kẹrin Ọjọ 2, Ọdun 2007, ati ẹya 1.1a ti fọwọsi ni Oṣu Kini Ọjọ 11, Ọdun 2008. DisplayPort 1.1 gba iwọn bandiwidi ti o pọ julọ ti 10.8 Gbit/s (oṣuwọn data 8.64 Gbit/s) lori ọna asopọ akọkọ 4-ọna deede, to. lati ṣe atilẹyin 1920 × 1080 @ 60Hz.
DP 1.2: ti a ṣe ni Oṣu Kini Ọjọ 7 Oṣu Kini Ọdun 2010, bandiwidi ti o munadoko si 17.28 Gbit/s atilẹyin awọn ipinnu ti o pọ si, awọn oṣuwọn isọdọtun ti o ga julọ, ati ijinle awọ ti o ga julọ, ipinnu ti o pọju 3840 × 2160@60Hz
DP 1.4: ṣe atẹjade lori 1 Oṣu Kẹta, 2016.overall gbigbe bandwidth 32.4 Gbit/s,DisplayPort 1.4 ṣe afikun atilẹyin fun Ifihan ṣiṣan ṣiṣanwọle 1.2 (DSC), DSC jẹ ilana fifi koodu “aini oju-ara” pẹlu to iwọn 3: 1 funmorawon. Lilo DSC pẹlu awọn oṣuwọn gbigbe HBR3, DisplayPort 1.4 le ṣe atilẹyin 8K UHD (7680 × 4320) ni 60 Hz tabi 4K UHD (3840 × 2160) ni 120 Hz pẹlu 30 bit/px RGB awọ ati HDR. 4K ni 60 Hz 30 bit/px RGB/HDR le ṣe aṣeyọri laisi iwulo fun DSC.
Okun-ọpọlọpọ: Awọn okun ti o ṣe atilẹyin fun ọpọlọpọ awọn ipa-ọna itankale tabi awọn ọna gbigbe ni a pe ni awọn okun ipo-pupọ, ni gbogbogbo ni iwọn ila opin ti o gbooro ati pe a lo fun awọn ọna asopọ ibaraẹnisọrọ ijinna kukuru ati fun awọn ohun elo nibiti agbara giga gbọdọ wa ni gbigbe.
Okun-ipo-ọkan: Fiber ti o ṣe atilẹyin ipo ẹyọkan ni a npe ni awọn okun-ipo kan. Awọn okun ipo ẹyọkan ni a lo fun ọpọlọpọ awọn ọna asopọ ibaraẹnisọrọ to gun ju awọn mita 1,000 (3,300 ft).
SFP: kekere fọọmu-ifosiwewe pluggable, ni a iwapọ, gbona-pluggable nẹtiwọki ni wiwo module lo fun awọn mejeeji telikomunikasonu ati data awọn ibaraẹnisọrọ ohun elo.
Asopọ Okun Opitika: fopin si opin ti okun opitika, o si mu ki asopọ iyara ṣiṣẹ ati ge asopọ ju splicing. Awọn asopo ẹrọ ṣe tọkọtaya ati ṣe deede awọn ohun kohun ti awọn okun ki ina le kọja. Awọn oriṣi 4 ti o wọpọ julọ ti awọn asopọ okun opiti jẹ SC, FC, LC, ST.
SC: (Asopọ Alabapin), ti a tun mọ si asopo onigun mẹrin tun ṣẹda nipasẹ ile-iṣẹ Japanese Nippon Teligirafu ati Tẹlifoonu. SC jẹ iru isọpọ titari-fa ati pe o ni iwọn ila opin 2.5mm kan. Ni ode oni, o lo pupọ julọ ni awọn okun patch fiber optic mode nikan, afọwọṣe, GBIC, ati CATV. SC jẹ ọkan ninu awọn aṣayan olokiki julọ, nitori ayedero rẹ ni apẹrẹ wa pẹlu agbara nla ati awọn idiyele ifarada.
LC(Lucent Connector) is a small factor connector (uses only a 1.25mm ferrule diameter) that has a snap coupling

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

siseto. Nitori awọn iwọn kekere rẹ, o jẹ pipe pipe fun awọn asopọ iwuwo giga, XFP, SFP, ati SFP + transceivers.
FC :(Ferrule Connector) is a screw type connector with a 2.5mm ferrule. FC is a round shaped threaded fiber optic connector,mostly used on Datacom, telecom, measurement equipment, single-mode laser. ST: (Straight Tip) was invented by AT&T and uses a bayonet mount along with a long spring-loaded ferrule to support the fiber.
USB: Gbogbo Serial Bus ni a boṣewa ti a ti ni idagbasoke ni aarin-1990s ti o asọye kebulu, asopo ati ibaraẹnisọrọ Ilana. Imọ-ẹrọ yii jẹ apẹrẹ lati gba asopọ laaye, ibaraẹnisọrọ ati ipese agbara fun awọn ẹrọ agbeegbe ati awọn kọnputa.
USB 1.1: USBBandwidth ni kikun, sipesifikesonu jẹ itusilẹ akọkọ lati gba jakejado nipasẹ ọja alabara. Sipesifikesonu yii gba laaye fun iwọn bandiwidi ti o pọju ti 12Mbps.
USB 2.0: tabi HiSpeed USB, sipesifikesonu ṣe ọpọlọpọ awọn ilọsiwaju lori USB 1.1. Ilọsiwaju akọkọ jẹ ilosoke ninu bandiwidi si iwọn 480Mbps ti o pọju.
USB 3.2: Super Speed USB pẹlu awọn oriṣi 3 ti 3.2 Gen 1 (orukọ atilẹba USB 3.0), 3.2Gen 2 (orukọ atilẹba USB 3.1), 3.2 Gen 2 × 2 (orukọ atilẹba USB 3.2) pẹlu iyara to 5Gbps, 10Gbps, 20Gbps lẹsẹsẹ.
Ẹya USB ati eeya awọn asopọ:

USB 2.0

Iru A Iru B Mini A Mini B Micro-A Micro-B Iru C

USB 3.0

USB 3.1 & 3.2

NTSC: Iwọn fidio fidio awọ ti a lo ni Ariwa America ati diẹ ninu awọn ẹya miiran ti agbaye ti a ṣẹda nipasẹ Igbimọ Awọn ajohunše Tẹlifisiọnu ti Orilẹ-ede ni awọn ọdun 1950. NTSC nlo awọn ifihan agbara fidio interlaced.
PAL: Alakoso Alternate Line. Apewọn tẹlifisiọnu kan ninu eyiti ipele ti ti ngbe awọ ti yipada lati laini si laini. Yoo gba awọn aworan ni kikun mẹrin (awọn aaye 8) fun awọn awọ-si-horizontalimages (awọn aaye 8) fun ibatan ala-si-petele lati pada si aaye itọkasi. Yiyi miiran ṣe iranlọwọ fagilee awọn aṣiṣe alakoso. Fun idi eyi, iṣakoso hue ko nilo lori eto PAL TV kan. PAL, ni lilo pupọ ni iwulo lori eto PAL TV kan. PAL, jẹ lilo pupọ ni Iwọ-oorun Yuroopu, Australia, Afirika, Aarin Ila-oorun, ati Micronesia. PAL nlo 625-ila, 50-oko (25 fps) apapo awọ gbigbe eto.
SMPTEAwujọ ti Aworan išipopada ati Awọn Onimọ-ẹrọ Telifisonu. Ajo agbaye kan, ti o da ni Amẹrika, ti o ṣeto awọn iṣedede fun awọn ibaraẹnisọrọ wiwo baseband. Eyi pẹlu fiimu bii fidio ati awọn iṣedede tẹlifisiọnu.
VESA: Video Electronics Standards Association. Ajo sise kọmputa eya nipasẹ awọn ajohunše.
HDCP: Idaabobo akoonu oni-nọmba bandiwidi giga (HDCP) jẹ idagbasoke nipasẹ Intel Corporation o wa ni lilo jakejado fun aabo fidio lakoko gbigbe laarin awọn ẹrọ.
HDBaseT: Apewọn fidio kan fun gbigbe fidio ti ko ni titẹ (awọn ifihan agbara HDMI) ati awọn ẹya ti o jọmọ nipa lilo awọn amayederun cabling Cat 5e/Cat6.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

ST2110: A SMPTE boṣewa idagbasoke, ST2110 ṣe apejuwe bi o ṣe le firanṣẹ fidio oni-nọmba lori ati awọn nẹtiwọọki IP. Fidio ti wa ni gbigbe laiṣipọ pẹlu ohun ati data miiran ni awọn ṣiṣan lọtọ.
SMPTE2110 jẹ ipinnu ni akọkọ fun iṣelọpọ igbohunsafefe ati awọn ohun elo pinpin nibiti didara ati irọrun ṣe pataki diẹ sii.
SDVoE: Fidio asọye sọfitiwia lori Ethernet (SDVoE) jẹ ọna fun gbigbe, pinpin ati iṣakoso awọn ifihan agbara AV nipa lilo amayederun TCP/IP Ethernet fun gbigbe pẹlu lairi kekere. SDVoE jẹ lilo igbagbogbo ni awọn ohun elo isọpọ. Dante AV: Ilana Dante ti ni idagbasoke fun ati gba ni ibigbogbo ni awọn eto ohun fun gbigbe ohun afetigbọ oni-nọmba ti ko ni titẹ lori awọn nẹtiwọọki orisun IP. Sipesifikesonu Dante AV aipẹ diẹ sii pẹlu atilẹyin fun fidio oni-nọmba.
NDI: Ẹrọ Nẹtiwọọki Nẹtiwọọki (NDI) jẹ boṣewa sọfitiwia ti o dagbasoke nipasẹ NewTek lati jẹ ki awọn ọja ibaramu fidio lati ṣe ibaraẹnisọrọ, firanṣẹ, ati gba fidio didara igbohunsafefe ni didara giga, ọna airi kekere ti o jẹ fireemu-deede ati pe o dara fun yi pada ni a ifiwe gbóògì ayika lori TCP (UDP) àjọlò orisun nẹtiwọki. NDI jẹ igbagbogbo ri ni awọn ohun elo igbohunsafefe.
RTMP: Ilana Ifiranṣẹ Akoko-gidi (RTMP) jẹ akọkọ ilana ilana ohun-ini ni idagbasoke nipasẹ Macromedia (bayi Adobe) fun sisanwọle ohun, fidio ati data lori Intanẹẹti, laarin ẹrọ orin Flash ati olupin kan.
RTSP : Ilana Itọka Gidi Gidigidi (RTSP) jẹ ilana iṣakoso nẹtiwọki ti a ṣe apẹrẹ fun lilo ninu ere idaraya ati awọn eto ibaraẹnisọrọ lati ṣakoso awọn olupin media sisanwọle. Ilana naa jẹ lilo fun idasile ati iṣakoso awọn akoko media laarin awọn aaye ipari.
MPEG: Ẹgbẹ Awọn amoye Aworan Gbigbe jẹ ẹgbẹ iṣiṣẹ ti a ṣẹda lati ISO ati IEC awọn iṣedede idagbasoke ti o gba ohun / fidio oni-nọmba funmorawon ati Gbigbe.
H.264: Tun mo bi AVC (To ti ni ilọsiwaju Video ifaminsi) tabi MPEG-4i ni a wọpọ fidio funmorawon bošewa. H.264 ti a idiwon nipasẹ awọn ITU-T Video ifaminsi Ẹgbẹ Amoye Group (VCEG) paapọ pẹlu ISO/IEC JTC1 Gbigbe Aworan Amoye Group (MPEG). H.265: Tun mọ bi HEVC (High Efficiency Video Ifaminsi )H.265 ni arọpo si awọn opolopo lo H.264/AVC oni fidio ifaminsi bošewa. Idagbasoke labẹ awọn atilẹyin ti ITU, awọn ipinnu soke si 8192×4320 le wa ni fisinuirindigbindigbin.
API: Ibaraẹnisọrọ siseto Ohun elo kan (API) n pese iṣẹ ti a ti yan tẹlẹ eyiti ngbanilaaye awọn agbara iraye si ati awọn ẹya ara ẹrọ orroutines nipasẹ sọfitiwia tabi ohun elo, laisi wiwọle koodu orisun tabi agbọye awọn alaye ti ẹrọ iṣẹ inu. Ipe API le ṣe iṣẹ kan ati/tabi pese esi data/iroyin.
DMX512: Iwọn ibaraẹnisọrọ ti o ni idagbasoke nipasẹ USITT fun ere idaraya ati awọn ọna ina oni-nọmba.Iwọn igbasilẹ ti Ilana Digital Multiplex (DMX) ti ri ilana ti a lo fun awọn ẹrọ miiran ti o pọju pẹlu awọn oluṣakoso fidio. DMX512 ti wa ni jiṣẹ lori okun ti 2 alayidayida orisii pẹlu 5pin XLR kebulu fun asopọ.
ArtNet: Ilana ethernet kan ti o da lori akopọ TCP/IP, ti a lo ni akọkọ ninu awọn ohun elo ere idaraya/awọn iṣẹlẹ. Ti a ṣe lori ọna kika data DMX512, ArtNet ngbanilaaye ọpọlọpọ “awọn agbaye” ti DMX512 lati tan kaakiri nipa lilo awọn nẹtiwọọki ethernet fun gbigbe.
MIDI: MIDI ni kukuru ti Musical Instrument Digital Interface. Gẹgẹbi orukọ naa ṣe tọka si ilana naa ni idagbasoke fun ibaraẹnisọrọ laarin awọn ohun elo orin itanna ati awọn kọnputa ti o kẹhin. Awọn ilana MIDI jẹ awọn okunfa tabi awọn aṣẹ ti a firanṣẹ lori awọn kebulu alayipo, ni deede lilo awọn asopọ DIN 5pin.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

OSC: Ilana ti Ṣiṣii Ohun Iṣakoso (OSC) Ilana jẹ fun Nẹtiwọki ohun synthesizers, awọn kọmputa, ati multimedia awọn ẹrọ fun orin išẹ tabi show Iṣakoso. Gẹgẹbi XML ati JSON, Ilana OSC ngbanilaaye pinpin data. OSC ti gbe nipasẹ awọn apo-iwe UDP laarin awọn ẹrọ ti a ti sopọ lori Ethernet.
Imọlẹ Nigbagbogbo n tọka si iye tabi kikankikan ti ina fidio ti a ṣejade lori iboju laisi iyi si awọ. Nigba miiran a npe ni ipele dudu.

Contrast Ratio The ratio of the high light output level divided by the low light output level. In theory, the contrast ratio of the television system should be at least 100:1, if not 300:1. In reality, there are several limitations. Well-controlled viewAwọn ipo ing yẹ ki o mu ipin itansan to wulo ti 30:1 si 50:1.
Iwọn Awọ: Didara awọ, ti a fihan ni awọn iwọn Kelvin (K), ti orisun ina. Iwọn otutu awọ ti o ga julọ, ina buluu naa. Iwọn otutu ti o dinku, ina naa yoo pọ si. Iwọn otutu awọ ala fun ile-iṣẹ A/V pẹlu 5000°K, 6500°K, ati 9000°K.
Ekunrere: Chroma, Chroma ere. Kikan awọ naa, tabi iwọn ti awọ ti a fun ni eyikeyi aworan jẹ ofe lati funfun. Ti o kere si funfun ni awọ kan, awọ jẹ otitọ tabi ti o tobi ju itẹlọrun rẹ lọ. Saturation jẹ iye pigmenti ni awọ kan, kii ṣe kikankikan.

Gamma:Ijade ina ti CRT kii ṣe laini ni ọwọ si voltage igbewọle. Iyatọ laarin ohun ti o yẹ ki o ni ati ohun ti o jade ni otitọ ni a mọ bi gamma.
Fireemu: Ninu fidio interlaced, fireemu kan jẹ aworan pipe kan. Férémù fidio kan jẹ awọn aaye meji, tabi awọn eto meji ti awọn ila interlaced. Ninu fiimu kan, fireemu kan jẹ ọkan ṣi aworan ti jara ti o ṣe aworan išipopada kan.
Genlock: Faye gba mimuuṣiṣẹpọ ti bibẹẹkọ awọn ẹrọ fidio. Olupilẹṣẹ ifihan agbara n pese awọn itọka ifihan eyiti awọn ẹrọ ti o sopọ le ṣe itọkasi. Tun wo Black Burst ati Awọ Burst.
Blackburst: Fọọmu igbi fidio laisi awọn eroja fidio.O pẹlu amuṣiṣẹpọ inaro, amuṣiṣẹpọ petele, ati alaye Chroma ti nwaye. Blackburst ni a lo lati mu awọn ohun elo fidio ṣiṣẹpọ lati mu iṣelọpọ fidio pọ.
Awọ Burst: Ni awọn eto TV awọ, nwaye ti igbohunsafẹfẹ subcarrier ti o wa ni apa ẹhin ti ifihan fidio apapo. Eyi n ṣiṣẹ bi ifihan mimuuṣiṣẹpọ awọ lati fi idi igbohunsafẹfẹ ati itọkasi alakoso fun ifihan agbara Chroma. Ti nwaye awọ jẹ 3.58 MHz fun NTSC ati 4.43 MHz fun PAL.
Awọ BarsA apẹẹrẹ idanwo boṣewa ti ọpọlọpọ awọn awọ ipilẹ (funfun, ofeefee, cyan, alawọ ewe, magenta, pupa, bulu, ati dudu) gẹgẹbi itọkasi fun titopọ eto ati idanwo. Ninu fidio NTSC, awọn ọpa awọ ti o wọpọ julọ ti a lo ni SMPTE awọn ọpa awọ boṣewa. Ninu fidio PAL, awọn ọpa awọ ti a lo julọ julọ jẹ awọn ọpa aaye mẹjọ ni kikun. Lori awọn diigi kọnputa awọn ọpa awọ ti a lo julọ julọ jẹ awọn ori ila meji ti awọn ọpa awọ ti o yipada.
Yipada Ailokun: Ẹya ti a rii lori ọpọlọpọ awọn oluyipada fidio. Ẹya yii jẹ ki switcher duro titi aarin inaro lati yipada. Eleyi yago fun a glitch (ibùgbé scrambling) eyi ti igba ti wa ni ri nigbati yi pada laarin awọn orisun.
Wiwọn: Iyipada fidio tabi ifihan agbara ayaworan kọnputa lati ipinnu ibẹrẹ si ipinnu tuntun. Fifẹ lati ipinnu kan si omiran ni a ṣe deede lati mu ifihan agbara pọ si fun titẹ sii si ero isise aworan, ọna gbigbe tabi lati mu didara rẹ dara nigbati o ba gbekalẹ lori ifihan kan pato.

PIP: Picture-In-Picture. A small image within a larger image created by scaling down one of image to make it smaller. Other forms of PIP displays include Picture-By-Picture (PBP) and Picture- With-Picture (PWP), which are commonly used

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

with 16:9 aspect display devices. PBP and PWP image formats require a separate scaler for each video window.
HDR: jẹ ilana iwọn giga ti o ni agbara (HDR) ti a lo ninu aworan ati fọtoyiya lati ṣe ẹda iwọn ina ti o tobi ju ti ohun ti o ṣee ṣe pẹlu aworan oni nọmba boṣewa tabi awọn ilana fọto. Ero ni lati ṣafihan iru iwọn itanna ti o jọra si eyiti o ni iriri nipasẹ eto iwo eniyan.
UHD: Ti o duro fun Itumọ giga Ultra ati ti o ni 4K ati awọn iṣedede tẹlifisiọnu 8K pẹlu ipin 16: 9, UHD tẹle boṣewa 2K HDTV. Ifihan UHD 4K kan ni ipinnu aphysical ti 3840 × 2160 eyiti o jẹ igba mẹrin agbegbe ati lẹmeji mejeeji widthandheightofaHDTV/FullHD (1920 x1080) ifihan fidio.
EDID: Alaye idanimọ ti o gbooro sii. EDID jẹ ọna data ti a lo lati baraẹnisọrọ alaye ifihan fidio, pẹlu ipinnu abinibi ati awọn ibeere oṣuwọn isọdọtun aarin inaro, si ẹrọ orisun kan. Ẹrọ orisun yoo lẹhinna gbejade data EDID ti a pese, ni idaniloju didara aworan fidio to dara.

6.3 Àtúnyẹwò History
Tabili ti o wa ni isalẹ ṣe atokọ awọn ayipada si Afọwọṣe Olumulo Oluṣeto Fidio.

Ọna kika V1.0 V1.1
V1.2

Time 2022-05-19 2023-10-10
2024-01-22

V1.3 2024-08-13 V1.4 2025-06-24

ECO# 0000# 0001# 0002#
0003 # 0004 #

Apejuwe
First Release Update touch screen operation 1. Add D8 PLUS model 2. Add INPUT option in Main Menu The Ethernet port and Genlock port are now fully developed. Add Section 6.1 Specification

Olori Aster Aster Aster
Aster Alyssa

Gbogbo alaye ti o wa ninu rẹ jẹ Xiamen RGBlink Science & Technology Co Ltd. ayafi akiyesi.
jẹ aami-išowo ti a forukọsilẹ ti Xiamen RGBlink Science & Technology Co Ltd. Lakoko ti gbogbo awọn igbiyanju ṣe fun deede ni akoko titẹ, a ni ẹtọ lati paarọ bibẹẹkọ ṣe iyipada laisi akiyesi.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

Awọn iwe aṣẹ / Awọn orisun

RGBlink RGB-RD-UM-D8 E003 Presentation Scaler and Switcher LED Video Processor [pdf] Afowoyi olumulo
RGB-RD-UM-D8 E003 Presentation Scaler and Switcher LED Video Processor, RGB-RD-UM-D8 E003, Presentation Scaler and Switcher LED Video Processor, Switcher LED Video Processor, LED Video Processor, Video Processor

Awọn itọkasi

Itọsọna olumulo

RGBlink RGB-RD-UM-D8 E003 Igbejade Scaler ati Switcher LED Fidio Ilana olumulo

RGB-RD-UM-D8 E003 Igbejade Scaler ati Switcher LED fidio isise

ọja Alaye

Awọn pato

Awọn ilana Lilo ọja

Awọn oniṣẹ Aabo Lakotan

FAQ

Q: Kini MO le ṣe ti ọja ko ba ni agbara lori?

Q: Ṣe Mo le ṣiṣẹ ẹrọ naa laisi ideri ti a fi sii?

Awọn iwe aṣẹ / Awọn orisun

Awọn itọkasi

Fi ọrọìwòye

Fagilee esi