Iforukọsilẹ-LOGO

REGIN IO-16DI Module Pẹlu Awọn igbewọle oni-nọmba 16

REGIN-IO-16DI-Module-With-16-Digital-Inputs-PRODUCT

Awọn pato

  • Ipese voltage 24 V AC ±15 %, 50 Hz
  • Power consumption Max. 3.5 VA
  • Communication EXOline, CAN bus
  • Iyara ibaraẹnisọrọ
  • EXOline CAN-bus
    • 9600 bps
    • 20000 bps
  • Operating temperature 0…50°C
  • Storage temperature -20…+70°C
  • Ambient humidity (operation) Max. 90 % RH
  • Idaabobo kilasi IP20
  • Mounting DIN-rail or in a standard casing
  • Dimensions 148 x 123 x 60 mm (WxHxD) incl. terminals
  • DIN-rail module width 148 x 123 x 60 mm (WxHxD) incl. terminals

Awọn igbewọle

  • Awọn igbewọle oni-nọmba (DI) Potential-free closing contact between +C and DI, 24 V DC, can be configured as a pulse input.

Awọn ilana Lilo ọja

Iṣẹ ṣiṣe:
The IO-16DI module is designed to expand Regin’s programmable controllers, such as EXOflex, EXOcompact, and EXOdo,s by providing 16  additional digital inputs per controller. Communication with the controllers occurs through either EXOline or CAN-Bus, with the protocol selection set using DIP switches.

Awọn igbewọle:
The IO-16DI module features 16 digital inputs with pulse counting capability. Each input is equipped with LEDs for easy indication.

Asopọmọra:
Wiring the IO-16DI module involves connecting the terminals based on the provided descriptions. Ensure proper connections to enable the input signals to be received accurately by the module.

Fifi sori:
The IO-16DI module is designed for easy installation in a standard casing. Follow the mounting guidelines for DIN-rail modules to securely place the module in the desired location.

Iṣeto:
Before using the IO-16DI module, configure the communication protocol (EXOline or CAN-Bus) via the DIP switches according to your system requirements.

IO module fun faagun awọn olutona eto Regin EXOflex, EXOcompact ati EXOdos.

  • Rọrun onirin
  • Easy to install in a standard casing

Išẹ

  • IO-16DI enables easy expansion of a system by 16 additional inputs per controller.
  • Communication takes place via EXOline or CAN-Bus. Which protocol should be used is set via DIP switches.

Awọn igbewọle
IO-16DI has 16 digital inputs with pulse counting. The input is indicated via LEDs.

REGIN-IO-16DI-Module-With-16-Digital-Inputs-FIG- (1)Ọja yii gbe aami CE. Alaye diẹ sii wa ni www.regincontrols.com.

Asopọmọra

REGIN-IO-16DI-Module-With-16-Digital-Inputs-FIG- (2)REGIN-IO-16DI-Module-With-16-Digital-Inputs-FIG- (3)

Awọn iwọn

REGIN-IO-16DI-Module-With-16-Digital-Inputs-FIG- (4)

Awọn iwe aṣẹ
Gbogbo iwe le ti wa ni gbaa lati www.regincontrols.com.

ORI OFFICE SWEDEN

FAQs

Q: Bawo ni MO ṣe mọ iru ilana ibaraẹnisọrọ lati lo?
A: The communication protocol (EXOline or CAN-Bus) should be selected based on the compatibility with your existing system and the communication requirements of your application. Refer to the system specifications or consult with a technical expert for guidance on protocol selection.

Awọn iwe aṣẹ / Awọn orisun

REGIN IO-16DI Module Pẹlu Awọn igbewọle oni-nọmba 16 [pdf] Afọwọkọ eni
EXOflex, EXOcompact, EXOdos, Modulu IO-16DI Pẹlu 16 Digital Inputs, IO-16DI, Module Pẹlu 16 Digital Inputs, 16 Digital Inputs, Digital Inputs

Awọn itọkasi

Fi ọrọìwòye

Adirẹsi imeeli rẹ kii yoo ṣe atẹjade. Awọn aaye ti a beere ti wa ni samisi *