K PERFORMANCE SM3 plus Module
ọja Alaye
SM3 + Module R1.5 jẹ Circuit ti o da lori MegaSquirt 3 ati pinout ti awọn modulu KdFi1.4. O ti ṣe apẹrẹ lati jẹ ibaramu sẹhin pẹlu awọn olumulo MS2 KdFi1.4 ati awọn igbimọ. Awọn module jẹ 100% AEC-Q100 ifaramọ ati ki o kan išẹ Wideband Lambda Adarí pẹlu kan Bosch LSU 4.9 sensọ.
Package pẹlu awọn nkan wọnyi:
- SM3+ Module ati/tabi afikun PCB
- USB plug
- Itọsọna olumulo
- Asopọmọra Molex, awọn ifibọ & akọsori tita
Awọn ilana Lilo ọja
Ibudo USB
Ibudo USB ti SM3 + Module ti ni ipese pẹlu aabo 8kV ESD fun VBUS ati awọn laini data. Chirún USB jẹ agbara USB, eyiti o jẹ irọrun ihuwasi ibẹrẹ. Eyikeyi okun USB boṣewa le ṣee lo bi okun asopọ, ni pataki pẹlu ipilẹ FERRIT lati yago fun awọn spikes ESD.
Itanna Awọn isopọ
Gbogbo awọn asopọ itanna gbọdọ wa ni iṣaaju nipasẹ fiusi ti o da lori apakan okun. Awọn iru okun ti a ṣe iṣeduro yẹ ki o lo.
Awọn fiusi
A ṣe iṣeduro fiusi 3A fun aabo Module SM3+. Igbimọ naa tun ni fuse 5A PTCC adaṣe adaṣe ti yoo tunto funrararẹ lẹhin itutu agbaiye tabi yanju ọran kan tabi Circuit kukuru.
Eewọ LED Awọn iṣẹ
Module SM3 + ni ọpọlọpọ awọn LED inu ọkọ pẹlu awọn iṣẹ oriṣiriṣi. Eyi ni awọn alaye:
| LED Aami | Àwọ̀ | Išẹ |
|---|---|---|
| LD2 | ỌSAN | 5V ipese agbara |
| LD3 | ỌSAN | O2 adarí imurasilẹ si pawalara / agbara ri to |
| LD4 | ỌSAN | O2 alapapo adarí 2Hz / wiwọn si pawalara 1Hz |
| LD5 | ỌSAN | USB Data awọn apo-iwe |
| LD6 | ỌSAN | pulse iginisonu A |
| LDA | ỌSAN | pulse iginisonu B |
| LDB | ỌSAN | pulse iginisonu C |
| LDC | ỌSAN | pulse iginisonu D |
| LDD | ỌSAN | pulse iginisonu E |
| LDE | ỌSAN | pulse iginisonu F |
Eewọ O2 Adarí LED Awọn iṣẹ
Oludari O2 inu ọkọ tun ni awọn iṣẹ LED. Eyi ni awọn alaye:
| Ipo LED | Išẹ |
|---|---|
| Si pawalara Yara | Alapapo ipo sensọ |
| Ri to seju | Ipo wiwọn isẹ |
| Si pawalara O lọra | Imurasilẹ ati/tabi ipo aṣiṣe |
Pinouts KdFi
Module SM3+ ni ọpọlọpọ awọn pinouts fun KdFi. Eyi ni awọn alaye:
| KdFi Pin Label | Ninu-/jade | Išẹ |
|---|---|---|
| A1 | Iṣawọle | Silinda ti njade ina 1 |
| B1 | Iṣawọle | Silinda ti njade ina 2 |
| C1 | Iṣawọle | Silinda ti njade ina 3 |
| D1 | Iṣawọle | Silinda ti njade ina 4 |
| E1 | Iṣawọle | Silinda ti njade ina 5 |
| F1 | Iṣawọle | Silinda ti njade ina 6 |
| INJ1 – INJ6 | Abajade | Abẹrẹ àtọwọdá 1-6 |
| 12v | Iṣawọle | Iṣagbewọle Voltage 8-16V |
| GND | Iṣawọle | Iṣagbewọle Voltage GND |
| FP | Abajade | Idana fifa Relay |
| FDLC | Abajade | Laišišẹ adarí 3-pin – ni pipade |
| FDLO | Abajade | Laišišẹ adarí 3-pin – ŠI |
| RPM1 | Iṣawọle | Ṣiṣe titẹ sii GND |
| RPM2 | Iṣawọle | Iṣagbewọle VR Nfa igbewọle |
| IAC1 – IAC2 | Abajade | Ijade gbogbogbo 1 ati 2 (max 2A) |
| AIYE | Iṣawọle | Afẹfẹ otutu otutu |
| CLT | Iṣawọle | Titẹwọle sensọ otutu otutu |
| TPS | Iṣawọle | Fifun Ipo ifihan agbara |
| OXY – OXY_2 | Iṣawọle | Bank ifihan sensọ Lambda 1 ati banki 2 |
SM3 + Module R1.5 User Afowoyi Kperformance
SM3+ Afowoyi olumulo
Software, awakọ ati alaye tuntun le ṣe igbasilẹ ni www.Kperformance.be
Ọrọ Iṣaaju
Oriire fun rira SM3+ naa. Circuit naa da lori MegaSquirt 3 ati pinout ti awọn modulu KdFi1.4. Ṣiṣe SM3 sẹhin ni ibamu pẹlu MS2 KdFi1.4 awọn olumulo ati awọn igbimọ. O jẹ atunṣe ati kọ 100% AEC-Q100 ni ibamu. Oluṣakoso Lambda Wideband KPerformance tun jẹ apakan ti igbimọ SM3. Bosch LSU 4.9 sensọ le sopọ taara laisi oludari afikun.
To wa ninu Ifijiṣẹ
- SM3+ Module ati/tabi afikun PCB
- okun USB*
- Itọsọna olumulo
- Asopọmọra Molex, awọn ifibọ & akọsori tita
Software
Sọfitiwia yiyi ti a ṣe iṣeduro TUNERSTUDIO ati/tabi Megalog viewer
Awakọ USB
Chip FTDI inu ọkọ ṣe afiwe asopọ RS232 ni tẹlentẹle:
TunerStudio – Awọn ibaraẹnisọrọ – Eto: USB ati Alailowaya (nikan ni ẹya ti a forukọsilẹ), Aifọwọyi, 115200 Baud
Ibudo USB
Ibudo USB ti SM3 ni ipese pẹlu 8kV ESD Idaabobo ti VBUS ati Data laini. Chirún data ati aabo ESD jẹ “agbara USB”. Eyi jẹ irọrun ihuwasi ibẹrẹ ni pataki nigbati o tun bẹrẹ ina, PC kii yoo ṣe igbasilẹ awakọ USB ni igba kọọkan. Chirún USB ni ibamu si isalẹ, o le ṣee lo mejeeji pẹlu USB 3.0, 2.0 ati 1. Okun USB boṣewa kọọkan le ṣee lo bi okun asopọ, ṣugbọn o fẹẹrẹfẹ pẹlu mojuto FERRIT siwaju yago fun awọn spikes ESD.
Itanna awọn isopọ
Bi gbogbo awọn miiran voltage awọn ẹya ti a pese – gbọdọ ṣaju fiusi kan ni iṣẹ ti apakan okun.
Niyanju USB orisi:
- Ina: min 1.5 mm²
- Abẹrẹ: min 1.5 mm²
- Sensọ VR: min 0.5 mm²
- Awọn sensọ Idabobo: min 0.35 mm²
- Awọn miiran: min 0.35 mm²
Awọn fiusi
Ṣeduro lilo fiusi 3A fun idabobo SM3. Aládàáṣiṣẹ 5A PTCC fiusi ti wa ni ese lori awọn ọkọ. Yoo tunto funrararẹ lẹhin itutu agbaiye / yanju ọrọ tabi Circuit kukuru.
Eewọ LED awọn iṣẹ
| LED
Aami |
Àwọ̀ | Išẹ |
| LD2 | ỌSAN | 5V ipese agbara |
| LD3 | ỌSAN | O2 adarí imurasilẹ si pawalara / agbara ri to |
| LD4 | ỌSAN | O2 alapapo alapapo 2Hz / wiwọn si pawalara 1hz |
| LD5 | ỌSAN | USB Data awọn apo-iwe |
| LD6 | ỌSAN | USB Data awọn apo-iwe |
| LDA | ỌSAN | pulse iginisonu A |
| LDB | ỌSAN | pulse iginisonu B |
| LDC | ỌSAN | pulse iginisonu C |
| LDD | ỌSAN | pulse iginisonu D |
| LDE | ỌSAN | pulse iginisonu E |
| LDF | ỌSAN | pulse iginisonu F |
Eewọ O2 oludari LED awọn iṣẹ
| LED | Ipo | Išẹ |
| STS | Si pawalara Yara | Alapapo ipo sensọ |
| PWR | ri to | |
| STS | Si pawalara O lọra | Ipo wiwọn isẹ |
| PWR | ri to | |
| STS | Seju | Imurasilẹ ati/tabi ipo aṣiṣe |
| PWR | Seju |
Pinouts
| KdFi Pin Label Ni- / o wu Išė | ||
| A1 | Ijade IGN | Silinda ti njade ina 1 |
| B1 | Ijade IGN | Silinda ti njade ina 2 |
| C1 | Ijade IGN | Silinda ti njade ina 3 |
| D1 | Ijade IGN | Silinda ti njade ina 4 |
| E1 | Ijade IGN | Silinda ti njade ina 5 |
| F1 | Ijade IGN | Silinda ti njade ina 6 |
| INJ1 | Ijade INJ | Àtọwọdá abẹrẹ 1 |
| INJ2 | Ijade INJ | Àtọwọdá abẹrẹ 2 |
| INJ3 | Ijade INJ | Àtọwọdá abẹrẹ 3 |
| INJ4 | Ijade INJ | Àtọwọdá abẹrẹ 4 |
| INJ5 | Ijade INJ | Àtọwọdá abẹrẹ 5 |
| INJ6 | Ijade INJ | Àtọwọdá abẹrẹ 6 |
| 12v | Iṣagbewọle agbara | Iṣagbewọle Voltage 8-16V |
| GND | Agbara Input | Iṣagbewọle Voltage GND |
| FP | Epo epo | Idana fifa Relay |
| FDLC | FIdle àtọwọdá o wu | Laišišẹ adarí 3-pin
-PIPADE |
| FDLO | FIdle àtọwọdá o wu | Laišišẹ adarí 3-pin
-ṢI |
| RPM1 | Titẹ sii okunfa | Iyara titẹ sii Crankshaft |
| GND_RPM | GND VR igbewọle | Sensọ iyara ilẹ |
| RPM2 | Titẹ sii okunfa | Input iyara camshaft |
| IAC1 | Ijade gbogbogbo | Ijade gbogbogbo 1 max2A |
| IAC2 | Ijade gbogbogbo | Ijade gbogbogbo 2 max2A |
| AIYE | Iṣawọle sensọ | Afẹfẹ otutu otutu |
| CLT | Iṣawọle sensọ | Titẹwọle sensọ otutu otutu |
| TPS | Iṣawọle sensọ | Fifun Ipo ifihan agbara |
| OXY | Iṣawọle | Lambda sensọ ifihan agbara
banki 1 |
| OXY_2 | Iṣawọle | Lambda sensọ ifihan agbara
banki 2 |
| LSU BLACK | O2 Sensọ igbewọle | Bosch LSU BLACK |
| LSU YELLOW | O2 Sensọ igbewọle | Bosch LSU YELLOW |
| LSU RED | O2 Sensọ igbewọle | Bosch LSU pupa |
| LSU GRAY | O2 sensọ Alapapo | Bosch LSU GRAY |
| LSU FUNFUN | O2 sensọ Alapapo | Bosch LSU WHITE |
| LSU GREEN | O2 Sensọ igbewọle | Bosch LSU GREEN |
| 5V | Ipese sensọ | 5V Power Ipese |
| TBL | Iṣawọle | Table Yipada |
| Afikun asopo P1 pinout SM3 (wo aworan pg7) | ||
| EGT+ | K-Iru Input | EGT sensọ igbewọle + |
| AIN1/Flex | Afọwọṣe Analog | Gbogbogbo afọwọṣe input |
| AIN2/JS12 | Afọwọṣe Analog | Gbogbogbo afọwọṣe input |
| PP1 | Afọwọṣe Analog | Gbogbogbo afọwọṣe input |
| PT4 | apoju Sipiyu pinni | !!! PIN taara taara !!! |
| DIN1/NitroIN | DigitalInput | NitroIn igbewọle |
| AIN0/ExtMap | Afọwọṣe Analog | Gbogbogbo afọwọṣe input |
| DIN6/PT6/Datalo jini | Input oni -nọmba | Ibẹrẹ gedu oni nọmba |
| PT1 | apoju Sipiyu pinni | !!! PIN taara taara !!! |
| DIN4 / Ifilole | Iwọle oni-nọmba | Digital ifilọlẹ igbewọle |
| GPO4 / Igbelaruge | Ijade gbogbogbo | Ijade ti eto 1A |
| GPO2/Nitro2 | Ijade gbogbogbo | Ijade ti eto 2A |
| GPO7/VVT | Ijade gbogbogbo | Ijade ti eto 2A |
| GPO5/Tacho | Ijade gbogbogbo | Ijade ti eto 2A |
| GPO8 / Laiṣiṣẹ | Ijade gbogbogbo | Ijade ti eto 2A |
| GPO3/Nitro | Ijade gbogbogbo | Ijade ti eto 2A |
| PK7 | apoju Sipiyu pinni | !!! PIN taara taara !!! |
| AIN3/AD7 | Afọwọṣe Analog | Gbogbogbo afọwọṣe input |
| PT3 | apoju Sipiyu pinni | !!! PIN taara taara !!! |
| Kọlu1 | Kọlu Input | Kọlu Sensọ Input1 |
| Kọlu2 | Kọlu Input | Kọlu Sensọ Input2 |
| PP0 | apoju Sipiyu pinni | !!! PIN taara taara !!! |
| PT5 | apoju Sipiyu pinni | !!! PIN taara taara !!! |
| EGT- | K-Iru Input | Iṣawọle sensọ EGT- |
Idiwon Iyara Engine
Jọwọ lo awọn iyipada DIP (Retro-Fit KdFi v1.4 boards) lati yan iru awọn igbewọle ti o nilo.
Awọn iyipada 1 ati 2 wa fun titẹ sii akọkọ ti o tun le jẹ ifihan agbara CAM fun apẹẹrẹ ninu olupin ti o ko ba ni ami ami ami kan.
Awọn iyipada 3 ati 4 wa fun titẹ sii keji ti o ba lo crank (1) ati igbewọle kamẹra (2). Jọwọ maṣe mu VR ati HALL ṣiṣẹ fun sensọ kan ni akoko kanna. Eyi kii yoo ṣiṣẹ daradara.
- Sensọ VR Iwọn nipasẹ sensọ VR jẹ ọna ibigbogbo julọ ni Yuroopu fun awọn ẹrọ ọkọ ayọkẹlẹ. Ohun AC voltage ti fa sinu okun ti sensọ VR nipasẹ kẹkẹ ti o nfa pẹlu ehin 60-2 tabi 36-1.
- Sensọ HALL le nilo resistor fa-soke ti 1k si 10k ohm laarin ifihan-jade ati +5V.
Potentiometer finasi
Potentiometer finasi ti wa ni ti sopọ soke nipa a 3-waya USB. +5V ati GND ni asopọ si awọn pinni aimi ita ti potentiometer. Awọn voltage jọmọ si awọn finasi ipo ti wa ni tapped nipasẹ awọn sisun olubasọrọ ati ki o ti sopọ si awọn input TPS
(Sensor Ipo Iyọ). Ijinna ti a bo ti potentiometer le gun ju yiyi axle fifa lọ. Isọdiwọn ti o baamu jẹ nipasẹ “Awọn irinṣẹ” - “TPS calibrate”
Awọn igbewọle oni-nọmba
Awọn igbewọle oni-nọmba wa ti o le ṣee lo fun example bi "Iṣakoso ifilọlẹ". Iṣẹ ti o baamu ni lati ṣalaye ni TunerStudio.
apoju Sipiyu pinni
Ṣọra gidigidi nigba lilo awọn wọnyi !! Awọn pinni Sipiyu taara !! won ko ni RC-sisẹ tabi ailewu irinše. Lilo ti ko tọ le run awọn igbewọle Sipiyu,
Ayẹyẹ lilo awọn igbewọle GND ti mu ṣiṣẹ
Awọn igbewọle Analog
Awọn igbewọle afọwọṣe ti o le ṣee lo fun example bi "Afikun otutu". Iṣẹ ti o baamu ni lati ṣalaye ni TunerStudio.
Adarí Iyara Aiṣiṣẹ (Fidle)
SM3 ṣe atilẹyin mejeeji 2-pin ati awọn falifu iyara laišišẹ 3-pin.
Awọn asopọ PIN ti iṣakoso iyara laišišẹ:
- 2- pin: +12V & FDLO
- 3-pin: +12V & FDLO (ṣii) & FDLC (ni pipade)
FDLO & FDLC ti yipada laifọwọyi lori PCB, lo iṣakoso Fidle labẹ TunerStudio,
Ibanuje
Awọn coils iginisonu le mu ṣiṣẹ nipasẹ awọn awakọ agbara imuṣiṣẹpọ ni apapo pẹlu PCB isalẹ ti o ni ipese pẹlu awọn awakọ agbara 4-5or6 ti n muu muu ṣiṣẹ lẹsẹsẹ ti awọn coils iginisonu palolo.
Abẹrẹ
Awọn abajade injector 6 wa (INJ1-6); Awọn falifu abẹrẹ ti wa ni ipese pẹlu + 12 V nipasẹ iyipada ina ati awọn okun waya ilẹ ti awọn injectors ti mu ṣiṣẹ nipasẹ SM3
Ifarabalẹ:
Eto boya awọn falifu abẹrẹ ti ga tabi ti resistance kekere ni lati wa ni titẹ si Awọn Eto Ipilẹ” -“ Awọn abuda Injector ” muna ṣaaju ṣiṣe idanwo akọkọ nitori awọn eto ti ko tọ le fa iparun awọn falifu abẹrẹ tabi ti SM3a.
Awọn iye ibẹrẹ (ko si iṣeduro):
- Imudani ti o ga: PWM Opin Lọwọlọwọ (%): 100 PWM Ibalẹ Akoko (ms): 25.5
- Ilọkuro kekere: Ifilelẹ lọwọlọwọ PWM (%): 30 PWM Ibalẹ Akoko (ms): 1.5
Bluetooth tabi Wifi Asopọ
Iyan bleutooth tabi wifi asopọ nikan ni apapo pẹlu Full SM3+ ECU
Eewọ Wideband Lambda Adarí
Bosch LSU 4.9 sensọ le sopọ taara laisi iwulo lati ra oludari siwaju.
Data isọdiwọn TUNERSTUDIO aṣa gbooro laini gbooro:
0V = Lambda 10.20 = AFR 22.35
4V = Lambda 0.650 = AFR 9.50
Bibẹrẹ ti oludari le ṣee ṣe nipasẹ ilẹ GP2 (afara solder osi) nipasẹ dipswitch (Retro-Fit KdFi v1.4 boards) tabi sọfitiwia-ọlọgbọn nipa yiyan Ijade “Ignition G”(afara solder ọtun) pẹlu eto awọn ibeere alabara. Ie bẹrẹ oludari lambda lẹhin iṣẹju-aaya 30 ti ẹrọ bẹrẹ labẹ ile isise tuner
Ko si ilẹ GP2 yoo ja si ni imurasilẹ lambda oludari.
Kọlu Ọkọ
Kọlu IC naa nlo imọ-kikun ti a ṣe apẹrẹ idi kan amplifier ërún lati àlẹmọ kolu awọn ifihan agbara.
Kọlu Wiring
Kọlu Sensor1-> Tẹwọle knock1 ECU ati ECU ilẹ Kọlu Sensor2-> Knock2 ECU igbewọle ati ECU ilẹ
Lori ọkọ datalogging
Igbimọ naa ni ipese pẹlu 1Gb ti iranti iwọn SMD lori ọkọ.
Setan lati ṣee lo labẹ SD datalogging akojọ
Lori ọkọ RTC (akoko gidi aago)
Awọn ọkọ ni ipese pẹlu kan gan deede RTC, fifun ni seese lati fi 'akoko Stamps' si awọn eewọ data gedu ẹya ara ẹrọ!
Ṣiṣe awọn igbasilẹ data rọrun lati ka, rọrun aṣiṣe ati/tabi awọn ilọsiwaju atunṣe.
CAN akero
Bii MegaSquirt ohun elo Bus CAN ti kun lori igbimọ, ṣugbọn o ni lati ṣe eto ni ibamu nipasẹ olumulo ti o ba fẹ. Fun alaye siwaju sii lori nkan yii jọwọ ka awọn oludari Megasquirt / MSextra webojula.
Olumulo Remarques ati info
Awọn iwe aṣẹ / Awọn orisun
 |
K PERFORMANCE SM3 plus Module [pdf] Afowoyi olumulo 1.5b, R1.5, SM3 plus Module, SM3 plus, Module |
