iBoard IB-192C 4K Interactive Ifihan Ilana Afowoyi

iBoard IB-192C 4K Interactive Ifihan

Awọn akoonu tọju

5 Awọn iwe aṣẹ / Awọn orisun

5.1 Awọn itọkasi

6 jẹmọ Posts

Alaye pataki

KA awọn itọnisọna ni iṣọra KI o to bẹrẹ fifi sori ẹrọ. Yọ awọn akoonu kuro lati apoti ki o si mọ daju gbogbo awọn ẹya ara ti wa ni bayi. IRANLỌWỌ NI iṣeduro.

ROCKER PANEL òke
A BEERE LILU Liluho/Ige

Fastener Iwon	Tighting Torque (ft-lbs)	Ti beere fun
6mm	6-7	X
8mm	16-18	√
10mm	31-32	√
12mm	56-58	X
14mm	92-94	X

AKIYESI IPIN

Abala Akojọ

Package Hardware A (Fun fifi sori akọmọ)

Nkan	QTY	Apejuwe	Nkan	QTY	Apejuwe
1#	2	M10X35 Bolt farahan	6#	6	M10 Hex Eso
2#	2	M10X35 Bolt farahan	7#	2	M8X1.25-35mm Hex boluti
3#	2	M10X1.5-35mm Hex boluti	8#	4	M8 Tobi Flat washers
4#	8	M10 Tobi Flat washers	9#	2	M8 Titiipa Washers
5#	6	M10 Titiipa Washers	10#	2	M8 Hex Eso

Ohun elo Package

Package Hardware B (Fun fifi sori Igbesẹ Pẹpẹ Irin Alagbara)

Nkan	QTY	Apejuwe	Nkan	QTY	Apejuwe
1#	8	M8X1.25-35mm Gbigbe boluti	3#	# 8	M8 Ọra Titii Eso
2#	8	M8 Tobi Flat washers	4#	4	Sliders (Ti kojọpọ pẹlu Awọn ọpa Igbesẹ)

Ohun elo Package

Apejọ Ilana

Igbesẹ 1
Bẹrẹ fifi sori ẹrọ lati ẹgbẹ awakọ iwaju ti ọkọ. Wa (1) factory iho .
Ni isalẹ ti osi iwaju pakà nronu, fi sii (1) M10X35 Bolt Plate sinu ofali iho ni isalẹ ti akojọpọ fireemu ikanni, (Fig 1).

(Eya 1) Driver Side Front iṣagbesori Location

Igbesẹ 2
Yan Awakọ Iṣagbesori Iwakọ iwaju (DFM), so mọ M10X35 Bolt Plate ti a fi sori ẹrọ pẹlu (1) M10 Large Flat Washer, (1) M10 Lock Washer ati () M10 Hex Nut, (Fig 2). Maṣe di ohun elo ni kikun ni akoko yii.

(olusin 2) Driver Front iṣagbesori akọmọ fifi sori

Igbesẹ 3
Nigbamii, yan akọmọ Atilẹyin iwaju Awakọ (DFS), (Fig 3).
So akọmọ Atilẹyin pọ si ẹgbẹ iwaju ti Iwakọ Pẹpẹ Iwakọ pẹlu (1) M10X1.5-35mm Hex Bolt, (2) M10 Large Flat Washers, (1) M10 Lock Washer ati (1) M10 Hex Nut, (Ọpọtọ) 3). Maṣe di ohun elo ni kikun ni akoko yii.

(olusin 3) Driver Front Support akọmọ Apejọ

Igbesẹ 4
Gbe si ẹgbẹ iwakọ ru ipo iṣagbesori. Wa awọn ti o tobi ofali Iho ni pakà nronu. Fi sii (1) M10x35 Bolt Plate sinu Iho, (olusin 4). AKIYESI: Yi Bolt Plate pada ki awo naa wa kọja, kii ṣe inline pẹlu iho oval.
So Akọmọ Iṣagbesori Awakọ Rear (DRM) si M10x35 Bolt Plate pẹlu (1) M10 Aṣọ Flat Large, (1) M10 Lock Washer ati (1) M10 Hex Nut, (Fig 5). AKIYESI: A nilo iho ti o jinlẹ lati mu Hex Nut di soke sinu Bracket. Maṣe di ohun elo ni kikun ni akoko yii.

(olusin 4) Fi sii (1) M10x35 Bolt Awo sinu Iho
(olusin 5) Driver Ru iṣagbesori akọmọ fifi sori

Igbesẹ 5

Ni kete ti gbogbo (2) Awọn biraketi iṣagbesori ẹgbẹ awakọ ti fi sori ẹrọ, lẹhinna tẹsiwaju si fifi sori Pẹpẹ Igbesẹ naa. (Eya 6 & 7)

Yan (1) Slider ati (2) M8X1.25-35mm Carriage Bolts;
Fi sori ẹrọ (2) M8X1.25-35mm Awọn boluti gbigbe ni (1) Slider.

Gbe Slider (pẹlu awọn boluti gbigbe) si Pẹpẹ Igbesẹ.
Tun lati fi sori ẹrọ miiran (1) esun si ọpa igbesẹ.

So Pẹpẹ Igbesẹ (pẹlu Awọn Sliders) sori awọn biraketi iṣagbesori ti a fi sii. Gbe awọn Sliders si awọn biraketi ti a fi sii. Ṣe aabo Pẹpẹ Igbesẹ si Awọn Biraketi ti a fi sori ẹrọ nipasẹ lilo (4) M8 Awọn ifoso Flat Tobi ati (4) Awọn eso Titiipa Nylon M8 ati (2) Awọn agbelera, (Fig 7). Maṣe di ohun elo ni kikun ni akoko yii.

Akiyesi: Awọn Sliders ti wa ni aba ti pẹlu Igbesẹ Ifi.

Igbesẹ 6
Pẹlu ohun elo akọmọ Ipele Igbesẹ alaimuṣinṣin, fa awọn biraketi si ita kuro ninu ọkọ fun imukuro to dara.

(Eya 6) Fifi sori Slider

Igbesẹ 7
Laini soke Driver Front Support akọmọ (DFS) pẹlu awọn pada ti awọn weld fun pọ, (olusin 8). Titari akọmọ Atilẹyin soke bi o ti ṣee ṣe si ibiti weld fun pọ pade nronu ilẹ. Maa ko ni kikun Mu hardware.
Ṣayẹwo Pẹpẹ Igbesẹ fun ipele. Ni kete ti o ba ṣe deede deede ati ṣatunṣe, Mu gbogbo ohun elo pọ. PATAKI: Ti akọmọ Atilẹyin ba kere ju ati sunmọ eti weld fun pọ, tú akọmọ Atilẹyin ati ohun elo akọmọ iwaju. Titari akọmọ ati Atilẹyin akọmọ soke kekere kan si ipo lodi si awọn pakà nronu ati kuro lati awọn eti ti awọn weld fun pọ, (Fig 8). Ipele ati ṣatunṣe Pẹpẹ Igbesẹ daradara ati Mu gbogbo ohun elo pọ.

(Fig 7) Igbesẹ Pẹpẹ fifi sori

Igbesẹ 8
Lo iho ni Atilẹyin akọmọ bi a guide to a samisi awọn liluho ipo lori pada ti awọn weld fun pọ, (Fig 8). Ni kete ti o ba ti samisi ipo naa, yọ ọpa igbesẹ kuro fun igba diẹ, akọmọ iṣagbesori iwaju ati Atilẹyin Atilẹyin. Yọ awọn agekuru ṣiṣu kuro ni aabo ideri apata ṣiṣu si nronu apata.
Lo 5/16” lilu bit ati farabalẹ lu ipo ti o samisi.
AKIYESI: Ideri nronu apata ṣiṣu le nilo lati ge gige lati ko bolt hex kuro fun Akọmọ Atilẹyin. PATAKI: Eyikeyi gige tabi ohun elo liluho le fọ tabi fọ. Awọn ilana ijọba nilo awọn gilaasi aabo & ohun elo ni gbogbo igba nigba gige tabi liluho.

Igbesẹ 9
Tun-fi sori ẹrọ ni ẹgbẹ iwakọ iwaju iṣagbesori akọmọ ati Support akọmọ. So akọmọ Atilẹyin pọ si weld fun pọ pẹlu (1) M8X1.25-35mm Hex Bolt, (2) M8 Awọn ifoso Flat Tobi, (1) M8 Lock Washer ati (1) M8 Hex Nut, (Fig 9). AKIYESI: Fi M8 Hex Bolt sii pẹlu (1) M8 Large Flat Washer nipasẹ awọn weld fun pọ ni akọkọ, lẹhinna nipasẹ akọmọ.
Ge ideri nronu apata bi o ṣe nilo ki o tun fi ideri naa sori ẹrọ pẹlu awọn agekuru ṣiṣu ile-iṣẹ. Tun Fi Igbesẹ Pẹpẹ sii.

(Eya 9) Fifi sori Atilẹyin Iwaju Awakọ (Eksample)

Igbesẹ 10
Ipele ati ṣatunṣe Pẹpẹ Igbesẹ ati mu gbogbo ohun elo ni kikun.

Igbesẹ 11
Tun Igbesẹ 1-11 ṣe fun fifi sori Igbesẹ Pẹpẹ ẹgbẹ miiran. Fifi sori ẹrọ ti pari.

Ifarabalẹ
Ṣe awọn ayewo igbakọọkan si fifi sori ẹrọ lati rii daju pe gbogbo ohun elo wa ni aabo ati wiwọ.
Lati le daabobo awọn ifi/paadi rẹ, jọwọ lo ọṣẹ kekere/awọn ọja ti kii ṣe abrasive fun mimọ nikan.