ARDUINO ABX00087 UNO R4 WiFi
ọja Alaye
Ọja Itọkasi Afowoyi SKU: ABX00087
Apejuwe: Awọn agbegbe ibi-afẹde: Ẹlẹda, olubere, ẹkọ
Awọn ẹya:
- R7FA4M1AB3CFM # AA0, nigbagbogbo tọka si RA4M1 ninu iwe data yii, jẹ MCU akọkọ lori UNO R4 WiFi, ti o sopọ si gbogbo awọn akọle pin lori igbimọ ati gbogbo awọn ọkọ akero ibaraẹnisọrọ.
- Iranti: 256 kB Flash Memory, 32 kB SRAM, 8 kB Data Memory (EEPROM)
- Awọn agbeegbe: Ẹgbẹ Sensing Capacitive Touch (CTSU), Module Iyara Kikun USB 2.0 (USBFS), 14-bit ADC, Titi di 12-bit DAC, Iṣiṣẹ Ampolufiranṣẹ (OPAMP)
- Ibaraẹnisọrọ: 1x UART (pin D0, D1), 1x SPI (pin D10-D13, akọsori ICSP), 1x I2C (pin A4, A5, SDA, SCL), 1x CAN (pin D4, D5, transceiver ita nilo)
Fun awọn alaye imọ-ẹrọ diẹ sii lori R7FA4M1AB3CFM # AA0 microcontroller, ṣabẹwo si R7FA4M1AB3CFM#AA0 datasheet.
Awọn ẹya ESP32-S3-MINI-1-N8:
- Ẹya yii n ṣiṣẹ bi MCU Atẹle lori UNO R4 WiFi ati sọrọ pẹlu RA4M1 MCU nipa lilo onitumọ ipele kannaa.
- Ṣe akiyesi pe module yii nṣiṣẹ lori 3.3 V ni idakeji si RA4M1's 5 V ṣiṣẹ vol.tage.
Fun awọn alaye imọ-ẹrọ diẹ sii lori module ESP32-S3-MINI-1-N8, ṣabẹwo si ESP32-S3-MINI-1-N8data.
Awọn ilana Lilo ọja
Awọn ipo iṣẹ ti a ṣeduro:
| Aami | Apejuwe | Min | Iru | O pọju |
|---|---|---|---|---|
| VIN | Iwọn titẹ siitage lati VIN paadi / DC Jack | 6 | 7.0 | 24 |
| VUSB | Iwọn titẹ siitage lati USB asopo | 4.8 | 5.0 | 5.5 |
| TOP | Awọn iwọn otutu ti nṣiṣẹ | -40 | 25 | 85 |
Ti pari iṣẹ -ṣiṣeview:
Awọn ọna voltage fun RA4M1 wa titi ni 5 V lati jẹ ohun elo ibaramu pẹlu awọn apata, awọn ẹya ẹrọ, ati awọn iyika ti o da lori awọn igbimọ Arduino UNO ti tẹlẹ.
Topology Board:
Iwaju View:
Ref. U1 U2 U3 U4 U5 U6 U_LEDMATRIX M1 PB1 JANALOG JDIGITAL JOFF J1 J2 J3 J5 J6 DL1
Oke View:
Ref. DL2 LED RX (gba ni tẹlentẹle), DL3 LED Power (alawọ ewe), DL4 LED SCK (tẹlentẹle aago), D1 PMEG6020AELRX Schottky Diode, D2 PMEG6020AELRX Schottky Diode, D3 PRTR5V0U2X,215 ESD Idaabobo
Akọsori ESP:
Akọsori ti o wa nitosi bọtini atunbere le ṣee lo lati wọle si module ESP32-S3 taara. Awọn pinni wiwọle ni:
- ESP_IO42 – MTMS n ṣatunṣe aṣiṣe (Pin 1)
- ESP_IO41 – MTDI n ṣatunṣe aṣiṣe (Pin 2)
- ESP_TXD0 – Gbigbe Serial (UART) (Pin 3)
- ESP_DOWNLOAD – bata (Pin 4)
- ESP_RXD0 – Gbigba Serial (UART) (Pin 5)
- GND – ilẹ (Pin 6)
Apejuwe
Arduino® UNO R4 WiFi jẹ igbimọ UNO akọkọ lati ṣe ẹya microcontroller 32-bit ati module ESP32-S3 Wi-Fi® kan (ESP32-S3-MINI-1-N8). O ṣe ẹya microcontroller jara RA4M1 lati Renesas (R7FA4M1AB3CFM # AA0), ti o da lori 48 MHz Arm® Cortex®-M4 microprocessor. Iranti UNO R4 WiFi tobi ju awọn ti iṣaaju lọ, pẹlu filasi 256 kB, 32 kB SRAM ati 8 kB ti EEPROM.
Awọn RA4M1 ká ṣiṣẹ voltage ti wa titi ni 5 V, lakoko ti module ESP32-S3 jẹ 3.3 V. Ibaraẹnisọrọ laarin awọn MCU meji wọnyi ni a ṣe nipasẹ onitumọ ipele kannaa (TXB0108DQSR).
Awọn agbegbe ibi-afẹde:
Ẹlẹda, olubere, ẹkọ
Awọn ẹya ara ẹrọ
R7FA4M1AB3CFM # AA0, nigbagbogbo tọka si RA4M1 ninu iwe data yii, jẹ MCU akọkọ lori UNO R4 WiFi, ti o sopọ si gbogbo awọn akọle pin lori igbimọ ati gbogbo awọn ọkọ akero ibaraẹnisọrọ.
Pariview
- 48 MHz Arm® Cortex®-M4 microprocessor pẹlu aaye aaye lilefoofo (FPU) 5 V ti n ṣiṣẹtage
- Aago gidi-gidi (RTC)
- Ẹka Idaabobo Iranti (MPU)
- Iyipada oni-si-afọwọṣe (DAC)
Iranti
- 256 kB Flash Memory
- 32 kB SRAM
- 8kB Data Iranti (EEPROM)
Awọn agbeegbe
- Ẹka Sensing Capacitive Touch (CTSU)
- Modulu Iyara Kikun USB 2.0 (USBFS)
- 14-bit ADC
- Titi di 12-bit DAC
- Iṣiṣẹ Ampolufẹ (OPAMP)
Agbara
- Iwọn iṣẹtage fun RA4M1 jẹ 5 V
- Niyanju igbewọle voltage (VIN) jẹ 6-24 V
- Jack Barrel ti sopọ mọ PIN VIN (6-24V)
- Agbara nipasẹ USB-C® ni 5 V
Ibaraẹnisọrọ
- 1 x UART (pin D0, D1)
- 1x SPI (pin D10-D13, akọsori ICSP)
- 1x I2C (pin A4, A5, SDA, SCL)
- 1x CAN (pin D4, D5, transceiver ita nilo)
Wo iwe data ni kikun fun R7FA4M1AB3CFM#AA0 ni ọna asopọ ni isalẹ:
- R7FA4M1AB3CFM#AA0 datasheet
ESP32-S3-MINI-1-N8 jẹ MCU keji pẹlu eriali ti a ṣe sinu fun Wi-Fi® & Asopọmọra Bluetooth®. Yi module nṣiṣẹ lori 3.3 V ati ki o ibasọrọ pẹlu awọn RA4M1 lilo a kannaa ipele onitumo (TXB0108DQSR).
Pariview
- Xtensa® meji-mojuto 32-bit LX7 microprosessor
- 3.3 V ṣiṣẹ voltage
- 40 MHz gara oscillator
WiFi®
- Atilẹyin Wi-Fi® pẹlu iwọn 802.11 b/g/n (Wi-Fi® 4)
- Oṣuwọn Bit ni to 150 Mbps
- 2.4 GHz iye
Bluetooth®
- Bluetooth® 5
Wo iwe kikun data fun ESP32-S3-MINI-1-N8 ni ọna asopọ ni isalẹ:
- ESP32-S3-MINI-1-N8 iwe
Igbimọ naa
Ohun elo Examples
UNO R4 WiFi jẹ apakan ti jara UNO akọkọ ti awọn igbimọ idagbasoke 32-bit, ti o da tẹlẹ lori awọn alabojuto microcontroller 8-bit AVR. Awọn ẹgbẹẹgbẹrun awọn itọsọna wa, awọn olukọni ati awọn iwe ti a kọ nipa igbimọ UNO, nibiti UNO R4 WiFi ti n tẹsiwaju ohun-ini rẹ.
Igbimọ naa ni awọn ebute I/O oni-nọmba 14, awọn ikanni afọwọṣe 6, awọn pinni igbẹhin fun awọn asopọ I2C, SPI ati UART. O ni iranti ti o tobi pupọ: Awọn akoko 8 diẹ sii iranti filasi (256 kB) ati awọn akoko 16 SRAM diẹ sii (32 kB). Pẹlu iyara aago 48 MHz, o tun jẹ iyara 3x ju awọn iṣaaju rẹ lọ.
Ni afikun, o ṣe ẹya ESP32-S3 module fun Wi-Fi® & Asopọmọra Bluetooth®, bakanna bi 12 × 8 LED matrix ti a ṣe sinu, ṣiṣe ọkan ninu igbimọ Arduino alailẹgbẹ julọ ti oju julọ titi di oni. Matrix LED jẹ siseto ni kikun, nibiti o le gbe ohunkohun lati awọn fireemu iduro si awọn ohun idanilaraya aṣa.
Awọn iṣẹ akanṣe ipele-iwọle: Ti eyi ba jẹ iṣẹ akanṣe akọkọ rẹ laarin ifaminsi ati ẹrọ itanna, UNO R4 WiFi jẹ ibamu to dara. O rọrun lati bẹrẹ pẹlu, ati pe o ni ọpọlọpọ awọn iwe ori ayelujara.
Awọn ohun elo IoT ti o rọrun: kọ awọn iṣẹ akanṣe laisi kikọ koodu Nẹtiwọọki eyikeyi ninu awọsanma Arduino IoT. Ṣe abojuto igbimọ rẹ, so pọ pẹlu awọn igbimọ ati awọn iṣẹ miiran, ati dagbasoke awọn iṣẹ akanṣe IoT ti o tutu.
Matrix LED: 12 × 8 LED matrix lori ọkọ le ṣee lo fun iṣafihan awọn ohun idanilaraya, yiyi ọrọ, ṣẹda awọn ere kekere ati pupọ diẹ sii, jẹ ẹya pipe lati fun iṣẹ akanṣe rẹ ni ihuwasi diẹ sii.
Jẹmọ Products
- UNO R3
- UNO R3 SMD
- UNO R4 Minima
Idiwon
Niyanju Awọn ipo Ṣiṣẹ
| Aami | Apejuwe | Min | Iru | O pọju | Ẹyọ |
| VIN | Iwọn titẹ siitage lati VIN paadi / DC Jack | 6 | 7.0 | 24 | V |
| VUSB | Iwọn titẹ siitage lati USB asopo | 4.8 | 5.0 | 5.5 | V |
| TOP | Awọn iwọn otutu ti nṣiṣẹ | -40 | 25 | 85 | °C |
Akiyesi: VDD n ṣakoso ipele kannaa ati pe o ni asopọ si iṣinipopada agbara 5V. VAREF jẹ fun afọwọṣe kannaa.
Ti pari iṣẹ -ṣiṣeview
Àkọsílẹ aworan atọka
Board Topology
Iwaju View
| Ref. | Apejuwe |
| U1 | R7FA4M1AB3CFM#AA0 Microcontroller IC |
| U2 | NLASB3157DFT2G Multiplexer |
| U3 | ISL854102FRZ-T ẹtu Ayipada |
| U4 | TXB0108DQSR onitumọ ipele kannaa (5 V – 3.3 V) |
| U5 | SGM2205-3.3XKC3G/TR 3.3 V laini eleto |
| U6 | NLASB3157DFT2G Multiplexer |
| U_LEDMATRIX | 12× 8 LED Red Matrix |
| M1 | ESP32-S3-MINI-1-N8 |
| PB1 | Bọtini Tunto |
| JANALOG | Afọwọṣe titẹ sii/jade awọn akọle |
| JDIGITAL | Digital input / o wu afori |
| JOFF | PA, VRTC akọsori |
| J1 | CX90B-16P USB-C® asopo |
| J2 | SM04B-SRSS-TB (LF) (SN) I2C asopo ohun |
| J3 | Akọsori ICSP (SPI) |
| J5 | DC Jack |
| J6 | ESP akọsori |
| DL1 | LED TX (gbigbe ni tẹlentẹle) |
| DL2 | LED RX (gbigba ni tẹlentẹle) |
| DL3 | Agbara LED (alawọ ewe) |
| DL4 | LED SCK (aago ni tẹlentẹle) |
| D1 | PMEG6020AELRX Schottky Diode |
| D2 | PMEG6020AELRX Schottky Diode |
| D3 | PRTR5V0U2X,215 ESD Idaabobo |
Microcontroller (R7FA4M1AB3CFM#AA0)
UNO R4 WiFi da lori 32-bit RA4M1 jara microcontroller, R7FA4M1AB3CFM # AA0, lati Renesas, eyiti o nlo microprocessor 48 MHz Arm® Cortex®-M4 pẹlu ẹyọ aaye floating kan (FPU).
Awọn ọna voltage fun RA4M1 ti wa ni titọ ni 5 V lati jẹ ohun elo ibaramu pẹlu awọn apata, awọn ẹya ẹrọ & awọn iyika ti o da lori awọn igbimọ Arduino UNO ti tẹlẹ.
The R7FA4M1AB3CFM#AA0 features:
- 256 kB filaṣi / 32 kB SRAM / 8 kB data filaṣi (EEPROM)
- Aago gidi-gidi (RTC)
- 4x Alakoso Wiwọle Iranti Taara (DMAC)
- 14-bit ADC
- Titi di 12-bit DAC
- OPAMP
- LE akero
Fun awọn alaye imọ-ẹrọ diẹ sii lori microcontroller yii, ṣabẹwo si Renesas – RA4M1 jara awọn iwe aṣẹ aṣẹ.
6 Wi-Fi® / Bluetooth® Module (ESP32-S3-MINI-1-N8)
Wi-Fi® / Bluetooth® LE module lori UNO R4 WiFi wa lati awọn ESP32-S3 SoCs. O ṣe ẹya Xtensa® dual-core 32-bit LX7 MCU, eriali ti a ṣe sinu ati atilẹyin fun awọn ẹgbẹ 2.4 GHz.
Awọn ẹya ESP32-S3-MINI-1-N8:
- Wi-Fi® 4 – 2.4 GHz band
- Bluetooth® 5 LE atilẹyin
- 3.3 V ṣiṣẹ voltage 384 kB ROM
- 512 kB SRAM
- Titi di 150 Mbps oṣuwọn bit
Eleyi module ìgbésẹ bi a Atẹle MCU lori UNO R4 WiFi, ati ki o ibasọrọ pẹlu awọn RA4M1 MCU lilo a kannaa ipele onitumo. Ṣe akiyesi pe module yii nṣiṣẹ lori 3.3 V ni idakeji si RA4M1's 5 V ṣiṣẹ vol.tage.
ESP akọsori
Akọsori ti o wa nitosi bọtini atunbere le ṣee lo lati wọle si module ESP32-S3 taara. Awọn pinni wiwọle ni:
- ESP_IO42 – MTMS n ṣatunṣe aṣiṣe (Pin 1)
- ESP_IO41 – MTDI n ṣatunṣe aṣiṣe (Pin 2)
- ESP_TXD0 – Gbigbe Serial (UART) (Pin 3)
- ESP_DOWNLOAD – bata (Pin 4)
- ESP_RXD0 – Gbigba Serial (UART) (Pin 5)
- GND – ilẹ (Pin 6)
USB Afara
Nigbati o ba n ṣe eto UNO R4 WiFi, RA4M1 MCU ti ṣe eto nipasẹ module ESP32-S3 nipasẹ aiyipada. Awọn iyipada U2 ati U6 le yipada ibaraẹnisọrọ USB lati lọ taara si RA4M1 MCU, nipa kikọ ipo giga si pin P408 (D40).
Tita papọ awọn paadi SJ1 nigbagbogbo ṣeto ibaraẹnisọrọ USB taara si RA4M1, ni ikọja ESP32-S3.
Asopọ USB
UNO R4 WiFi ni ibudo USB-C® kan, ti a lo lati fi agbara ati ṣeto igbimọ rẹ bakanna bi fifiranṣẹ & gbigba ibaraẹnisọrọ ni tẹlentẹle.
Akiyesi: Igbimọ ko yẹ ki o ni agbara pẹlu diẹ ẹ sii ju 5 V nipasẹ ibudo USB-C®.
LED Matrix
UNO R4 WiFi ṣe ẹya 12 × 8 matrix ti awọn LED pupa (U_LEDMATRIX), ti a ti sopọ nipa lilo ilana ti a mọ si charlieplexing.
Awọn pinni wọnyi lori RA4M1 MCU ni a lo fun matrix naa:
- P003
- P004
- P011
- P012
- P013
- P015
- P204
- P205
- P206
- P212
- P213
Awọn LED wọnyi le wọle si bi opo, lilo ile-ikawe kan pato. Wo maapu ni isalẹ:
Eleyi matrix le ṣee lo fun awọn nọmba kan ti ise agbese ati prototyping ìdí, ati ki o atilẹyin iwara, o rọrun game awọn aṣa ati yiyi ọrọ laarin awọn ohun miiran.
Oluyipada Analog Digital (DAC)
UNO R4 WiFi ni DAC kan pẹlu ipinnu 12-bit ti o so mọ pin afọwọṣe A0. A lo DAC lati yi ifihan agbara oni-nọmba pada si ifihan agbara afọwọṣe.
DAC le ṣee lo fun iran ifihan agbara fun apẹẹrẹ awọn ohun elo ohun, bii ti ipilẹṣẹ ati yiyipada igbi sawtooth.
I2C Asopọmọra
I2C asopo SM04B-SRSS-TB (LF) (SN) ti wa ni ti sopọ si a Atẹle I2C akero lori awọn ọkọ. Ṣe akiyesi pe asopo yii ni agbara nipasẹ 3.3 V.
Asopọmọra yii tun pin awọn asopọ pin wọnyi:
JANALOG akọsori
- A4
- A5
JDIGITAL akọsori
- SDA
- SCL
Akiyesi: bi A4/A5 ti sopọ si ọkọ akero I2C akọkọ, awọn wọnyi ko yẹ ki o lo bi awọn igbewọle ADC nigbakugba ti ọkọ akero wa ni lilo. Sibẹsibẹ o le so awọn ẹrọ I2C pọ si ọkọọkan awọn pinni ati awọn asopọ ni nigbakannaa.
Awọn aṣayan agbara
Agbara le jẹ ipese nipasẹ pin VIN, tabi nipasẹ asopọ USB-C®. Ti o ba pese agbara nipasẹ VIN, oluyipada owo ISL854102FRZ ṣe igbesẹ vol.tage si isalẹ 5V.
Mejeeji VUSB ati awọn pinni VIN ti sopọ si oluyipada ẹtu ISL854102FRZ, pẹlu awọn diodes Schottky ni aye fun iyipada polarity & overvoltage Idaabobo lẹsẹsẹ.
Agbara nipasẹ awọn ipese USB nipa ~ 4.7 V (nitori Schottky ju) si RA4M1 MCU.
Olutọsọna laini (SGM2205-3.3XKC3G/TR) yipada 5 V lati boya oluyipada ẹtu tabi USB, ati pese 3.3 V si nọmba awọn paati, pẹlu module ESP32-S3.
Agbara Igi
Pin Voltage
Awọn lapapọ ṣiṣẹ voltage fun UNO R4 WiFi ni 5 V, sibẹsibẹ ESP32-S3 module ká ṣiṣẹ voltage ni 3.3V.
Akiyesi: O ṣe pataki pupọ pe awọn pinni ESP32-S3 (3.3 V) ko ni olubasọrọ pẹlu eyikeyi awọn pinni RA4M1 (5 V), nitori eyi le ba awọn iyika jẹ.
Pin Lọwọlọwọ
Awọn GPIO lori R7FA4M1AB3CFM#AA0 microcontroller le mu lailewu to 8 mA lọwọlọwọ. Maṣe so awọn ẹrọ ti o fa lọwọlọwọ giga taara si GPIO nitori eyi le ba Circuit jẹ.
Fun fifi agbara fun apẹẹrẹ servo Motors, nigbagbogbo lo ipese agbara ita.
Darí Information
Pinout
Analog
| Pin | Išẹ | Iru | Apejuwe |
| 1 | Bọọlu | NC | Ko Sopọ |
| 2 | IOREF | IOREF | Itọkasi fun ọgbọn oni-nọmba V – ti sopọ si 5 V |
| 3 | Tunto | Tunto | Tunto |
| 4 | + 3V3 | Agbara | + 3V3 Agbara Rail |
| 5 | + 5V | Agbara | + 5V Agbara Rail |
| 6 | GND | Agbara | Ilẹ |
| 7 | GND | Agbara | Ilẹ |
| 8 | VIN | Agbara | Voltage Input |
| 9 | A0 | Analog | Afọwọṣe titẹ sii 0 / DAC |
| 10 | A1 | Analog | Titẹwọle Analog 1 / OPAMP+ |
| 11 | A2 | Analog | Titẹwọle Analog 2 / OPAMP- |
| 12 | A3 | Analog | Titẹwọle Analog 3 / OPAMPJade |
| 13 | A4 | Analog | Iṣagbewọle Analog 4/I2C Data Serial (SDA) |
| 14 | A5 | Analog | Iṣagbewọle Analog 5/I2C Serial Aago (SCL) |
Oni-nọmba
| Pin | Išẹ | Iru | Apejuwe |
| 1 | SCL | Oni-nọmba | Aago Serial I2C (SCL) |
| 2 | SDA | Oni-nọmba | Data Serial I2C (SDA) |
| 3 | AREF | Oni-nọmba | Afọwọṣe Reference Voltage |
| 4 | GND | Agbara | Ilẹ |
| 5 | D13 / SCK / CANRX0 | Oni-nọmba | GPIO 13 / Aago SPI / Olugba CAN (RX) |
| 6 | D12/CIPO | Oni-nọmba | GPIO 12 / SPI Adarí Ni Agbeegbe Jade |
| 7 | D11/COPI | Oni-nọmba | GPIO 11 (PWM) / SPI Adarí Jade Agbeegbe Ni |
| 8 | D10 / CS / CATX0 | Oni-nọmba | GPIO 10 (PWM) / SPI Chip Select / le Atagba (TX) |
| 9 | D9 | Oni-nọmba | GPIO 9 (PWM~) |
| 10 | D8 | Oni-nọmba | GPIO 8 |
| 11 | D7 | Oni-nọmba | GPIO 7 |
| 12 | D6 | Oni-nọmba | GPIO 6 (PWM~) |
| 13 | D5 | Oni-nọmba | GPIO 5 (PWM~) |
| 14 | D4 | Oni-nọmba | GPIO 4 |
| 15 | D3 | Oni-nọmba | GPIO 3 (PWM~) |
| 16 | D2 | Oni-nọmba | GPIO 2 |
| 17 | D1/TX0 | Oni-nọmba | GPIO 1 / Serial 0 Atagba (TX) |
| 18 | D0/TX0 | Oni-nọmba | GPIO 0 / Serial 0 Olugba (RX) |
PAA
| Pin | Išẹ | Iru | Apejuwe |
| 1 | PAA | Agbara | Fun iṣakoso ipese agbara |
| 2 | GND | Agbara | Ilẹ |
| 1 | VRTC | Agbara | Asopọ batiri si agbara RTC nikan |
ICSP
| Pin | Išẹ | Iru | Apejuwe |
| 1 | CIPO | Ti abẹnu | Adarí Ni Agbeegbe Out |
| 2 | + 5V | Ti abẹnu | Ipese agbara ti 5V |
| 3 | SCK | Ti abẹnu | Serial Aago |
| 4 | COPI | Ti abẹnu | Adarí Jade Agbeegbe Ni |
| 5 | Tunto | Ti abẹnu | Tunto |
| 6 | GND | Ti abẹnu | Ilẹ |
Iṣagbesori Iho Ati Board ìla
Board Isẹ
- Bibẹrẹ - IDE
Ti o ba fẹ ṣe eto UNO R4 WiFi rẹ lakoko offline o nilo lati fi Arduino® IDE Desktop [1] sori ẹrọ. Lati so UNO R4 WiFi pọ mọ kọnputa rẹ, iwọ yoo nilo okun USB Iru-C® kan, eyiti o tun le pese agbara si igbimọ, gẹgẹ bi itọkasi nipasẹ LED (DL1). - Bibẹrẹ - Arduino Web Olootu
Gbogbo awọn igbimọ Arduino, pẹlu ọkan yii, ṣiṣẹ ni ita-apoti lori Arduino® Web Olootu [2], nipa fifi sori ẹrọ ti o rọrun.
Arduino naa Web Olootu ti gbalejo lori ayelujara, nitorinaa yoo ma jẹ imudojuiwọn nigbagbogbo pẹlu awọn ẹya tuntun ati atilẹyin fun gbogbo awọn igbimọ. Tẹle [3] lati bẹrẹ ifaminsi lori ẹrọ aṣawakiri ati gbejade awọn aworan afọwọya rẹ sori igbimọ rẹ. - Bibẹrẹ - Arduino IoT Cloud
Gbogbo awọn ọja Arduino IoT ṣiṣẹ ni atilẹyin lori Arduino IoT Cloud eyiti o fun ọ laaye lati wọle, yaworan ati itupalẹ data sensọ, awọn iṣẹlẹ nfa, ati adaṣe ile tabi iṣowo rẹ. - Awọn orisun Ayelujara
Ni bayi ti o ti lọ nipasẹ awọn ipilẹ ti ohun ti o le ṣe pẹlu igbimọ o le ṣawari awọn aye ailopin ti o pese nipa ṣiṣe ayẹwo awọn iṣẹ akanṣe ti o wa lori Arduino Project Hub [4], Itọkasi Ile-ikawe Arduino [5], ati ile itaja ori ayelujara [6] ]; nibi ti o ti yoo ni anfani lati iranlowo rẹ ọkọ pẹlu sensosi, actuators ati siwaju sii. - Board Gbigba
Gbogbo awọn igbimọ Arduino ni bootloader ti a ṣe sinu eyiti ngbanilaaye ikosan igbimọ nipasẹ USB. Ni ọran ti aworan afọwọya kan tilekun ero isise naa ati pe igbimọ ko le de ọdọ mọ nipasẹ USB, o ṣee ṣe lati tẹ ipo bootloader sii nipa titẹ ni ilopo bọtini atunto lẹsẹkẹsẹ lẹhin agbara-soke.
Awọn iwe-ẹri
15 Ikede ibamu CE DoC (EU)
A n kede labẹ ojuse wa nikan pe awọn ọja ti o wa loke wa ni ibamu pẹlu awọn ibeere pataki ti Awọn itọsọna EU atẹle ati nitorinaa yẹ fun gbigbe ọfẹ laarin awọn ọja ti o ni European
Iṣọkan (EU) ati Agbegbe Iṣowo Ilu Yuroopu (EEA).
16 Ikede Ibamu si EU RoHS & REACH 211 01/19/2021
Awọn igbimọ Arduino wa ni ibamu pẹlu Ilana RoHS 2 2011/65/EU ti Ile-igbimọ European ati Ilana RoHS 3 2015/863/EU ti Igbimọ ti 4 Okudu 2015 lori ihamọ lilo awọn nkan eewu kan ninu itanna ati ẹrọ itanna.
| Ohun elo | O pọju (ppm) |
| Asiwaju | 1000 |
| Cadmium (CD) | 100 |
| Makiuri (Hg) | 1000 |
| Chromium Hexavalent (Cr6+) | 1000 |
| Poly Brominated Biphenyls (PBB) | 1000 |
| Poly Brominated Diphenyl ethers (PBDE) | 1000 |
| Bis (2-Ethylhexyl} phthalate (DEHP) | 1000 |
| Benzyl butyl phthalate (BBP) | 1000 |
| Dibutyl phthalate (DBP) | 1000 |
| Diisobutyl phthalate (DIBP) | 1000 |
Awọn imukuro: Ko si awọn imukuro ti a beere.
Awọn igbimọ Arduino ni ibamu ni kikun pẹlu awọn ibeere ti o jọmọ ti Ilana European Union (EC) 1907 / 2006 nipa Iforukọsilẹ, Iṣiroye, Aṣẹ ati Ihamọ Awọn Kemikali (DE). A ko kede ọkan ninu awọn SVHC (https://echa.europa.eu/web/ alejo / oludije-akojọ-tabili), Akojọ Oludije ti Awọn nkan ti Ibakcdun Gidigidi fun aṣẹ lọwọlọwọ ti a tu silẹ nipasẹ ECHA, wa ni gbogbo awọn ọja (ati package paapaa) ni awọn iwọn lapapọ ni ifọkansi dogba tabi loke 0.1%. Ti o dara julọ ti imọ wa, a tun kede pe awọn ọja wa ko ni eyikeyi ninu awọn nkan ti a ṣe akojọ lori “Atokọ Aṣẹ” (Annex XIV ti awọn ilana REACH) ati Awọn nkan ti Ibakcdun Giga Giga (SVHC) ni eyikeyi awọn oye pataki bi pato nipasẹ Annex XVII ti atokọ oludije ti a tẹjade nipasẹ EHA (Ile-iṣẹ Kemikali Yuroopu) 1907 / 2006/EC.
Ìkéde ohun alumọni rogbodiyan
Gẹgẹbi olutaja agbaye ti itanna ati awọn paati itanna, Arduino mọ awọn adehun wa pẹlu awọn ofin ati ilana nipa Awọn ohun alumọni Rogbodiyan, ni pataki Dodd-Frank Wall Street Reform ati Ofin Idaabobo Olumulo, Abala 1502. Arduino ko ni orisun taara tabi rogbodiyan ilana. ohun alumọni bi Tin, Tantalum, Tungsten, tabi Gold. Awọn ohun alumọni rogbodiyan wa ninu awọn ọja wa ni irisi tita, tabi bi paati ninu awọn ohun elo irin. Gẹgẹbi apakan ti oye ti oye wa Arduino ti kan si awọn olupese paati laarin pq ipese wa lati rii daju pe wọn tẹsiwaju ibamu pẹlu awọn ilana. Da lori alaye ti o gba titi di isisiyi a kede pe awọn ọja wa ni Awọn ohun alumọni Ija ti o jade lati awọn agbegbe ti ko ni ija.
FCC Išọra
Eyikeyi awọn iyipada tabi awọn iyipada ti ko fọwọsi ni pato nipasẹ ẹgbẹ ti o ni iduro fun ibamu le sọ aṣẹ olumulo di ofo lati ṣiṣẹ ohun elo naa.
Ẹrọ yii ni ibamu pẹlu apakan 15 ti Awọn ofin FCC. Iṣiṣẹ jẹ koko-ọrọ si awọn ipo meji wọnyi:
- Ẹrọ yii le ma fa kikọlu ipalara
- Ẹrọ yii gbọdọ gba kikọlu eyikeyi ti o gba, pẹlu kikọlu ti o le fa iṣẹ ti ko fẹ.
Gbólóhùn Ifihan Radiation FCC RF:
- Atagba yii ko gbọdọ wa ni ipo tabi ṣiṣẹ ni apapo pẹlu eyikeyi eriali miiran tabi atagba.
- Ohun elo yii ni ibamu pẹlu awọn opin ifihan itankalẹ RF ti a ṣeto fun agbegbe ti a ko ṣakoso.
- Ohun elo yii yẹ ki o fi sii ati ṣiṣẹ pẹlu aaye to kere ju 20 cm laarin radiator & ara rẹ.
Awọn iwe afọwọkọ olumulo fun ohun elo redio ti ko ni iwe-aṣẹ yoo ni atẹle tabi akiyesi deede ni ipo ti o han gbangba ninu iwe afọwọkọ olumulo tabi ni omiiran lori ẹrọ tabi mejeeji. Ẹrọ yii ni ibamu pẹlu awọn boṣewa RSS laisi iwe-aṣẹ Ile-iṣẹ Canada.
Iṣiṣẹ jẹ koko-ọrọ si awọn ipo meji wọnyi:
- ẹrọ yi le ma fa kikọlu
- Ẹrọ yii gbọdọ gba kikọlu eyikeyi, pẹlu kikọlu ti o le fa iṣẹ ti a ko fẹ fun ẹrọ naa.
Ikilọ IC SAR:
Gẹẹsi Eleyi yẹ ki o fi sori ẹrọ ati ṣiṣẹ pẹlu aaye to kere ju 20 cm laarin imooru ati ara rẹ.
Pataki: Iwọn otutu iṣiṣẹ ti EUT ko le kọja 85 ℃ ati pe ko yẹ ki o kere ju -40 ℃.
Nipa bayi, Arduino Srl n kede pe ọja yii wa ni ibamu pẹlu awọn ibeere pataki ati awọn ipese miiran ti o yẹ ti Itọsọna 2014/53/EU. Ọja yii gba laaye lati lo ni gbogbo awọn orilẹ-ede ọmọ ẹgbẹ EU.
Ile-iṣẹ Alaye
| Orukọ Ile-iṣẹ | Arduino SRL |
| Adirẹsi ile-iṣẹ | Nipasẹ Andrea Appiani, 25 – 20900 MOZA Italy) |
Iwe Itọkasi
| Ref | Ọna asopọ |
| Arduino IDE (Ojú-iṣẹ) | https://www.arduino.cc/en/Main/Software |
| Arduino IDE (awọsanma) | https://create.arduino.cc/editor |
| Awọsanma IDE Bibẹrẹ | https://docs.arduino.cc/cloud/web-editor/tutorials/getting-started/getting-started-web- editor |
| Ibudo ise agbese | https://create.arduino.cc/projecthub?by=part&part_id=11332&sort=trending |
| Itọkasi Ile-ikawe | https://github.com/arduino-libraries/ |
| Online itaja | https://store.arduino.cc/ |
Yi Wọle
| Ọjọ | Àtúnyẹwò | Awọn iyipada |
| 08/06/2023 | 1 | Itusilẹ akọkọ |
Arduino® UNO R4 WiFi Títúnṣe: 26/06/2023
Awọn iwe aṣẹ / Awọn orisun
 |
ARDUINO ABX00087 UNO R4 WiFi [pdf] Itọsọna olumulo ABX00087 UNO R4 WiFi, ABX00087, UNO R4 WiFi, R4 WiFi, WiFi |
 |
Arduino ABX00087 UNO R4 WiFi [pdf] Afowoyi olumulo ABX00087 UNO R4 WiFi, ABX00087, UNO R4 WiFi, R4 WiFi, WiFi |