Arduino® Nano RP2040 Sopọ
Ọja Reference Afowoyi
SKU: ABX00053
Apejuwe
Asopọmọra Arduino® Nano RP2040 ti o ni ẹya-ara mu Rasipibẹri Pi RP2040 microcontroller tuntun wa si ifosiwewe fọọmu Nano. Ṣe pupọ julọ ti meji-core 32-bit Arm® Cortex®-M0+ lati ṣe Intanẹẹti ti Awọn iṣẹ akanṣe pẹlu Bluetooth ati Wi-Fi Asopọmọra ọpẹ si module U-blox® Nina W102. Besomi sinu awọn iṣẹ akanṣe gidi-aye pẹlu ohun accelerometer ti inu, gyroscope, LED RGB, ati gbohungbohun. Dagbasoke awọn solusan AI ifibọ ti o lagbara pẹlu ipa diẹ ni lilo Arduino® Nano RP2040 Sopọ!
Awọn agbegbe ibi-afẹde
Intanẹẹti ti Awọn nkan (IoT), ẹkọ ẹrọ, ṣiṣe apẹẹrẹ,
Awọn ẹya ara ẹrọ
- Rasipibẹri Pi RP2040 Microcontroller
- 133MHz 32bit Meji mojuto Arm® Cortex®-M0 +
- 264kB on-eerun SRAM
- Direct Memory Access (DMA) adarí
- Atilẹyin fun to 16MB ti iranti Flash of-chip nipasẹ ọkọ akero QSPI igbẹhin
- USB 1.1 adarí ati PHY, pẹlu ogun ati ẹrọ support
- 8 PIO ipinle ero
- IO ti a ṣe eto (PIO) fun atilẹyin agbeegbe ti o gbooro sii
- 4 ikanni ADC pẹlu ti abẹnu otutu sensọ, 0.5 MSA / s, 12-bit iyipada
- N ṣatunṣe aṣiṣe SWD
- 2 lori-chip PLLs lati ṣe ina USB ati aago mojuto
- 40nm ilana ipade
- Atilẹyin ipo agbara kekere pupọ
- USB 1.1 Gbalejo / ẹrọ
- Ti abẹnu Voltage Regulator lati fi ranse awọn mojuto voltage
- Bọọsi Iṣẹ-giga to ti ni ilọsiwaju (AHB)/Ọkọ Agbeegbe To ti ni ilọsiwaju (APB)
- U-blox® Nina W102 Wi-Fi/Bluetooth Module
- 240MHz 32bit Meji mojuto Xtensa LX6
- 520kB on-eerun SRAM
- 448 Kbyte ROM fun bata ati awọn iṣẹ mojuto
- 16 Mbit FLASH fun ibi ipamọ koodu pẹlu fifi ẹnọ kọ nkan hardware lati daabobo awọn eto ati data
- 1 kbit EFUSE (iranti ti kii ṣe paarẹ) fun awọn adirẹsi MAC, iṣeto module, fifi ẹnọ kọ nkan Flash, ati
Chip-ID - IEEE 802.11b/g/n ẹyọ-band 2.4 GHz Wi-Fi iṣẹ
- Bluetooth 4.2
- Iṣọkan Planar Inverted-F Antenna (PIFA)
- 4x 12-bit ADC
- 3x I2C, SDIO, CAN, QSPI
- Iranti
- AT25SF128A 16MB TABI Flash
- Oṣuwọn gbigbe data QSPI to 532Mbps
- 100K eto / nu iyika
- ST LSM6DSOXTR 6-ipo IMU
- 3D Gyroscope
- ± 2 / ± 4 / ± 8 / ± 16 g ni kikun asekale
- 3D Accelerometer
- ±125/±250/±500/±1000/±2000 DPS ni kikun asekale
- Pedometer to ti ni ilọsiwaju, aṣawari igbesẹ, ati counter igbese
- Ṣiṣawari Iṣipopada pataki, Ṣiṣawari tẹ
- Awọn idilọwọ boṣewa: isubu ọfẹ, ji dide, iṣalaye 6D/4D, tẹ ati tẹ lẹẹmeji
- Ẹrọ ipinlẹ ti o le ṣe eto: accelerometer, gyroscope, ati awọn sensọ ita
- Machine mojuto
- Ifibọnu otutu sensọ
- ST MP34DT06JTR Gbohungbohun MEMS
- AOP = 122.5 dBSPL
- 64 dB ifihan agbara-si-ariwo ratio
- Omnidirectional ifamọ
- -26 dBFS ± 1 dB ifamọ
- RGB LED
- Wọpọ Anode
- Ti sopọ si U-blox® Nina W102 GPIO
- Microchip® ATECC608A Crypto
- Ajọ-isise cryptographic pẹlu Ibi ipamọ bọtini ti o da lori Hardware to ni aabo
- I2C, SWI
- Atilẹyin Hardware fun Awọn alugoridimu Symmetric:
- SHA-256 & HMAC Hash pẹlu pipa-chip ti o tọ fipamọ/pada sipo
- AES-128: Encrypt/Decrypt, Galois Field isodipupo fun GCM
- Didara Giga ti inu NIST SP 800-90A/B/C Agbekale Nọmba ID (RNG)
- Atilẹyin Boot to ni aabo:
- Ifọwọsi Ibuwọlu koodu ECDSA ni kikun, iyan ti o fipamọ lẹsẹsẹ / ibuwọlu
- Yiyan bọtini ibaraẹnisọrọ alaabo saju to ni aabo bata
- Ifọrọranṣẹ/Ijeri fun awọn ifiranṣẹ lati yago fun ikọlu inu ọkọ
- I/O
- 14x Digital Pin
- 8x Afọwọṣe Pin
- Micro USB
- UART, SPI, I2C Atilẹyin
- Agbara
- Buck Akobaratan-isalẹ oluyipada
- Alaye Aabo
- Kilasi A
Igbimọ naa
1.1 Ohun elo Examples
Arduino® Nano RP2040 Connect le ṣe deede si ọpọlọpọ awọn ọran lilo ọpẹ si microprocessor ti o lagbara, ibiti awọn sensọ inu ọkọ, ati ifosiwewe fọọmu Nano. Awọn ohun elo to ṣee ṣe pẹlu:
Iṣiro eti: Lo microprocessor Ramu ti o yara ati giga lati ṣiṣẹ TinyML fun wiwa anomaly, wiwa ikọ, itupalẹ afarajuwe, ati diẹ sii.
Awọn ẹrọ Wọ: Atẹgun Nano kekere ti n pese aye lati pese ikẹkọ ẹrọ si ọpọlọpọ awọn ẹrọ ti o wọ pẹlu awọn olutọpa ere idaraya ati awọn olutona VR.
Oluranlọwọ ohun: Arduino® Nano RP2040 Asopọ pẹlu gbohungbohun omnidirectional ti o le ṣe bi oluranlọwọ oni nọmba ti ara ẹni ati mu iṣakoso ohun ṣiṣẹ fun awọn iṣẹ akanṣe rẹ.
1.2 Awọn ẹya ẹrọ
- Okun USB Micro
- 15-pin 2.54mm akọ afori
- 15-pin 2.54mm stackable afori
1.3 jẹmọ awọn ọja
- Walẹ: Nano I/O Shield
Awọn iwontun-wonsi
2.1 Niyanju Awọn ipo iṣẹ
| Aami | Apejuwe | Min | Iru | O pọju | Ẹyọ |
| VIN | Iwọn titẹ siitage lati VIN paadi | 4 | 5 | 20 | V |
| VUSI | Iwọn titẹ siitage lati USB asopo | 4.75 | 5 | 5.25 | V |
| V3V3 | 3.3V o wu si olumulo ohun elo | 3.25 | 3.3 | 3.35 | V |
| I3V3 | 3.3V ti njade lọwọlọwọ (pẹlu IC inu ọkọ) | – | – | 800 | mA |
| VIA | Input ga-ipele voltage | 2.31 | – | 3.3 | V |
| VIL | Input kekere-ipele voltage | 0 | – | 0.99 | V |
| si Max | Lọwọlọwọ ni VDD-0.4 V, iṣelọpọ ti ṣeto ga | 8 | mA | ||
| 10L ti o pọju | Lọwọlọwọ ni VSS+0.4 V, iṣelọpọ ti ṣeto kekere | 8 | mA | ||
| VEOH | Ijade giga voltage,8mA | 2.7 | – | 3.3 | V |
| VOL | Ijade kekere voltage,8mA | 0 | – | 0.4 | V |
| Oke | Awọn iwọn otutu ti nṣiṣẹ | -20 | – | 80 | °C |
2.2 Agbara agbara
| Aami | Apejuwe | Min | Iru | O pọju | Ẹyọ |
| PBS | Lilo agbara pẹlu lupu nšišẹ | TBC | mW | ||
| PLP | Lilo agbara ni ipo agbara kekere | TBC | mW | ||
| PMAX | O pọju agbara agbara | TBC | mW |
Ti pari iṣẹ -ṣiṣeview
3.1 Àkọsílẹ aworan atọka
3.2 Board Topology
Iwaju View
| Ref. | Apejuwe | Ref. | Apejuwe |
| U1 | Rasipibẹri PI RP2040 Microcontroller | U2 | Ublox NINA-W102-00B WI-FI/Bluetooth Module |
| U3 | N/A | U4 | ATECC608A-MAHDA-T Crypto IC |
| U5 | AT25SF128A-MHB-T 16MB Filasi IC | U6 | MP2322GQH Igbesẹ-isalẹ Buck eleto |
| U7 | DSC6111HI213-012.0000 MEMS Oscillator | U8 | MP34DTO6JTR MEMS Omnidirectional Gbohungbohun IC |
| U9 | LSM6DSOXTR 6-axis IMU pẹlu Machine Learning Core | J1 | Okunrin Micro USB Asopọ |
| DL1 | Green Power On LED | DL2 | Wuiltin Orange LED |
| DL3 | RGB wọpọ Anode LED | PB1 | Bọtini atunto |
| JP2 | Afọwọṣe Pin + D13 Pinni | JP3 | Digital Pinni |
Pada View
| Ref. | Apejuwe | Ref. | Apejuwe |
| SJ4 | 3.3V jumper (ti sopọ) | SJ1 | VUSB jumper (ti ge asopọ) |
3.3 isise
Awọn ero isise naa da lori ohun alumọni Rasipibẹri Pi RP2040 tuntun (U1). Microcontroller yii n pese awọn aye fun idagbasoke Intanẹẹti ti Awọn nkan (IoT) agbara kekere ati kikọ ẹkọ ẹrọ. Meji symmetrical Arm® Cortex®-M0+ clocked ni 133MHz pese agbara iširo fun kikọ ẹrọ ti a fi sii ati sisẹ ni afiwe pẹlu agbara kekere. Awọn banki ominira mẹfa ti 264 KB SRAM ati 2MB ti pese. Wiwọle iranti taara n pese isọpọ iyara laarin awọn ero isise ati iranti ti o le ṣe aiṣiṣẹ pẹlu mojuto lati tẹ ipo oorun. Serial waya yokokoro (SWD) wa lati bata nipasẹ awọn paadi labẹ awọn ọkọ.
RP2040 nṣiṣẹ ni 3.3V ati pe o ni vol ti inutage olutọsọna pese 1.1V. RP2040 n ṣakoso awọn agbeegbe ati awọn pinni oni-nọmba, bakanna bi awọn pinni afọwọṣe (A0-A3). Awọn asopọ I2C lori awọn pinni A4 (SDA) ati A5 (SCL) ni a lo fun sisopọ si awọn agbeegbe inu ọkọ ati pe a fa soke pẹlu 4.7 kΩ resistor. Laini aago SWD (SWCLK) ati atunto jẹ tun fa soke pẹlu alatako 4.7 kΩ kan. Oscillator MEMS ita (U7) ti o nṣiṣẹ ni 12MHz n pese pulse aago. Eto IO ṣe iranlọwọ fun imuse ilana ilana ibaraẹnisọrọ lainidii pẹlu ẹru kekere lori awọn ohun kohun sisẹ akọkọ. Ni wiwo ẹrọ USB 1.1 ti wa ni imuse lori RP2040 fun ikojọpọ koodu.
3.4 Wi-Fi/Bluetooth Asopọmọra
Wi-Fi ati Asopọmọra Bluetooth ti pese nipasẹ module Nina W102 (U2). RP2040 nikan ni awọn pinni afọwọṣe 4, ati pe Nina ni a lo lati faagun iyẹn si mẹjọ ni kikun bi o ṣe jẹ boṣewa ni ifosiwewe fọọmu Arduino Nano pẹlu awọn igbewọle analog 4 12-bit miiran (A4-A7). Ni afikun, anode RGB LED ti o wọpọ tun jẹ iṣakoso nipasẹ module Nina W-102 bii LED wa ni pipa nigbati ipo oni-nọmba ba ga ati titan nigbati ipo oni-nọmba ba LOW. Awọn ti abẹnu PCB eriali ninu awọn module ti jade ni nilo fun ohun ita eriali. Nina W102 module tun pẹlu kan meji-mojuto Xtensa LX6 Sipiyu ti o le tun ti wa ni siseto ominira ti RP2040 nipasẹ awọn paadi labẹ awọn ọkọ lilo SWD.
3.5 6-Axis IMU
O ṣee ṣe lati gba gyroscope 3D ati data accelerometer 3D lati LSM6DSOX 6-axis IMU (U9). Ni afikun si ipese iru data, o tun ṣee ṣe lati ṣe ikẹkọ ẹrọ lori IMU fun wiwa idari.
3.6 Ita Memory
RP2040 (U1) ni iraye si afikun 16 MB ti iranti filasi nipasẹ wiwo QSPI kan. Ẹya ṣiṣe-ni-ibi (XIP) ti RP2040 ngbanilaaye iranti filaṣi ita lati koju ati wọle nipasẹ eto bi ẹnipe o jẹ iranti inu, laisi didakọ koodu akọkọ si iranti inu.
3.7 cryptography
ATECC608A Cryptographic IC (U4) pese awọn agbara bata to ni aabo lẹgbẹẹ SHA ati AES-128 fifi ẹnọ kọ nkan / atilẹyin decryption fun aabo ni Ile Smart ati Awọn ohun elo IoT (IIoT). Ni afikun, olupilẹṣẹ nọmba ID tun wa fun lilo nipasẹ RP2040.
3.8 Gbohungbohun
Gbohungbohun MP34DT06J ti sopọ nipasẹ wiwo PDM si RP2040. Gbohungbohun MEMS oni-nọmba jẹ itọsọna gbogbo ati ṣiṣiṣẹ nipasẹ ipin oye agbara pẹlu ipin ifihan-si-ariwo giga kan (64 dB). Ohun elo ti o ni oye, ti o lagbara lati ṣe awari awọn igbi omi akositiki, jẹ iṣelọpọ nipa lilo ilana micromachining silikoni amọja ti a ṣe igbẹhin si iṣelọpọ awọn sensọ ohun.
3.9 RGB LED
RGB LED (DL3) ni a wọpọ anode LED ti o ti wa ni ti sopọ si Nina W102 module. Awọn LED wa ni pipa nigbati ipo oni-nọmba ba ga ati titan nigbati ipo oni-nọmba jẹ LOW.
3.10 Igi agbara
Arduino Nano RP2040 Asopọ le jẹ agbara nipasẹ boya Micro USB ibudo (J1) tabi ni omiiran nipasẹ VIN lori JP2. Oluyipada ẹtu inu ọkọ n pese 3V3 si microcontroller RP2040 ati gbogbo awọn agbeegbe miiran. Ni afikun, RP2040 tun ni olutọsọna 1V8 inu.
Board Isẹ
4.1 Bibẹrẹ - IDE
Ti o ba fẹ ṣe eto Arduino® Nano RP2040 Connect lakoko ti o wa ni ita o nilo lati fi Arduino® IDE Desktop [1] sori ẹrọ Lati so iṣakoso Arduino® Edge pọ mọ kọnputa rẹ, iwọ yoo nilo okun USB micro. Eyi tun pese agbara si igbimọ, bi a ti fihan nipasẹ LED.
4.2 Bibẹrẹ - Arduino Web Olootu
Gbogbo awọn igbimọ Arduino®, pẹlu ọkan yii, ṣiṣẹ ni ita-apoti lori Arduino® Web Olootu [2], nipa fifi sori ẹrọ ti o rọrun. Arduino® naa Web Olootu ti gbalejo lori ayelujara, nitorinaa yoo ma jẹ imudojuiwọn nigbagbogbo pẹlu awọn ẹya tuntun ati atilẹyin fun gbogbo awọn igbimọ. Tẹle [3] lati bẹrẹ ifaminsi lori ẹrọ aṣawakiri ati gbejade awọn aworan afọwọya rẹ sori igbimọ rẹ.
4.3 Bibẹrẹ - Arduino IoT awọsanma
Gbogbo awọn ọja Arduino® IoT ti n ṣiṣẹ ni atilẹyin lori Arduino®'s IoT Cloud eyiti o fun ọ laaye lati Wọle, yaya, ati itupalẹ data sensọ, awọn iṣẹlẹ nfa, ati adaṣe adaṣe ile tabi iṣowo rẹ.
Ọdun 4.4 Sample Sketches
SampAwọn aworan afọwọya fun Arduino® Nano RP2040 Asopọ le ṣee rii boya ninu “Examples” akojọ ni Arduino® IDE tabi ni apakan “Iwe” ti Arduino webojula [4]
4.5 Online Resources
Ni bayi ti o ti lọ nipasẹ awọn ipilẹ ti ohun ti o le ṣe pẹlu igbimọ o le ṣawari awọn aye ailopin ti o pese nipa ṣiṣe ayẹwo awọn iṣẹ akanṣe lori ProjectHub [5], Arduino® Library Reference [6], ati ile itaja ori ayelujara [7] nibi ti o ti yoo ni anfani lati iranlowo rẹ ọkọ pẹlu sensosi, actuators ati siwaju sii.
4.6 Board Gbigba
Gbogbo awọn igbimọ Arduino ni bootloader ti a ṣe sinu eyiti o fun laaye lati tan igbimọ nipasẹ USB. Ni ọran ti aworan afọwọya kan ti pa ero isise naa ati igbimọ naa ko le de ọdọ mọ nipasẹ USB o ṣee ṣe lati tẹ ipo bootloader sii nipa titẹ ni ilopo-bọtini atunto ni kete lẹhin agbara-soke.
Asopọ Pinouts
5.1 J1 Micro USB
| Pin | Iṣẹ = | Iru | Apejuwe |
| 1 | V-BUS | Agbara | 5V agbara USB |
| 2 | D- | Iyatọ | data iyatọ USB - |
| 3 | D+ | Iyatọ | USB iyato data + |
| 4 | ID | Oni-nọmba | Ti ko lo |
| 5 | GND | Agbara | Ilẹ |
5.2 JP1
| Pin | Išẹ | Iru | Apejuwe |
| 1 | TX1 | Oni-nọmba | UART TX / Pin oni nọmba 1 |
| 2 | RX0 | Oni-nọmba | UART RX / Digital Pin 0 |
| 3 | RST | Oni-nọmba | Tunto |
| 4 | GND | Agbara | Ilẹ |
| 5 | D2 | Oni-nọmba | Pin oni nọmba 2 |
| 6 | D3 | Oni-nọmba | Pin oni nọmba 3 |
| 7 | D4 | Oni-nọmba | Pin oni nọmba 4 |
| 8 | D5 | Oni-nọmba | Pin oni nọmba 5 |
| 9 | D6 | Oni-nọmba | Pin oni nọmba 6 |
| 10 | D7 | Oni-nọmba | Pin oni nọmba 7 |
| 11 | D8 | Oni-nọmba | Pin oni nọmba 8 |
| 12 | D9 | Oni-nọmba | Pin oni nọmba 9 |
| 13 | D10 | Oni-nọmba | Pin oni nọmba 10 |
| 14 | D11 | Oni-nọmba | Pin oni nọmba 11 |
| 15 | D12 | Oni-nọmba | Pin oni nọmba 12 |
5.3 JP2
| Pin | Išẹ | Iru | Apejuwe |
| 1 | D13 | Oni-nọmba | Pin oni nọmba 13 |
| 2 | 3.3V | Agbara | 3.3V Agbara |
| 3 | REF | Analog | NC |
| 4 | AO | Analog | Pin afọwọṣe 0 |
| 5 | Al | Analog | Pin afọwọṣe 1 |
| 6 | A2 | Analog | Pin afọwọṣe 2 |
| 7 | A3 | Analog | Pin afọwọṣe 3 |
| 8 | A4 | Analog | Pin afọwọṣe 4 |
| 9 | A5 | Analog | Pin afọwọṣe 5 |
| 10 | A6 | Analog | Pin afọwọṣe 6 |
| 11 | A7 | Analog | Pin afọwọṣe 7 |
| 12 | VUSI | Agbara | USB Input Voltage |
| 13 | REC | Oni-nọmba | BẸTẸ |
| 14 | GND | Agbara | Ilẹ |
| 15 | VIN | Agbara | Voltage Input |
Akiyesi: Afọwọṣe itọkasi voltagti wa ni iwọn +3.3V. A0-A3 ti sopọ si RP2040's ADC. A4-A7 ti sopọ si Nina W102 ADC. Ni afikun, A4 ati A5 jẹ pinpin pẹlu ọkọ akero I2C ti RP2040 ati pe ọkọọkan wọn fa soke pẹlu awọn alatako 4.7 KΩ.
5.4 RP2040 SWD paadi
| Pin | Išẹ | -Awa | Apejuwe |
| 1 | STUDIO | Oni-nọmba | SWD Data Line |
| 2 | GND | Oni-nọmba | Ilẹ |
| 3 | SWCLK | Oni-nọmba | Aago SWD |
| 4 | + 3V3 | Oni-nọmba | + 3V3 Agbara Rail |
| 5 | TP_RESETN | Oni-nọmba | Tunto |
5.5 Nina W102 SWD paadi
| pinni | Iṣẹ A | Iru | Apejuwe |
| 1 | TP_RST | Oni-nọmba | Tunto |
| 2 | TP RX | Oni-nọmba | Tẹlentẹle Rx |
| 3 | TP_TX | Oni-nọmba | Tẹlentẹle Tx |
| 4 | TP_GP100 | Oni-nọmba | GP100 |
Darí Information
Awọn iwe-ẹri
7.1 Ikede ibamu CE DoC (EU)
A n kede labẹ ojuse wa nikan pe awọn ọja ti o wa loke wa ni ibamu pẹlu awọn ibeere pataki ti Awọn itọsọna EU atẹle ati nitorinaa yẹ fun gbigbe ọfẹ laarin awọn ọja ti o ni European Union (EU) ati European Economic Area (EEA).
7.2 Ikede Ibamu si EU RoHS & REACH 211 01/19/2021
Awọn igbimọ Arduino wa ni ibamu pẹlu Ilana RoHS 2 2011/65/EU ti Ile-igbimọ European ati Ilana RoHS 3 2015/863/EU ti Igbimọ ti 4 Okudu 2015 lori ihamọ lilo awọn nkan eewu kan ninu itanna ati ẹrọ itanna.
| Ohun elo | O pọju (ppm) |
| Asiwaju | 1000 |
| Cadmium (CD) | 100 |
| Makiuri (Hg) | 1000 |
| Chromium Hexavalent (Cr6+) | 1000 |
| Poly Brominated Biphenyls (PBB) | 1000 |
| Poly Brominated Diphenyl ethers (PBDE) | 1000 |
| Bis (2-Ethylhexyl) phthalate (DEHP) | 1000 |
| Benzyl butyl phthalate (BBP) | 1000 |
| Dibutyl phthalate (DBP) | 1000 |
| Dilsobutyl phthalate (DIBP) | 1000 |
Awọn imukuro: Ko si awọn imukuro ti a beere.
Awọn igbimọ Arduino ni ibamu ni kikun pẹlu awọn ibeere ti o jọmọ ti Ilana European Union (EC) 1907 / 2006 nipa Iforukọsilẹ, Igbelewọn, Aṣẹ, ati Ihamọ Awọn Kemikali (DE). A ko kede ọkan ninu awọn SVHC (https://echa.europa.eu/web/guest/candidate-list-table), Akojọ Oludije ti Awọn nkan ti Ibakcdun Giga Gidigidi fun aṣẹ lọwọlọwọ ti a tu silẹ nipasẹ ECHA Wa ni gbogbo awọn ọja (ati tun awọn idii) ni awọn iwọn lapapọ ni ifọkansi dogba tabi loke 0.1%. Ti o dara julọ ti imọ wa, a tun kede pe awọn ọja wa ko ni eyikeyi awọn nkan ti a ṣe akojọ lori “Atokọ Aṣẹ” (Annex XIV ti awọn ilana REACH) ati Awọn nkan ti aibalẹ pupọ (SVHC) ni eyikeyi awọn iye pataki bi pato nipasẹ Annex XVII ti Akojọ Kemikali ti EC1907 (Euro 2006) /XNUMX/EC.
7.3 Awọn ohun alumọni Rogbodiyan Declaration
Gẹgẹbi olutaja agbaye ti itanna ati awọn paati itanna, Arduino mọ awọn adehun wa pẹlu iyi si awọn ofin ati ilana nipa Awọn ohun alumọni Rogbodiyan, ni pataki Dodd-Frank Wall Street Reform ati Ofin Idaabobo Olumulo, Abala 1502. Arduino ko ni orisun taara tabi ilana ariyanjiyan. ohun alumọni bi Tin, Tantalum, Tungsten, tabi Gold. Awọn ohun alumọni rogbodiyan wa ninu awọn ọja wa ni irisi tita, tabi bi paati ninu awọn ohun elo irin. Gẹgẹbi apakan ti aisimi ti oye wa, Arduino ti kan si awọn olupese paati laarin pq ipese wa lati rii daju pe wọn tẹsiwaju ibamu pẹlu awọn ilana. Da lori alaye ti o gba titi di isisiyi a n kede pe awọn ọja wa ni Awọn ohun alumọni Rogbodiyan ti o wa lati awọn agbegbe ti ko ni ariyanjiyan.
7.4 FCC Išọra
Eyikeyi awọn iyipada tabi awọn atunṣe ti ko fọwọsi ni gbangba nipasẹ ẹgbẹ ti o ni iduro fun ibamu le sọ aṣẹ olumulo di ofo lati ṣiṣẹ ohun elo naa.
Ẹrọ yii ni ibamu pẹlu apakan 15 ti Awọn ofin FCC. Iṣiṣẹ jẹ koko-ọrọ si awọn ipo meji wọnyi:
- Ẹrọ yii le ma fa kikọlu ipalara
- Ẹrọ yii gbọdọ gba kikọlu eyikeyi ti o gba, pẹlu kikọlu ti o le fa iṣẹ ti ko fẹ.
Gbólóhùn Ifihan Radiation FCC RF:
- Atagba yii ko gbọdọ wa ni ipo tabi ṣiṣẹ ni apapo pẹlu eyikeyi eriali miiran tabi atagba.
- Ohun elo yii ni ibamu pẹlu awọn opin ifihan itankalẹ RF ti a ṣeto fun agbegbe ti a ko ṣakoso.
- Ohun elo yii yẹ ki o fi sori ẹrọ ati ṣiṣẹ pẹlu aaye to kere ju ti 20cm laarin imooru & ara rẹ.
Awọn iwe afọwọkọ olumulo fun ohun elo redio ti ko ni iwe-aṣẹ yoo ni atẹle tabi akiyesi deede ni ipo ti o han gbangba ninu iwe afọwọkọ olumulo tabi ni omiiran lori ẹrọ tabi mejeeji. Ẹrọ yii ni ibamu pẹlu iwe-aṣẹ ile-iṣẹ Canada-alayokuro(awọn) RSS. Iṣiṣẹ jẹ koko-ọrọ si awọn ipo meji wọnyi:
- ẹrọ yi le ma fa kikọlu
- Ẹrọ yii gbọdọ gba kikọlu eyikeyi, pẹlu kikọlu ti o le fa iṣẹ ti a ko fẹ fun ẹrọ naa.
Ikilọ IC SAR:
Ohun elo yii yẹ ki o fi sori ẹrọ ati ṣiṣẹ pẹlu aaye to kere ju 20 cm laarin imooru ati ara rẹ.
Pataki: Iwọn otutu iṣiṣẹ ti EUT ko le kọja 85 ℃ ati pe ko yẹ ki o kere ju -40℃. Nipa bayi, Arduino Srl n kede pe ọja yii wa ni ibamu pẹlu awọn ibeere pataki ati awọn ipese miiran ti o yẹ ti Itọsọna 201453/EU. Ọja yii gba laaye lati lo ni gbogbo awọn orilẹ-ede ọmọ ẹgbẹ EU.
| Awọn ẹgbẹ igbohunsafẹfẹ | Agbara iṣelọpọ ti o pọju (ERP) |
| 2400-2483.5 Mhz | 17 dBm |
Ile-iṣẹ Alaye
| Orukọ Ile-iṣẹ | Arduino Srl |
| Adirẹsi ile-iṣẹ | Nipasẹ Ferruccio Pelli 14, 6900 Lugano, TI (Ticino), Switzerland |
Iwe Itọkasi
| Ref | Ọna asopọ |
| Arduino IDE (Ojú-iṣẹ) | https://www.ardulno.cc/en/Main/Software |
| Arduino IDE (awọsanma) | https://create.arduino.cc/editor |
| Awọsanma IDE Bibẹrẹ | https://create.arduino.cc/projecthub/Arduino_Genuino/getting-started-withardulno-web-editor-4b3e4a |
| Arduino Webojula | https://www.ardulno.cc/ |
| Ibudo ise agbese | https://create.arduino.cc/projecthub?by=part&part_id=11332&sort=trending |
| PDM (gbohungbohun) Library | https://www.ardulno.cc/en/Reference/PDM |
| WIFININA (WI-FI, W102) Library | https://www.ardulno.cc/en/Reference/WIFININA |
| ArduinoBLE (Bluetooth, W102) Library | https://www.ardulno.cc/en/Reference/ArduinoBLE |
| IMU Library | https://www.ardulno.cc/en/Reference/Arduino_LSM6DS3 |
| Online itaja | https://store.ardulno.cc/ |
Àtúnyẹwò History
| Ọjọ | Àtúnyẹwò | Awọn iyipada |
| 14/05/2020 | 1 | Itusilẹ akọkọ |
20 / 20
Arduino® Nano RP2040 Sopọ
Atunṣe: 21/12/2021
Awọn iwe aṣẹ / Awọn orisun
 |
ARDUINI ABX00053 Sopọ pẹlu akọsori [pdf] Afowoyi olumulo ABX00053 Sopọ pẹlu akọsori, ABX00053, Sopọ pẹlu akọsori |
