HAFH-RF Aimi Fixed Giga Pada fireemu
“
Awọn pato:
- Product Name: Halo Static Return Frame
- Model Variants: HAFH-RF, HAFH-SF
- Awọn eroja To wa:
- Table feet x1
- Àwọ̀n x1
- Bolt: M6x12 x2
- Screw: ST4x20 x13
- Side brackets x1
- Rubber pad x10
- Top frame-1 x1
- Bolt: M6x10 x3
- Centre bracket x1
- Center rails x2
- Top frame-2 x1
- Hand bolts M6x10 x2
- Allen Wrench(4mm) x1
- Allen Wrench(5mm) x1
- Okun tai x2
Awọn ilana Lilo ọja:
Awọn Itọsọna Apejọ:
Igbesẹ 1: Loose awọn boluti ti a ti fi sori ẹrọ tẹlẹ ati
satunṣe awọn ipari ti awọn oke fireemu lati baramu awọn iwọn ti awọn tabili
oke.
Igbesẹ 2: Insert the Column into the top frame
and fix it with 4 screws M6x12.
Igbesẹ 3: Place the table feet on the column,
align, and tighten the bolt.
Igbesẹ 4: Place the side bracket on the top frame
ki o si Mu awọn boluti.
Igbesẹ 5: So fireemu pada si ẹyọkan
workstation, fix it with 2 hand bolts, and fix the center brackets
pẹlu skru M6x10.
Igbesẹ 6: Oke awọn tabletop ati ki o fix o pẹlu
skru ST4x20. Fix aarin akọmọ pẹlu skru M6x10.
Fifi sori ẹrọ atẹ USB:
Igbesẹ 1: Fix the cable tray to the cable tray
arms with screws M6x10.
Igbesẹ 2: Fi sori ẹrọ awọn biraketi U si tabili
frame with screws M8x10. Mount the cable tray to the desk frame and
fix it with screws M6x10.
Fifi sori Panel Iboju (Iboju Aṣiri Shush30):
Igbesẹ 1: Fi awọn awo ti a tẹ si iboju
nronu.
Igbesẹ 2: Fi sori ẹrọ awọn biraketi iboju si awọn
Shush30 Extrusion pẹlu skru M5x6.
Igbesẹ 3: Ṣe atunṣe awọn biraketi iboju si tabili
fireemu pẹlu skru M6x10.
Eco Panel Screen Panel Installation:
Igbesẹ 1: Fi sori ẹrọ awọn biraketi iboju lori awọn
USB atẹ apa pẹlu skru M6x10.
Igbesẹ 2: Gbe EPS nronu loju iboju
biraketi ati oluso lilo ni ilopo-pari boluti M5 * 32mm nipasẹ awọn
iho da ni Eco Panel iboju.
Awọn Ibeere Nigbagbogbo (FAQ):
Q: How many components are included in the Halo Static Return
Férémù?
A: The Halo Static Return Frame includes various components such
as table feet, columns, bolts, screws, side brackets, rubber pads,
top frames, hand bolts, Allen wrenches, and cable ties.
Q: How do I install the cable tray on the desk frame?
A: To install the cable tray, first fix it to the cable tray
arms using provided screws M6x10. Then, attach U brackets to the
desk frame with screws M8x10 and mount the cable tray, securing it
pẹlu skru M6x10.
Q: What is required for installing the Eco Panel Screen?
A: Installing the Eco Panel Screen requires screen brackets,
double-ended bolts, a drill bit (not included), and a suitable
Allen key for tightening.
“`
Halo Static Return Frame Instruction Manual
Halo Static Fixed Height Return Frame (HAFH-RF)
Halo Static Single Sided Fixed Height Workstation Frame (HAFH-SF)
1
Awọn ẹya ara ẹrọ
RARA. Orukọ paati
PCS
RARA. Orukọ paati
PCS
1
Awọn ẹsẹ tabili
1
9
Aarin akọmọ
1
2
Àwọ̀n
1
10 Center afowodimu
2
3
Ọkọ: M6x12
2
11 Top fireemu-2
1
4
Dabaru: ST4x20
13
12 Ọwọ boluti M6x10
2
5
Awọn biraketi ẹgbẹ
1
13 Allen Wrench(4mm)
1
6
Roba paadi
10
14 Allen Wrench(5mm)
1
7
Oke fireemu-1
1
15 Okun tai
2
8
Ọkọ: M6x10
3
2
Awọn ilana Apejọ
Igbesẹ 1 Tu awọn boluti ti a ti fi sii tẹlẹ ki o Ṣatunṣe ipari ti fireemu oke lati baamu iwọn ti oke tabili.
Step 2 Inset the Column to the top frame,fix column with 4pcs screws M6x12 like.
3
Igbesẹ 3
Place the table feet on the column and rotate it and make it align, then tighten the pre-installed bolt.
Igbesẹ 4 Gbe akọmọ ẹgbẹ si ori fireemu oke ki o di awọn boluti naa.
4
Igbesẹ 5 So fireemu ipadabọ pọ si ibi iṣẹ ẹyọkan ati ti o wa titi pẹlu awọn boluti ọwọ 2. Ṣe atunṣe awọn biraketi aarin pẹlu awọn skru 2pcs M6x10.
Igbesẹ 6 Gbe tabili tabili naa ki o ṣe atunṣe pẹlu awọn skru 24 pcs ST4x20; Ṣe atunṣe akọmọ aarin pẹlu awọn skru pcs 2 M6x10
5
Cable tray installation Step 1 – Fix the cable tray(B2-SSCT ) to the cable tray arms(HP-SSARM) with 8 pcs M6x10 screws.
Igbesẹ 2 - Fi sori ẹrọ awọn biraketi U si fireemu tabili pẹlu awọn skru 4 PC M8x10. - Gbe atẹ okun naa si fireemu tabili ki o ṣatunṣe pẹlu awọn skru 6 pcs M6x10
6
Fifi sori ẹrọ nronu iboju (Iboju Aṣiri Shush30) Igbesẹ 1 - Fi awọn awo ti a tẹ sii si nronu iboju (awọn awo le rii ni paali B2-SBRAC)
Igbesẹ 2 - Fi sori ẹrọ awọn biraketi iboju (B2-SBRAC) si Shush30 Extrusion pẹlu 8 pcs M5x6 skru.
7
Igbesẹ 3 - Ṣe atunṣe awọn biraketi iboju (B2-SBRAC) si fireemu tabili pẹlu 10 PC M6x10 skru.
8
EPS (900mm H Eco Panel) Fifi sori ẹrọ igbimọ iboju Igbese 1 - Fi sori ẹrọ awọn biraketi iboju (B2-SBRAC) lori apa atẹ okun (B2-SSARM) pẹlu PCS M10x6 10 PCS
Itọsọna biraketi bi ifihan awọn fọto.
Igbese 2 - Gbe awọn EPS nronu lori awọn biraketi iboju Lilo 6mm lu bit (ko si pẹlu ), lu jade ihò ninu Eco Panel Iboju ni ila pẹlu pada si pada iboju biraketi ihò (Akiyesi: Carbide Drill Bits Work Best For PET panel) - Gbe 8 x Double End Bolts M5 * 32mm - 6mm nipasẹ The iboju akọmọ (B2-S) iho ti o ti ṣẹda. Mu boluti ti o pari meji pọ pẹlu bọtini Allen.
9
Awọn iwe aṣẹ / Awọn orisun
 |
HALO HAFH-RF Static Fixed Height Return Frame [pdf] Ilana itọnisọna HAFH-RF, HAFH-RF Static Fixed Height Return Frame, Static Fixed Height Return Frame, Fixed Height Return Frame, Height Return Frame |