HAFH-RF Static Fixed Height Return Frame
“
Litlhaloso:
- Product Name: Halo Static Return Frame
- Model Variants: HAFH-RF, HAFH-SF
- Likarolo tse kenyelelitsoeng:
- Tafole maoto x1
- Kholomo x1
- Bolt: M6x12 x2
- Screw: ST4x20 x13
- Masakana a mahlakoreng x1
- Letlapa la rabara x10
- Foreimi e ka holimo-1 x1
- Bolt: M6x10 x3
- Borakete e bohareng x1
- Liporo tsa bohareng x2
- Foreimi e ka holimo-2 x1
- Liboutu tsa letsoho M6x10 x2
- Allen Wrench(4mm) x1
- Allen Wrench(5mm) x1
- Tlamo ea thapo x2
Litaelo tsa Tšebeliso ea Sehlahisoa:
Litaelo tsa Kopano:
Mohato oa 1: Lokolla liboutu tse kentsoeng pele le
lokisa bolelele ba foreimi e ka hodimo hore e tsamaellane le boholo ba tafole
holimo.
Mohato oa 2: Insert the Column into the top frame
and fix it with 4 screws M6x12.
Mohato oa 3: Place the table feet on the column,
align, and tighten the bolt.
Mohato oa 4: Place the side bracket on the top frame
le ho tiisa liboutu.
Mohato oa 5: Connect the return frame to the single
workstation, fix it with 2 hand bolts, and fix the center brackets
ka likurufu M6x10.
Mohato oa 6: Mount the tabletop and fix it with
screws ST4x20. Fix the center bracket with screws M6x10.
Kemiso ea Terei ea Cable:
Mohato oa 1: Fix the cable tray to the cable tray
arms with screws M6x10.
Mohato oa 2: Kenya li-brackets tsa U tafoleng
frame with screws M8x10. Mount the cable tray to the desk frame and
fix it with screws M6x10.
Kenyelletso ea Panel ea Screen (Skrine sa Lekunutu sa Shush30):
Mohato oa 1: Kenya lipoleiti tse tiisitsoeng skrineng
phanele.
Mohato oa 2: Install the screen brackets to the
Shush30 Extrusion with screws M5x6.
Mohato oa 3: Fix the screen brackets to the desk
frame with screws M6x10.
Kenyelletso ea Eco Panel Screen Panel:
Mohato oa 1: Install the screen brackets on the
cable tray arm with screws M6x10.
Mohato oa 2: Beha karolo ea EPS skrineng
brackets and secure using double-ended bolts M5*32mm through the
holes created in the Eco Panel Screen.
Lipotso Tse Botsoang Khafetsa (FAQ):
Q: How many components are included in the Halo Static Return
Frame?
A: The Halo Static Return Frame includes various components such
as table feet, columns, bolts, screws, side brackets, rubber pads,
top frames, hand bolts, Allen wrenches, and cable ties.
Q: How do I install the cable tray on the desk frame?
A: To install the cable tray, first fix it to the cable tray
arms using provided screws M6x10. Then, attach U brackets to the
desk frame with screws M8x10 and mount the cable tray, securing it
ka likurufu M6x10.
Q: What is required for installing the Eco Panel Screen?
A: Installing the Eco Panel Screen requires screen brackets,
double-ended bolts, a drill bit (not included), and a suitable
Allen key for tightening.
"`
Halo Static Return Frame Instruction Manual
Halo Static Fixed Height Return Frame (HAFH-RF)
Halo Static Single Sided Fixed Height Workstation Frame (HAFH-SF)
1
Likarolo tsa likarolo
NO. Lebitso la Karolo
PCS
NO. Lebitso la Karolo
PCS
1
Tafole maoto
1
9
Bracket e bohareng
1
2
Kholomo
1
10 Center rails
2
3
Bolt: M6x12
2
11 Foreimi e ka holimo-2
1
4
Setšoantšo: ST4x20
13
12 Hand bolts M6x10
2
5
Masakana a mahlakoreng
1
13 Allen Wrench(4mm)
1
6
Moqomo oa Rubber
10
14 Allen Wrench(5mm)
1
7
Foreimi e ka holimo-1
1
15 Thae ea cable
2
8
Bolt: M6x10
3
2
Litaelo tsa Kopano
Mohato oa 1 Lokolla liboutu tse kentsoeng pele 'me U lokise bolelele ba foreimi e ka holimo ho tsamaisana le boholo ba tafole.
Step 2 Inset the Column to the top frame,fix column with 4pcs screws M6x12 like.
3
Mohato oa 3
Beha maoto a tafole holim'a kholomo ebe u e potoloha ebe u e etsa hore e lumellane, ebe u tiisa bolt e kentsoeng pele.
Mohato oa 4 Beha bracket e lehlakoreng holim'a foreimi e ka holimo 'me u tiise liboutu.
4
Step 5 Connect the return frame to the single workstation and fixed with 2 hand bolts. Fix the centre brackets with 2pcs screws M6x10.
Step 6 Mount the tabletop and fix it with24 pcs screws ST4x20; Fix the centre bracket with 2 pcs screws M6x10
5
Cable tray installation Step 1 – Fix the cable tray(B2-SSCT ) to the cable tray arms(HP-SSARM) with 8 pcs M6x10 screws.
Mohato oa 2 - Kenya li-brackets tsa U ho foreime ea deske ka li-screw tse 4 tsa M8x10. - Beha terei ea thapo ho foreime ea deske ebe u e lokisa ka li-screws tse 6 tsa M6x10
6
Ho kenya liphanele tsa skrine ( Skrine ea Lekunutu ea Shush30 ) Mohato oa 1 - Kenya lipoleiti tse kentsoeng skrineng (lipoleiti li ka fumanoa ka lebokoseng la B2-SBRAC)
Mohato oa 2 - Kenya li-brackets tsa skrine ( B2-SBRAC ) ho Shush30 Extrusion ka li-screw tse 8 tsa M5x6.
7
Mohato oa 3 - Lokisa li-brackets tsa skrine ( B2-SBRAC ) ho foreimi ea deske ka li-screw tse 10 tsa M6x10.
8
EPS ( 900mm H Eco Panel ) Ho kenngwa ha phanele ya skrine Mohato wa 1 – Kenya masakana a skrineng(B2-SBRAC) letsohong la terei ya thapo (B2-SSARM)ka 10 PCS M6x10 Screw
Masakaneng a lebisa moo linepe li hlahang.
Mohato oa 2 - Beha karolo ea EPS holim'a masakaneng a skrine U sebelisa 6mm drill bit (e sa kenyelelitsoe), phunya masoba ho Eco Panel Screen ho latela likoti tsa bracket tse ka morao (Hlokomela: Carbide Drill Bits Work Best For PET panel) - Beha 8 x Double Ended Bolts M5* 32mm - 6mm (B2) o entse likoti tsa AC ka har'a bracket ea hau. Eco Panel Screen. Tiisa bolt e qetellang habeli ka senotlolo sa Allen.
9
Litokomane / Lisebelisoa
 |
HALO HAFH-RF Static Fixed Height Return Frame [pdf] Buka ea Taelo HAFH-RF, HAFH-RF Static Fixed Height Return Frame, Static Fixed Height Return Frame, Foreimi e tsitsitseng ea ho Khutlisa Height, Height Return Frame. |