YNF Smart Plug APP
Product Information
Specifications
- Product Name: YNF Smart Plug
- Compatibility: Requires Alexa Echo for operation
- Supported Alexa Devices: Echo 2nd-4th Gen, Echo Dot 2nd-5th Gen, Echo Plus 1st-2nd Gen, Echo Show, Echo Studio
- Control App: Amazon Alexa App
- Wireless Network: Bluetooth Low Energy (BLE) Mesh
- Signal Range: Up to 100 feet in an open environment
Product Usage Instructions
Pairing the Plugs
To pair the smart plugs, follow these steps:
- Ensure your Alexa Echo device is turned on and connected to the internet.
- Use voice commands with your Alexa Echo device to pair the plugs. No app is required for this process. Refer to the video for more details:
Pairing Plugs with Alexa Echo.
Controlling the Plugs
To control the smart plugs, use the Amazon Alexa App. The app allows you to:
- Remotely control the plugs
- Create groups for simultaneous control
- Schedule on/off timings
- Change plug names
Setting Timers
You can set timers for the smart plugs using either voice commands or the Alexa app.
Voice Command Settings:
- Use your Alexa Echo device to set timers with voice commands.
For example, say “Alexa, turn on the first plug at 4:15 pm.” Refer to the video for more details:
Setting Timers with Voice Commands.
App Settings:
- Open the Alexa app and navigate to the smart plug settings.
- Select the desired plug and set the timer according to your preferences. Refer to the video for more details:
Setting Timers with the Alexa App.
Troubleshooting
If the smart plug doesn’t work, follow these steps:
- Ensure your Alexa Echo device is online and functioning properly.
- Check if the smart plug is turned on/off correctly using the physical key.
- If the above steps fail, repower the plug within 10 feet of the Alexa Echo device and check if it works again.
- If the issue persists, reset the plug by pressing the button for 5 seconds until the LED flashes. Then perform voice pairing again.
Frequently Asked Questions (FAQ)
Q: Can the smart plug work without Alexa Echo?
A: No, Alexa Echo is required for this smart plug to work.
Q: What app can be used to control the smart plugs?
A: The Amazon Alexa App can be used to control the smart plugs.
It offers remote control, group control, scheduling, timing, and name change functions.
Q: Can the smart plug work under a 5G WiFi network?
A: The smart plug works under a 5G network via Alexa Echo.
Q: What is the signal range of the smart plug?
A: The signal can reach up to 100 feet in an open environment.
However, obstacles like walls or doors may reduce the distance. The signal range can be expanded through BLE mesh.
Q: How do I reset the smart plug?
A: To reset the smart plug, press the button for 5 seconds until the LED light flashes blue to enter pairing mode.
Q: How many plugs can one Alexa Echo support?
A: One Alexa Echo device can support up to 10 plugs.
Q: Does the smart plug support Homekit, Google Home, Smartlife, or Smarthings?
A: No, the smart plug only works with Alexa and does not support Homekit, Google Home, Smartlife, or Smarthings.
Q: Can the smart plug work with only the Alexa App and without an Alexa Echo device?
A: No, an Alexa Echo device is required as a hub for the smart plug to work.
Q: Is this a WiFi smart plug?
A: No, it is a Bluetooth Low Energy (BLE) Mesh smart plug.
Question 1: Can it work without Alexa Echo?
Question 2: How to pair plugs?
Question 5: What can I do if the smart plug doesn’t work?
Question 6: How does it work under 5G wifi network?
Question 7: What is its signal range?
Question 8: How to reset it?
Question 9: How many plugs can one Alexa Echo support?
Question 10: Can smart plugs support Homekit, Google home, Smartlife, Smarthings ?
Question 11: Can it work if only Alexa App but without Alexa Echo device?
Question 12: Is this a WiFi smart plug?
Documents / Resources
 | YNF Smart Plug APP |
References
- drive.google.com/file/d/1fECPFI5CeOSDMQR-x6osPWN4rqo5RVdi/view?usp=sharingdrive.google.com
- drive.google.com/file/d/1p_46X-ebF0YDYKITB7VvRSRIZDg83QQ9/view?usp=sharing）drive.google.com
- drive.google.com/file/d/1QzlgbfjidxcYGNnTiUwl3L1D6X0g3tIZ/view?usp=sharingdrive.google.com
- User Manualmanual.tools
mi nombre es Gerardo yo compré varios enchufes inteligentes de marca YNF PERO NO PUDE CONFIGURARLOS CON ALEXA NO SE DEJARON EMPAREJAR LO CONE UNCTE Y LA LLAVE DE ENCENDIDO Y APAGADO PRENDIA Y APAGABA TODO EL TIEMPO DEJANDO PASAR CORRIENTE Y NO APAGABA AL PULSAR LA LLAVE
How do I pair my YNF Smart Plug with Alexa and troubleshoot it if it won't turn off or pair?
To pair your YNF Smart Plug with Alexa and troubleshoot the issues you are experiencing, please follow these steps based on the official guide:
Note: If the physical button on the plug does not cut power even when pressed manually, the internal relay may be defective. If the reset and repower steps do not fix the constant power flow, the unit may need to be replaced.
Read the full Q&A page