YHDC SCT024TSL Split Core Current Transformer Instruction Manual

Product features

• Secure locking buckle, easy to install
• Leading wire output (Three lead specifications)
• Can customize a variety of output
• Suspended mounting

Product application

• Portable instrument
• House hold metering
• Monitoring the load of machine

Product advantage

• Small volume, Light weight
• Low cost
• High turns, High precision

Installation diagram

1. Open the buckle
   
2. Open upward
   
3. Put in lead wire
   
4. Fasten the buckle
   

Typical technical index:

• Material of core——Silicon steel sheet
• Working voltage——Phase voltage ≤ 720 V
• Working temperature——-25℃～+60℃
• Storage temperature——-30℃～+90℃
• Frequency range——50Hz～60Hz
• Dielectric strength—— input (Bare conductor)/output AC 800V/1min 5mA 50Hz output/outshell AC 3.5KV/1min 5mA 50Hz）
• Weight————220g

Electrical parameters

(The following parameters are typical values. The actual values shall be subject to the

1A output type						Dimensions: 1
Model	Input current AC	output AC	Turns ratio	Accuracy	Lead specification Leading wire  specification: 0.5mm 2 Black and white twisted pairlead length： 00cm~105cm Lead wire  Color: white, black	Diagram
SCT024TSL	50A	1A	50 : 1	1%		current output type. the secondary is not allowed to open.
SCT024TSL	100A	1A	100 : 1	0.5%/1%
SCT024TSL	150A	1A	150 : 1	0.5%/1%
SCT024TSL	200A	1A	200 : 1	0.5%/1%
SCT024TSL	250A	1A	250 : 1	0.5%/1%
SCT024TSL	300A	1A	300 : 1	0.5%/1%
SCT024TSL	350A	1A	350 : 1	0.5%/1%
SCT024TSL	400A	1A	400 : 1	0.5%/1%

5A output type						Dimensions: 1
Model	Input current AC	output AC	Turns ratio	Accuracy	Lead specification	Diagram
SCT024TSL	100A	5A	100:5	5%	Leading wire specification: 2.5mm² soft wire lead length：100cm~105cm Lead wire Color: white, blue	current output type. the secondary is not allowed to open.
SCT024TSL	150A	5A	150:5	1%
SCT024TSL	200A	5A	200:5	0.5%/1%
SCT024TSL	250A	5A	250:5	0.5%/1%
SCT024TSL	300A	5A	300:5	0.5%/1%

mA output type						Dimensions: 2
Model	Input current	output current	Turns ratio	Accuracy	sampling resistance	Lead specification/schematic diagram
SCT024 TSL	50A	50mA	1:1000	0.5%/1%	20Ω	Leading wire specification: 2×0. 2 mm 2 Two core shielded wire lead length：100cm~105cm TVS: Transient voltage suppressor(7.5V) current output type. the secondary is not allowed to open.
SCT024 TSL	100A	50mA	1:2000	0.5%/1%	20Ω
SCT024 TSL	200A	20mA	1:10000	0.5%/1%	50Ω
SCT024 TSL	200A	50mA	1:4000	0.5%/1%	20Ω
SCT024 TSL	300A	50mA	1:6000	0.5%/1%	20Ω
SCT024 TSL	400A	50mA	1:8000	0.5%/1%	20Ω
SCT024 TSL	400A	80mA	1:5000	0.5%/1%	20Ω
SCT024 TSL	400A	100mA	1:4000	0.5%1%	8Ω

0.333V/1V/3V/5VAC voltage output type					Dimensions: 2
Model	Input current	Output    AC voltage	Accuracy	Load impedance	Lead specification/schematic diagram
SCT024 TSL	50 A	0.333V or 1V or 3V or 5V	0.5%/1%	≥10KΩ	Leading wire specification: 2×0. 2 mm 2 Two core shielded wire lead length：100cm~105cm sampling resistance built-in voltage output type not allowed secondary short circuit
SCT024 TSL	100 A
SCT024 TSL	200 A
SCT024 TSL	300 A
SCT024 TSL	400 A

Dimensions 1: (in:mm±0.5)

Dimensions 2: (in:mm±0.5)

Standard Ф3.5mm three-pin plug diagram

www.poweruc.pl

Documents / Resources

YHDC SCT024TSL Split Core Current Transformer [pdf] Instruction Manual SCT024TSL Split Core Current Transformer, SCT024TSL, Split Core Current Transformer, Split Core Transformer, Current Transformer, Split Transformer, Core Transformer, Transformer

References

• User Manual