XYZ ATOM Tower PC Instruction Manual

XYZ ATOM Tower PC

Specifications

Package Details

Schematic Diagram of Wire Interface

Please refer to the manual that came with your motherboard for any specific connection instructions.

Product Size

Dimensions: 360mm x 218mm x 380mm

Front Panel Interface

• POWER
• HD AUDIO
• RESET/ARGB Change

Machine Overview

• Top view
• Front view
• Left view (open side panel)
• Right view (open side panel)
• Back view
• The bottom view

Chassis Disassembly Diagram

Illustration of disassembling the chassis components.

Installation 

Remove and Install Side Panels
Remove the glass side panel by clip (without screws).

• Remove the glass side panel: by Clip (without screws).
• Remove the iron side plate: remove the two screws at the rear.

The Power Supply Installation
The power supply can be fixed by aligning the screw in the figure to the hole position. Note: Different types of power supply, and hole locations may be slightly different; take the actual object as the standard.

Motherboard Installation
According to the motherboard type (M-ATX/ITX), the copper pillars may need to be re-arranged manually according to the fixing locations specific to your motherboard. CPU Height limit: 185mm.

The Graphics Card Installation
Max Length: 300mm

Panel Disassembly
To remove the front panel of the case, pull it by hand, firmly from the bottom of the panel.

Fan Installation
Fan compatibility:

• Front: 2 x 120mm
• Rear: 1 x 120mm
• Top: 2 x 120/140mm
• PSU cover: 2 x 120mm

Water Cooling Installation
Radiator Support:

• Top: 240mm
• Rear: 120mm

SSD Installation
Align the SSD holes and fix them with screws. 2 x SSD

HDD Installation
Align the hard disk holes and fix them with HDD screws. 2 x HDD

PWM Function + ARGB Controller User Instruction
Diagram showing the connection and function of PWM and ARGB controller components.

1. Connected with 3 pcs small PWM 4PIN.
2. SATA power connector (PSU).
3. Interface for 5V3PIN LED wire, support 6pcs FANs.
4. Can switch to the computer reset button.
5. PWM speed adjusting line.
6. Universal link to motherboard 5V 3pin connector. To use this feature, hold down the reset key for 5 seconds.

Find out more about us at www.xyzpcgear.com

FAQ

How do I remove the side panels?
Remove the glass side panel by clip (without screws) and the iron side plate by removing the two screws at the rear.

How do I install the power supply?
The power supply can be fixed by aligning the screw to the hole position. Note that the hole location may vary slightly depending on the power supply type.

What are the fan installation options?
Fans can be installed as follows: Front: 2 x 120mm, Rear: 1 x 120mm, Top: 2 x 120/140mm, PSU cover: 2 x 120mm.