USER MANUAL OF
KS-1 TOYOTA SMART KEY
SIMULATOR
SHENZHEN XTOOLTECH CO., LTD
STEP BY STEP
PROCESS
Smart Key Emulator for All Keys Lost
www.xtooltech.com
SHENZHEN XTOOLTECH CO., LTD
- Select: Immobilization-〉TOYOTA-〉All smart keys lost
- Select “Read immobilizer data” to read vehicle immobilizer data
- According to the prompt, please press the car’s START button to read the data.
It will show the completion ratio of the read data as below:
- After reading the data, please save the data and name the saved file
After saving, the saved information will be shown as below:
- When general ingKS-1Toyotasimulator key, please connect KC100 orKC501first( Please noticed the device ust be connected to the network). Click the “Generate emulated key” button.
- And then click the OK button to select the file saved in the previous step.
- After the document selection is completed, the screen will display the current key type, please click Yes or No button to confirm whether it is correct.
- After confirmation, the system will upload data to the Xtool server for data verification and calculation.
- After verification, it will activate KC100 or KC501.
- Please put the KS-1simulator card into the KC100’s or KC501’s slot and follow the instructions to complete the next operation.
- Please click Yes to the next step. (This operation will make the device bound with KS-1 Toyota simulator card)
- Binding succeed.
- After the binding is successful, the simulator key is generated.
- Generated successfully.
- After generating the simulation key successfully, select “Add key” to do add keys.
- Please follow prompts for relevant operations.
- The device will prompt Programming success.
USER MANUAL OF
KS-1 TOYOTA SMART KEY
SIMULATOR
STEP BY STEP
PROCESS
SHENZHEN XTOOLTECH CO.LTD
www.xtooltech.com
Documents / Resources
 |
XTOOL KS-1 Smart Key Emulator for All Keys Lost [pdf] User Manual KS-1, Smart Key Emulator for All Keys Lost, Smart Key Emulator, Key Emulator, KS-1, Emulator |
